MacBook pro with retina won't boot. Dark blue screen on start up. Any thoughts.

my MacBook pro will not boot up. I have no idea what happened to it. It is only a few months old. I have tried safe mode but that doesn't seem to work either.

FIxed

Similar Messages

How to Install Windows 8.1 on MacBook Pro with Retina Display Using Boot Camp?

Hello,
I own a MacBook Pro with Retina Display and was wondering how do I install Windows 8.1 without an optical disc drive? I have bought the full version of Windows 8.1 and would like to partition it on my MacBook Pro. Could someone please help me out by posting step-by-step procedure or a video on how to do it? It is my first time partitioning the Windows operating system and would like to clarify with the community on this before I install it.
Thanks in advance for those who have helped!

Windows 8.1 is not yet supported by Boot Camp. The best way currently to install Windows 8.1 is to use a virtual machine like Parallels, Fusion, or VirtualBox. Installation instructions are on the Parallels, Fusion, and VirtualBox site.

MacBook Pro with retina display (2014) stuck on login screen after latest Yosemite update

Yesterday I ran the latest Yosemite update. The MacBook restarted afterwards, but the login screen won't respond to trackpad or keyboard. The MacBook is fully charged, BTW. I've shut down by holding the power key until it powers off, let it rest, and powered up again. I get the chime and the login screen, but I can't select anything either with trackpad or keyboard.
OH

Sorry folks, this is me again.
NEVER MIND. I closed the lid, opened it, and all is well. I don't know what was going on, but it seems to have resolved itself.

MacBook Pro with Retina display to imac

Hi
Can i connect a MacBook Pro with Retina display to a mid 2010 imac 27" ? in ANY way? to use as a second screen... HDMI to mini display.. ive a feeling i know the answer but its worth asking.....
thanks!

Ha, "their" my teenagers would certainly point that out.
"true to say the imac isn't the most upgrade friendly"
Well it's just taking that front glass and the LCD off. The earlier ones had the hidden latches and the special tool to release it. "Took quite a technique to remove it. I just did one where someone had just broken the latch and glued it back.
"i just replaced the dvd drive, i could never go back to mechanical."
That's for sure. As soon as I put my first SSD in this early 2011 MBP 13" I realized that there was a reason why all the Airs could get buy with just 2 or 4 GB RAM.
"currently budget isn't an issue"
That must be nice.
"this is testament to apple - there is no way a pc would have held up this well,"
Yes, I'm still using a 20" and 2 22" ADC Apple Cinema Monitors on my workbench w/ a 2002 Power Mac MDD G4, a 2011 Mini i5 and a 2006 iMac. There's a working SE and IIfx in the closet.
" initial pain of purchase"
Yup that IIfx originally cost $9,900 in 1990. I got it for half price!
There's a 27" iMac for sale here in the NW. I'm looking at it to replace the Core 2 Duo.
"imac is still a great machine with a georgeous screen"
Yup until last year I administered 88 PCs at a charter school. I found looking at those displays and jittery windows all day long really irritating. Of course I'd try to "2 finger scroll" and use "Gestures" to move to a new desktop until I remembered "Oh right, PC, crap."
Good luck and thanks for the checkmark.

Installing boot camp in a macbook pro with retina

Hello today i tried installing windows in my macbook pro with retina but it doesnt seem to install the drivers correctly.. i couldnt connect to the internet in windows so i looked and these drivers werent installed
Network Controller - Wireless
PCI Simple Communication Controller
SM Bus Controller
High Definition Audio
Apple Keyboard -> Bluetooth USB Host Controller (though the USB ports are active and operational)
Facetime HD Camera (1 of 2 not working)
Also the nvidia grafics werent installed so i couldnt play any games and the whole purpose i want to install windows is for some games and solid works...
I appriciate any help i can get
Thanks

Sounds like you did not download and then install the Windows support/driver software. It is one of the first items in the Boot Camp menu when you start Boot Camp Assistant.

