Macbook Pro with Retina Display with Dell U2412m external monitor

I recently purchased the Dell U2412m monitor on Amazon hoping to use it as my external monitor to my Macbook pro 15" with retina display, however, when I finish setting it up, there's a red/pink vertical line showing on my screen. Does anyone know what seems to be the problem and how do I get rid of the line. Is there anything I need to set up on the monitor to make it compatible with MBP with retina?? Thanks in advance.

I used a mini display port to display port cable and my screen looked fine. My problem was that the USB ports did not work and dealing with Dell customer service was a nightmare.

Similar Messages

  • I have a macbook pro 15" Retina Display with 2.6 ghz and 8gb of ram yet when i try to download a HD movie from itunes it says my computer doesn't support HD?

    i have a macbook pro 15" retina Display with 2.6 ghz and 8gb of ram when i try to download an HD movie from itunes it says my computer doesn't support HD? i went to the support on the apple website and looked at the specs that a computer has to meet in order to play HD movies and mine is well above them. Why can't i play the movies?

    That would at least partially explain it.
    These MacBook Pros drew more power than the power brick could readily supply, and so would only run at top speed when the power brick was supplemented by the battery.
    Though the applicable tech note has been removed, it stated:
    "If the battery is removed from a MacBook or MacBook Pro, the computer will automatically reduce the processor speed. This prevents the computer from shutting down if it demands more power than the A/C adapter alone can provide."

  • Can a macbook pro 13" retina (mid-2014) run 2 external monitors with 2560x1440 resolution?

    Can a macbook pro 13" retina (mid-2014) run 2 external monitors with 2560x1440 resolution? If not what if I turn off the macbook internal display? I

    Yes.
    http://support.apple.com/en-us/HT204154
    Ciao.

  • MacBook Pro 15" Retina display with distorted graphics.

    I have a MacBook Pro 15" Retina display purchased in Nov. 2014.  When surfing the net areas of the screen will sometimes begin to display distorted or blinking graphics.  The distoreded area are usually about 2" high by 3" long of either blinking text or filled many small rectangles of distorted graphics.  I ran diagnostics and no problems found.  Here is a link to a video of the problem.
    [URL=http://i1062.photobucket.com/albums/t492/bmwblock/Motorcycle/This%20One2_zps1ywf 85ms.mp4][IMG]http://i1062.photobucket.com/albums/t492/bmwblock/Motorcycle/This% 20One2_zps1ywf85ms.mp4[/IMG][/URL]
    Thanks
    DC
    Message was edited by: dalefromdeatsville

    Howdy dalefromdeatsville,
    Thanks for using the Apple Support Communities.
    To troubleshoot this issue where you're seeing graphical distortion on your Mac's display, please follow the instructions below.
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Cheers,
    Alex H.

  • Please can someone tell me what cable I need to connect my Macbook Pro 15'' Retina display to a Yamakasi Catleap Monitor?

    Hi all,
    I have a Macbook Pro 15'' Retina and I'm thinking of getting a Yamaksai Catleap Monitor, please can someone tell me the best way to connect this? Do I need a thunderbolt to DVI connector, or Thunderbolt to VGA? Im assuning the former would be superior! Please can someone advise?
    Thanks very much in advance,
    Cheers,
    Guy

    Hello, 
    Some UK links... You can use any of the following to get the video signal out of the iMac and into a standard format:
    Mini DVI - DVI
    Mini DVI - VGA
    Mini DVI - Composite/S-Video.
    The DVI will give you best quality, but VGA will be simpler. The DVI to HDMI connector is:
    Buy a DVI to HDMI connector (link). Long HDMI cables are pretty expensive though.
    Although HDMI can handle sound as neither DVI, MiniDVI nor VGA do you'll need to connect the sound separately. Simply connect the sound out on the iMac to the input on the TV using a cable like this:
    3.5mm to RCA.
    If you use the miniDVI to VGA connector here's a long VGA cable (link).
    All Macs since about 1999 have had +DVD Player+ installed. I'm not at my Mac right now to check Front Row in Leopard but Front Row in Tiger certainly played DVDs (but +DVD Player+ is a better, more flexible DVD Player).
    cheers
    mrtotes

  • 2013 MacBook Pro 15 retina display with broken screen

    My girlfriend broke my screen on my 15 inch Macbook pro 2013. will the warranty cover the replacement of the screeN. How much will it cost to replace screen

    No, the Apple warranty for Macs does not cover accidental damage.

  • Macbook Pro w/ Retina Display Issues with Wifi with Bluetooth.

