MacBook Pro with Cinema HD 30"

Does MacBook Pro 2.0 Ghz video adapter (ATI Radeon XT1600) suitable for Apple Cinema HD 30" connection?

The MacBook Pro's built-in video will work fine with a 30" Cinema Display.

Similar Messages

Restarting MacBook pro with cinema display and lid closed?

Is it possible to restart the macbook pro with its lid closed when it is hooked to an apple 20" cinema display?
I have a 15" macbook pro 2.33GHz and want to be able to use it like a desktop system with just the external display when I am at home.
Also should I worry about heat issues running it with the lid closed sitting on the wood desk top?
Thanks

Thanks, I just realized that I phrased my question rather badly.
My real problem is how to start my computer without opening up the lid. I have a stand on my desk that the display is on and the macbook slides under when it's closed. Having to unplug it and pull it out every time it is shut down and needs to be started is rather a pain. The button on the side of the display seems to work for sleep/restart/shut down, but it doesn't seem to be able to start the computer once it is shut down; so my question is, is this possible?... am I dreaming?
Macbook Pro 15" 2.33GHz Mac OS X (10.4.9) 20" apple cinema display

MacBook Pro with Cinema Display - No Picture

I have a 2.16 Core Duo Macbook Pro 17". Today I purchased a 30" Cinema Display at the Apple store.
Because of issues I had heard about I had the Apple employees help me open the box and plug in the monitor to a Macbook Pro on the floor to check for dead and hot pixels and other screen problems. None found. I was so psyched!
I get it home and set it up. I run the DVI cable over to my Macbook Pro and nothing... The MBP screen goes blue and then refreshes when the monitor is attached or detached like it detects it, but under system profiler it never registers an additional display (and I did refresh the info). The soft power button on the Cinema Display triggers my computer to give me the shut down/sleep dialog so something is registering.
Basically everything works on the display but the picture. I just get a black screen. I hooked up my wife's G4 1.67 and it drives the screen just fine with a picture.
Any thoughts?

Turned out it was a bad DVI port on my Macbook Pro. Logic board replaced and issue fixed.

Power up Macbook Pro with 23" Cinema Display without opening Laptop lid?

Hi there,
I've just bought an Apple 23" Cinema display to use with my Macbook Pro.
I just have a quick question for working this setup. I'd like work with just the 23" display in use (i.e. laptop lid closed, due to desk space), but can't figure out how to turn on the Macbook Pro without opening the lid to the laptop for the power button!
This may sound like a silly question and I may be overlooking something as I've only had the setup for a hour, but it'd be a major pain in the ar*e if I had to open the laptop to turn it on every day, then close the lid again (and possibly go through the 'Are you sure you want to go into sleep mode...' process each time).
Can I avoid opening the laptop when connected to the 23" display? There is a power button on the display, but it only seems to put the Mac into sleep mode when it's already on, i.e. it didn't seem to work when I tried to use it to turn the Mac on from being off.
Thanks for any advice on this.
Ste

These Apple tech notes may help:
How to use your PowerBook G4, MacBook Pro or MacBook with the display closed
How to use your PowerBook G4, MacBook or MacBook Pro with the display closed and a Bluetooth keyboard or mouse
Just a final question about Sleep mode - does this have any negative effects on the life or performance of the laptop? I'm so used to Shutting down the laptop each day that I worry about Sleep mode having some sort of drain on the components or something.
There are only two practical differences between Sleep and Shut Down:
1. Sleep will wake instantly, so you don't have to wait for startup.
2. Sleep will drain a new, fully charged battery after several days without being woken or plugged in. If you shut down, the battery charge lasts much longer. Obviously, if you only sleep it overnight, you'll still have plenty of battery left in the morning.
Don't sleep it more frequently than necessary, though. Frequently turning the backlight and hard drive off and on can shorten their life. Just do what's reasonable. I usually leave mine awake until I have to transport it in a bag, along with sleeping it overnight. On battery, I'll sleep it more often to preserve battery.

