MacBook Pro won't eject disks
it tells me that items may be in use and that i need to close applications, but no apps that are related to the disk contents are open. i can't eject unless i restart holding down the click button.
any help?
Yes this can be a pain.... restart the computer and that should sort the problem for you.
Hopefully this is helpful or solved your problem. Consider rewarding some points!
Please see the "helpful" and "solved" button's on top off this message.
Similar Messages
-
My Macbook Pro won't boot past the gray screen. I tried to reboot off the disk which did not work and now the machine will not eiect my disk. How do I get it out?
Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD -
My Macbook won't eject my CD. I've managed to get it in, but it won't eject, after trying pressing the eject button, holding it down while the computer restarts and the command prompt in Terminal.
Can any one help me please?It's likely you'll have to get physical. This works but requires a few tries.
Take two playing cards. You'll use these as tweezers essentially. Use fairly stiff high quality ones.
Fish around gently and put one on top of the disk and one on the bottom of the disk.
Once in place keep sweeping in and pulling out as you hit the eject button trying to grab (with friction and sweeping motion) and pull it out. Don't fully remove the cards but keep sweeping in and out. It works on MacBooks and slot loading iMacs.
This is assuming your macbook still makes the eject sound like it's trying to push something out. I've gotten disks out that have had 2 disks stuck in as well as stuck disks from faulty drives.
IVe also also used business cards but playing cards work best. -
Macbook Pro won't eject cd completely
When trying to eject a cd on my Macbook Pro I clearly hear the eject mechanism working as it should. But somehow the cd never comes out. Instead the drive acts as if a cd was just inserted and starts reading the disc.
I've tried various commands in Terminal, rebooting the computer while pressing the mousepad and even tilting the MBP in various directions while ejecting - all with similar results.
I'm getting pretty desperate. Suggestions anyone?My MBP just started doing this yesterday, I was able to eject the disc by holding my MBP upside down i scheduled an appt for later today to have my drive replaced
-
My MacBook Pro won't support disk
I have a disk with medical information. My MacBook Pro will not support this disk? What can I do?
There are apps to read the data Does the disk contain MRI, CAT, and/or Xray data? If so I have used OsiriX to read this kind of data:
It's available here:
http://www.osirix-viewer.com -
When I press eject, it begins to eject, you see the slightest millimeter of the disc pop out, then it immediately gets pulled back in. I have tried everything (the keyboard button, dragging the desktop symbol into the trash, ejecting through disc utility, rebooting and holding down the trackpad, and even the code to make it manually eject). How do I get it out? I really don't care if the CD gets damaged in the process, just not my macbook.
Try these options (it may help if you orient the MBP so that gravity is an ally):
Credit Kappy.
Worst case, make an appointment at an Apple store genius bar. The technicians are good at this.
Ciao. -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
CD will not eject and MacBook Pro won't restart
CD will not eject and MacBook Pro won't restart.
Do a SMC reset, that hopefully should get you booting and while booting, hold the option/alt and trackpad button down at the same time. Once a row of icons appears and if the disk hasn't ejected via the trackpad method, then press the eject key on the keyboard until it does.
Click the arrow to boot up OS X.
http://support.apple.com/kb/HT3964
If this doesn't work, then take the machine in for service. -
I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one. -
My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?
Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
Quit and you should be able to install OS X now with your Apple ID and password.
see
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/ -
MacBook won't eject disk during multi-disk installs, or after an install
Oy, will the problems never stop?
I have a dual-core MB 2.66 machine. I just put a fresh 500 gig drive and installed a retail copy of Snow Leopard. That seemed to go fine. Now I'm installing apps. And what's cropped up is that the machine refuses to eject disks after the install is complete.
I had to run the Adobe CS5 install twice because of this problem; luckily it ejected disks as it was supposed to the second time around. However, with iLife, iWork, Quicken, etc., after the install was done the disk refused to eject, and I had to hard-quit and eject the disk during next startup. And now Final Cut Pro is acting the same way...I use the install disk, then put Audio Content 1 disk in...it churns for two hours adding those files, then asks for Audio Content disk 2...but WON'T eject Disk 1!
I'm at my wits end. I never had these problems with Tiger...If I understand you correctly, you have two disks with Tiger and you installed a new disk on which you install Snow Leopard & apps.
Personally I would not have done this project that way. I would have used CCC or SuperDuper to clone one of the Tiger disks on to the new disk and then test to be sure the disk is working correctly first. A clone is a bootable copy of a system disk that contains everything from where the device used to make it.
Then and then I would install Snow Leopard. After installing Snow Leopard, you could use Setup Manager to copy over your data from the Tiger disk.
With the problemas you are currently having it might be easier to start over this way.
Allan -
Start up Disk full and MacBook Pro won't reboot. Only white screen but can sleep, restart, shut down.
Reboot into Safe Mode (hold the shift key down at the sound of the chime, release when the progress bar appears) Safe Mode will take longer to boot than normal.
-
Macbook Pro won't mount during target disk mode
I don't know what to do.
I was using Safari today when the whole computer froze. Nothing was responding, so I had to force shut down.
When I went to restart, I got a gray screen with the apple logo and a progress bar; the bar will take a while to fill, then the computer shut down completely. Happens every time now.
