Macbook Pro won't boot. Need to copy files off of it.

Ok, so all I need to do is get some kind of program that I can put on a flash drive, boot off of it, and access the files on my Macbook. I my only other computer is running Windows 7.
My Mac isn't booting and I just want the files off of it. I've spent hours trying different programs and it's really difficult because most of them require that you have a mac to either convert isos, install to a flash drive, or even decompile.
I've tried Slax, but I can't figure out how to access the hard disk. I've read lots online about this and it seems to have problem with Mac disks.

jlexen,
if your friend no longer has those grey installation DVDs, he can purchase a replacement pair from Apple. One of the discs has its original bootable version of OS X, and the other one has its Apple Hardware Test and its iLife apps. They’re worth having around in case of hardware trouble.
In the interim, this old post might help with being able to use Slax to get access to those files, though I wonder if “CONFIG_EFI_PARITION” is a misspelling of “CONFIG_EFI_PARTITION” — I haven’t used Slax myself, so it’s certainly possible that the information in that post might no longer apply.

Similar Messages

Macbook Pro won't boot mac osx and files are not backed up!

I have a macbook pro 13" (mid-2010) model. I upgraded the HDD from a 500 GB to a 1TB and the RAM from 4GB to 8GB.
From when I upgraded the laptop till about a week ago, it was working fine - I partitioned the 1 TB into 2 parts using bootcamp I installed windows 7 operating system and on the other part I have snow leopard. Since lion osx and mountain lion osx were released i updated my mac os.
Basically the problem is that I was recently watching a movie on my laptop and then all of a sudden it was stuck and I decided to restart my computer by doing a forced shut down and from then on my mac os stopped working - it would always go to the white apple screen and then would not start. I then went into disk utility and it said that the mac hdd partition is damaged and could not be repaired and that I should start backing up as much data as I could.
Since I upgraded the hardware myself - the warranty that covers the computer is basically nulled. Please help I need to back up my files and repair my HDD. I am more concerned with backing up and saving all my data and I am willing to replace and buy a new HDD if necessary!
oh and one more thing the windows part of my HDD is still accesible which means that the HDD itself is not fully damaged.
If anyone can help me - I would appreciate it!

Since I upgraded the hardware myself - the warranty that covers the computer is basically nulled.
Warranty is not made void by upgrading memory or storage. If you have AppleCare then you should be fine.
Disk Utility is powerful, but not the most powerful tool out there. There might be other applications (sometimes expensive) that can fix the volume. If your Windows partition works but not the Mac partiiton that leads me to believe the issue is solvable.
Can you read the Mac files from your Windows partition?

MacBook Pro won't boot, need urgent help.

Okay, let's get the full back story on the computer. I bought it in March 2007, I had a strange light column on my display so I took it into Apple in October to get it fixed along with an issue I was having with AirPort Express, so the computer comes back and they replaced just about everything logic board, display, keyboard / top case of the laptop.. the only thing I don't think they replaced was the hard drive and the bottom part of the case.
March 2008 rolls by and my AppleCare expires. April comes and my computer begins doing this thing where 6-8 hours of use it just "freezes" the mouse still moves and you can still click for a few moments but then it just goes stops doing everything except mouse movement, try to reboot and it makes the chime and just shows the white screen and refuses to work the rest of the day, the next day it always does the same thing. Then the time became shorter, 4 hours, 2 hours, 30 minutes. I was at school at the time and didn't care to mess with it so I just stored it away.
A month later I come back, turn it back on boots up perfectly within 30 seconds and works fine for an hour then repeats the previous crash like symptoms. I ask my computer friends and they suggest it's a dying hard drive - so I send that in to get replaced and pay out of my pocket. No luck. Then my friend points out that while it won't actually boot to CD if you hold "C" on boot up, if there isn't a CD there it detects that and shows the correct error... meaning the CD app just isn't loading on the RAM. Fine... I paid for a new RAM stick. Boots up, immediately crashes.
Boot command results:
Flash P-RAM: works and sometimes allows boot.
cmd-S: never works
cmd-V: never works
C: worked right after I replaced the harddrive, hasn't worked since.
T: starts in target disk mode, don't have a second computer to see if drive is browsable.
Any ideas? Is it the Logic Board? Will Apple cover it since they recently replaced it or no? How much will it cost to get a new one?

1) I already said that and I'm not complaining that it's Apple's fault, I'm trying to fix it so I can have a working computer.
2) I'll trust people that work in IT over the pompous "omg-i-got-the-job-so-all-my-friends-will-think-im-in-the-know-on-the-iphone" high schoolers Apple hires at the local Apple store. One told me that Firefox wasn't an approved web browser when I last took it in because the Airport Express card was crap. Hence why I'm asking here where people have actually seen this problem before and recognize the symptoms instead of some kid to read from a script of troubleshooting and then charge me $120 to send it to a tech and get it checked out.
I took it to ProMac my local Apple Authorized Service Provider (AASP)of people who have been working with Macs for the last 15 years, and for $50 they're going to look at it and tell me what they think tomorrow, I'll post the results for anyone else having similar issues.

