MacBook Pro with 1 SIMM
Can you run with just one simm installed? I ordered 2 4GB modules for my 17" 3.06 MHz. One or both of the simms had problems. I had screen flashes (streaks of light across the screen) and panic crashes along with app crashes. I took out 1 to trouble shoot the problem. I would still have occasional panic crashes and app crashes, but not near as often as with both modules. Usually I would go between 13,000 seconds to 20,000 between panic crashes. I eventually change both modules, but only have one installed, waiting on the other one. Will just one simm installed cause crashes?
Brain ****...yes it uses DIMMs. Still have the problem had a panic crash this morning. Here is the header information for the crash. Is there anyone out there that can look at this and tell me if it is a ram caused crash?
Interval Since Last Panic Report: 5598 sec
Panics Since Last Report: 2
Anonymous UUID: CBD8042D-E9E0-4620-BC20-66DF3D4087C2
Thu Nov 12 09:32:23 2009
panic(cpu 1 caller 0x2a7ac2): Kernel trap at 0x0000170f, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x0000003e, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x08451900, EDX: 0x00000000
CR2: 0x0000003e, EBP: 0x0000028e, ESI: 0x00000000, EDI: 0x00000000
EFL: 0x00010206, EIP: 0x0000170f, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000002
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x84562e8 : 0x21b2bd (0x5cf868 0x845631c 0x223719 0x0)
0x8456338 : 0x2a7ac2 (0x591c30 0x170f 0xe 0x591dfa)
0x8456418 : 0x29d968 (0x8456430 0x72756f53 0x28e 0x170f)
0x8456428 : 0x170f (0xe 0x74650048 0x68740010 0x43490010)
Unaligned frame
Backtrace terminated-invalid frame pointer 0x28e
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Similar Messages
-
How to connect an older MacBook Pro with mini VGA port to HDMI?
I have an older MacBook Pro with a female mini VGA port. I would like to watch movies which have been downloaded to my laptop on my flat screen TV. Newer MacBook Pros have a mini DisplayPort for which Belkin makes a cable to use; however, I have not been successful in finding either an adapter or converter to use with my older laptop.
FYI. Am currently using Leopard but am upgrading to Snow Leopard.I believe you naeed the Apple ADC to DVI adapter.
-
I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....
Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds. -
HP 1312nfi Multi-funtion printer & brand new Macbook Pro with Snow Leopard
Hi,
I just got my Macbook Pro with Snow Leopard May 2010. I can only print and fax with my 1 year old HP 1312nfi color laserjet multi-function printer. I cannot SCAN at all. I tried loading the software that came with the printer but it wouldn't install the 'Print Director' as I had on my old iMac (with Leopard). Then I went to HP and it said not to install the software that came with the HP printer because Snow Leopard has it all. I read that there are 3 ways to scan from my computer which none of them work. I brought up the printer then clicked printer setup and when I try to bring up the 'print utility' from the last tab, it won't open anything. Where is the printer utility now? Why can't I scan? There has to be a way. HELP please?Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3 -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.
My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there. -
HOW DO I FIND THE EJECT BUTTON ON MACBOOK PRO WITH RETINA
i have a macbook pro with retina display , and i want to know how i eject the disc from the apple external optical drive i can't see the eject button on the keyboard layout.
Ralph Landry1 wrote:
Works for me every time without failure.
It's not a matter of failure, it's the idea of training people to associate the Trash with unmounting a volume. The Trash is a mechanism for the permanent deletion of your data, and designed to appear as such. Apple haters used to laugh at this..."Eject by dragging to the Trash? And you say the Mac is intuitive? Ha ha ha..." And they were right. It's better to teach ways that actually make more sense.
The great thing about all the newer ways is that they are easily discoverable, you don't have to remember or figure out that you have to virtually trash your disk. A new user would naturally expect to find an Eject command or button, and there they are in plain sight.
SwankPeRFection wrote:
I always find a ton of mounted installers left behind by users who install stuff on their systems. I don't understand why Apple cannot make an automated process to unmount the installer once it's done. Just seems stupid to me I guess. I've seen that mounted installer confuse people into clicking on it each and every time they want to start the app because they don't understand that once it's installed, that installer should be ejected because they're done with it.
