Macbook pro will only start to windows I do not have bootcamp files.
I am new to mac but good with windows. I just bought my first mac a macbook pro 17. I do need to run windows on it too. I ran all the updates for the OS then started bootcamp. It did tell me to put in a DVD and i foolishly didnot it said it was copying the files to fbnr. I went to the next step and installed windows 7 64bit. I starts up in windows fine but i now need the drivers that would have been on the DVD. I have read that i should boot up as a mac and start bootcamp and make the DVD. I can not get the OS to start it just keeps going to the windows. How do I start up the OS? Is there a way to download the drives I need with out booting to OS?
Thank you
I looked at the directions for bootcamp and on page 10 it tells you to use to use the control key when starting to choose the drive you want.
Similar Messages
-
My macbook pro will only start-up in grey screen
hi, i have a potentially big problem
I have just purchased macbook pro 15 inch 2.0 GHZ and tried to transfer data using the migration assistant.
i started have numerous problems like i did not have permissions to open folders - i found out how to solve that from this forum and it worked
i had more problems though with Teamviewer - it would not open - came up with an error message 600, so i downloaded the newest version which also wouldn't open.
and basically it just got from bad to worse.....
so i thought that i would then try to do a restore from 'My Passport for Mac' external hard drive.
then i got numerous messages popping up saying 'system extensions cannot be used' etc
i tried numerous times to restart new laptop, shutdown or even hard re-boot and it would not
so i went into SYSTEM / LIBRARY / EXTENSION and started deleting the files that it said were not installed properly
the list went on and on and on so i deleted the whole contents of extension folder - it was only then that the laptop would restart
BUT - now that it has restarted i get the restart 'sound' a grey screen with the apple icon in the middle - no cursor and some small writing in the top left hand corner (looks like CMD mode) and amongst the jargon it does say 'unable to find driver for this platform'
what on earth have i done ?
please help
thanks
Serenai found the answer to my question on this forum - see below, hallelujah.....
This solved my question by Franco16 on Jun 13, 2012 3:13 AM
I found the solution, thanks to MrE_the_Great (read following cut and paste)
I'm glad it worked out. I'll put the steps below again for others who join this discussion late and to clarify as I was typing on a phone last night while my MBP was re-installing.
1) Hold in command-r while rebooting (or from cold start) to boot to the recovery partition.
2) Chose re-install mac osx
3) Enter appleID credentials
4) After the re-install is complete (may take a while depending on your intenet connection etc) all your files, preferences, and software will be there, you shouldn't lose anything.
5) DO NOT reattempt the Thunderbolt update. You can update the iPhoto and other updates that Software Update finds...just DO NOT check the Thunderbolt one or you will be at step one again.
for more information go here https://discussions.apple.com/thread/4020399?start=60&tstart=0 -
Macbook Pro will only start in safe mode 'Lion' all I get is the wheel
My Mackbook pro 13 hangs at sign in, I get the wheel for over 6 hours
I can start in safe mode only
I have removed the HD placed in a USB Cradle and it appears to work fine I can view all pics, music, on another Mac
I've formatted another HD placed in the macbook pro, inserted the CD for snow lepod install held down 'C' on startup, but I get a message saying that the software can't be installed on this HD or words to that effect.
On new the Macbook pro had Snow Leopard, and was upgraded to Lion unsure what version I'm at but I know it's not the latest version
Any advice in plain english please ( Step by Step)LowLuster ,many thanks I can flash it up using my USB cradle, all I need now to do is find the MPN of the HD Harness cable and procure one. solved in 10 minutes
-
Macbook Pro will only allow AirPlay to play through iTunes, therefore I can't play songs through Safari. I have tried going on to the Sound settings and selecting AirPort Express but its just jumps back to internal speakers. Its WELL ANNOYING! Any ideas?
Macbook Pro will only allow AirPlay to play through iTunes
This is normal.
To be able to play any audio source on your MacBook Pro, you might want to take a look at an application like Airfoil. More info below:
Rogue Amoeba | Airfoil for Mac: Wireless Audio Around ... -
I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?
Yes. Find the LR catalog file by looking in Edit/Catalog Settings/General. Close LR and navigate to that spot. The catalog file is the one that ends in .lrcat - move it to wherever you want. Next to the .lrcat file is a subfolder called Previews.lrdata. You can move that over as well, but if you don't LR will generate new previews. Double-click on the .lrcat file in its new home and LR will open with that catalog. Set Preferences to When Starting Up Use Most Recent Catalog.
-
How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.
It has always been very basic to always maintain a backup copy of your computer.
Did you fail to back up your pics?
The photo sync is one way - comptuer to ipod.
You can e-mail them to yourself (instructions in the manual), but they will not be of the original quality. -
When trying to sync my iPhone/iPad with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges?
