Macbook pro will not wake up

My 15" MacBook Pro seems to be "asleep" and I haven't been able to "wake" it up for over a day now. Even after I hold the power button down for 10 seconds it still will not reboot.

Hold the power button for five seconds to force shutdown, and then push the power button again to restart.
I would do a SMC reset too:
http://support.apple.com/kb/ht3964

Similar Messages

  • MacBook Pro will not wake up under Windows 7

    Note: I've just installed Boot Camp 3.1 and the problem persists.
    The first time I put the computer to sleep (by closing the lid) under Windows 7 x64, it will sleep and wake no problem. The sleep indicator will flash. If I try to put it to sleep a second time at a later time, the sleep indicator will not flash and instead stay bright. By opening the lid, the light goes off, but the computer will not wake, forcing me to hard reset.

    I have had this problem since I got my late 2008 Unibody Macbook Pro. I have posted the problem here many, many times and never have gotten a solution. I have escalated this to Apple support too many times to recall and I keep getting told that this is a Windows fault and only happening to me. Despite me pointing them to these support forums showing many people having this issue. Apple refuse to admit anything is wrong. I eventually got my money back after taking the case to consumer affairs. Joyous.
    Hope you have better luck!

  • Macbook pro will not wake from sleep without shut down?

    My macbook pro 2007 will not wake from sleep without holding down start button and then restarting? Is this a serious problem?

    You can Try resetting NVRAM/PRAM http://support.apple.com/kb/ht1379
    You can run the Disk Utility> Repair Disk from Recovery ( command R on start)
    if that does not sort it I would reinstall OS X

  • MacBook Pro will not wake from sleep

    My new 13" MacBook Pro will occasionally refuse to wake from sleep. Touching the keyboard or moving the mouse will turn on the keyboard background lights but the computer will not wake. This occurs without any peripherals attached.  I have reset the PRAM and the SMC ... no help.
    The only option for recovery is the hard power down with the power button and restart. Anyone else seeing this?

    Yes and I hate it. I am having pretty much the same problem, and have tried the same solutions, also Iupgraded to Lion and there still has been no relief. My computer just runs slower.

  • HT203176 MacBook Pro will not wake up from sleep

    My MacBook Prof laptop will not awaken from sleep sometimes. The laptop could be left open and I walk away for awhile. Come back and it is in the black screen status. When I hit a key to wake it up....it won't. Have to hold the power key down for several seconds to turn it off, then push power key to turn back on. Also, sometimes I close the lid and walk away. Come back several hours later and it will not wake up. Went to the Apple store a few weeks ago. They ran a quick diagnostic on my hardware and said it was all fine. They suggested they wipe clean the hard drive and I start fresh. We did and everything was fine for a few weeks. Now it starting all over again? Very frustrating and time consuming to have to restart your computer multiple times a day.
    Any suggestions or thoughts? Could it be a hardware issue? Should I let the Apple store run the 7 hours hardware test?
    Thanks.

    "Applecare expired recently."
    How recently? I would still give them a call. You may be surprised at the outcome.
    See Article: http://support.apple.com/kb/TS2377 *MacBook Pro: Distorted video or no video issues*
    !http://i50.tinypic.com/izvwo1.gif!

  • MacBook Pro will not wake, holding power button does not shut it down either

    My mbpro will not wake and even holding down the power button will not shut it down. Any ideas?  Thanks.

    You can force quit a shut down by holding the power button for a extended amount, say ~10 sec or so.
    The try resetting the  SMC http://support.apple.com/kb/ht3964

  • Macbook pro will not wake up and shows black screen

    Purchased a MBP three weeks ago.  After putting the MBP to sleep it will not wake up.  Shows black screen and makes fan sound but will not start unless power off and then on again and at times this does not work. 

    Hi a,
    Try an SMC Reset: http://support.apple.com/kb/HT3964
    If no luck, you have 90 days of free AppleCare phone support and a one year warranty. Contact AppleCare or make an appointment at an Apple Store "genius" bar.

  • My MacBook Pro will not "wake up" once it goes to sleep.  Mac OS 10.6.8  Please advise.  Thanks!

