Macbook pro will only read audio cds

My MacBook Pro2,1 17" will no longer read anything other than Audio CDs in its drive. Any other format and it says the CD is empty. It never used to do this. I wonder if upgrading to Mac OS 10.7 (Lion - which is as far as this hardware will go) will fix this problem, or has the firmware gone awry? (What a great pity they don't make 17" laptops anymore.)

This is not related to my CD problems, for which you have been very helpful, but you may be interested as you seem to be au fait with the older MacBook Pros.
Some time ago, I purchased a new power supply for my Mac which came with a MAGSAFE 1 L-Tip magnetic adapter. The original had been a MAGSAFE 1 T-Tip but it had worn out and the coaxial screen was looking very exposed. All went well until, inevitably, the laptop was dropped. The L-Tip stayed in place and because of its sausage shape, dented the side of the casing. It [the L-Tip] would no longer make contact (because of its long body) so I reverted, very gingerly [an English expression?] to the original T-Tip which still worked. I then ordered what I thought was a new T-Tip supply but when it arrived, turns out there is now a MAGSAFE 2 T-Tip (which of course would not work). Maybe they have abandoned the L-Tip because it is self destructive. I have now finally returned the MAGSAFE 2 and await a MAGSAFE 1 T-Tip. A cautionary tale for those looking for a new power supply.

Similar Messages

  • MacBook Pro won't read audio cds

    My MacBook Pro will not read digital audio cds.
    It has in the past, but now it seems to have stopped reading them.
    I have several purchased cds I would like to get on itunes, but I can't get it to recognize the discs.
    I can hear it spinning several times, like it is trying to access the disc, then it ejects it without mounting.
    It does not appear in iTunes, or anywhere on the desktop.
    It will read and burn blank cds and dvds.
    I havde a 17" MacBook Pro, 2009, with a MATSHITA DVD-R   UJ-868 drive.
    Anyone have any ideas how to get it to work again or what the problem could be?

    yes it could but probably not after testing ten different CDs right? Got the very same scenarion and asked the question again here, pls see https://discussions.apple.com/message/22423010#22423010

  • Macbook Pro will only read on external drive.....

    I got a Maxtor portable external drive, 320gig model, and was able to backup my files from WinXp desktop pc that includes mp3's and mp4 videos. I'm converting to apple and just got a Macbook Pro, 2.4 GHz Intel Core 2 Duo running on Mac OS X v.10.5.4. My question is that I wanted to add some files from my macbook to my external drive but some reason can't. Either the external drive won't let me or my macbook won't.
    I check the info on the external and the drive is formatted to 'windows NT files system.' Does that have anything to do with why I can't make any changes on my external? Does any one have a solution for me? Any suggestions would deeply be appreciated.

    bigjohnny002,
    OS X can read NTFS volumes, but it cannot write to them. There is third-party software (MacFuse) that will allow OS X to write to NTFS volume, however.
    In the absence of this third-party software, you will need to re-format that external. FAT-32 volumes can be created by OS X, and both OS X and Windows can read and write to them, but there is a 4 GB size limit for files stored in this file system.
    If you are not planning on transferring files back to a Windows computer, the best format will be HFS+ (Mac OS Extended). Provided there is enough space on your Macbook Pro, you can copy all the files from the external to the Macbook Pro, use Disk Utility to re-format the drive, then copy the files back.
    Scott

  • My macbook pro will not read inserted cds, why?

    I can't get my laptop to read cd's why?

    MacBook Pro 
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os
    http://www.apple.com/support/macbookpro

  • My MacBook Pro will no read any of my CDs and just goes and spits it back out. Help me?

    My MacBook Pro will not read my CDs and spits them right back out. Any help?

    The drive accepts discs but they do not mount or are automatically ejected
    Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
    Reset the  System Management Controller (SMC).
    Ensure your drive can read the specific type of disc being used. For example a "combo drive" can read a DVD-R and burn a CD-R however it cannot burn a DVD-R. The utility System Profiler may provide additional information regarding what media your computer supports.
    If the discs continue to not be recognized, please contact Apple, contact an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store for additional troubleshooting, evaluation, or service.