TS3196 i have installed windows 7 on my macbook pro with retina display but the internet won't work in Windows, please help!!

I have the latest 13" Macbook Pro with Retina Display. I just recently installed Windows 7 through Bootcamp assistant but when I am in Windows the internet doesn't work. How can I fix this??

I found where to download it in bootcamp, I just can't find my usb drive I will need to buy a new one and then give it a shot. I am sure I will be back to ask more questions... thanks for your help.

Installing windows 7 on a macbook pro with retina display

Hi All -
I just purchased a new macbook pro with retina display and I want to install a copy of windows 7 on this machine. I've gone through numersous postings online about the proper way to do this - and I had a few questions as it is a little confusing.
What I have:
15" macbookpro with retina display
External superdrive
Physical copy of windows 7 64 bit
a burned image of the windows 7 disk (as a .CDR file)
Several postings have indicated that I need a flash drive; is this the case if I have the actual disk and the superdrive I can use for reading it?
If not and I do in fact need a flash drive - I have an 8gb with encryption software on it - if I need to make an autoboot for the windows .cdr is there a special way to do this or will the .cdr image work as it is?
I appreciate any help provided.
Thank you
Lenny

Hi - I connected my superdrive but it does not seem to be working - now all I get is a black screen with the prompt - no bootable device; insert boot disk and press any key.
Any thoughts on this? I put an ISO image on my desktop and also created an image on a USB drive - however it has encryption software on it which did not get overwritten so Im not sure if this is why that won't boot.
Does anyone know if the Superdrive can't be used?
My macbook is 3 weeks old - it is all the latest and greatest stuff...

Macbook Pro with Retina wont detect monitor on mini display port to dual-link dvi adapter

So after reading Jeff Atwood's post, I decided to jump and give it a shot. So this week I got my monitor in from Korea, and I already had my Apple mini display port to dual-link dvi adapter, hooked everything up - and nothing. Monitor doesnt show a signal, and no display shows up in user preferences.
To verify the monitor actually works, i plugged it into my windows box - and boom, right away there it is in all its glory. So I called apple support, after spending about an hour going through the "are you sure its plugged in stuff", the tech finally admitted to being stumped and blamed the adapter. Not to be deterred, I then went to my local apple store and talked them into trying their adapter to rule out the adapter - regardless of the adapter, the mbp wont detect the monitor.
Just for fun, i tried my old single mini displayport to single dvi, the monitor is recognized, but that obviously cant drive the right resolution, so i just get a backlight. Same deal when i try the hdmi port with a hdmi to dual-link dvi adapter on the end of it. Also tried display port to the same hdmi with adapter on it (the joys of working in a dev shop - cables to test everywhere)
I have read / tried a ton of things:
re-installed / uninstalled air display, just to be sure it was gone. went through all my apps just to see if there is anything like this i could think would be effecting it
install gfxCardStatus to ensure i am on the nvidia (discrete) and not the internal card
Played with different settings on SwitchResX to try to force the res over hdmi - no love - os rejected each one
I bought the monoprice adapter wondering if it was just the apple adapter since the apple adapter has been panned, no love from it either
Reset the PRAM countless times
I have two other adapters coming in to test with in a day or two - maybe one of those will be magic, but at this point i kinda think its software on the mac. My Spec:
I am running Mountain Lion with all the latest updates
New MBP with Retina (2.6g processor, 16gig ram, nvidia video card)
Here is the ebay link to the monitor
Now the other weird thing is pretty much universally these auctions say the monitors cant be run on a laptop - which makes no sense to me, because its just a connection, if the video card is strong enough (which my machine better be) it shouldnt matter the source. The listing mentions its a "by-pass" monitor, which is something I and google have never heard of.
So any sage words to make my day?

