Macbook pro will not wake up using default wifi

I have to select the default wifi each time i wake up the system at home. When it wakes up it does not wake up with the default selected. My default wifi is the only wifi used.

Make sure you are using the most recent OS X update for the version you have. Run Software Update.
Then, go to System Preferences > Network, select Wi-Fi, then the Advanced... button. If more than one network appears, delete those that you do not routinely want to use with the "–" (minus) button. Press OK, then Apply.
If your MBP still does not automatically reconnect upon wake from sleep, delete the file
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
... and restart your Mac.
To find that file quickly, select the above path (triple-click the line), control-click to bring up the contextual menu, and select Services > Reveal. Drag that file to the Desktop, or directly to the Trash.
This will completely erase your AirPort network preferences, requiring that you select your Wi-Fi network and authenticate again.
If nothing else helps, try turning off Bluetooth if you do not require it. BT interference was suspected in preventing automatic reconnections to preferred networks upon wake from sleep, though this was never confirmed.

Similar Messages

  • My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    try this.
    get back into your router's settings and start deleting devices that are not connected to your router.
    you can also delete the ones that are connected - they'll connect again.
    on the DHCP side of it, increase the amount of users that can connect/log in to your router.
    see if that sorts it out for you.
    good luck.

  • HT4628 My macbook pro will not automatically reconnect to the wifi after a sleep. This has started after having upgraded to mountain Lion (10.8).

    Hi
    After I have installed Mountain Lion (10.8) - my macbook pro will not connect automatically to my preferred wifi network. It used to do that on the previous versions. It seems that the mac does not recognize the preferred network, as it asks me to choose a network after evey sleep/restart. I have modified the network preference to have my preferred netwrok at the top of the list. I have tried with/without checking the "ask me before joining a new network". It still behaved the same.
    Thanks
    Eitan

    Try making a new network connection and renewing the DCHP lease as detailed here:
    fix-os-x-mountain-lion-wireless-connection-problems

  • MacBook Pro will not wake up under Windows 7

    Note: I've just installed Boot Camp 3.1 and the problem persists.
    The first time I put the computer to sleep (by closing the lid) under Windows 7 x64, it will sleep and wake no problem. The sleep indicator will flash. If I try to put it to sleep a second time at a later time, the sleep indicator will not flash and instead stay bright. By opening the lid, the light goes off, but the computer will not wake, forcing me to hard reset.

    I have had this problem since I got my late 2008 Unibody Macbook Pro. I have posted the problem here many, many times and never have gotten a solution. I have escalated this to Apple support too many times to recall and I keep getting told that this is a Windows fault and only happening to me. Despite me pointing them to these support forums showing many people having this issue. Apple refuse to admit anything is wrong. I eventually got my money back after taking the case to consumer affairs. Joyous.
    Hope you have better luck!

  • Macbook pro will not wake from sleep without shut down?

    My macbook pro 2007 will not wake from sleep without holding down start button and then restarting? Is this a serious problem?

    You can Try resetting NVRAM/PRAM http://support.apple.com/kb/ht1379
    You can run the Disk Utility> Repair Disk from Recovery ( command R on start)
    if that does not sort it I would reinstall OS X

  • MacBook Pro will not wake from sleep

    My new 13" MacBook Pro will occasionally refuse to wake from sleep. Touching the keyboard or moving the mouse will turn on the keyboard background lights but the computer will not wake. This occurs without any peripherals attached.  I have reset the PRAM and the SMC ... no help.
    The only option for recovery is the hard power down with the power button and restart. Anyone else seeing this?

    Yes and I hate it. I am having pretty much the same problem, and have tried the same solutions, also Iupgraded to Lion and there still has been no relief. My computer just runs slower.

  • HT203176 MacBook Pro will not wake up from sleep

    My MacBook Prof laptop will not awaken from sleep sometimes. The laptop could be left open and I walk away for awhile. Come back and it is in the black screen status. When I hit a key to wake it up....it won't. Have to hold the power key down for several seconds to turn it off, then push power key to turn back on. Also, sometimes I close the lid and walk away. Come back several hours later and it will not wake up. Went to the Apple store a few weeks ago. They ran a quick diagnostic on my hardware and said it was all fine. They suggested they wipe clean the hard drive and I start fresh. We did and everything was fine for a few weeks. Now it starting all over again? Very frustrating and time consuming to have to restart your computer multiple times a day.
    Any suggestions or thoughts? Could it be a hardware issue? Should I let the Apple store run the 7 hours hardware test?
    Thanks.