I agree about the installer volume behavior...and Apple made it worse in Mountain Lion by putting the volumes on the bottom of the Finder sidebar, which is often out of view. Incidentally, drag-to-trash does not seem to work with volumes in the sidebar, but the other Eject methods do.
The "installer problem" is another reason I love the other methods much more than dragging to the trash. To eject multiple volumes by selecting them and pressing Command-E is much faster than the time taken to gather them up with the mouse and drag all of them to a specific spatial target. -
I am about to buy a 13" MacBook Pro with 256 GB SSD. I want a Windows partition set up. What size should it be, and can I load Win XP Pro or does it need to be Win 7 or 8?
You can use XP but it has to be in a Virtual Machine and OS X as the host instead of as a dual boot system with XP in its own partition. That is how I run Windows on my Mac, in a Virtual Machine.
Take a look at VritualBox from Oracle. It's free and works very well. -
Should I get a 13" or 15" Macbook Pro with retina laptop?
I, FINALLY, after one year of wanting to get a new laptop to use as my primary computer replacing my desktop computer at home.........have decided to switch gears from a Windows computer to a MACBOOK PRO with RETINA laptop. It's not an easy decision when you are spending SO much money on something you hope will last a long time as I do NOT plan on getting a new laptop once I buy this one for a very long time (until it breaks / can no longer function)!
My dilemma now is whether to go with the high end 13" Macbook Pro OR get a similar if not higher end 15" Macbook Pro. Here's background on myself and what I plan on using the laptop for:
I plan on using it as my new primary computer for home so primarily for my personal use, but I will be using it also for work so I will be using it for basically EVERYTHING!
I will use it to do word processing (MS Word), to do my finances (reconcile my bank stmts/accounts), using MS Excel for accounting work, check my emails, research the Internet, photo editing (pretty much basic, definitely not advanced) and creating slideshows with my photos/music, downloading/playing music. I do not plan on using it to play any games.
I use alot of MS Office / Excel and some Powerpoint - either for work or home.
I need alot of storage space for photos (recreational - up to 400 per vacation trip) and I plan on creating slideshows with the photos using Apple's great photo/video/slideshow apps! At last count, I had about 100GB of photo files.
I also need alot of storage for my music files - I have @ least 12GB of music right now and am always downloading more each year.
I plan on taking it with me outside of home only on the weekends for the most part like to a cafe (Starbucks) or library, but not for anything further than that (not for travel as I will just take my ipad).
I know it's only ~1lb difference in weight, but a couple of my concerns is since it will be my primary home computer (i.e.I'll be using it in the evenings/on the weekends and probably more (since it's an Apple!) to work on photos/slideshows, if the screen size difference will matter in the longrun in terms of having any impact on my vision (not sure if the 2" will make a difference in that). I'm only 45yo, but I do worry about that! I tried both the 13" and 15" in the Apple store and the only difference I saw was that the 15" screen allowed you to have multiple programs visible on the screen side by side, but viewing the actual programs was the same (in size). I don't really view programs side by side right now (I use the ALT-TAB shortcut alot to view multiple programs I have open at once), but I could see how having programs viewable side by side could come in handy.
I had a Toshiba 17" laptop before that was too HEAVY to lug around even if on the weekend so I no longer want a heavy laptop and want something more portable to take with me on my weekend excursions to the local cafe/library which basically means going from home to car and car to location at most, but when I go to use the restroom, I like to take it with me (do not feel safe leaving it behind on table) so I don't want it too heavy.
I do plan on getting me a Western Digital external hard drive to backup ALL my files yet since I plan on keeping the computer for as long as it'll hold up, I want to make sure I have alot of storage to keep up with me. I like the flashdrive component because there are fewer moving parts so less likely to have problems in the long run and given that (despite my need for alot of storage), I'll backup my photos/music to external drives should I end up maxing out on my storage.
