MacBook Pro with built-in HD Camera

Im a PC guy just moving to Mac.  MacBook Pro 13 w/built-in HD Cam will not recognize camera's existence.  How do I "activate"?

For starters... if you launch PhotoBooth or FaceTime, does the camera work?  If you're trying to use it on a website, many sites access the camera via Flash.  You would need to download and install Flash from Adobe:
http://www.adobe.com/shockwave/download/alternates/
(select the OS X installer)
If your camera is not working with PhotoBooth or FaceTime, let us know.

Similar Messages

  • Ventrilo on MacBook Pro with Built-In Mic

    I recently installed Ventrilo 3.0.1 client and cannot get it to recognize my MacBook Pro's built-in mic. The software is working otherwise, as it connects to the server and I can hear others.
    The MacBook Pro Sound control panel is set to built-in mic and the sound check is OK. In Ventrilo, the Sound Input is set to built-in mic and the Mute Sound and Mute Microphone Binds are unchecked. I turned the Amplifiers up but still got nothing.
    The Ventrilo site's FAQ and setup guides have no info on the subject, and I can't find this exact problem on any of the previous posts in this discussion forum.
    Thanks...

    btw, I have already seen much ado regarding the external mic/headset difficulties people have had regarding non-amplified mics/headsets, and understand how to make that work, though I would like to know which USB headsets some of you have had success with, but I am wondering why the internal microphone wouldn't work.
    I have seen some posts claiming that even USB headsets have difficulties under Leopard that they don't have with Tiger.
    As Apple saw fit not to provide built-in playthrough from audio mini-plug line in, I have used the 3rd party LineIn software as a work around. Is there something else out there that gets USB headsets and Ventrilo to play nice together?

  • MacBook Pro with built-in speaker with weird problems

    Suddenly after a while my built-in speaker is not working properly, I can hear the sound but it is not clear and clean as before. Now there is a blur sound.
    MacBook Pro (Retina, 13-inch, Late 2012)

    For starters... if you launch PhotoBooth or FaceTime, does the camera work?  If you're trying to use it on a website, many sites access the camera via Flash.  You would need to download and install Flash from Adobe:
    http://www.adobe.com/shockwave/download/alternates/
    (select the OS X installer)
    If your camera is not working with PhotoBooth or FaceTime, let us know.

  • Add usb bluetooth to a macbook pro with built in bluetooth?

    Hello. I have so many issues with bluetooth I was wondering if I could just add a USB bluetooth instead of using the built in bluetooth on my 2009 macbook pro 15" laptop? Turning the bluetooth off and hoping for the best.

    For starters... if you launch PhotoBooth or FaceTime, does the camera work?  If you're trying to use it on a website, many sites access the camera via Flash.  You would need to download and install Flash from Adobe:
    http://www.adobe.com/shockwave/download/alternates/
    (select the OS X installer)
    If your camera is not working with PhotoBooth or FaceTime, let us know.

  • How to get photos from iphoto back onto an SD card. I have a MacBook Pro with a built in SC card slot.

    How to get photos from iPhoto back onto a SD card. I have a MacBook Pro with built in SD card slot. I have tried "Export" but this does not work.

    It's best to export the photos to a folder and then drag the folder onto the memory card.  Memory cards are usually formatted for PCs, FAT 32, which doesn't permit more than a limited number of files in the root directory. Putting the photos in a folder gets around that limitation.
    OT

  • How to make boot disk for MacBook Pro with Mavericks pre-installed

    Hi -
    I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0).  I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion.  In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk.  In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed).  I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks.  Thanks very much for any help anyone can provide.
    Shelly

    Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
        2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
        3. Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
    sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

  • The quality of built-in camera on macbook pro with retina display is far worse than any other mac. Why?