    I have a Macbook Pro with Retina Display, 2.3 Ghz model.  I've noticed that while on wifi, when I use a bluetooth mouse or even turn on bluetooth on my computer, the wifi performance severely decreases for a short period of time.  While using a bluetooth mouse the wifi intermittently fails and I need to shut off wifi and turn it back on to correct the issue.
    Using the ping utility on terminal I have confirmed this in that when bluetooth is turned on, a large number of packets are lost for about ten seconds.
    Has anyone else been experiencing this problem and is this an issue I can correct myself or should I contact Apple?
    Thanks

    I have the same issue with my macbook pro with retina display. I have 2 macbook pros. I never would of thought that a bluetooth signal was interfering with both of them. I had a gateway wireless router that only had 2.4 Ghz 802.11 b/g, which is the same frequency of bluetooth. I know that bluetooth bounces from channel to channel, whereas wifi sticks to one constant channel (normally). I have reinstalled my mac twice, thinking that somehow my drivers were corrupted. This was false becuase everytime I reinstalled it did the same thing, Act fine for 5-10 minutes and randomly the internet connection would freeze up all together for 10-20 seconds. I have also tried contacting apple multiple times and they tried to do a smc and pram reset. They also tried to get rid of my chaches in my computer. It all seemed to be fine, and then when I got off the phone it would act us once more.
         I have read numerous articles to try and fix the situation; one of them was to try change the location of the network and change the MTU size. No help. I called At&T (my internet provider) and got a new router and that did work for a while. But eventually acted up again. The router was still 2.4 GHz 802.11 b/g. I read this article and found out that my Magic Mouse might be causing the issue. Turns out to be true. Everytime I would browser the internet or browse the itunes store and it would freeze, i would immediatly turn the bluetooth off and what do you know, it works!!! This is a huge dissapointment in apple however. It seems to be only a macbook pro w/ retina display issue. My other macbook pro only acts up when i'm using my newer one (something is wrong with the bluetooth and wifi in the retina for the 2.4 ghz frequencies.
         I just got a Airport express, and have not experienced this issue what so ever. This is due to the fact that it is a dual band wireless router. It supports 2.4Ghz and 5 Ghz both at 802.11 a/b/g/n which is a major improvement compared to what I had. I use the 5Ghz frequency and have no issues still.
         This is still an issue however because if I want to go out and use anothers persons wifi, I can't control their frequency. So I will still have this issue.

  • Apple care Model MD012LL/A can be used with MacBook Pro 15" Retina display model MC975TH/A (Model selling in Thailand)?

    Apple care Model MD012LL/A can be used with MacBook Pro 15" Retina display model MC975TH/A (Model selling in Thailand)?

    Why not?

  • Apple care  with MA515LL/A complatible with new MacBook Pro 15" retina display?

    Apple care  with MA515LL/A complatible with new MacBook Pro 15" retina display?

    No. The AppleCare for this MacBook Pro is this

  • Boot up time of MacBook Pro 13" 2.5GHz i5 vs MacBook Pro 13" with Retina display with 2.4GHz i5

    Hello
    Does anyone know
    "the boot up time of MacBook Pro 13" 2.5GHz i5 vs MacBook Pro 13" with Retina display with 2.4GHz i5?"
    Thanks

    A bit simplifying :
    there are two parts in boot process - one-before spinning thing, other - spinning thing to desktop.
    First part is hardware inits, you can not speed it up. It is for sure longer for your MBP than for her - its normal, more hardware and it is more sophisticated so longer init.
    Second part depends on HD (SSD) speed.
    Say so - I have M4 SSD and second part is 1 to 2 spins until login window. Should be more or less same for you.
    If it is not so - probably something is not good with filesystem and some config files, most probably due to cloning instead of install. Reboot from recovery, repair drive (first - drive as a whole, second - boot partition), then reboot permissions. reboot two times as normal. see what'll happen with timing.

  • HT201364 Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machin

    Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machine? Strange as I have just downloaded Pages, Numbers and Keynote...free? Thanks and Regards
    Brian

    Welcome to Apple Support Communities
    You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
    You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
    Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718

  • My macBook Pro has no display  with 3 repetitive beeps. What is wrong?

    My macBook Pro has no display  with 3 repetitive beeps. What is wrong?

    Bad RAM. Reseat it and see if that clears it up. If not then that need to be replace or the actual RAM sockets have gone bad.

  • If possible connect my desktop (mac) with my MacBook Pro like secondary display with thunderbold

    I wnat to  connect my desktop (mac) with my MacBook Pro like secondary display with thunderbold (in the other side is working)

    Hello edolillo,
    It sounds like you are wanting to use your iMac as a secondary display for your MacBook Pro using a Thunderbolt cable. If your iMac is compatible, you may be able to use Target Display Mode, and this article outlines the requirements for it:
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/ht3924
    Target Display mode Requirements:
    What are the requirements for TDM?
    A Mac notebook or desktop with a Mini DisplayPort or ThunderBolt connection
    A ThunderBolt or Mini DisplayPort cable 
    A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
    iMac Model
    Cable Supported
    Port on Source Computer
    iMac (27-inch Late 2009)
    Mini DisplayPort to Mini DisplayPort
    Mini DisplayPort or Thunderbolt
    iMac (27-inch Mid 2010)
    Mini DisplayPort to Mini DisplayPort
    Mini DisplayPort or Thunderbolt
    iMac (21.5-inch, Mid 2011)
    Thunderbolt to Thunderbolt
    Thunderbolt
    iMac (27-inch, Mid 2011)
    Thunderbolt to Thunderbolt
    Thunderbolt
    iMac (21.5-inch, Late 2012)
    Thunderbolt to Thunderbolt
    Thunderbolt
    iMac (27-inch, Late 2012)
    Thunderbolt to Thunderbolt
    Thunderbolt
    If your iMac model is supported, there are steps in the article to help you get that set up.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • How to install Windows 8 on Macbook Pro w/ Retina Display?

