Macbook pro with firebolt doesn't consistently turn on duo monitor.
For some reason, my duo monitors do not work. Sometimes it does, then doesn't. I keep unplugging the firebolt connection, wait a minute, then plug it in. There are times where I do this five times, then it decides to work. I am using a mac 20 cinima display (old model) but still works great. However, I am wondering if this older monitor ould be the issue? Help!
Try another charger if possible.
Try PRAM reset. No harm done.
Reset PRAM. http://support.apple.com/kb/PH4405
Similar Messages
-
Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
thanksYes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
I have a Mid 2009 15 inch MacBook Pro with 2.53 GHz Intel Core 2 Duo and 4 GB 1067 MHz DDR3. Can this MacBook be upgraded to 8GB? If so, what type would you recomended
Awesome! Thank you What about the Corsair brand?
http://www.amazon.com/Corsair-DDR3-Laptop-Memory-CMSO8GX3M2A1333C9/dp/B002YUF8ZG /ref=cm_cr_pr_product_top -
How do I update my macbook pro with 2.33 GHz Intel Core 2 Duo processors from OSX 10.5.8 to 10.7?
Firefox 16.0.2 was the last to work on the old Mac OSX 10.5.x as Firefox 17.0 to current has required OSX 10.6+
https://www.mozilla.org/en-US/firefox/16.0/system-requirements/
https://www.mozilla.org/en-US/firefox/17.0/system-requirements/ -
I have a macbook pro with a 2.16 GHz Intel core Duo processor. Can I install the iOS 5 software
I have a macbook pro with a 2.16 Ghz Intel core Duo processor. Can I install the iOS 5 software?
iOS 5 is for iDevices, not OS X. Your iDevice would only require 10.5.8 or later. If you have a Mac with a Core Duo processor then you cannot install Lion but you can install Snow Leopard provided you have at least 1 GB of RAM installed.
-
My Macbook Pro with Maverick doesn't work properly when I restart it.
Hello,
I updated my O.S to Maverick in my Macbook Pro and this doesnt work properly with my wifi device BEAREXTENDER 1200.
I got this error when try to restart my computer.
I need some help : (
Thank u
Anonymous UUID: 2978698B-71D7-C168-62D2-BD94545F8053
Thu Dec 5 13:40:36 2013
panic(cpu 0 caller 0xffffff80040dc19e): Kernel trap at 0xffffff8004050944, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x0000000005bb7000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0xffffff801999efd8, RCX: 0x0000000000000000, RDX: 0xffffff80046cb940
RSP: 0xffffff80f4bfba00, RBP: 0xffffff80f4bfba30, RSI: 0xffffff801999e000, RDI: 0xffffff8006bdd360
R8: 0xffffff80046d2b30, R9: 0x0000000000000000, R10: 0xffffff80f4bfb990, R11: 0x0000000000000009
R12: 0xffffff801999e008, R13: 0x0000000000000000, R14: 0xffffff801999e000, R15: 0xffffff8006bdd360
RFL: 0x0000000000010246, RIP: 0xffffff8004050944, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000008, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f4bfb690 : 0xffffff8004022f69
0xffffff80f4bfb710 : 0xffffff80040dc19e
0xffffff80f4bfb8e0 : 0xffffff80040f3606
0xffffff80f4bfb900 : 0xffffff8004050944
0xffffff80f4bfba30 : 0xffffff800405151a
0xffffff80f4bfbb10 : 0xffffff80044836e6
0xffffff80f4bfbb30 : 0xffffff7f859ad608
0xffffff80f4bfbb60 : 0xffffff7f859959b7
0xffffff80f4bfbb80 : 0xffffff800444c3d3
0xffffff80f4bfbbb0 : 0xffffff800444c24d
0xffffff80f4bfbbd0 : 0xffffff8004461e74
0xffffff80f4bfbbf0 : 0xffffff8004490e44
0xffffff80f4bfbc70 : 0xffffff8004490477
0xffffff80f4bfbcb0 : 0xffffff800449020a
0xffffff80f4bfbd10 : 0xffffff80044917dc
0xffffff80f4bfbd20 : 0xffffff7f84a7172a
0xffffff80f4bfbd40 : 0xffffff7f84c30b46
0xffffff80f4bfbd80 : 0xffffff7f84c305b6
0xffffff80f4bfbde0 : 0xffffff7f84c26980
0xffffff80f4bfbe20 : 0xffffff7f84c293a9
0xffffff80f4bfbe70 : 0xffffff800449fe19
0xffffff80f4bfbf00 : 0xffffff8004498b6b
0xffffff80f4bfbf20 : 0xffffff800404a15a
0xffffff80f4bfbfb0 : 0xffffff80040d6aa7
Kernel Extensions in backtrace:
com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f84a5d000->0xffffff7f84abbfff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f846ba000
com.apple.driver.AppleUSBHub(650.4.4)[1229941E-4CB9-3F57-B0A6-4A0AD595025D]@0xf fffff7f84c24000->0xffffff7f84c3afff
dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f84a5d000