Macbook pro won't boot, stuck on white apple screen

Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
I've powered down and tried to boot up several times.
I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.

Exacty what happens when you try to boot up from the disc that came with your computer? Are you holding down the c key? Have you tried holding down the "option key?" Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you.

MacBook pro won't boot up Keeps turning off

MacBook pro won't boot up. When power button pressed the white screen w apple comes on w progress bar but shuts off before bar completed. If I move cursor or hit buttons it boots but will turn off if cursor stops Moving or stop pushing buttons. Just started happening. Ran hardware test and all shows ok. Any ideas??

Thanks for all the help; however, I still continue to have problems booting off of any other media.
I've tried the Apple CD w/ no success - I made an image of the apple cd and restored it to a USB drive, and it won't boot. I've tested both methods on another mac, and both options boot fine.
I'm going with my last restort here and am going to install OSX on a portable USB HD, and try to boot off of that (no clue if it will work given the outcomes of the other things I have tried). From there I'm going to backup the HD, and try DW as suggested.
Any thoughts as to why the mac refuses to boot off of any other media? It always boots halfway and then tells me I need to shutdown my mac.
Thanks again,

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

My 2007 MacBook pro won't boot up beyond a White screen any ideas what to do?

My 2007 MacBook pro won't boot up beyond a White screen any ideas what to do?

Odd how this hasn't been archived yet.
I'm getting the same thing with my Macbook, but can't boot past the white screen. An Apple store in KS suggested I needed a new hard drive, but I've already put two in there and it's still doing the same thing. I really don't want to buy another motherboard like I had to a couple of years ago.
My choices are either buy a cheap drive to boot from and remove the current one to put into an external case, or save the money by not buying a new motherboard and putting it as a down payment toward a Mac mini.

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

Read this article...
http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US

Macbook pro won't boot - how do I retrieve emails?

Hey guys
I've got a common problem that my Macbook pro won't boot. Sometimes I get stuck on the grey screen with spinning wheel, sometimes on the blue screen with spinning wheel
I've scoured the internet on another machine and tried every trick I can find with the MacBook Pro including
Disk / Permissions repair from install disk (says the HD is fine)
PRAM
Single User
Soft
It seems like my only option at the moment is an Install and Archive. I can mount the MacBook Pro on another machine with a firewire and remove files and backed up a lot on a hard drive before it died
What I am worried about is how to retrieve some emails from the machine that only exist locally because I have deleted them from the server
Is there a way of doing that?
Would Migration Assistant work?
If anyone could help me with this or suggest any other methods for bring my machine out of a coma I'd really appreciate it
d

Try a different adapter. If you don't have access to a known-good adapter any other way, make a Genius Bar appointment at an Apple Store.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

My daughter's MacBook Pro was doing exactly the same thing. I don't know if it had anything to do with the latest update. She called me about a week ago saying that her MacBook began running slower by the day . She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning. I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive. She took it to the Apple store. Originally, they also thought it was the hard drive. It ended up being a corrupted operating system (Lion). Apple genius simply re-installed Lion and she's back up and running. Good thing she backed up right before it crapped out. She'll be restoring everything tonight. Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

My MacBook Pro won't boot and apparently my HDD is locked

My MacBook Pro won't boot up. And it's says my HDD is locked when i try and reinstall OS. Help me please good people.

you want to check how many threads with same question first, and look in
Mac OS version forum that you have; and the notebook MacBook instead of the workstation forum for Mac Pro (non-laptop)
Not a lot of detail to go by with "won't boot" though.
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Troubleshooting: My computer won't turn on
https://support.apple.com/kb/TS1367
Assume you know what your OS, how to use the Recovery Mode, and how to repair or do Safe boot and other tasks.
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Identifying resource hogs and other tips: Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems: Apple Hardware Test
General Mac maintenance: Tips to keep your Mac in top form
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

MacBook Pro won't play .mov or .wmv files.

Since "upgrading" to Lion my MacBook Pro won't play .mov or .wmv files, all I get is a black screen and the audio. It's so frustrating!!
I've read many other posts all along the same lines and wherever possible I've tried to follow the advice which has been given but nothing works.    I've updated all the drivers I can and I've even reinstalled Lion, nothing makes a difference.
I'm not really looking for any more advice, all I want is someone from Apple to read these posts, realise there is problem and get working on a fix or update.
I had no problems when running Snow Leopard and it would seem, looking at everyone else's problems, that the common issue is Lion.   Seriously, this is one area where Lion is a backwards step.   It should just work (like most things from Apple), but it doesn't.
Personally I believe there is a problem with Lion but from what I've found out from speaking to friends with other Apple kit, this might be a random issue only affecting some people as some have said they've had no problems while others have had the same issues as me.    One guy reinstalled Lion and it resolved the issue for him, I've not been as lucky.
As I say, I'm not really looking for more advice, simply some sort of update from Apple to fix it.   PLEASE!!!

