Macbook Pro won't hook up to HDTV.

I bought a mini displayport to HDTV cable and it won't connect to the tv. I have everythign connected properly but the only thing I'm seeing might be a problem i that my Display settings, it doesn't have the Arrangement tab. I am currently running OSx 10.8.2 (Lion).

What miniDisplayPort to HDMI adapter are you using? sometimes they are incompatible and have problems.

Similar Messages

My MacBook Pro won't let me mount my external Hard Drive. Just trying to restore my iTunes library.

My MacBook Pro, less than a year old, started acting weird. I backed everything up, took it in to Best Buy, who sent it out to Apple Repair and they put in a new motherboard.
It's running on Mac OS X Version 10.7.4
Now I am trying to put everything back on the computer from my external Maxtor 80GB Hard Drive. MacBook Pro won't recognize the external drive.
I tried Disk Utility. I can see the external drive, and did a repair disk and verify disk. Several times. Each time it says "This partition map seems to be ok."
However, I am not able to mount it, as that option is greyed out and i can't select it.
Also, under the Icon for the external hard drive, it has the Macintosh HD Icon (essentially my computer). I tried to restore this way, didn't work.
I need this to mount, as it has all of my itunes stuff on it; dozens of my sons movies, and my entire iTunes library.
PLEASE HEEEEELP!! HOW CAN I MOUNT THIS EXTERNAL HARD DRIVE? Thank you in advance

Try things in this USB/Firewire faq.
DALE

I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

My MacBook Pro won't connect to the Internet, but my phone and PC will.

My MacBook Pro won't connect to the Internet. My iPhone has no problem doing so, and neither does my PC. I think it's something to do with my DNS, but I'm not sure. My network connections say that both my Ethernet or FireWire are failed. What's wrong with my MacBook? Is there a simple way to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

TS1627 iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

Just got a new iPhone 5 and now iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

Hi Jetjuice!
I have an article that can help you troubleshoot this issue a little further and can provide you with some more steps to take in attempting to resolve this issue:
Sync Services: Advanced troubleshooting for contact and calendar syncing
http://support.apple.com/kb/ts2481
That article has an extensive list of steps to perform in attempting to get the calendar to sync again, and those steps should help you resolve the issue. Thanks for using the Apple Support Communities!
Cheers,
Braden

MacBook Pro won't play .mov or .wmv files.

Since "upgrading" to Lion my MacBook Pro won't play .mov or .wmv files, all I get is a black screen and the audio. It's so frustrating!!
I've read many other posts all along the same lines and wherever possible I've tried to follow the advice which has been given but nothing works.    I've updated all the drivers I can and I've even reinstalled Lion, nothing makes a difference.
I'm not really looking for any more advice, all I want is someone from Apple to read these posts, realise there is problem and get working on a fix or update.
I had no problems when running Snow Leopard and it would seem, looking at everyone else's problems, that the common issue is Lion.   Seriously, this is one area where Lion is a backwards step.   It should just work (like most things from Apple), but it doesn't.
Personally I believe there is a problem with Lion but from what I've found out from speaking to friends with other Apple kit, this might be a random issue only affecting some people as some have said they've had no problems while others have had the same issues as me.    One guy reinstalled Lion and it resolved the issue for him, I've not been as lucky.
As I say, I'm not really looking for more advice, simply some sort of update from Apple to fix it.   PLEASE!!!