    I just got the new macbook pro with retina display like a week ago and I've been noticing that the quality of the built-in camera on it is so bad.
    It's even worse than my 2009 iMac or my sister's 2012 13" macbook pro. I don't get why this is a facetime HD built-in camera when i can obviously see that is not even near HD. Or is it just my computer. Do i have to bring it to the apple store??

    it's advertised 720p so yes it is the same as all the other MBP.  it may just be the resolution of your monitor is stretching the pixels.  Don't worry about bringing it to the apple store. 

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • Does the new MacBook Pro with Retina display have built in  IR?

    Unable to use Apple remote with the new MacBook Pro with Retina display. Does it have a built-in Infared (IR) receiver?

    No it does not. Look at the specs for it on the Apple Store website.

  • Macbook Pro with Intel Core 2 Duo says it has a 32 bit processor

    I have a Macbook Pro with a 2.53 GHz Intel Core 2 Duo, Model Identifier MacBookPro5,4 with a NVIDIA GeForce 9400M and it seems to me its a 32 bit processor when I read all Core 2 Duos are 64. I just want to make sure I'm reading this right.  Below are the specs.
      Chipset Model:    NVIDIA GeForce 9400M
      Type:    GPU
      Bus:    PCI
      VRAM (Total):    256 MB
      Vendor:    NVIDIA (0x10de)
      Device ID:    0x0863
      Revision ID:    0x00b1
      ROM Revision:    3448
      Displays:
    Color LCD:
      Resolution:    1440 x 900
    ***** Pixel Depth:    32-Bit Color (ARGB8888) ******
      Main Display:    Yes
      Mirror:    Off
      Online:    Yes
      Built-In:    Yes
    Display Connector:
      Status:    No Display Connected
    Thank you

    Agreed.   Core2Duo processors through early 2007 were a mix of 32/64 bit, which is why they couldn't always be addressed beyond 3GB of RAM.
    After then they were all 64 bit.   The graphics never increased above 32 bit, as that's all that is needed for millions of colors.  Optimizations for shade and three dimensional graphics came not from the bit of the card, but from the capacity of the graphics chip/card, measured in MB and GB.   Bit just describes the path width of the data stream.    The MB and GB of the chip/card describes the storage capacity itself.

  • HP 1312nfi Multi-funtion printer & brand new Macbook Pro with Snow Leopard

    Hi,
    I just got my Macbook Pro with Snow Leopard May 2010. I can only print and fax with my 1 year old HP 1312nfi color laserjet multi-function printer. I cannot SCAN at all. I tried loading the software that came with the printer but it wouldn't install the 'Print Director' as I had on my old iMac (with Leopard). Then I went to HP and it said not to install the software that came with the HP printer because Snow Leopard has it all. I read that there are 3 ways to scan from my computer which none of them work. I brought up the printer then clicked printer setup and when I try to bring up the 'print utility' from the last tab, it won't open anything. Where is the printer utility now? Why can't I scan? There has to be a way. HELP please?

    Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

  • What kind of longevity can I expect from the SSD in a new MacBook Pro with Retina Display?

    Hi all,
    I recently ordered a new MacBook Pro with the Retina Display. This will be both my first computer and my first Mac that uses a SSD as the primary storage device. As the title of this post suggests, what I would like to know is what sort of lifespan/longevity can I expect to get out of it? My current MacBook Pro was manufactured in 2007 and has a stock 160GB Fujitsu hard drive that has been fantastic for me over the past 4-5 years. It continues to run like a champ, and I would hope that a brand new SSD would be able to last at least that long. Given that the new retina MBPs cannot be upgraded or (easily) user-serviced, I am somewhat curious to know whether or not Apple's new proprietary SSD modules will give out/slow to a crawl before/after my new machine becomes completely obsolete. I have been searching for articles published within the past few months on whether or not the current crop of SSDs on the market are more reliable than those introduced a year or two ago, but alas, I haven't had much luck. Perhaps it is still too early to tell?
    I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.