    My MacBook Pro 10.6.8 will not respond to any key of pad once it goes to sleep.  I need to hold the power button down, then close the lid, open the lid and hit the power button for it to re-boot.  I have tried having Disk Utility fix permissions and that has not helped.  I would sure appreciate any and all asistance.
    Thanks!
    Bob

    Sleep – Slow Wakeup/Requires Reset

  • MacBook Pro will not wake up from sleep

    When I left for work, my MBP (2007) was working fine, I put it to sleep).
    When I got back from work, I tried to wake it up, and nothing.
    I powered it down and tried to reboot. Nothing, not even the chime.
    I pulled the battery, and held the start button for 10 seconds.
    Tried to reboot with and without the battery; no chime, dark display.
    Sounds like my firmware fried, and Applecare expired recently.
    Any suggestions appreciated.

    "Applecare expired recently."
    How recently? I would still give them a call. You may be surprised at the outcome.
    See Article: http://support.apple.com/kb/TS2377 *MacBook Pro: Distorted video or no video issues*
    !http://i50.tinypic.com/izvwo1.gif!

  • Macbook pro will not "wake up" after going into powersave mode?

    I've tried everything. I hit the enter key any key for that matter, reclosing the macbook or even giving it a few moments. I've had some issues with it lately. Like a kernel panic last week, tried a disk utility repair option. Fixed some things but NOT this. any ideas? I think we had a recent update like two, three weeks ago this is becoming annoying. Is my macbook dying? The only time my macbook comes back to life is if I hit the power button for a few seconds. Then a grey screen appears along with a black screen then my regular screen.

    Hello, Libracious,
    It sounds much like your system may be entering what is referred to as 'Safe Sleep.'
    Mac computers: Progress bar appears after waking from sleep
    http://support.apple.com/kb/HT1757
    Safe Sleep ensures that data stored in main memory will not be lost should the computer shut down due to the battery being drained completely . Prior to your computer entering sleep, Safe Sleep automatically saves the contents of main memory—such as desktop settings, open applications, and other work in progress—to the hard drive.
    There are two situations in which a computer will enter safe sleep:
    In the event the battery becomes completely depleted while the computer is asleep, the computer will shut down. But when a power adapter is connected or a freshly charged battery is installed, the computer can be restarted. Press the power button as if turning the computer on and it will automatically return to the desktop state that existed prior to entering sleep. This means that applications and files will remain exactly as they were prior to the computer being put to sleep, making it easy for you to continue with your work.
    With the release of the OS X Mountain Lion v10.8.2 supplemental update 2.0, a new feature was introduced to enter safe sleep after four hours of the computer being connected to AC power. This is an effort to comply with the European Energy Standards (ErP Lot6). This will only occur if there is no wireless or Ethernet activity and no activity from external devices such as USB storage devices.
    Cheers,
    Allen

  • MacBook Pro will not wake on Mavericks

    Since upgrading to Mavericks whenever my 15" Retina MacBook Pro sleeps it won't wake and I have to do a hard restart. It also crashes Chrome and parallels. Anyone else having similar problems?

    Yes! I just posted this same question. Having this issue on my imac.

  • Macbook pro will not wake up using default wifi

    I have to select the default wifi each time i wake up the system at home. When it wakes up it does not wake up with the default selected. My default wifi is the only wifi used.

    Make sure you are using the most recent OS X update for the version you have. Run Software Update.
    Then, go to System Preferences > Network, select Wi-Fi, then the Advanced... button. If more than one network appears, delete those that you do not routinely want to use with the "–" (minus) button. Press OK, then Apply.
    If your MBP still does not automatically reconnect upon wake from sleep, delete the file
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    ... and restart your Mac.
    To find that file quickly, select the above path (triple-click the line), control-click to bring up the contextual menu, and select Services > Reveal. Drag that file to the Desktop, or directly to the Trash.
    This will completely erase your AirPort network preferences, requiring that you select your Wi-Fi network and authenticate again.
    If nothing else helps, try turning off Bluetooth if you do not require it. BT interference was suspected in preventing automatic reconnections to preferred networks upon wake from sleep, though this was never confirmed.