I value your opinions, please help me DECIDE!!!!! I'm frustrated and it's driving me nuts!!! I know it's too much to ask, but if they had a 14", I would probably go with it! A 2" difference seems pretty big. :-)
THANK YOU!!!Thanks guys. I'm set on the 15" now and am now deciding on whether I should go with the standard MBP or the MBP with retina display? I'm not an advanced photographer, but I do like to take alot of photos especially when travelling and I do plan on creating slideshows with my photos synched with music. I don't think I'd be one to really be able to tell the difference between a retina vs. non-retina screen given that since I can't really tell the difference between a tv screen with vs. without HD. So for me, I don't think it'd be about the retina display at all. It is more about the storage capacity AND the fact that I hear with the retina/flash storage, that there are less apt to have problems down the road so a more sturdy a machine. Given I take alot of photos/will be creating slideshows wth my photos, and downloading/playing music, I'm thinking the standard MBP might be better storage-wise. But also given I plan on keeping this laptop for a long time (basically, until it breaks or becomes too slow to function productively), that makes me want to go the retina/flash storage route. SIGH.
Should I not be so concerned about the longevity of the machine, but rather opt for the one with more storage? -
What kind of longevity can I expect from the SSD in a new MacBook Pro with Retina Display?
Hi all,
I recently ordered a new MacBook Pro with the Retina Display. This will be both my first computer and my first Mac that uses a SSD as the primary storage device. As the title of this post suggests, what I would like to know is what sort of lifespan/longevity can I expect to get out of it? My current MacBook Pro was manufactured in 2007 and has a stock 160GB Fujitsu hard drive that has been fantastic for me over the past 4-5 years. It continues to run like a champ, and I would hope that a brand new SSD would be able to last at least that long. Given that the new retina MBPs cannot be upgraded or (easily) user-serviced, I am somewhat curious to know whether or not Apple's new proprietary SSD modules will give out/slow to a crawl before/after my new machine becomes completely obsolete. I have been searching for articles published within the past few months on whether or not the current crop of SSDs on the market are more reliable than those introduced a year or two ago, but alas, I haven't had much luck. Perhaps it is still too early to tell?
I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.ARealMac(PPC)User wrote:
...I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.
While I think your concern is legitimate (it was mine too), I think to some extent, how long they last will be up to you. The individual cells in the flash media in an SSD have limited life spans, and SSD controllers have a variety of techniques to spread that wear around evenly (wear leveling). That wear is exacerbated by the controller having to erase a whole block of data when even just one page needs to be changed, and if not all the data in the block is still valid, more data than necessary gets moved (write amplification). To provide some extra room for all this reshuffling of data, SSD manufacturers build in extra space that's inaccessible to the user (over-provisioning), but it typically runs about 7%. (This is a good discussion of the inner workings of all this)
If you stuff your SSD full of files, so that there's very little room to do all this rearranging, I think you'll experience the slowdown you're concerned about. TRIM, which Apple's SSD's support, will help, but you can too. Allow plenty of free space on your SSD and perhaps partition it so that there is free space outside the partition (check this out to see what a difference it can make). You can't use it but the controller can as an extension of the built-in over-provisioning.
You also mention that you "will most likely use it to record several tracks and store my growing library of songs and videos." Why not instead use an external SSD connected via USB 3.0 for storage? They're relatively cheap, very fast, and keep the space on your internal working drive free. A BootCamp partition would also take up space, so you might consider using Windows in a Virtual Machine instead. VMware Fusion or Parallels would be installed on the internal SSD but the virtual machine files could go on the external.
In any case, your data is more important than your SSD, so back up, back up, back up. -
Hello,
I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
I tried to install the software via the HP website. It's not working.
Can someone help me with this one ?
Thanks,HP Print Drivers
-
How do I get the most out of my Macbook pro with retina display?
Hi,
I am new to apple had an Iphone and loved it and was drawn in by the advertisment for the new macbook pro with retina display and decided to get myself one. I have pretty much taught myself everything so far and I think I have a basic enough knowledge now of working my way round my mac and was wondering if anyone has any suggestions on how I can look to develop as I feel I have got all the gear but no idea!\
Any suggestions are greatly appreciated,
Cheershttp://www.apple.com/support/mac101/
-
How can I disable the internal display on my MacBook Pro with connected external display?