com.Ralink.driver.RT2870USBWirelessDriver(4.2.5)[EFF2AF46-F4BA-4385-137E-84630B 6FD95B]@0xffffff7f85994000->0xffffff7f85a2bfff
dependency: com.apple.iokit.IONetworkingFamily(3.2)[1EAD69CB-6AB4-387F-94C4-8FAAFF28354C]@0 xffffff7f856fc000
dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f84a5d000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000003e00000
Kernel text base: 0xffffff8004000000
System model name: MacBookPro10,2 (Mac-AFD8A9D944EA4843)
System uptime in nanoseconds: 6704494044889
last loaded kext at 4782368779468: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f8559b000, size 20480)
last unloaded kext at 4972309781655: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f8559b000, size 16384)
loaded kexts:
com.Ralink.driver.RT2870USBWirelessDriver 4.2.5
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AGPM 100.14.11
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleIntelHD4000Graphics 8.1.8
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleIntelFramebufferCapri 8.1.8
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleSDXC 1.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBXHCI 650.4.3
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOSurface 91
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOAcceleratorFamily2 98.7.1
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro10,2, BootROM MBP102.0106.B03, 2 processors, Intel Core i5, 2.5 GHz, 8 GB, SMC 2.6f59
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x10F), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Network Service: Thunderbolt Ethernet, Ethernet, en3
Serial ATA Device: APPLE SSD SM128E, 121,33 GB
USB Device: Hub
USB Device: 802.11 n WLAN
USB Device: FaceTime HD Camera (Built-in)
USB Device: USB Receiver
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4The panic was caused by the Ralink device or its software. I suggest you disconnect the device, back up all data, and then remove the software according to the developer's instructions.
-
Help with InDesign and using MacBook Pro with 2.4 GHz Intel Core 2 Duo with 2GB
Have a Mac Book Pro running 2.4 GHz Intel Core 2 Duo with 2GB RAM is there anyway to use InDesign and if so what version would run on this machine and would I still be able to interface with a printer to produce a magazine? Or is it possible to upgrade/gut this machine for a new processor and RAM, if that is even possible, and could I then run a CS program say 5.5?
Thanks for all the help - it is confusing though. I tried to download the trial version of CS5.5 to explore before buying the student version and the program download froze. I have deleted the doadload assistant and spoke with Adobe who told me my machine would not be compatible unless I upgraded - maybe the RAM to 4GB.
You got bad (wrong) advice.
If the download didn't work, it has nothing to do with the performance characteristics of your machine. You could download CS5.5 on a low-end PC from 10 years ago, it doesn't take much.
Unfortunately Adobe's download manager is a bit flakey. Best advice is to use Firefox and try the download again.
It doesn't have anything to do with the power of your computer, be it speed, processor type, or RAM.
Make sure you're using FIrefox (if not, download and install it first), and then try the download again.
Also, the download manager depends on Java. Make sure you have Java installed (but I think you must, because otherwise the download would not have started?).
If it still doesn't work, give us some more detail. Error message? Screenshot? -
A New Macbook pro with a Dell ST2310 23in. Full HD Monitor
I have a new macbook pro hooked up to a dell Full HD monitor using mini display port to VGA connection. And the fonts on are not that crisp. They are a little jagged. The res is set at 1920x1080, 60.0Hz. Is there something I can do to fix this? I've been on dells site and there is not much support for mac users.
thanks
KarenThings would be working better from a digital connection. But if you must use VGA, check the Dell site or the user manual for how to "tune" the display. There is usually an AUTO adjust shortcut for this through one of the front panel buttons.