  • Macbook Pro will only allow AirPlay to play through iTunes, therefore I can't play songs through Safari

    Macbook Pro will only allow AirPlay to play through iTunes, therefore I can't play songs through Safari. I have tried going on to the Sound settings and selecting AirPort Express but its just jumps back to internal speakers. Its WELL ANNOYING! Any ideas?

    Macbook Pro will only allow AirPlay to play through iTunes
    This is normal.
    To be able to play any audio source on your MacBook Pro, you might want to take a look at an application like Airfoil. More info below:
    Rogue Amoeba | Airfoil for Mac: Wireless Audio Around ...

  • Macbook Pro will not read CD's.

    My Macbook Pro will not read CD's. They have data on them, but they open up as blank CD's when I insert them into the drive. I know that they are not blank because on another Macbook Pro, they open up just fine. Some CD's will work while others will not. Why would a CD open on another Mac that is just the same?

    I am having a similar problem.
    Mine is a Mid-2009 model that I bought used on Craigslist... and now I notice the problems.
    If I insert a commercial DVD, it spits it out after about 10 seconds. If I insert a burned DVD, it asks me if I'd like to write something to it.

  • Macbook Pro will not read CD. Comes up with the message "The disk you inserted was not readable by computer"

    Macbook Pro will not read CD. Comes up with the message "The disk you inserted was not readable by computer"
    Is it a hardware problem or a software problem?
    Any help solving this would be appreciated

    Hello M1ckyD,
    The article linked below details a number of troubleshooting steps that can help resolve issues with your Mac's Optical Drive.
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801
    Cheers,
    Allen

  • HT204384 I have a SanDisk Memory Stick PRO Duo and my MacBook Pro will not read it.

    I have a San Disk Memory Stick PRO Duo 4GB and my MacBook Pro will not read it. I have also connected the card into a card reader and connected it to the USB port and nothing happens. This is really frustrating. Why wont my computer read my card?

    Are both , the printer and the mac in the same network?
    You can find the right software and instructions here:
    http://welcome.solutions.brother.com/BSC/public/eu/eu_ot/en/model_top/colormfc/m fcj870dw_us_eu_as.html?reg=eu&c=eu_ot&lang=en&prod=mfcj870dw_us_eu_as

  • My macbook pro will only let me log into guest user?!?!

    So I go to put my admin and password in but all i have access to is 'guest user' I'm in agony!

    dana2208 wrote:
    My MacBook Pro will not let me log on. How do I fix this? Can apple reset it?
    Yes.
    Password doesn't work?
    If so, try resetting it. If the computer is having any other problem, take it  to the Apple store to have it checked out.
    Reset Password starting from Recovery HD
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.
    Best.

  • Since I upgraded to the maverick system. My macbook pro will not read my USB pen. How do I sort this problem out

    Please can someone help!
    SInce I upgraded to the maverick system, my macbook pro will not register my USB anymore.
    Regards
    SP

    Hi,
    Are you sure you don't have unpluged it, without ejected it before?