  • Brand new macbook pro will not wake from sleep

    i have a lovely brand new mbp running 10.6 and 50% of the time -if i put it to sleep -it freezes and i have to hold the power button down to restart it. this cannot be right? it is 2 weeks old. should i send it back?
    pete
    ps my macbook air has never been rebooted and i've had it a year! it loves sleep...
    p

    I have a similar issue with my MBP, it's been on-going for a while but I just never had time to stop and deal with it.
    This week I had a new logic board put in, low and behold it's still doing it (I get a kernel panic after resume).
    Trying to track it down myself now. AHT and everything says the hardware is fine, fresh install (erase with 0 on disk) and all updates, no 3rd party software.

  • My Mid 2010 MacBook Pro will not boot

    My Mid 2010 MacBook Pro will not boot regularly, in safe mode, in recovery mode or from original OS DVD. Is this the logic board?
    I've tried resetting the SMC and pram numerous times and even tried switching out hdd's to try and do a clean install on a new hdd.
    If I attempt to boot regularly or from recovery drive the grey apple logo appears for a period before the screen goes black and the power LED operates as though in 'sleep' mode. I'm unable to wake it from this state and the same applies to booting in safe mode.
    When attempting to boot from the OS DVD that was originally packed with the computer it just freezes on the language select option, this occurs with the other hdd's I have attempted to use.
    Any other suggestions to get it working? I fear the logic board has gone and that the repair won't be worth the money.
    Thank you in advance.

    Hi JRC8.8,
    It sounds like you have been on the right track in trying to troubleshoot this issue. You may want to see if your MacBook Pro will boot directly to the Apple Hardware Test, as outlined in the following article:
    Apple Support: Using Apple Hardware Test
    http://support.apple.com/kb/ht1509
    Regards,
    - Brenden

  • Macbook PRo will not boot, MagSafe adaptor light does not work !

    Okay... so i have this issue with my MBP where it will not power up.
    The light on the magsafe does not show up at all when connected to the MBP. I have tried another magsafe but failed. I have not tried another battery so im not sure if that is wheret the fault lies.
    Ive tried the SMC reset holding the power button down for long, but still no result. However, i left the MBP disconnected from the magsafe and went out for the whole day. Came back, connected the magsafe and thought id try again. I held the power button for 10 seconds and the MBP started booting. It wasnt the normal boot im not sure if it was performing some sort of safe boot, but it was doing something, the screen turned transparent white, restarted and i could finally log in. The battery was very low so i left it on charge with magsafe.
    One thing i have noticed is that sometimes i wont get the light showing on the magsafe but it may still be charging at that point.
    This morning i wake up and its the same issue all over again. It must have stopped charging or something as i left the MBP on with magsafe connected. Now it will not turn on no matter what i do.
    If i tilt the magsafe connector at an angle i can see a dim green light but then id have to hold it in that place to see that light.
    Please advise on what i should do next. Excuse the long story !

    Hi s.cheslik,
    It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    Apple - Support - Service Answer Center
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

Maybe you are looking for

  • 'Font contains bad/Widths' and 'Cannot find/create font' errors when saving pdf as Other Reduced Size PDF

    I am exporting .indd files from within Indesign as pdf files, opening in Acrobat Pro XI. I have no trouble creating the initial pdf file, however, when I go to Save Other > Reduced Size PDF I get error messages. Depending on the file, I receive eithe

  • Print OBIEE Pivot Table Red Values in PDF

    Hi All, I am having problem dealing with Pivot table, The values which I want to show red it is happening which is good but problem is when I Print them it will come out as balck values rather than RED. I know I have to change somthing in these two f

  • I need to install C6 onlaptop

    I need to install C6 on my Mac laptop -10.7.4. I bought it for my desktop & I am running it there but need it on my lap top. How to proceed? thanks

  • Jdeveloper warning uses unchecked or unsafe operations

    Greetings: I am getting warnings on my oc4j console that look like : Note: C:\product\10.1.3\OracleAS_1\j2ee\home\application-deployments\pl\plBeans\generated\PlLoginPrefixesEJB_StatelessSessionBeanWrapper9.java uses unchecked or unsafe operations. N

  • Unordered List

    Can anyone tell me how I can use ticks and crosses in dreamweaver instead of bullet points, i have a clinet who has requested both and I cannot for the life of me find a way from within dreamweaver or from googling it. Any help would be appreciated