MacBook Pro (Wireless Internet) - ethernet - Windows XP (no wireless) ?
Hello,
I have MacBook Pro with wireless internet that works just dandy.
I also have a cheap IBM ThinkPad running Windows XP. It's from the stone age, so it has no wireless internet card.
Ethernet cable successfully connects the two, and I can transfer files back and forth using smb://, no problem.
But I really want is to be able to get internet on Windows using connection from my MacBook Pro.
Is this possible? Can I do it in system preferences somewhere, or would I have to go buy a router or something?
EDIT: I'm a Web Developer, so I just want to be able to connect to see how HTML files look on IE. If there is a way to setup a localhost and plug IP into Windows XP, that'd be a good enough solution.
RE-EDIT: Just figured it out on my own :S
Thanks,
-Adam
Message was edited by: yopogs
Message was edited by: yopogs
I figured it out
System Preferences -> Sharing -> Internet Sharing -> "Airport" + "Ethernet"
Similar Messages
-
My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC. I hate to spend another $179 if this is just something I'm doing wrong. Please help
I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11. -
Windows laptops can't connect to Macbook Pro shared internet when WEP security is on
As the title states, my Windows laptops can't connect to Macbook Pro shared internet when WEP security is on. My iPhone has no problem asking for the password when I try to access the shared internet my MacBook Pro on Mountain Lion is sending, but my Samsung Slate on Windows 8 sees the network and only succeeds in connecting when no password is required. When security is on, it just tries for a moment and says it can't connect to the network without ever prompting me for the password. The same thing occurs on my Asus Netbook running Windows XP. Since all the reviews about OS X's internet sharing mentions "any wifi device" can access it, I haven't assumed it's only compatible with Apple products. I want my MacBook Pro to save me from needing an external router.
I would post a new question, outline the specific problem you are having and skip all the extra. Outline any steps you have taken already to try and solve the problem. Post the question in the forum most likely to have followers who can answer your question. Give your topic a good title such as: My MacBook Pro cannot connect to my WEP-enabled PC.
Provide any hardware information that may be relevant such as the make and model of your router and method of connection - wired or wireless.
I'm no authority, but have you tried using WPA2/Personal on your PCs? This method is most compatible with Macs.
If the WEP password is a hexadecimal password then on the Mac you need to preceed the number with a $ sign or the hex digits, 0x.
These links may be useful:
AirPort- Joining an encrypted WEP or WPA Wi-Fi network
AirPort Express- Difficulty joining 3rd-party network that is using WEP -
Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resources window then I have to refresh the internet search address line at the top of Safari. Can someone tell me how to stop this. It started after a software upgrade. It didn’t do that before. Thank you.
A few thoughts for diagnosis/testing purposes:
Have you recently run the disk utility and repaired HD and permissions? If not do so.
Boot into the Safe mode - hold down shift key on boot - and see if the problems are still there. Some functions won't work but see if anything odd happens.
Check your startup items. Get rid of them temporarily.
Create a new user account and see if the problems occur with the new account.
Lastly, be sure your backup is up-to-date. -
Can't connect macbook pro to internet with airport extreme
Can't connect macbook pro to internet with airport extreme
If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
Tell me how the Airport is setup.. what broadband modem and router you have.
What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
Upgrade to Yosemite?? -
Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?
Hi
Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?I know this doesn't help you much, but, I think you have to see if your Mac pro does audio out via HDMI. I don't even know if mine does via DVI. I think it may have to do with the adapter. Try going into Audio MIDI and setting the digital out to multichannel
and using the toslink cable for now. Lemme see...apparently DVI does not carry audio at all. Hm. apparently monoprice could be helpful? If I understand what you're saying correctly: you want to take DVI and multichannel audio via the Toslink and have it all go out over HDMI, right? Whooo..... amazon...looks like it's about $100http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ
just a shot in the dark
I'm probably wrong....or not
John B -
How to connect a MacBook Pro to internet with no cable, no Wifi, no ADSL?
I'll need to connect my MacBook Pro to internet in an environment without any of the above mentioned means.
1. What are the possibilities? GSM (mobile phone), a modem (express card?)?
2. Where can I find the information on how to proceed?
Thanks!
Éric
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)Hello,
You can use a mobile phone as a modem. This can be done manually by yourself or automatic by a commercial third party software:
Manual: you need the right scripts and connection settings and enter them manually in your network configurations. You find the right scripts and configuration hints here: http://www.taniwha.org.uk
Automatic: try the demo of launch2net at http://www.launch2net.com which features a powerful configuration assistant which already includes all necessary network settings and scripts.