MacBook Pro with external display sometimes

I want to use my MacBook Pro with my external display (Apple 23 inch Cinema) when I'm at my office, and to have Spaces set up and optimized for that. When I'm at home or on the road, I want Spaces set up differently, optimized for the MacBook Pro display only (no external display). Can I do this? Do I need to set up separate accounts on the MBP to do this, or can I do it some other way? Can you have sets, or multiple instances of Spaces? Otherwise, I want both options -- at work with MBP display plus Apple 23 inch Cinema or MBP display only -- to be able to access all of my files and software. The only real difference in the two setups would be the amount of screen real estate and where/how Spaces works within these different screen "landscapes."

You will always have to use the power button to turn it on, and you'll have to open the display for that.
Apple supports using the machine with its display closed, provided you follow the instructions in this article. As long as you do that, it shouldn't cause any harm. But I wouldn't recommend seeing how hot you can get the MBP with the display closed.

MacBook Pro with Retina display to imac

Hi
Can i connect a MacBook Pro with Retina display to a mid 2010 imac 27" ? in ANY way? to use as a second screen... HDMI to mini display.. ive a feeling i know the answer but its worth asking.....
thanks!

Ha, "their" my teenagers would certainly point that out.
"true to say the imac isn't the most upgrade friendly"
Well it's just taking that front glass and the LCD off. The earlier ones had the hidden latches and the special tool to release it. "Took quite a technique to remove it. I just did one where someone had just broken the latch and glued it back.
"i just replaced the dvd drive, i could never go back to mechanical."
That's for sure. As soon as I put my first SSD in this early 2011 MBP 13" I realized that there was a reason why all the Airs could get buy with just 2 or 4 GB RAM.
"currently budget isn't an issue"
That must be nice.
"this is testament to apple - there is no way a pc would have held up this well,"
Yes, I'm still using a 20" and 2 22" ADC Apple Cinema Monitors on my workbench w/ a 2002 Power Mac MDD G4, a 2011 Mini i5 and a 2006 iMac. There's a working SE and IIfx in the closet.
" initial pain of purchase"
Yup that IIfx originally cost $9,900 in 1990. I got it for half price!
There's a 27" iMac for sale here in the NW. I'm looking at it to replace the Core 2 Duo.
"imac is still a great machine with a georgeous screen"
Yup until last year I administered 88 PCs at a charter school. I found looking at those displays and jittery windows all day long really irritating. Of course I'd try to "2 finger scroll" and use "Gestures" to move to a new desktop until I remembered "Oh right, PC, crap."
Good luck and thanks for the checkmark.

Macbook Pro - Dual Cinema Displays?

I know you can only have one dual-link 30" cinema display, but is it possible to dual-screen with two 20" or 23" cinema displays on a Macbook Pro with the built-in display disabled?

You can use a Matrox DualHead2Go Digital Edition
<http://www.matrox.com/graphics/en/gxm/products/dh2go/digital/home.php>
The other option is a Magma ExpressBox
<http://www.magma.com/products/pciexpress/expressbox1/index.html>
with a NVIDIA GeForce 7300 GT
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=C2 69DC41&nplm=MA567Z/A>

Is it dangerous to run MacBook Pro with lid shut ?

Hey Gang,
I run my MBP17 through a Cinema Display when I'm home. I've always kept the lid open a smidge for cooling. Also, I turn off the 17's display to give it a break while I enjoy the Cinema's larger real estate. Question: "Is it dangerous to run the MacBook Pro with it's lid shut ?"
Grateful in advance...
~ FLAKBAIT

Yes, leave it open a smidgen like you have been doing.

15" MacBook Pro / 30" Cinema Display - performance?