Hello magestecal,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Take care,
Alex H. -
My macbook pro will only let me log into guest user?!?!
So I go to put my admin and password in but all i have access to is 'guest user' I'm in agony!
dana2208 wrote:
My MacBook Pro will not let me log on. How do I fix this? Can apple reset it?
Yes.
Password doesn't work?
If so, try resetting it. If the computer is having any other problem, take it to the Apple store to have it checked out.
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.
Best. -
iMac was making a strange sound yesterday. I shutdown and restarted now it will only boot in windows vista. I've tried option key that doesn't work, I've tried command R no luck. I've left un-plugged, not sure what to do. I don't even get the white screen like it's trying to load, it goes directly to windows vista, once in windows I can't get anywhere to try and go back. I did download avast the other week, it seemed to be running fine until yesterday. UGH
If you are running OS X "Lion" or later, boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. For Snow Leopard, start your Mac while holding the c key with its original OS X Install DVD inserted in its optical drive.
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
If you manage to boot OS X, uninstall Avast. Its effect on a Mac has progressed from complete and utter worthlessness to maliciousness.
Be sure to use its latest uninstaller, which will remove it completely. -
I have a network set up with a main time capsule and airport express. The airport express is configured to extend network. While its fine for our iphones and ipad to connect to the express, I would like the Macbook pro to only connect to the time capsule as it seems to run faster. Any way to do this?
You are extending the 2.4ghz.. as that is the only way you can connect iphones.
But if you have Gen2 or later TC you can setup 5ghz to use a different wireless name to 2.4ghz.. and it is much faster.. you need to be close to the TC though.. like in the same room.
Make sure you download 5.6 airport utility if you haven't already.. go to the wireless options and the extra wireless area.. set a different wireless name (SSID in everybody but apple's book). Then you can deliberately select it. -
I have owned my MacBook Pro for several months without having any problems with it. Recently I am having trouble with my Yahoo Mail. I can open it fine, but 2 out of 3 times when I try to actually open a message, the spinning ball comes on the screen and does not stop. Sometimes, I can log out or force quit and come back in to my account and use it. Other times, I run into the same problem. Any suggestions?
Killerfinch wrote:
My new yahoo account nestles comfortably in iCloud on the mine iPad.
No, your Yahoo account is not in iCloud (which only handles iCloud mail), it is in Yahoo, and the Yahoo mail account is on your iPad.
But the MacBook Pro will have none of it! I write this question now as I fear that I will be totally demented very soon and unable to formulate my thoughts clearly!
Get the correct settings for your account from Yahoo and set it up manually.
By the way, I also find the "password" issue problematical. It seems Apple want my Apple password rather than my eMail password. All very confusing.
That would depend on what you are trying to do. -
Hi all,
My MacBook pro was running fine then it went very slow, I got the spinning world but it would not do anything. I tried to restart but it had frozen, so I turned off the computer by the power buttton. Now it won't boot up, it justmfreezes with a blue screen in safe mode. I have tried booting isank blue user mod and running /sbin/fsck -fy and a couple of other suggestions from various discussion boards but nothing works. I just tried booting up in windows and it works fine, with access to the mackintosh HD.
Any ideas on how to fix the mac side??
Thanks in advance!Sorry rubbish predictive text.i meant to say I tried booting in single user and running /sbin/fsck -fy
-
My macbook pro will only boot in safe mode
Hey,
I have a macbook pro 15-inch, Early 2011 running osx 10.9.4. I have a SSD hard drive that i installed myself a year ago and hasn't shown any defects. Its a 120 gb OCZ-AGILITY3.
My problem:
My macbook will only boot in safe mode nowadays. I have done a complete erasion of my hard drive and installed osx mavericks twice already. After the installation the computer will safely go to the desktop. But if i then do a reboot it won't get further than after the first apple logo, sometime the turning wheel will pop up, before turning off and trying again. i have tried resetting PRAM, I have tried resetting SMC, i have tried avoiding SMC (with big fan rate), but all with no success.
I have done a complete hardware test (the longer one) and it showed "no troubles found".
My guess is that the problem is with the battery. My computer won't run anymore without the adapter, when i pull the adapter out it either stays on for a while before just turning off. Without having it plugged in it won't start. Is it possible that during normal start up there is some kind of communication with the battery that can cause this?
I ran a diagnostic shown in this thread (Will only boot in safe mode) and included it in this post.
Hope someone can help me out.