    "Applecare expired recently."
    How recently? I would still give them a call. You may be surprised at the outcome.
    See Article: http://support.apple.com/kb/TS2377 *MacBook Pro: Distorted video or no video issues*
    !http://i50.tinypic.com/izvwo1.gif!

  • MacBook Pro will not wake, holding power button does not shut it down either

    My mbpro will not wake and even holding down the power button will not shut it down. Any ideas?  Thanks.

    You can force quit a shut down by holding the power button for a extended amount, say ~10 sec or so.
    The try resetting the  SMC http://support.apple.com/kb/ht3964

  • Macbook pro will not wake up and shows black screen

    Purchased a MBP three weeks ago.  After putting the MBP to sleep it will not wake up.  Shows black screen and makes fan sound but will not start unless power off and then on again and at times this does not work. 

    Hi a,
    Try an SMC Reset: http://support.apple.com/kb/HT3964
    If no luck, you have 90 days of free AppleCare phone support and a one year warranty. Contact AppleCare or make an appointment at an Apple Store "genius" bar.

  • Macbook pro will not wake up

    My 15" MacBook Pro seems to be "asleep" and I haven't been able to "wake" it up for over a day now. Even after I hold the power button down for 10 seconds it still will not reboot.

    Hold the power button for five seconds to force shutdown, and then push the power button again to restart.
    I would do a SMC reset too:
    http://support.apple.com/kb/ht3964

  • My MacBook Pro will not "wake up" once it goes to sleep.  Mac OS 10.6.8  Please advise.  Thanks!

    My MacBook Pro 10.6.8 will not respond to any key of pad once it goes to sleep.  I need to hold the power button down, then close the lid, open the lid and hit the power button for it to re-boot.  I have tried having Disk Utility fix permissions and that has not helped.  I would sure appreciate any and all asistance.
    Thanks!
    Bob

    Sleep – Slow Wakeup/Requires Reset

  • MacBook Pro will not wake up from sleep

    When I left for work, my MBP (2007) was working fine, I put it to sleep).
    When I got back from work, I tried to wake it up, and nothing.
    I powered it down and tried to reboot. Nothing, not even the chime.
    I pulled the battery, and held the start button for 10 seconds.
    Tried to reboot with and without the battery; no chime, dark display.
    Sounds like my firmware fried, and Applecare expired recently.
    Any suggestions appreciated.

    "Applecare expired recently."
    How recently? I would still give them a call. You may be surprised at the outcome.
    See Article: http://support.apple.com/kb/TS2377 *MacBook Pro: Distorted video or no video issues*
    !http://i50.tinypic.com/izvwo1.gif!

  • Macbook pro will not "wake up" after going into powersave mode?

    I've tried everything. I hit the enter key any key for that matter, reclosing the macbook or even giving it a few moments. I've had some issues with it lately. Like a kernel panic last week, tried a disk utility repair option. Fixed some things but NOT this. any ideas? I think we had a recent update like two, three weeks ago this is becoming annoying. Is my macbook dying? The only time my macbook comes back to life is if I hit the power button for a few seconds. Then a grey screen appears along with a black screen then my regular screen.

    Hello, Libracious,
    It sounds much like your system may be entering what is referred to as 'Safe Sleep.'
    Mac computers: Progress bar appears after waking from sleep
    http://support.apple.com/kb/HT1757
    Safe Sleep ensures that data stored in main memory will not be lost should the computer shut down due to the battery being drained completely . Prior to your computer entering sleep, Safe Sleep automatically saves the contents of main memory—such as desktop settings, open applications, and other work in progress—to the hard drive.
    There are two situations in which a computer will enter safe sleep:
    In the event the battery becomes completely depleted while the computer is asleep, the computer will shut down. But when a power adapter is connected or a freshly charged battery is installed, the computer can be restarted. Press the power button as if turning the computer on and it will automatically return to the desktop state that existed prior to entering sleep. This means that applications and files will remain exactly as they were prior to the computer being put to sleep, making it easy for you to continue with your work.
    With the release of the OS X Mountain Lion v10.8.2 supplemental update 2.0, a new feature was introduced to enter safe sleep after four hours of the computer being connected to AC power. This is an effort to comply with the European Energy Standards (ErP Lot6). This will only occur if there is no wireless or Ethernet activity and no activity from external devices such as USB storage devices.
    Cheers,
    Allen

  • MacBook Pro will not wake on Mavericks

    Since upgrading to Mavericks whenever my 15" Retina MacBook Pro sleeps it won't wake and I have to do a hard restart. It also crashes Chrome and parallels. Anyone else having similar problems?