I'm not really looking for any more advice, all I want is someone from Apple to read these posts, realise there is problem and get working on a fix or update... As I say, I'm not really looking for more advice, simply some sort of update from Apple to fix it.   PLEASE!!!
This is a peer-to-peer user forum. Perhaps you would see more action if you and others would file a formal "Bug" report with Apple QuickTime technical people rather than repeatedly reporting a possible problematic problem which may or may not affect others on a random basis. QUICKTIME PRODUCT FEEDBACK
Since you aren't seeking further advice here is what I have observed. Not being a regular WMV file user, I had to create my own sample file to test—a WMV 9 file containing WMV3 compressed video and WMA2 compressed audio. Since I normally use QT 7 as my primary media player, I also stored the WMV data in its partially decompressed form in an MOV file container to avoid pre-playback delays in "classic" player routines and also provide a secondary playback test of MOV wrapped content. These files play as follows using the Flip4Mac component/player support and uncoded URL uploads:
QT 7.6.6 "Open File" - both files play correctly.
QT 7.6.6 "Open URL" - both files play correctly.
QT X.1 "Open File" - WMV file plays correctly. MOV file plays video without audio.
QT X.1 "Open Location" - WMV file appears to open but plays with "black" screen and no audio. MOV file plays video without audio.
VLC "Open File" - WMV plays correctly. MOV file doesn't open,
VLC "Open URL" - WMV file plays correctly. MOV file appears to open but nothing plays.
MPEG Streamclip "Open File" - both files play correctly.
MPEG Streamclip "Open URL" - both files play correctly.
GarageBand - WMV file will not import but MOV file does.
iTunes - WMV file will not import. MOV file container is accepted but as soon as iTuness sees the compression formats, it aborts import.
Safari - WMV file URL auto-downloads and playes in the QT X.1 Player. The MOV file URL opens and plays in Safari.
As you can see from these results the files do play but are subject to many different constrints based on old/new video technology support, independent QT subsets and/or container trapping constraints. In short, individual user results will depend on presence/absence of component support, actual compression formats, file container, application being used, and how the application is being used. Unfortunately, most users here can't or won't provide the prerequisite information or a sample file for independent examination. This makes it next to impossible to give advice in these matters or categorize the specific nature of the problem.
SAMPLE WMV FILE
SAMPLE MOV FILE

Hi! My MacBook Pro won't start! HELP !!!

Hi! My MacBook Pro won't start! I have tried everything I can think of like Safe Mode (doesn't work), Recovery (does not find Recovery Drive), Booting with OS Snow Leopard Cd (doesn't work)...
I have really no clue about what to do now... I paid quite a lot of money for this computer and am pretty short of money nowadays! Would like to repair with help rather than having to take it to Apple Store.
Has anyone had this same problem?
All I get is white screen + grey Apple and spinning grey disk... it's 100% frustrating! Any help would be more than welcome since I think i've tried EVERY SUGGESTION on this Support Center and Youtube videos...
This MBP is from 2011, runs on OS X 10.6.8
I tried booting with OS X Snow Leopard CD, it didn't work! (my cd player works! recognizes the Snow Leopard CD, but then never opens it... goes back forever to the with screen + apple and spinning disk)
I don't care about the content, it's OK if i lose all DATA... I just want to bring this Mac BACK TO LIFE!
When i run coomand on root# fsck -fy --> RESULT = my HD was checked and seems to be FINE!
Thanks

Please make a Genius Appointment and take it in for service.

I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?

I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?

Did you follow the instructions on the page linked below?
OS X Yosemite: Recover your entire system

My Macbook Pro won't boot up, only in safe mode!

Help, my macbook pro won't restart, only in safe mode! and it seems that safe mode has plenty of implications for use. my usb memory stick doesn't seem to be recognized while in safe mode. I was doing a cleanup on mackeeper just after I downloaded a trial version of microsoft office mac. The trial wouldn't work properly so I deleted it and decided to do a cleanup with mackeeper. than the mac froze while mackeeper was doing it's cleanup and the screen flashed black a few times. Ever since it won't boot up unless I use safe mode. Also, I downloaded the most recent updates while in safe mode but it doesn't seem to be recognizing that I already downloaded them because software update is still telling me that I have 6 updates. So I am horribly confused at this point. Please help, I need this laptop to do report cards (it's a good thing I got an extension). thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
You can then quit Terminal.

My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
Quit and you should be able to install OS X now with your Apple ID and password.
see
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

MacBook Pro won't reboot. Get spinning circle even after hard drive replaced at Apple Store

MacBook Pro won't reboot. Have to reinstall OSX each time I shut down in order to get it to start up. What could be wrong? I had the hard drive replaced already.