I'm not really looking for any more advice, all I want is someone from Apple to read these posts, realise there is problem and get working on a fix or update... As I say, I'm not really looking for more advice, simply some sort of update from Apple to fix it.   PLEASE!!!
This is a peer-to-peer user forum. Perhaps you would see more action if you and others would file a formal "Bug" report with Apple QuickTime technical people rather than repeatedly reporting a possible problematic problem which may or may not affect others on a random basis. QUICKTIME PRODUCT FEEDBACK
Since you aren't seeking further advice here is what I have observed. Not being a regular WMV file user, I had to create my own sample file to test—a WMV 9 file containing WMV3 compressed video and WMA2 compressed audio. Since I normally use QT 7 as my primary media player, I also stored the WMV data in its partially decompressed form in an MOV file container to avoid pre-playback delays in "classic" player routines and also provide a secondary playback test of MOV wrapped content. These files play as follows using the Flip4Mac component/player support and uncoded URL uploads:
QT 7.6.6 "Open File" - both files play correctly.
QT 7.6.6 "Open URL" - both files play correctly.
QT X.1 "Open File" - WMV file plays correctly. MOV file plays video without audio.
QT X.1 "Open Location" - WMV file appears to open but plays with "black" screen and no audio. MOV file plays video without audio.
VLC "Open File" - WMV plays correctly. MOV file doesn't open,
VLC "Open URL" - WMV file plays correctly. MOV file appears to open but nothing plays.
MPEG Streamclip "Open File" - both files play correctly.
MPEG Streamclip "Open URL" - both files play correctly.
GarageBand - WMV file will not import but MOV file does.
iTunes - WMV file will not import. MOV file container is accepted but as soon as iTuness sees the compression formats, it aborts import.
Safari - WMV file URL auto-downloads and playes in the QT X.1 Player. The MOV file URL opens and plays in Safari.
As you can see from these results the files do play but are subject to many different constrints based on old/new video technology support, independent QT subsets and/or container trapping constraints. In short, individual user results will depend on presence/absence of component support, actual compression formats, file container, application being used, and how the application is being used. Unfortunately, most users here can't or won't provide the prerequisite information or a sample file for independent examination. This makes it next to impossible to give advice in these matters or categorize the specific nature of the problem.
SAMPLE WMV FILE
SAMPLE MOV FILE

MacBook Pro won't boot up. HELP!!! Need this computer for work tomorrow!!

My MacBook Pro will not boot. I was using it fine one minute, closed the lid to walk downstairs. Opened the lid and there was nothing. Tried to reboot it ... no chime with a black screen... nothing. Battery is working and fully charged. Tried using the power plug as well.

There are many comments about the NVIDIA GPU issue and Apple not replacing the GPU. I will say I had good success in getting Apple to replace mine in my Macbook Pro. When my computer suddenly would not fully turn on, I researched the issue to find out the possible reasons and then somewhat dawdled in taking it in. It was 2 weeks past the 4-year GPU warranty window. But I had had problems for some time preceding when it wouldn't fully turn on, such as geo designs appearing on the screen and the screen going dark, and those issues did occur at least a month or more before my warranty ended. I had no idea what those issues meant and simply ignored them until the computer wouldn't fully turn on.
The good folks at The Apple store in Austin initially said no luck; yes it's the GPU but it's two weeks past the warranty. But then they kindly relented because clearly the symptoms I described to them that occurred during the warranty were caused by the faulty GPU. How would I know this was the issue? They replaced the logic board at no cost. I've seen comments here that a Genius said the problem was the logic board, not the GPU, and therefore Apple would not make the repair. I was told by my Genius that the GPU is part of the logic board, and therefore the logic board needed replacing. This was a $526 repair that I was grateful Apple took care of. I would not have made the repair and would have gone out and bought a new non-Apple computer with a warranty.
When I got my computer back, I checked it before I left the Apple store and it was running slow. I ended up paying Apple to replace the hard drive, so ultimately I did pay for an Apple repair. But I'm a happy rather than disappointed Apple customer because of the free GPU repair. Happy, devoted customers has made Apple a great company, and it should be worth it to the company to fix the faulty GPUs that are close to warranty to keep customers and keep them happy.

My Macbook Pro won't boot up, only in safe mode!