I used this metod with the MagSafe power cable connected (see http://osxdaily.com/2012/06/15/yet-another-way-to-turn-off-internal-lcd-display- of-macbook-pro-with-lid-open/).
Open System Preferences and click “Mission Control”, then click on “Hot Corners”
Select a hot corner and pull down the menu to select “Put Display to Sleep”
Now connect the external display to the Mac and move the cursor to the newly created sleep corner to turn off the internal display
Close the MacBook lid and wait a few seconds before opening the lid again, the internal display should stay off while the external display will be powered on
This worked great under Mac OS X 10.7.4, but after the last update to 10.7.5 it doesn’t work more. The built-in display turns off really, but a few seconds after opening the lid it lights up again. Do you have any suggestions? Dimming the brightness or clamshell mode is not very useful.
MacBook Pro 13-inch,
2,7 GHz Intel Core i7,
Mac OS X Lion 10.7.5 (11G56)
Thanks!I have the same problem: not able to work with my external display mirroring the internal one - while shutting the internal display off.
I believe there is an issue with Mac OS X Lion 7.5 that Apple needs to solve, since apparently it does not happen with this version of the OS only...
https://discussions.apple.com/thread/4315808?start=45&tstart=0
Or any other way to solve it?
Mac Book Air, 13-inch Mid 2011
Mac OS X Lion 10.7.5 11G63
Thank you! -
How do I connect an external microphone to a Macbook Pro with Retina display ?
How do I connect an external microphone to a Macbook Pro with Retina display ?
Alternatively how do I connect an audio input at a level that would normally have gone into a 'line input' socket ?Plug it into the linein/headphone jack if there's just one. It'll switch between the two modes automatically depending on what you plug into it.
-
13" Macbook Pro with retina or MacBook Air?
Hello All,
This is my first post to this forum and I need an advice for buying my first MacBook ever. The time has come that I have decided to invest into a Mac and have always been a PC user until now. I was planning to buy the 13" 256GB version (1500 USD). My goal is to learn coding (JavaScript, PHP/MySQL, and HTML, Drupal for Web design) on the bust commute, with little to none intention of doing gaming on the machine. But plan to watch video/tutorial files, movies etc.
But I am reading some concerning reviews/complaints of people about the MacBook Pro with Retina series and I want to know whether the latest version (as of today, Feb 21st, 2014) of rMBP is problematic. Here is what I have learned about the existing issues so far and I would like if folks here could give me a piece of advice which one should I choose (Air vs Pro)?:
1) The trackpad/system sudden freeze;
2) The image retention/persistence problem;
2) Overheating when watching a video;
Honestly, I feel disappointed that Apple computers are having so many issues.
Are these issues still a problematic as of today for rMBP? Will the heating be problematic fo watching a movie for 1-2 hrs? Is it better to go with the air rather?
Please advise!
Thanks.
FrankAlso, would the applecare be strongly recommended for my situation?
Maybe you are looking for
-
Help with Apple IDs and iTunes please
One family member has an iPad2 with one Apple ID that is authorized in iTunes on a Win7 laptop. That laptop has one Windows user account. Some apps, books, etc were purchased with that iPad2. We recently got a hold of an old iPhone to use as an iPo
-
Hi, I had my iphone stolen a few weeks ago which had quite a lot of music on that I had downloaded from itunes via my phone but had not synced with itunes on my computer. Is there any way to access the music now or is it lost? Thanks x
-
Help I need any help i can get, im having trouble with the app find my iphone. I have lost my iphone, checked on the computer, and somehow, took it away so how do i get it back??
-
Select Statement to fetch Multiple records of a same field
Hi one and all, I have ascenario like this, I need to fetch the material starting with 'MA%' and material Starting with 'RT%' and so on.....data from the table resb with reference to AFPO-AUFNR. Now how can write select Query. Iknow how to
-
I have a problem whit version of db
well, i'm iusing form9i and dont save the changes in db oracle9 but i can save the change it in db oracle8 helppppppp me tanks