You shouldn't be using the disc at all. I thought I had made that clear. Boot from your recovery partition and run Disc Utility. If you get the same result -- the internal drive can't be repaired -- then you should consider replacing it. No storage device can be trusted, in my opinion, after throwing an error like that. But whether you choose to replace it or erase it, you have to get the data out first.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot from your recovery partition (10.7 or later), a local Time Machine backup volume (10.7.2 or later), or your installation disc (10.6.8 or earlier.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have a working Mac, and both it and the non-working Mac have FireWire ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

MacBook Pro won't recognize 1TB external drive

Hey team,
My mid-2010 MacBook Pro won't recognize my WD My Passport 1TB drive. I was copying files from the drive to my computer when my computer went to sleep (didn't run out of power, just went to standby mode). Turned computer back on and now it won't recognize the drive.
It is a USB 3.0 cord (computer is only USB 2.0 and the cord works with other drives) and when plugged in, the light turns on and the disk spins but isn't recognized my this or other computers (also not in Disk Utility).
Tried a handful of disk recovery programs but nothing wants to 'see' the disk plugged in.
Thanks for any and all suggestions.

yes yes yes, I warn people about WD drives on this link:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
theReKleiner wrote:
What now?
Only option is to buy the SAME exact HD and swap controller boards, or pay someone a LOT more $$$ to do the same thing.
its not soldered there, its just a controller/ SATA "one piece"
They do that to save 50 cents in mfg. costs.
I mention your "issue" in that link. Which is why you do NOT buy WD ext. HD.
they make the controller board and SATA card one piece.
CURRENT MFG. THAT HAVE controller board and SATA cards as one piece are : WD USB drives, and Toshiba USB Canvio
However Toshiba didnt USED to do that, but they started doing it at the end of 2013.
avoid those 2.
To avoid that nonsense, buy Hitachi drives in USB.
Or, the best option:
Save money and invest in a bare hard drive backup and redundancy plan
Its cheaper
less fuss
more reiable, removes the nasty failure point of SATA card interfaces.
takes up lot less space.
Bare hard drives and docks. The most reliable and cheapest method of hard drive data storage, archives, and redundancies
The best method for your data archives and redundancies, which is also the least expensive, the most reliable, and the most compact option is the purchase of naked hard drives and at least one USB 3.0 HD dock ($40 roughly).
While regarding Time Machine and your Macbook or desktop, your primary backup is best saved to a conventional USB (or Firewire / thunderbolt) hard drive inside an enclosure, the most important part of your data protection begins after your 1st / primary Time Machine / backup; and these are your secondary (most important) data storage devices, archives and their redundancies.
However bare hard drives and docks (below) also work perfectly as a Time Machine backup, this is for home use, since the docking station is certainly not very portable as a notebook Time Machine backup device should be; nor should bare HD be packed around with a notebook, rather remain at home or office.
Six terabytes of 2.5" HD pictured below in a very compact space.
Bare hard drives and docks have the lowest cost, the highest reliability, and take up the smallest storage space
Drawbacks:
1. Care and knowledge in general handling of naked hard drives (how not to shock a bare HD, and how to hold them properly). Not a genuine drawback.
Advantages:
1. By far the least expensive method of mass HD storage on a personal basis. Highest quality naked HD can be purchased in bulk very cheap.
2. Eliminates the horrible failure point of SATA bridges and interfaces between external drives and the computer.
3. Per square foot you can store more terabytes of data this way than any other.
4. Fast, easy, no fuss and most simplex method of data storage on hard drives.

MacBook Pro won't sync with other devices

My MacBook pro won't sync with other devices in the house. My iPad and iPhone sync OK but MacBook won't for some reason. Can you help?

Sign into your account in iTunes - from that page you should be able to deauthorise ALL 5 authorised computers - supposedly you can do this once a year.
Thereafter any devices you no longer have will be deauthorised, and you can reauthorise those you still have or are new.
AC

Macbook Pro won't boot with external HDD plugged

I have a weird problem. My late 2008 Macbook Pro won't start with external HDD plugged either FW or USB... The screen stays white until I unplug it and then the Apple logo is there.
Anyone know any solution for this? Or anyone have the same problem

yeah I had the exact same issue with one of my 750GB externals too. I just left it for a while (about an hour or so) and it was fine..
I believe its so slow because the system is indexing the drive, which can be a very slow process if the drive is big, has a complex folder-hierarchy, and/or is fragmented.
Does the hard-drive appear quite quickly in Finder once OS X has started up? if its slow it may confirm what I've just said.

Macbook Pro won't hook up to HDTV.

Similar Messages

Maybe you are looking for