-
I keep getting told my browser needs updating and it doesn't work right on some websites. I have had unhappy experiences in the past trying to update Apple OS and Firefox due to compatibility issues. I suppose I could switch to Safari but I have been using Firefox for many years and would prefer to stick with what I know.
Firefox 16.0.2 was the last to work on the old Mac OSX 10.5.x as Firefox 17.0 to current has required OSX 10.6+
https://www.mozilla.org/en-US/firefox/16.0/system-requirements/
https://www.mozilla.org/en-US/firefox/17.0/system-requirements/ -
I have a macbook pro with retina (late 2012) what is the best monitor for work?
I would like to purchase a monitor to connect to my laptop with good resolution that will be better for my eyes. Do you think that I will expirience problems If I get a 4K monitor and Ill run it with full resolution @30hz? i do not use any videos in my work or gaming. I am a commercial real estate broker. Just internet use and exel. Thank you in advance
A Dell ultra Sharp would be a good buy. Depending on what size you want:
http://www.amazon.com/Dell-UltraSharp-27-Inch-LED-Lit-Monitor/dp/B00P0EQD1Q
Otherwise, if you don't mind spending the money, and not worried about not using the monitor to its fullest this BENQ is an excellent monitor
http://www.amazon.com/BenQ-BL3201PH-Monitor-32-Inch-LED-Lit/dp/B00O1B5M9I/ref=sr _1_11?s=electronics&ie=UTF8&qid=1424384286&sr=1-11&keywords=4k+monitors -
MacBook Pro with Retina Display Rosetta Stone Issues
I just tried to install Rosetta Stone on my 15" MacBook Pro with Retina display. It turns out that Rosetta Stone does not work with even the poorest display quality on a Retina Display. It needs a 1024x768 display max. Any suggestions?
You aren't the only one... See this nearly 500 page thread... https://discussions.apple.com/thread/4034848?start=0&tstart=0.
Clinton -
I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise? During installation emptied cache, etc. Backed up using time machine, fortunately.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
At the moment i'm using my macbook pro with an ethernet cable = where i'm now i don't have wi-fi -> now i'm trying to do a wi-fi hotspot for my iphone through my macbook pro, but it's doesn't work - please help me!
Theres almost a trick to it for first time users, goto SETTINGS...General......Cellular (if Verizon) ....Personal Hotspot, turn it on.....turn on wifi on your Mac, select your Iphone. Enter password.
If you take too long doing it, youll need turn turn off and on real quick the "personal hotspot" slider on the Phone.......then go quick again thur the Mac. -
I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?
Dear Jean:
It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
Open System Preferences.
Choose the Displays Icon
There will be several tabs to choose from pick Arrangement
Drag the toolbar to desired display
Let me know if this helps at all!
Lance -
I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.
Likely because it's a not self contained and/or it's game and copy protected, so install it via the developers instructions instead, which likely means it will have ot be uninstalled off the first machine, the developer contacted for a new license key before installing on the newer machine.
If you want it on both machines, you will need to likely buy another license.
Most developers are fine with transfering license between machines, you have to contact them.
They just want to make sure it's only on one machine so they are not getting robbed.
Maybe you are looking for
-
Accessing JFX from Java or find a workarround
Hi there, I'm a new one ... I'm working on this project designing applications for a touch panel. I've written a little Java app that uses JNA to access the driver and grab the coordinates of touches on the panel. Works fine so far ... Now I'm creati
-
Regarding characteristics subordinate values
Hi gurus I have a requirement I have a characteristics with two values and each value have 4 subordinate values, my requirement is eg say 10_1000 with subordinate values as 10_1001, 10-1002, 10-1003, 10-1003 and 20_2000 with subordinate values as 20_
-
How do i take the content of an html file and put in in an xml. The part that's in the CDATA are now individual html files so I want to take the content of that html file and put it in the CDATA. I'm not sure if that's the best way to do it though...
-
Apple TV and sharing purchase on iPad
Purchased a full season TV show on our Apple TV, and works fine. However, we would like to watch it on our iPad and its not showing up. Any suggestions? (This is a purchase not a rental)
-
Vpn from 40 Server to Main One
I need to build this scenarios: 40 slave servers with win2003 need to connect to main one(is a dc) with data encryption, the main one using the ipsec vpn to start query to the 40 servers(only when it needs outside data). Actualy i have in production