MacBook Pro won't boot up after interruption of update

I interrupted the installation for the OS X Mountain Lion v10.8.2 and now my MacBook Pro will not boot up. Any suggestions besides calling Apple support or going to the store?

Hi,
I am having the same problem with my Macbook Pro. Did you manage to find a solution to this problem?

Similar Messages

Macbook pro won't boot up after installing a Micro Trend security.

Macbook pro 13" unibody non-retina won't boot up after installing a Micro Trend security.
Please Help Thanks!

Boot to safe mode and uninstall Micro Trend from there.
http://esupport.trendmicro.co.jp/Pages/JP-2075680.aspx

MacBook Pro won't boot up after updating to Lion

I just updated my MacBook Pro to Lion. After install restart the computer is stuck on the white screen with the apple logo and spinning wheel. I manually restarted it after 1 hour but that didn't solve the issue. What do I do? Any advice would be greatly appriciated.

That sounds like the case. Good Luck.
check this link:
http://lmgtfy.com/?q=Lion+boot+disk
there is a ton of information, step by step. I am sure there is probably something here in these forumns on creating the boot disk.
Again I would start with a clean install of Lion off of the boot disk you create.
FYI I started with Snow Leopard time machine backups updated, then cloned my existing drive to a FW drive before installing. During the work day and in IT, It was a savior to target boot from the firewire drive to address employee needs when I was having Lion lock up issues from the initial install.
Wipe and install clean so far so good. No lock ups. And USB flash install was super fast. Then brought my apps over, or re-installed. This way everything was clean.
HTH and GL
Message was edited by: cpguru21
sometimes I cant spell :-/

MacBook Pro won't boot up after Lion upgrade

I upgraded my 13" macbook pro to lion last night. I watched some movies until the battiery died. Now it won't boot up. Indicator light does not come on and it makes no noise. Battery indicator says it's full. Any suggestions?

MBP's are very finicky about RAM. Most of us here will recommend Crucial or OWC as the best source. If I were you I'd put the original RAM back in and see if the problem goes away. If so, return what you just bought and buy from one of the vendors I mentioned.

Macbook Pro won't boot OSX after Yosemite upgrade 10.10.3

I downloaded the update to 10.10.3 this morning before driving my daughter to daycare. When I came back, my Macbook Pro had rebooted into Windows 7 (Boot Camp). I restarted it by telling it to reboot to OSX, but it boots Windows again. If I turn it off completely, and then turn it on again, there's no chime... just a black screen for about 30 seconds, followed by "Starting Windows". I'm about to reboot to try resetting NVRAM and SMC, but I don't know if that's going to work without the chime...
I really need OSX to get going, so any help appreciated.

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

My MacBook Pro won't turn on after the new update.

I left my MacBook Pro out and open for it to update and install the new software. When it finished, I connected my iPhone 5s with the laptop via the USB cable. And it completely shut down. And it won't turn on, restart, nor charge.

Did you try this?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

MacBook Pro won't turn on after installing system updates

So my little "system update" reminder kept bouncing at me last night so I wnt ahead and told it to install updates and went to sleep only to find, my beloved MBP will not turn on this morning.
If I hold the power button, it surely SOUNDS as if it wants to turn on, but the second I let go...nothing, zip, nada.
Any suggestions?

Not the right time to update and go to sleep. What updates? How much free space was on the hard drive?
Try inserting the OS installer disk in the optical drive and powering up holding down the c key.

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

My daughter's MacBook Pro was doing exactly the same thing. I don't know if it had anything to do with the latest update. She called me about a week ago saying that her MacBook began running slower by the day . She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning. I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive. She took it to the Apple store. Originally, they also thought it was the hard drive. It ended up being a corrupted operating system (Lion). Apple genius simply re-installed Lion and she's back up and running. Good thing she backed up right before it crapped out. She'll be restoring everything tonight. Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

Macbook pro won't boot, stuck on white apple screen

Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
I've powered down and tried to boot up several times.
I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.

Exacty what happens when you try to boot up from the disc that came with your computer? Are you holding down the c key? Have you tried holding down the "option key?" Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you.

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

Read this article...
http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US

Macbook pro won't boot - how do I retrieve emails?

Hey guys
I've got a common problem that my Macbook pro won't boot. Sometimes I get stuck on the grey screen with spinning wheel, sometimes on the blue screen with spinning wheel
I've scoured the internet on another machine and tried every trick I can find with the MacBook Pro including
Disk / Permissions repair from install disk (says the HD is fine)
PRAM
Single User
Soft
It seems like my only option at the moment is an Install and Archive. I can mount the MacBook Pro on another machine with a firewire and remove files and backed up a lot on a hard drive before it died
What I am worried about is how to retrieve some emails from the machine that only exist locally because I have deleted them from the server
Is there a way of doing that?
Would Migration Assistant work?
If anyone could help me with this or suggest any other methods for bring my machine out of a coma I'd really appreciate it
d

Try a different adapter. If you don't have access to a known-good adapter any other way, make a Genius Bar appointment at an Apple Store.

MacBook pro won't boot up Keeps turning off

MacBook pro won't boot up. When power button pressed the white screen w apple comes on w progress bar but shuts off before bar completed. If I move cursor or hit buttons it boots but will turn off if cursor stops Moving or stop pushing buttons. Just started happening. Ran hardware test and all shows ok. Any ideas??

Thanks for all the help; however, I still continue to have problems booting off of any other media.
I've tried the Apple CD w/ no success - I made an image of the apple cd and restored it to a USB drive, and it won't boot. I've tested both methods on another mac, and both options boot fine.
I'm going with my last restort here and am going to install OSX on a portable USB HD, and try to boot off of that (no clue if it will work given the outcomes of the other things I have tried). From there I'm going to backup the HD, and try DW as suggested.
Any thoughts as to why the mac refuses to boot off of any other media? It always boots halfway and then tells me I need to shutdown my mac.
Thanks again,

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

Try resetting the SMC.
Barry

My 2007 MacBook pro won't boot up beyond a White screen any ideas what to do?

My 2007 MacBook pro won't boot up beyond a White screen any ideas what to do?

Odd how this hasn't been archived yet.
I'm getting the same thing with my Macbook, but can't boot past the white screen. An Apple store in KS suggested I needed a new hard drive, but I've already put two in there and it's still doing the same thing. I really don't want to buy another motherboard like I had to a couple of years ago.
My choices are either buy a cheap drive to boot from and remove the current one to put into an external case, or save the money by not buying a new motherboard and putting it as a down payment toward a Mac mini.

MacBook Pro won't boot up after interruption of update

Similar Messages

Maybe you are looking for