    Hi,
    I'm new to Macbook Pro w/ Retina Display. I'm a non-tech guy. Well, I'm familiar with Windows PCs but not familiar with Macbook Pros and OS X.
    Please if you people can step me step by step that how to Install Windows 8 on Macbook Pro w/ Retina Display 15 inch.
    Because recently, Apple released OS X Update 10.8.3 which includes support for Windows 8 in Boot Camp.
    I will be very thankful. Please help!
    Thanks

    Hi Mende1,
    Thanks for the fastest reply. Well, As I said I'm non tech noob on Macbook Pro.
    Well, The Guide is simple but there are few questions which I'm not able to understop still.
    1. How to get the copy of Windows 8? I have bought Windows 8 Ultimate and I have Genuine Key with me but I don't have files.
    2. Secondly, I have Bluetooth Apple Wireless Keyboard and Magic Mouse, Is this compatible with Windows 8?
    Thanks

  • I just brought Macbook pro(without retina display) on 15 june 2013 and since then put it on 6-7 hours of charging but still my macbook pro is not 100% charged. but why? (green light is displayed on the adapter pin)

    i just brought Macbook pro(without retina display) on 15 june 2013 and when i switched it on the battery was 72 % charged and now the battery is charged to 62%, i used the charger that came with it and kept it for 6-7 hours on charging but it is not charged to 100% but why? also the green light is always on when i plug the charger with my mac book pro.Please tell me the meaning of Green light on power cord lid (mac book pro not charging or charging?) and also the other light if there like amber or any other colour.

    Hello Shailendras33,
    Congratulations on your new MacBook Pro!  Thank you for providing all the information about what is going on with the charging issue. 
    Firstly, I found some information on page 11 of the MacBook Pro User Guide about what each color of the LED means on the Power Adapter:
    When you first connect your power adapter to your MacBook Pro, an indicator light on the
    MagSafe connector starts to glow.  An amber light indicates the battery is charging.  A green light indicates that the battery is fully charged.
    You can find the MacBook Pro User Guide here (this is not for the latest MacBook Pro, but the information about the MagSafe adapter is true for the newest model):
    MacBook Pro User Guide
    http://manuals.info.apple.com/en_US/macbook_pro_15inch_late_2011.pdf
    It sounds like you are not getting the amber light indicating your computer is charging, and you are noticing that the battery level is depleting.  I recommend resetting your System Management Controller when something like this is occurring:
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • What are the Windows Experience Index numbers for Windows 7 running on a MacBook Pro 13 Retina Display?

    I am curious to know what speed those running Windows 7 on a MacBook Pro 13" Retina Display are obtaining.  I am interested in purchasing a MacBook Pro 13" Retina (i7) and will be running Windows 7 frequently since some of my business software only runs under Windows.  I have heard that the best PC is a Mac.  Just wanted to confirm the Windows Experience Index values are for those MacBook Pro users are seeing when running Windows 7.  The Windows 7 Experience Index numbers include one for Processor speed, Memory (RAM) speed, Graphics speed, Gaming graphics speed, and Primary Disk speed.

    Hi - I connected my superdrive but it does not seem to be working - now all I get is a black screen with the prompt - no bootable device; insert boot disk and press any key.
    Any thoughts on this? I put an ISO image on my desktop and also created an image on a USB drive - however it has encryption software on it which did not get overwritten so Im not sure if this is why that won't boot.
    Does anyone know if the Superdrive can't be used?
    My macbook is 3 weeks old - it is all the latest and greatest stuff...

Maybe you are looking for

  • IS THERE A WAY TO TRY ADOBE PREMIERE PRO CC "AGAIN"?

    HI I installed Premiere Pro CC  from the cloud... but after that I had 1 hole work week and then went on holidays.  I have not been able to really try it. IS THERE A WAY TO TRY IT "AGAIN"? I have tried to uninstall and reinstall both premiere and the

  • Need help on subform of adobe

    hai everybody,                      I am using subform ui element for creating a table in interactive form.I am able to correctly get the data in rows that i have binded dynamically using datasource property. My problem is in my application i am havi

  • How to get rid of decimals in the formula field?

    Hello, I'm using CR 2008. How to get rid of the decimals in the formula field? I have a field with this formula: "<b>" & ProperCase({DevelopmentTracking_SELECT.GameType}) & "</b>" & "<br><i>" & ProperCase ({DevelopmentTracking_SELECT.CustomerName}) &

  • Display portal report in new window

    In 9.0.2, I have a sql based portal report displayed on my page. I would like to create links that open up a new report in a different browser window. Is this possible? For example: My 1st report lists the Deptno, Deptname in a tabular display. I cre

  • My database does not know of iterators

    I am creating a java class in my database, and I am trying to retrieve multiple rows from a table. In the documentation I find that #sql public iterator IteratorName(String name) creates an iterator with which I can iterate over multiple names from t