    ARealMac(PPC)User wrote:
    ...I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.
    While I think your concern is legitimate (it was mine too), I think to some extent, how long they last will be up to you. The individual cells in the flash media in an SSD have limited life spans, and SSD controllers have a variety of techniques to spread that wear around evenly (wear leveling). That wear is exacerbated by the controller having to erase a whole block of data when even just one page needs to be changed, and if not all the data in the block is still valid, more data than necessary gets moved (write amplification). To provide some extra room for all this reshuffling of data, SSD manufacturers build in extra space that's inaccessible to the user (over-provisioning), but it typically runs about 7%. (This is a good discussion of the inner workings of all this)
    If you stuff your SSD full of files, so that there's very little room to do all this rearranging, I think you'll experience the slowdown you're concerned about. TRIM, which Apple's SSD's support, will help, but you can too. Allow plenty of free space on your SSD and perhaps partition it so that there is free space outside the partition (check this out to see what a difference it can make). You can't use it but the controller can as an extension of the built-in over-provisioning.
    You also mention that you "will most likely use it to record several tracks and store my growing library of songs and videos." Why not instead use an external SSD connected via USB 3.0 for storage? They're relatively cheap, very fast, and keep the space on your internal working drive free. A BootCamp partition would also take up space, so you might consider using Windows in a Virtual Machine instead. VMware Fusion or Parallels would be installed on the internal SSD but the virtual machine files could  go on the external.
    In any case, your data is more important than your SSD, so back up, back up, back up.

  • How can I disable the internal display on my MacBook Pro with connected external display?

    I used this metod with the MagSafe power cable connected (see http://osxdaily.com/2012/06/15/yet-another-way-to-turn-off-internal-lcd-display- of-macbook-pro-with-lid-open/).
    Open System Preferences and click “Mission Control”, then click on “Hot Corners”
    Select a hot corner and pull down the menu to select “Put Display to Sleep”
    Now connect the external display to the Mac and move the cursor to the newly created sleep corner to turn off the internal display
    Close the MacBook lid and wait a few seconds before opening the lid again, the internal display should stay off while the external display will be powered on
    This worked great under Mac OS X 10.7.4, but after the last update to 10.7.5 it doesn’t work more. The built-in display turns off really, but a few seconds after opening the lid it lights up again. Do you have any suggestions? Dimming the brightness or clamshell mode is not very useful.
    MacBook Pro 13-inch,
    2,7 GHz Intel Core i7,
    Mac OS X Lion 10.7.5 (11G56)
    Thanks!

    I have the same problem: not able to work with my external display mirroring the internal one - while shutting the internal display off.
    I believe there is an issue with Mac OS X Lion 7.5 that Apple needs to solve, since apparently it does not happen with this version of the OS only...
    https://discussions.apple.com/thread/4315808?start=45&tstart=0
    Or any other way to solve it?
    Mac Book Air, 13-inch Mid 2011
    Mac OS X Lion 10.7.5 11G63
    Thank you!

  • Is there a way to digitize audio using the headphone input on the 15-inch (late 2013) Macbook Pro with Retina display?

    I'd like to digitize audio from a minidisc player into my 15-inch (late 2013) Macbook Pro with retina display, but can't see a way to change the internal mic input.  I understand that previous MacBooks allowed the headphone jack to double as a mic input, but mine doesn't seem capable of switching.  I've tried using a mini to mini cable, with no luck, and also tried using a headset splitter adapter (3.5 mm 4-pin to 2x3-pin 3.5 mm headset splitter adapter from Amazon) because I read that that would allow me to plug in headphones and input audio.  But in both cases, the only "input" available in my sound preferences is the built-in internal microphone.  Am I missing something?  Is there a way to digitize audio through the headphone jack? 

    Not likely. headphone jacks are usually output only devices unless specifically stated to support input, and even then, it may not be audio input that they support, but merely control input for volume and such.
    You can get a USB audio input instead. i.e:
    http://www.amazon.com/Griffin-Technology-iMic-Audio-Device/dp/B000BVV2IC

Maybe you are looking for