  • My macbook pro will only boot in safe mode

    Hey,
    I have a macbook pro 15-inch, Early 2011 running osx 10.9.4. I have a SSD hard drive that i installed myself a year ago and hasn't shown any defects. Its a 120 gb OCZ-AGILITY3.
    My problem:
    My macbook will only boot in safe mode nowadays. I have done a complete erasion of my hard drive and installed osx mavericks twice already. After the installation the computer will safely go to the desktop. But if i then do a reboot it won't get further than after the first apple logo, sometime the turning wheel will pop up, before turning off and trying again. i have tried resetting PRAM, I have tried resetting SMC, i have tried avoiding SMC (with big fan rate), but all with no success.
    I have done a complete hardware test (the longer one) and it showed "no troubles found".
    My guess is that the problem is with the battery. My computer won't run anymore without the adapter, when i pull the adapter out it either stays on for a while before just turning off. Without having it plugged in it won't start. Is it possible that during normal start up there is some kind of communication with the battery that can cause this?
    I ran a diagnostic shown in this thread (Will only boot in safe mode) and included it in this post.
    Hope someone can help me out.
    Thanks,
    Bram
    Start time: 17:07:42 08/25/14
    Model Identifier: MacBookPro8,2
    System Version: OS X 10.9.4 (13E28)
    Kernel Version: Darwin 13.3.0
    Boot Mode: Safe
    Time since boot: 10 minutes
    Battery
      Condition: Replace Now
    Diagnostic reports
      2014-08-25 UserEventAgent crash
    Log
      Aug 26 00:41:52 Previous Shutdown Cause: -128
      Aug 25 16:23:38 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
      Aug 25 16:24:05 process rpcsvchost[94] thread 917 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 100.014147 seconds, (82.533432 user, 17.480715 system) ledger info: balance: 90006319931 credit: 100003230498 debit: 9996910567 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90079246240
      Aug 25 16:25:50 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
      Aug 25 16:58:05 jnl: b(1, 3): replay_journal: from: 9340928 to: 9773056 (joffset 0x37a000)
      Aug 25 16:58:05 jnl: b(1, 3): examining extra transactions starting @ 9773056 / 0x952000
      Aug 25 16:58:05 jnl: b(1, 3): txn starting at 9773056 (9773056) @ index  80 bnum 2696544 (8192) with disk cksum != blhdr cksum (0x93b69228 0xc647562)
      Aug 25 16:58:05 jnl: 0x662b0000 0x451b0000 0x2a0001ff 0x40000000  0xd7330300 0x46001d00 0x6c006f00 0x65006400
      Aug 25 16:58:05 jnl: b(1, 3): restarting journal replay (9340928 - 9773056)!
      Aug 25 16:58:05 jnl: b(1, 3): replay_journal: from: 9340928 to: 9773056 (joffset 0x37a000)
      Aug 25 16:58:05 jnl: b(1, 3): journal replay done.
      Aug 25 16:58:06 Previous Shutdown Cause: -128
      Aug 25 16:59:26 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
      Aug 25 16:59:59 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
    Activity
      CPU: user 17%, system 4%
    CPU per process: WindowServer (UID 0) is using 30.5  %
    launchd
      /System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist
      - com.apple.AirPortBaseStationAgent
    Contents of /System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist (XML  document text)
      <?xml version="1.0" encoding="UTF-8"?>
      <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
      <dict>
      <key>Label</key>
      <string>com.apple.AirPortBaseStationAgent</string>
      <key>EnableTransactions</key>
      <true/>
      <key>LowPriorityIO</key>
      <true/>
      <key>LimitLoadToSessionType</key>
      <string>Aqua</string>
      <key>POSIXSpawnType</key>
      <string>Background</string>
      <key>LaunchEvents</key>
      <dict>
      <key>com.apple.distnoted.matching</key>
      <dict>
      <key>com.apple.airport.agent.prefschanged</key>
      <dict>
      <key>Name</key>
      <string>com.apple.airport.agent</string>
      </dict>
      </dict>
      <key>com.apple.bonjour.events</key>
      ...and 21 more line(s)
    Spotlight: Indexing and searching disabled
    Font issues: 11
    Wi-Fi
      link auth: wpa-psk
    Restricted files: 1
    Elapsed time (s): 278

    Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

  • My macbook pro will only start-up in grey screen

    hi, i have a potentially big problem
    I have just purchased macbook pro 15 inch 2.0 GHZ and tried to transfer data using the migration assistant.
    i started have numerous problems like i did not have permissions to open folders - i found out how to solve that from this forum and it worked
    i had more problems though with Teamviewer - it would not open - came up with an error message 600, so i downloaded the newest version which also wouldn't open.
    and basically it just got from bad to worse.....
    so i thought that i would then try to do a restore from 'My Passport for Mac' external hard drive.
    then i got numerous messages popping up saying 'system extensions cannot be used' etc
    i tried numerous times to restart new laptop, shutdown or even hard re-boot and it would not
    so i went into SYSTEM / LIBRARY / EXTENSION and started deleting the files that it said were not installed properly
    the list went on and on and on so i deleted the whole contents of extension folder - it was only then that the laptop would restart
    BUT - now that it has restarted i get the restart 'sound' a grey screen with the apple icon in the middle - no cursor and some small writing in the top left hand corner (looks like CMD mode) and amongst the jargon it does say 'unable to find driver for this platform'
    what on earth have i done ?
    please help
    thanks
    Serena

    i found the answer to my question on this forum - see below,  hallelujah.....
    This solved my question by Franco16 on Jun 13, 2012 3:13 AM
    I found the solution, thanks to MrE_the_Great (read following cut and paste)
    I'm glad it worked out.  I'll put the steps below again for others who join this discussion late and to clarify as I was typing on a phone last night while my MBP was re-installing.
    1) Hold in command-r while rebooting (or from cold start) to boot to the recovery partition.
    2) Chose re-install mac osx
    3) Enter appleID credentials
    4) After the re-install is complete (may take a while depending on your intenet connection etc) all your files, preferences, and software will be there, you shouldn't lose anything.
    5) DO NOT reattempt the Thunderbolt update.  You can update the iPhoto and other updates that Software Update finds...just DO NOT check the Thunderbolt one or you will be at step one again.
    for more information go here https://discussions.apple.com/thread/4020399?start=60&tstart=0

  • Hi how do i get video to show on macbook pro i only have audio playing

    how do
    get video to show i only have audio playing on macbook pro

    You are going to have to give us a lot more information than that.  We need to know what MacBook Pro you have.  What version of OSX (these things should be in your profile).  What are you trying to do.  What program.  What kind of video.  We are completely incapable of guessing what's going on, so if you want an answer, you need to give us information.

  • My macbook pro will only occasionally create a WiFi hotspot

    I have created a WiFi hotspot on my Macbook Pro. Sometimes it will work perfectly but other times it refuses to create one even if I turn internet sharing on. Any ideas why this is the case?

    Some liquid has just spilled into your Mac. What should you do?
    Do
    Immediately shut down the computer and unplug the power cord.
    Remove the computer's battery if it's a portable Mac.
    Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
    Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
    Note what was spilled on your Mac.
    Bring the computer into an Apple store or AASP as soon as possible.
    Don't
    Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
    Don't shake the computer (this will only spread the liquid around).
    Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).

Maybe you are looking for

  • Valuated purchase order??

    Hi MM experts, Please help me understand better about cost flow from purchase order. 1) Where in the purchase order document entered via SRM that identify if the purchase order is valuated or non valuated?? 2) In 3 way match scenario, when good is re

  • Small Problem in JTable,Please help me..

    hi ,i am doing college project & hv some problem Problem : (code is given below ) as i run program ,i am not able to edit cells of table one by one.when i write value in any cell & then if i edit other cell, then previous cell's value become come to

  • How to effect changes made in a jTable into a text file

    i have created a jTable in netbeans6. The table model is DefaultTableModel. i'm not understanding the concept of firecellupdate and other events listeners. i want the changes i make to the table during runtime to be written into a Text file. any help

  • How to make references to other objects

    Hello, I have a project that I need to do and I am not sure how to start it. I need to have a class that has references to four other objects. I have the class, but am unsure how to do the references. would i use extends? like the class name extends

  • Iphone update download error

    I have been trying to update my iPhone 3G now for the umtieth time. It sometimes downloads up to 210 MB but the download never completes and instead iTunes reports: stopped (err = -3253). It also reports in a separate window: There was a problem dowl