The other option would be to use the XU 870 ExpressCard modem from Novatel at http://www.novatelwireless.com. If you are living in the USA and use Cingular, Apple has released a so called WWAN update with all settings. So you can use this ExpressCard in Cingular networks immediatly.
Thank you
Jan Fuellemann | nova media -
How do I set up airport on my macbook pro (wired with ethernet to a cable modem) and the wifi settings on my ipad2 to enable the use of wifi on my ipad?
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8156.html
-
How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?
Sorry - confusing - My question has NOT been solved yet - can anyone help?
-
On my MacBook Pro, while using the windows side, I have no audio. Any suggestions
On my MacBook Pro while using the Windows hard drive, I have no audio. The icon shows that I should (no mute insignia). Any thoughts what I might do to correct?
Thnaks.
TomWhoa, I found the answer by clicking on one of the questions in the "More Like This" box to the right. I do wonder how to find that box before posting my dumb question. The answer turned out to be checking the youtube volume control. I turned that up and it solved the problem for Comast as well.
-
Macbook Pro Will Not Boot Windows Disk
I have a late 08 (or early 09) Unibody Macbook Pro 2.53Ghz. I start the Bootcamp Assistant and successfully create my Windows partition. When I restart with the Windows 7 disk, I get a blinking cursor for 1 second then it goes to a black screen and never leaves. I have tried several different Windows 7 disks with the same result. I have even tried booting from a Windows Vista, Windows XP and even a Ubuntu disk all with the same result, stuck at a black screen.
I took the hard drive out of this mac and put it into my wife's older Macbook pro, and it booted off the Windows 7 disk and completed the install to the drive with no issues. I then put the hard drive back into my Macbook Pro and get the same black screen when trying to start the Windows partition, and still have the same problem that it will not boot from any other OS disk be it Windows or Ubuntu. It boots from OS X DVDs without a problem.
Also several months ago I had a Windows XP installation on this computer with no issues. I wiped it just before going to Snow Leopard.
Any clue as to what is going on here?What is really odd is if I take my hard drive out of my Unibody Macbook Pro and put it into my wife's non-unibody Macbook Pro, it boots the Windows partition with no problem (Remembering I previously swapped these hard drives to complete the Windows installation to my hard drive). Seeing as the disk boots on her machine fine and not in mine, and my Windows cds (DVDs) boot fine on hers and not on mine, it seems to me it's something specific about my machine, but I can't imagine what it is.
-
I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.
OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck -
At the moment i'm using my macbook pro with an ethernet cable = where i'm now i don't have wi-fi -> now i'm trying to do a wi-fi hotspot for my iphone through my macbook pro, but it's doesn't work - please help me!
Theres almost a trick to it for first time users, goto SETTINGS...General......Cellular (if Verizon) ....Personal Hotspot, turn it on.....turn on wifi on your Mac, select your Iphone. Enter password.
If you take too long doing it, youll need turn turn off and on real quick the "personal hotspot" slider on the Phone.......then go quick again thur the Mac. -
how do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire. I do own an ethernet cable though
A FW cable would be far faster & Easier, but with Ethernet you need a compatible version of Migration Assistant running on both Macs.
-
I lost my password and cannot log on to my MacBook Pro. MacOS X window opens upon startup, with my log on name, requesting password, but I cannot remember it. Is there a way to bypass this window and reset my password? Cannot get to System Preferences or Apple Menu
Thanks!Yes.
https://discussions.apple.com/thread/4913069
Maybe you are looking for
-
How can I get responses to return to a specific email address?
How do I get all my for responses to return to a specific email address? Does the Acrobat user need to be logged in with this email or is there an option for this? Any help would be appreciated!
-
Here's the thing: I often have multiple events/appointments on any given day, and what I find frustrating is that I can't see all of them in Month view (which I use most of the time). When iCal decides there is too much info on a certain day, it puts
-
Problem opening PDF from Google search
Hi , I;m a newb to the BB Torch 9810 and was wondering why , when I click on a link (Google search) , ffor a specific PDF file , my BB wants to save the file , rather than open it . How do I correct this problem , so the file will open and I won't b
-
We've setup the distribution model to post confirmations to/from SRM and R/3. The two msg types are ACC_GOODS_MOVEMENT and MBGMCR. In the classic scenariom what causes the PO from R/3 to show up on the Central Receiver (BBPCF03) screen? Thanks, Nan
-
Mtrr: type mismatch for d8000000 / Grub boot command line
Hi, Dmesg is showing: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining (DL380 G5 - generic KVM/LCD Monitor) I googled for the problem found Disable MTRR for vesafb. iirc, there's a boot command line option to do it.video=