    Yes! I just posted this same question. Having this issue on my imac.

  • Macbook Pro will not reliably connect to our wifi router  - any suggestions?!

    Hi
    My partner has recently bought a second-hand (but fully functional) Macbook Pro running OS X 10.5.8 to set up in our home office.
    Our wireless router is not in the same room (it's in the living room via the hallway) but no other computer or device in the house has any problems detecting and connecting to the router.
    My partner's pc netbook and my iPhone 4S connect fine all through the flat. My iMac (located in the office) also has no problems.
    We have managed to get the Pro connected to the internet wirelessly a couple of times in the living room (although not all the time) but as soon as it is moved into the office the connection cannot be found or successfully connected to.
    Can't help but think that there's some little setting or something that we've not done that is causing the problem - seems odd that all the other devices connecting have never had any issues! I'm not completely technically minded, but have had enough experience with computers to feel fairly confident on them - just wondered if anyone might be able to suggest anything?
    The Network Preferences pages don't seem to be any help to me - I've tried several things in there that would usually help to rectify a troublesome connection.
    Any help or advice would be so much appreciated - my partner bought this Macbook Pro to replace her netbook and a reliable online connection is paramount as she is designing websites etc. with it!
    Thanks,
    Jimbanzee

    Hi JohnTh
    Thanks for your suggestion (and apologies that it's taken forever for me to try this out and get back to you)!
    I think I've done what you suggested but I think my lack of computer knowledge is letting me down as it did not work.
    I went to Network in System Preferences whilst connected to the internet via Ethernet cable, and managed to connect to my router, I then locked the changes, removed the cable and then restarted but straight away upon logging in, it had lost the changes and was unable to find the wireless connection.
    To be honest, it will not always find it when the ethernet cable is plugged in - in fact, I've witnessed it go from green light connection, having found the router and getting an ip address to amber without the ip address to not being able to locate the router (all whilst still plugged in on ethernet) within the space of about two minutes!
    I'm a bit hazy on the details of your suggestion when you say:
    Go to the wireless setup from here, and change the name to something that you can recognise. Make sure that it is password protected. Save it so that it'll write itself to its flash memory (your network will briefly not work).
    I went to the Network page of System Preferences straight away - is there somewhere else I should do the wireless setup? Our wireless connection is (as it is on my iMac which connects fine wirelessly) protected with a WPA2 Personal password.
    How do I save it so that the setup will write itself to it's flash memory? Sorry not sure where this is!
    I have also tried to remove the 'remembered' network from the advanced airport settings using the '-' button and then adding it '+' back in, but this also does not seem to work.
    We are planning on upgrading the operating system from 10.5.8 once we can get a secure connection - my partner is happy that she can connect to the internet via Ethernet cable but she is wanting to sell her PC netbook (in order to part fund the purchase of the Macbook Pro) and she's not happy to do so until she can connect wirelessly successfully!
    Finally, thanks for all your help and suggestions - really appreciate it and hope to find a solution!
    Jimbanzee

Maybe you are looking for

  • Having problems with iPhone coverflow

    I have a problem with the iPhone coverflow : some album artworks appear 2 times on coverflow with the same song in the 2 of them, like if i had the song 2 times, and the other thing is that, for example, i normally have 4 songs on that album but on c

  • Terminal command to refresh USB peripheral device

    I'm running OS 10.7.5, and I have a recurring problem with the USB ports on my Mac mini.  After several days of up-time, one or more of the ports will sometimes become non-responsive.  This seems to be software related, because logging off and loggin

  • HT2188 Do you need internet to access Nike workout on your ipod?

    I was trying to make the Nike+ipod works and I doubt if you need an internet to work on it. Do we really?

  • DiscOs3: I/O error...S/O error (4,12806)...No disc. Will not start in safe

    I am not familiar with self-repair, and that's why I quit the PC! The PowerBook turned grey, I restarted and then the endless spinning pinwheel. I do not have the startup disc for OSX I am unable to reboot, check fsck in safe mode I get the following

  • Big delay opening first image:  ?

    On opening first image, sniffer_gpu runs, takes 30-45 seconds to query the gpu.  Then it terminates, and Photohop goes into "not responding" mode for 30-45 sec.  After the first image, everything works fine.  PS6 extended, I7 cpu, 64-bit, 32 gb ram,