MacBook Pro won't communicate with wireless HP6500 printer

My MacBook Pro late 2011 will not communicate with my HP6500 Officejet all-in-one. I have tried everything imaginable to fix the problem. My iPad mini works wonderfully with the same printer.

Hi there sailor ricky,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
-Griff W.

Similar Messages

TS1627 iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

Just got a new iPhone 5 and now iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

Hi Jetjuice!
I have an article that can help you troubleshoot this issue a little further and can provide you with some more steps to take in attempting to resolve this issue:
Sync Services: Advanced troubleshooting for contact and calendar syncing
http://support.apple.com/kb/ts2481
That article has an extensive list of steps to perform in attempting to get the calendar to sync again, and those steps should help you resolve the issue. Thanks for using the Apple Support Communities!
Cheers,
Braden

MacBook Pro won't sync with other devices

My MacBook pro won't sync with other devices in the house. My iPad and iPhone sync OK but MacBook won't for some reason. Can you help?

Sign into your account in iTunes - from that page you should be able to deauthorise ALL 5 authorised computers - supposedly you can do this once a year.
Thereafter any devices you no longer have will be deauthorised, and you can reauthorise those you still have or are new.
AC

Macbook Pro won't boot with external HDD plugged

I have a weird problem. My late 2008 Macbook Pro won't start with external HDD plugged either FW or USB... The screen stays white until I unplug it and then the Apple logo is there.
Anyone know any solution for this? Or anyone have the same problem

yeah I had the exact same issue with one of my 750GB externals too. I just left it for a while (about an hour or so) and it was fine..
I believe its so slow because the system is indexing the drive, which can be a very slow process if the drive is big, has a complex folder-hierarchy, and/or is fragmented.
Does the hard-drive appear quite quickly in Finder once OS X has started up? if its slow it may confirm what I've just said.

Calendar on Macbook Pro won't synch with iCloud

Calendar on my Macbook Pro won't synch with the Calendar on iCloud. I tried a number of times to delete Calendar from iCloud in System Preferences then restart the laptop. I also switched the 'enable' function on and off in Calendar Preferences. I restarted after every attempt and also refreshed. It looks as if it's updating but then nothing happens and the triangular, exclamation mark appears, grayed out, next to the iCloud icon in Calendar. I saw an answer in the Apple Support troubleshooting section regarding this about the server having to access port 80 or 443. Could this be the problem and if so then how would I make any port accessible to the relevant server? I'm not having this problem with my other devices or computer.

Hello Wateru,
Thank you for providing the details of the calendar issue you are experiencing with your MacBook Pro. You have taken some really good troubleshooting steps already. I recommend continuing with the steps in the sections titled "General troubleshooting" and "Troubleshooting on OS X" in the following article:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

My Macbook pro won't sync with my iPad. It says it isn't authorised. I have gone as far as deauthorizing all computers then authorizing the Macbook & still no luck. Any ideas?

My Macbook pro won't sync with my iPad. It says it isn't authorised. I have gone as far as deauthorizing all computers then authorizing the Macbook & still no luck. Any ideas?

Sorry, not sure how to screenshot on my computer, but this is what is says word for word:-
The Ipad could not b synced because the computer is not longer authorised for purchased items that are on this ipad.
To authorise this computer for items purchased from the iTunes Store, choose Store>Authorise this computer.
I have done all of that but not luck. That's when I tried deauthorising all computer which it did ok. I then authorised my Macbook pro again, it said I had one computer now authorised. I tried to delete apps via Itunes then sync to my iPad, but the above message keeps popping up & it wont do what I want.

Macbook pro won't boot with two new 4GB RAM sticks.

I have a mid 2010 Macbook Pro. It came with two 2GB RAM sticks. After downloading Lion, my computer started to get sluggish so I thought I would upgrade the ram. I bought two 4GB Corsair RAM sticks and tried to install them. My computer will boot up if I install one of the new 4GB sticks and leave an old 2GB stick; but it won't boot with both of the new 4GB sticks. Any ideas?

rdsvs wrote:
all specs are the same. old and new has code as below
pc2-5300 ddr2 667 200pin
Unless I misread your reply, that is not quite accurate.
Late 2008 Macbooks uses DDR3 1066MHz 204 PIN.
Late 2011 Macbooks uses DDR3 1333MHz 204 PIN.
Late 2012 Macbooks uses DDR3 1600MHz 204 PIN.

Macbook Pro won't connect to wireless printer anymore suddenly

Suddenly my Macbook Pro won't connect to my HP Photosmart B210e Printer. I have tried adding it via IP address, it worked but I can't print anything. It says the printer is busy and idle? I updated the software and drivers. All other computers and devices in my home connect just fine. It is connected to our wireless router as is my laptop.
I have searched online and done all the solutions I could find and nothing is working. VERY frustrated as I have to log onto my Dell to print anything.
Thanks in advance for any help!
Kim

"It says the printer is busy and idle?"
System Preferences>print and Scan. What is the staus of the printer? Green light for idle or yellow light for in busy? Have you tried power down the printer and paowering it back up?