Is anyone usng a current (Early 2011) 15" MacBook Pro with a 30" cinema display? Having any performance issues?
I'm using Photoshop 5.1 and after a short time the perforance lags (drastically, and cursor is offset etc.) It almost seems like the cache/buffer are not being cleared. I spoke w/Apple tech and they offered no known issues. I repaired permissions, reset cache, reset PRam, etc. (as directed). Now running WITHOUT CInema Display. PShop seems to be OK. Will try for awhile longer, then re-attach Cinema to test. My guess is the installed video hardware/ram is just not up to the task.
I did upgrade to 8GB RAM -which should help. There is no Apple Hardware test available for this Mac (does not ship w/OS DVDs) but the Apple tech said there would be a startup alert if there were RAM issues.
Wondering if anyone else has experienced similar?
Maybe I should try for an upgrade to the higher spec 15" MacBook? (has more VRam, faster card etc -not much else)

Thanks ALiALKi -but I already tried to access the Apple Hardware test online -NG. The Apple tech said it would not work with this unit. Apparently this MacBook was updated to Lion BEFORE sale Lion was NOT originally installed. So for some reason it won't access the online test (I tried carefully numersous times)
Also, as mentioned in OP -the ram is tested on startup & there would be an audible alert if defective (according to the tech I spoke to) I do have an appt at an Apple store for further testing.
Still looking to hear from anyone who is running a 30" Cinema Display with this -or other laptop.
Thanks

How to connect an older MacBook Pro with mini VGA port to HDMI?

I have an older MacBook Pro with a female mini VGA port. I would like to watch movies which have been downloaded to my laptop on my flat screen TV. Newer MacBook Pros have a mini DisplayPort for which Belkin makes a cable to use; however, I have not been successful in finding either an adapter or converter to use with my older laptop.
FYI. Am currently using Leopard but am upgrading to Snow Leopard.

I believe you naeed the Apple ADC to DVI adapter.

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

HP 1312nfi Multi-funtion printer & brand new Macbook Pro with Snow Leopard

Hi,
I just got my Macbook Pro with Snow Leopard May 2010. I can only print and fax with my 1 year old HP 1312nfi color laserjet multi-function printer. I cannot SCAN at all. I tried loading the software that came with the printer but it wouldn't install the 'Print Director' as I had on my old iMac (with Leopard). Then I went to HP and it said not to install the software that came with the HP printer because Snow Leopard has it all. I read that there are 3 ways to scan from my computer which none of them work. I brought up the printer then clicked printer setup and when I try to bring up the 'print utility' from the last tab, it won't open anything. Where is the printer utility now? Why can't I scan? There has to be a way. HELP please?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

HOW DO I FIND THE EJECT BUTTON ON MACBOOK PRO WITH RETINA

i have a macbook pro with retina display , and i want to know how i eject the disc from the apple external optical drive i can't see the eject button on the keyboard layout.

Ralph Landry1 wrote:
Works for me every time without failure.
It's not a matter of failure, it's the idea of training people to associate the Trash with unmounting a volume. The Trash is a mechanism for the permanent deletion of your data, and designed to appear as such. Apple haters used to laugh at this..."Eject by dragging to the Trash? And you say the Mac is intuitive? Ha ha ha..." And they were right. It's better to teach ways that actually make more sense.
The great thing about all the newer ways is that they are easily discoverable, you don't have to remember or figure out that you have to virtually trash your disk. A new user would naturally expect to find an Eject command or button, and there they are in plain sight.
SwankPeRFection wrote:
I always find a ton of mounted installers left behind by users who install stuff on their systems. I don't understand why Apple cannot make an automated process to unmount the installer once it's done. Just seems stupid to me I guess. I've seen that mounted installer confuse people into clicking on it each and every time they want to start the app because they don't understand that once it's installed, that installer should be ejected because they're done with it.
I agree about the installer volume behavior...and Apple made it worse in Mountain Lion by putting the volumes on the bottom of the Finder sidebar, which is often out of view. Incidentally, drag-to-trash does not seem to work with volumes in the sidebar, but the other Eject methods do.
The "installer problem" is another reason I love the other methods much more than dragging to the trash. To eject multiple volumes by selecting them and pressing Command-E is much faster than the time taken to gather them up with the mouse and drag all of them to a specific spatial target.

MacBook Pro with Cinema HD 30"

Similar Messages

Maybe you are looking for