I tried booting in safemode and it didn't work; the command prompt details said "Incorrect number of thread records. (4, 29503)" and "Incorrect number of extended attributes (It should be 381007 instead of 381008)"....... What does that mean????
I tried booting the backup drive and running disk utility to diagnose the problem, and it said the disk is unable to be repaired etc.
Now I'm trying to salvage my important files by using the firewire target disk mode with another mac. My macbook pro won't even mount; disk utility said it can't be mounted and is damaged.
Please help--what do I do to save these files???My workflow was like this:
Partitioned fresh hard drive into 2 partitions: 1 for OS clone, 1 for data recovery
Used Carbon Copy Cloner (an excellent tool) to clone working OS to 1st partition
Attached harddrive to malfunctioning MBA
Held Option on malfunctioning MBA and booted to cloned drive
Once booted, I used old-school Data Rescue II to salvage data from MBA internal drive to my data recovery partition. (Probably need a newer / better data recovery program, as this one changed file names, moved things around, was generally not that awesome...)
Used Disk Util from booted clone to format MBA internal drive.
Used Carbon Copy Cloner to clone to formatted MBA internal drive.
Shut down, disconnected external drive, MBA booted normally.
Think that's everything. I've been touting the excellence of Carbon Copy Cloner for a while now for backups. In my opinion it's much more thorough than Time Machine backups, as you don't need a functioning OS. You can boot to a clone -- time / life saving! -
My MacBook Pro won't read my WILCO, Sky Blue Sky cd
I have an unusual problem...My MacBook Pro won't open my WILCO, Sky Blue Sky cd. I've had to restart my laptop while pressing the mousepad down to eject the cd which keeps getting stuck whenever I insert it. I have burned this cd on my PC laptop and wondered if there's a certain "lock" on the cd after that but I've researched this scenario and found no mention of such a case online. Luckily, this is the only cd my MBP can't seem to read at all. Where other cd's I insert launch iTunes and appear on my desktop, this particular cd doesn't and it freezes iTunes if I test its Eject function on it. My disk utility can't read it either and puts it in a perpetual "Gathering disk information..." mode. Pls help...this is a legally purchased cd and I should be able to burn it on more than one computer I personally own...This is really strange as I've had no other problems with other cd's or dvd's on my Mac...
First, try one of the DVD drive cleaning kits that are available.
-
Macbook Pro won't login after sleep (sleep with low battery --> mac turned off maybe it's called save sleep)
So if I hit the powerbutton my mbp booted like it is booting from the save sleep (so very fast and the login screen is there in about 10 sec.and there is no apple logo while booting just the desktop screen in "unsharp" ore foggy however...)
Then when i see the login (if the keyboard backlight turned on) i wand do tipe in my code but it won't work... the trackpad is not working; and when i plug-in a usb mouse the mbp is not powering on the usb-mouse (laser is off)
Why is that this way?
Is there n option to wake up the mbp fromm deep/save sleep without haveing issiues after that?
THXSorry for such a long delayed response...
I was able to get to an apple store this past weekend, and let me tell you... I'm about finished with there great "support".
Right before I went to the store, I tried to eject a disk. Well the cloth in the SuperDrive (I assume to protect the drive from dust and such) Pulled up with my disk. So I get the Apple store, describe my problem and what happened with the cloth piece. The "Genius" writes up a form and tells me they have to run diagnostic and it will take a couple days... and I will get a call when its done (1-3 days).
Well on day number 3 I called up the store and they told me it was ready to be picked up? I asked if anything had been fixed and they told me they could not reproduce my "sleep issue", so they couldn't fix that.. but told me the cloth piece in the SuperDrive had been fixed.
I drive an hour (one way) to the Apple store to find that all they did was PULLED OUT the cloth... they did not replace it! So basically I have a hole for a Super Drive.
I asked why I was not called to say that my computer was ready to be picked up... didn't get an answer on that one.
I asked why my SuperDrive was said to be fixed, when nothing was done... they told me that it would have to be sent out to the factory store for that to be fixed (FIRST TIME THEY MENTIONED THAT!) Oh, and that would take 5-7 business days. Well that's not going to happen right now considering I'm a college student that NEEDS a working computer!
So I go home, angry... start just putting all my important documents back on the computer. And the screen starts blinking!!!! I guess now I have the same thing described in another post on these forms...
Lets just say that I'm not very happy with Apple right now! If anybody else has success on either the sleep issue or the screen blinking issue, please let me know!
Thank you!
Maybe you are looking for
-
Hi, How can we print Descriptions and other text as text lable in module pool???? Thx, Shashi.
-
How to skip first screen that is not selection screen.
Hi Experts I am working on a module pool program where in I am required to call a transaction with skip first screen. the first screen of this transaction is self made screen with screen painter with input boxes and a submit button with an OK_CODE. n
-
Does anyone know of a relatively inexpensive MP3 to WMA converter?
-
How do you find the "iT 1.tmp" file for iTunes?
Hello, I am currently having problem with my iTunes library. A couple of days ago, very randomly, most of my music and movies disappeared from my iTunes library. I had recently updated iTunes, but it was a week after the update that this happened. Al
-
I am developing a GUI in using Java Swing. In that I can draw lines or different shapes. I need to click on a line and get its end coordinates on a text field. Can anyone help me out?