Magic was, I have to have the adpter plugged into the mac, let it recognize all with the monitor powered off.
then power on the monitor, and boom gloriousness
For future generations, setup that works:
1) MacBook Pro with Retina
2) Monitor From Korea (example auction)
3) Accell Mini DisplayPort to Dual-Link DVI Active adapter (amazon)
4) Boot mac, plug in adapter, let it recognize the monitor, power on monitor

I have only loaded phone contacts in my new iPhone 5 and my email contacts only on my Macbook Pro with retina display contacts how can I keep them from changing my iPhone to email contacts only when I connect to iTunes please

Since purchasing a new iPhone 5 and macbook pro with retina display I have decided to keep the iPhone 5 for phone contacts only, and the macbook for email contacts only .. Is there a way for me to keep these as they are recorded on each apple product when I sync with iTunes as it has changed my iPhone and put in email contacts and thus deleted iPhone phone contacts once when I syncd thanks appreciate any help

To prevent your iPhone from automatically syncing when you plug it in, click on iTunes in the menu bar, then preferences, then "devices", then tick "prevent iPhones, iPad's and iPod's from syncing automatically".
Plug it in, then on the iPhone sync summary screen, click "info" along the top.
Make sure the "sync contacts" option is not ticked. as long as it's not ticked, then it won't sync with your mac's contacts but will still include them in backups.
Also, if you use iCloud, make sure that the iPhone/mac are either not signed into the same account, or that "contacts" is not turned on for both of them

On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
"USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
I unplugged the device and the message still keeps coming up.
This is what I have done so far to troubleshoot:
I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
1. Reinstalled OSX
2. Restore the last known good Time Machine Backup.
This did not fix my issue, so I called Apple Support and they told me this:
1. Turn Power off.
2. Wait 15 seconds.
3. Plug in Magsafe adapter.
4. Wait 15 seconds.
5. Hold down the Shift+Option+Power Button for 20-30 seconds.
6. Turn Power back on.
Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

Windows XP on macbook pro with retina display?

I am going to be helping a client with putting Windows XP on a brand new Macbook Pro with retina display later this week.
This client has two programs that are XP-specific, and MUST be run by booting XP fully and not virtually with Parallels or other options.
So we are going to be using bootcamp.
We have the XP install disc, and an external USB CD/DVD drive from Apple.
I've found postings online about people installing more recent flavors of Windows (Vista, 7, etc) on these machines
but I haven't found anything about Windows XP on the MBPro with retina display.
Anyone have any tips to share?
This should still be possible and not a big problem, right?
Yes, I know the resolution will likely be the biggest issue, but it should still install and run, yes?
Thank you for any helpful info anyone can provide.

First off there are no programs that are XP specific and no programs, that I know of or ever heard of, that can not run in XP in a virtual machine.
Most all programs that will run on XP will run on Win 7, unless they are older programs. Those older program that will run on XP and not on Vista or 7 will also run on Win 2000 or 98SE. So as stated before I don't know of any programs that will only run on XP and no other operating system.
A Virtual Machine is Just That, IE a set of Virtual hardware. The Operating system has No Idea it is running in a Virtual Machine on top of a Host operating system. They are completely separate except for the VM using some of the physical hadware in the host computer. Like the USB ports, the network interfaces and the CD/DVD drive. And the VM software is made to allow those devices to look like they are part of a Physical computer the VM OS is running on.
So I have not idea what these programs could be that would not run on/in a Virtual Machine with XP Installed.
Please let me know for future reference.
So your options are.
1) Install a Virtual Machine software program. VMware Fusion, Parallels or Virtualbox. Then install Win XP into a Virtual Machine.
2) Buy and older Windows computer that will run XP natively. It doesn't need to be that old, 3-4 years old will do as most all major PC manufacturers have XP drivers for their 3-4 year old computers and most if not all hardware manufacturers, Vid cards, Ethernet & WiFi cards, still list drivers for XP.

How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

There's not much sense in purchasing a Mac to run only Windows on it. Keep in mind that drivers for Windows are a secondary concern for Apple. While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows). You will also not be able to install firmware updates. Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific. You must be running OS X in order to install a firmware update. You can do this even if you boot off of an external drive with OS X installed on it. At the very least, you should keep just a small partition for OS X on your internal drive.

Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

Installing Windows XP on a new MacBook Pro with Retina Display.

I just purchased a new MacBook Pro with Retina display and need to install Windows XP on it so that I may run 3 Windows programs. I have watched a few videos on the internet on how to do this through Boot Camp Assistant, and it says at one point to use the driver CD from Mac to install the drivers. I did not get any CD's with my new MacBook Pro. I also saw on some of these boards that said Boot Camp does not support Windows XP. The people at the Apple store said it can run Windows XP, so I have ordered an original version.
Question 1. Does my MacBook Pro with Retina Display running OS X version 10.8.3 able to run Windows XP?
Question 2. How do I install the drivers?

Would this work? And also, what is the VM I need? Where do I get it?
Microsoft Windows XP Pro - The Professional Choice
Although replaced by Microsoft Windows Vista, Microsoft Windows XP Pro remains the most popular and widely used operating system in the world for business computer applications. While Microsoft Windows Vista does offer some cosmetic improvements and a few new features, nothing can beat Microsoft Windows XP when is comes to performance, stability and, in the case of older computers, speed.
Windows XP Professional delivers a reliable foundation you can count on to keep your computer up and running when you need it most. Not only the operating system is more reliable, it also offers features that make it much faster and easier to recover from system problems. Windows XP Professional, the new standard in reliability and performance, is designed for businesses of all sizes, and for individuals who demand the most from their computing experience. With the ultimate communication and collaboration tools, advanced laptop support, remote access capabilities, and more, Windows XP Professional helps you be more productive. Prepare yourself for the most reliable, secure, and responsive Windows yet. Windows XP Professional gives you the freedom to focus on your business and your customers.
Package Includes:
Coa Sticker Activation Key
DVD Disk
This software is 100% genuine and will validate with Microsoft. The software is new sealed OEM.
System Requirements:
AMD Athlon 64, AMD Opteron, Intel Xeon with Intel EM64T support, Intel Pentium 4 with Intel EM64T support CPUs, Core2Duo, Core2Quad, Intel I7
256 MB of RAM
1.5 GB of available hard disk space
Super VGA (800 x 600) or higher-resolution video adapter and monitor
CD-ROM or DVD drive
Keyboard and Microsoft Mouse or compatible pointing device
64-bit Device Drivers
Package Includes: A genuine COA, genuine software cd with Dell brand logo and Product Key for activation. Although this product has the Dell brand on the CD, the software installs as a full version on any system and will activate with Microsoft. This is a Full OEM Version for a clean installation. This is the full product and will load on computers that do not currently have Windows. Or, if the computer already has Windows, this version will install over your previous version and delete all files to become a brand new clean version. This product includes the Microsoft CD and Activation Product Key with COA. Boxes and manuals are not included. The manual is on the genuine disk.
Model: ZAT-00124
Manufactured by: Microsoft

How to Clone Hard Drive from Macbook Pro to Macbook Pro with Retina

Hey everyone! I had a question about cloning my laptop's hard drive. I was considering buying a MBP with Retina, but was wondering how I would accomplish copying over my current hard drive to the retina, as I know you can't take out the retina's hard drive, and it is flash. Any suggestions?

Connect the two with a Firewire cable if they both have Firewire ports (or use Thunderbolt if the both have Thunderbolt ports.) Boot the new computer into Target Disk Mode and the old computer normally. The new computer's disk drive should appear on the Desktop of the old computer.
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it to the Destination
entry field.
5. Select the source volume from the left side list and drag it to the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the new computer's drive Source means the old computer's drive.
Be sure the old computer is running a version of Mountain Lion that is later than the version installed on the new computer. After cloning you will probably need to run the new 10.8.2 updater for the new computer. OS X Mountain Lion 10.8.2 Update for 13" Macbook Pro with Retina Display, 21.5" iMac (Late 2012), Mac mini (Late 2012).

MacBook pro with retina won't boot. Dark blue screen on start up. Any thoughts.

Similar Messages

Maybe you are looking for