Help, my macbook pro won't restart, only in safe mode! and it seems that safe mode has plenty of implications for use. my usb memory stick doesn't seem to be recognized while in safe mode. I was doing a cleanup on mackeeper just after I downloaded a trial version of microsoft office mac. The trial wouldn't work properly so I deleted it and decided to do a cleanup with mackeeper. than the mac froze while mackeeper was doing it's cleanup and the screen flashed black a few times. Ever since it won't boot up unless I use safe mode. Also, I downloaded the most recent updates while in safe mode but it doesn't seem to be recognizing that I already downloaded them because software update is still telling me that I have 6 updates. So I am horribly confused at this point. Please help, I need this laptop to do report cards (it's a good thing I got an extension). thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
You can then quit Terminal.

Macbook Pro won't boot or show partition

I have my macbook pro partitioned with leopard and tiger (for protools) . I also have a copy of leopard on an external hard drive that I boot to occasionally. While on this external drive I had to do a manual shutdown after it froze and now my macbook pro won't show the internal drive partition with leopard on it. It will only boot to the internal partition with tiger on it. Even though I can see the leopard partition on the desktop and access it through tiger it is still not showing up in startup disk. I held the option key during startup and it gave me the choice to choose the leopard partition but after it started to go through booting it would then shut down.
Any suggestions?
I ran disk permissions and repair but its said everything is okay.

I would try Diskwarrior 4.1 and see if that can repair the drive.
btw how did you get Tiger on your Macbook Pro?
My Tiger install DVD will not install on my Macbook pro even though it is a 3.1 version machine.
I need to run Protools as well.

Macbook Pro won't boot

Hello all and thanks in advance
History:
I have a 2010 Macbook Pro. One day I was copying some files and it froze indefinitely. I turned it back on and I got the Grey screen with the question mark file. I put a system restore disc in and opened the disk utility. Strangely, my hard drive (plugged in) did not show up in the menu. I took the hard drive out and took all my important files out onto my iMac. The iMac recognized the hard drive but the Macbook did not. I attempted a system restore for my hard drive and when it was done, it likely restarted and then It went to the beggining of the system restore process again. I shut down the computer because I did not want to do another system restore.
When I turned it back on - the iMac would not get past the apple logo with the spinning wheel. I turned the iMac back on and chose my MacBook hard drive by holding option at startup. The hard drive managed to boot but the system restore did not work, all of my original files were still there. I did the same thing with the iMac harddrive and that also booted. When on my iMac hard drive I went to disk utility and verified disk for my MacBook Hard Drive. It needed repairs, so I repaired it, and it no longer needs repairs.
I plugged the MacBook Pro hard drive into a few windows computers to try to get it to show up but it didn't (Because it's windows DUH) But I just wonder if that caused any issues.
Problem 1:
Now, the iMac goes to a white screen when it turns on and the only way to boot is to hold option and select the Hard Drive (I checked and it does not need repairs in disk Utility)
How can I make my iMac work without holding option at startup?
Problem 2:
When I put my MacBook Hard Drive back into my MacBook. My Macbook only turns on for a few seconds and then shuts off, tries to turn on again, and then shuts off in a loop. The Monitor does not turn on AT ALL. The white flashing lite on the front side of the macbook case goes on for the duration of the startup attempt. The Hard Drive is getting power as well as the fan. I am unsure about the other parts.
What is the issue with my MacBook? Any clues?
Notes:
I also recently got a new charger (60W) and it was for MACBOOK not MACBOOK PRO. I heard this may also cause the battery to die (permanently). However, when I click on the battery indicator on the side of the MacBook, it gives me five green dots.
On the first try to start up, I hear two beeps (unsure if they are from the speakers or the hardware). I know that that is supposed to mean RAM incompatible but the RAM I am using is the RAM that came with. I did remove and reinstall the RAM twice and it still beeps twice (sometimes once).
I have attempted holding option at startup. Holding C at startup (A system restore disc is still in there) and the power doesn't stay on long enough to do anything.
The MacBook has been without its back case for about two weeks now so I hope that didn't break anything.
The Power doesn't remain on long enough to do PRAM or SRC Resets. At least I think so, please correct me if you think I can reset these before the power shuts off (5 or 6 seconds)
P.S. I am okay with turning it into to the Apple Store or Geek Squad or whatever, I just want your opinions first because I honestly trust the internet more than Geek Squad. If you could pin it down to a specific hardware or something that would be GREAT.
THANK YOU! Sorry for the length

I just tried booting the computer, and it BOOTED! I even got to play a little music and start a web browser before the screen went blank and the music stopped abruptly. I think I heard the disk shutting down as well while the keyboard light was still on.
Now it wont boot again.

Macbook Pro won't boot. Need to copy files off of it.

Similar Messages

Maybe you are looking for