Thanks,
Bram
Start time: 17:07:42 08/25/14
Model Identifier: MacBookPro8,2
System Version: OS X 10.9.4 (13E28)
Kernel Version: Darwin 13.3.0
Boot Mode: Safe
Time since boot: 10 minutes
Battery
Condition: Replace Now
Diagnostic reports
2014-08-25 UserEventAgent crash
Log
Aug 26 00:41:52 Previous Shutdown Cause: -128
Aug 25 16:23:38 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
Aug 25 16:24:05 process rpcsvchost[94] thread 917 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 100.014147 seconds, (82.533432 user, 17.480715 system) ledger info: balance: 90006319931 credit: 100003230498 debit: 9996910567 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90079246240
Aug 25 16:25:50 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
Aug 25 16:58:05 jnl: b(1, 3): replay_journal: from: 9340928 to: 9773056 (joffset 0x37a000)
Aug 25 16:58:05 jnl: b(1, 3): examining extra transactions starting @ 9773056 / 0x952000
Aug 25 16:58:05 jnl: b(1, 3): txn starting at 9773056 (9773056) @ index 80 bnum 2696544 (8192) with disk cksum != blhdr cksum (0x93b69228 0xc647562)
Aug 25 16:58:05 jnl: 0x662b0000 0x451b0000 0x2a0001ff 0x40000000 0xd7330300 0x46001d00 0x6c006f00 0x65006400
Aug 25 16:58:05 jnl: b(1, 3): restarting journal replay (9340928 - 9773056)!
Aug 25 16:58:05 jnl: b(1, 3): replay_journal: from: 9340928 to: 9773056 (joffset 0x37a000)
Aug 25 16:58:05 jnl: b(1, 3): journal replay done.
Aug 25 16:58:06 Previous Shutdown Cause: -128
Aug 25 16:59:26 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
Aug 25 16:59:59 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
Activity
CPU: user 17%, system 4%
CPU per process: WindowServer (UID 0) is using 30.5 %
launchd
/System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist
- com.apple.AirPortBaseStationAgent
Contents of /System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist (XML document text)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.AirPortBaseStationAgent</string>
<key>EnableTransactions</key>
<true/>
<key>LowPriorityIO</key>
<true/>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>POSIXSpawnType</key>
<string>Background</string>
<key>LaunchEvents</key>
<dict>
<key>com.apple.distnoted.matching</key>
<dict>
<key>com.apple.airport.agent.prefschanged</key>
<dict>
<key>Name</key>
<string>com.apple.airport.agent</string>
</dict>
</dict>
<key>com.apple.bonjour.events</key>
...and 21 more line(s)
Spotlight: Indexing and searching disabled
Font issues: 11
Wi-Fi
link auth: wpa-psk
Restricted files: 1
Elapsed time (s): 278Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.
-
Macbook Pro will only display basic colours
I set up my macbook pro to run dual monitors with my 20 inch LG display. It worked fine for a bit but then decided to run to only basically colours, probably 256 colours. I then shut it off and tried it again the next day thinking it was a heat issue, and the problem was still there.
I tried to change it in the options menu and it already says it is set to millions of colours. The weird part is that when I boot windows the colour is fine and I have no trouble playing games.
Does anyone know any solutions to this problem, or have they heard of it before?Open the Universal Access pane of System Preferences, click on Seeing, and move the Contrast slider all the way to the left unless it's there already.
(21549) -
My macbook pro will only occasionally create a WiFi hotspot
I have created a WiFi hotspot on my Macbook Pro. Sometimes it will work perfectly but other times it refuses to create one even if I turn internet sharing on. Any ideas why this is the case?
Some liquid has just spilled into your Mac. What should you do?
Do
Immediately shut down the computer and unplug the power cord.
Remove the computer's battery if it's a portable Mac.
Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
Note what was spilled on your Mac.
Bring the computer into an Apple store or AASP as soon as possible.
Don't
Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
Don't shake the computer (this will only spread the liquid around).
Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).
Maybe you are looking for
-
Dear All I have some is my current assignment-Customer is buying some material say "A" want "B,C" as exclusive free goods is it possible to give two free at a time in same order ? I only know one exlusive free good can be give to one material with co
-
Multiple ITunes Accounts Into One Account
Hello. I have two PC computers with different ITunes accounts (Apple IDs), an IPod, IPhone 5, and IPad. To simplify, I would like one ITunes account instead of two. Is this possible to combine without losing anything? How? Thank you.
-
How do I sync Outlook 2011 with two macs and and an iphone
Hi there I have an iMac which I use in my home office, and a Macbook Pro that I take with me everywhere. I am running outlook 2011 on both which has 2 POP accounts linked to it, and an Exchange account also. I was wondering if there was a way to keep
-
How do I roll back to an earlier version? 11.1 is just too buggy -- I don't like the way it displays podcasts, and I can't add files (.mp3's) or folders.
-
"Reveal in Finder" Disappeared
About 2 weeks or so ago my "Reveal in Finder" in my right click menu disappeared, does anyone know how to get it back? I am on a MacBook Pro running 10.6.8 all up to date.