Macbook Pro won't operate with Netgear wireless router

In my setup, the macbook pro's physical IP address has to be configured in my router and that seems to be entered OK. However, the macbook won't work wirelessly via the router. The router uses 128bit hex WEP key and the macbook at first seems to accept the key even though it fails to function. When I go back to check the settings however, it seems the macbook is requiring a WEP password, not a key. Could this be the cause of my problem? How can I sort out this problem please? TIA .... Greg

First try with out a password. Then try a 10 digit WEP key.

MacBook Pro won't connect to wireless network unless tilted

Hi! My MacBook Pro occasionally has trouble connecting to the wireless network in my house, but that can usually be solved by turning Airport off and then back on. Today (very suddenly), Airport disconnected from my network and could not find it again. I tried restarting my MacBook Pro and router multiple times. Finally it was able to connect, but here's the thing: it only works if my MacBook is tilted at an angle. If I try to open a webpage while the MacBook is sitting normally on a flat surface, the page won't load. If I lift one side of the MacBook so that it's tilted at a 45 degree angle, the page will load. Once it's level again the internet will stop working and the Airport signal bars will turn gray.
I've never come across a problem like this before. Everything was running fine this morning. It is so strange and I have no idea what to do! Help, please? Is my Airport dying? Is something loose inside? My MacBook Pro is about 4 years old.

Delete your network from system preferences, network, advanced.
re enter your network you wish to join
If that fails then do a PRAM reset
http://support.apple.com/kb/ht1379
and a SMC reset
http://support.apple.com/kb/HT3964
Maybe something to do with the motion sensor
if so try resetting the SMC

MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
Both hard drives have OS X 10.9.4 installed
If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

So after switching the internal SATA cables from each computer, now we have
His computer, with my SATA cable:
1) Worked with every hard drive!
My computer, with his SATA cable:
1) Works with 1 TB Toshiba hard drive
2) Works with 500 GB Seagate hard drive
3) Works with my original hard drive
4) Flashing folder with question mark with his old hard drive
So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

Macbook pro won't pair with iphone

Hi folks,
I have an iphone 4S running 7.0.3 and a Macbook pro with newly installed Mavericks.
I have failed to get the Maps app on the Macbook to find the iphone to send directions.
Now when I try to 'pair' the two devices with Bluetooth they can see each other but refuse to stay connected.
Two problems or possibly one causing the other.
Any help would be appreciated.

You are quite correct that Bluetooth isn't the usual method - in truth I'm frustrated that the Maps app on the Macbook won't find the iPhone to send to.. Therefore I have tried to 'link' the two devices by any means and tried Bluetooth almost as a last resort.
Both devices are connected to the cloud and I have checked that I have up to date OSs on both.
chattphotos - your screen shot is bang on - but it should have one or more devices listed as well to send the info / map to. That's where it is falling short and hence my attempts to 'find' the iPhone.
ChrisJ4203 - I'm sure you are correct as well. Bluetooth probably isn't the correct method, however I'm struggling to find what is.

MacBook Pro won't sync with iCloud, although iPhone and iPad are fine.

My MacBook Pro keeps telling me it can't sync with iCloud because my password may be incorrect. I keep re-entering the correct password, but this keeps on happening. iCloud seems to be working fine with iPhone and iPad. Also, there are 2 iCloud accounts showing on my MacBook, but if I try to delete one, it seems to delete both.

Your signature says you have 10.3.x but presumably this can't be correct - could you please make sure it's correct to prevent confusion. 10.7.2 is required for iCloud - your Mac won't be able to sync with pre-Lion systems.
The fact that you have iCloud accounts showing does suggest you have Lion: are they showing in System Preferences>iCloud, or where? You can only enter one there.
Are the two different or the same? You could try deleting both and then starting the setup again from scratch.

New Macbook Pro won't work with Snow Airport

I am trying to connect my new Macbook pro with an old airport snow.
The macbook can see the airport's network, but everytime I try and connect to it there's an error.
I can connect to the airport via the ethernet, but if I try to use the assistant for the snow/graphite models it says i don't have a airport card installed. Which I do.
Is it possible to connect my new macbook with this older airport. Or is my computer to new for this old wireless router?
Any ideas??

Thanks for the input. Yes, I've driven the 23" with another Mac. I took the laptop back to the shop today. Hopefully they can resolve the issue.
Macbook Pro Intel Duo Mac OS X (10.4.8)

MacBook Pro won't sleep with external monitor

Hello,
have a problem. I'm using external monitor with my MacBook Pro. If I close the lid, I see all windows on external monitor and Yosemite won't sleep. Can you help me please? My external monitor is Samsung 21.5" and I'm connecting it to MacBook Pro via DVI.
Thank you

Hey Renecek,
My first thought was, "Hey, you are using closed-clamshell mode".
How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display - Apple Support
But then I realized, wait, you want it to sleep.
For that, check out the suggestions in these articles.
OS X Yosemite: If your Mac won’t go to or stay in sleep
OS X: When your Mac doesn't sleep or wake - Apple Support
Take care,
Nubz

MacBook Pro won't communicate with wireless HP6500 printer

Similar Messages

Maybe you are looking for