MacBook Pro won't print in color to Canon ImageRunner network printer

I have a MacBook Pro that I have installed drivers for and I am able to print to the Canon ImageRunner Color 5185i printer in our office. However, I cannot seem to get it to print in color. I have downloaded and installed the latest drivers from Canon but to no avail. Anybody have any ideas out there? This is a network printer with it's own static IP on the network. So frustrated...

I was having a similar problem with an HP printer. When I checked to see which driver my laptop was actually using (System Prefs>Print and Fax>Options and Supplies>Driver), it was using some sort of generic driver that worked fine for black and white, but wasn't getting color. I chose the HP driver out of the set listed and can now print in color. I know you said that you installed the latest drivers and you have probably already checked to see if those drivers are actually the ones being used by your computer, but if not, that might be a solution.
Good luck.

Similar Messages

MacBook Pro won't recognize videos on my Canon Vixia HG20

I have a Canon Vixia HG20 and had no trouble copying video to my Mac laptop in the past. Now I have a MacBook Pro and when I connect the camera with a USB cable, the videos are grayed out and the computer doesn't recognize them. The videos play fine on the camera itself. Also, the still photos show up on the computer and transfer easily. I've seen older posts & sites (2008, 2009) that are related to this issue, but I'm not sure they apply anymore. Any new help for 2012 out there? Please explain in layman's terms, as I am not very technically literate. Thanks!

Go to the Canon Drivers and Software page here and download the March and April software updates for OSX Lion. This should help in transferring video.
There is also a firmware update for the camera here.
Regards,
Clinton

Hp Photosmart 8750 - Trouble printing in color using 8750 as networked printer.

Hi,
I have an HP Photosmart 8750 Professional printer direct connected to a Win XP computer through the USB port. It is designated as a network (shared) printer. The printer works fine printing from the XP computer as I am able to set the print jobs to be controlled by the application I am using.
However, one of the computers on the network has a Windows 7 64-bit operating system. The computer recognizes the 8750 but I am only able to set the color management on the printer properties menu box to either ColorSmart/sRGB or AdobeRGB. There is no option to have the color management 'controlled by application'. Because of this, I am unable to print colored text in documents, at least in those created by Microsoft Office, Wordpad, or Adobe Reader. (Only programs I have tried to print with so far).
Is there a work around for this problem?
Tamm
Tamm

Hey @9redsoxfan9 ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I understand you are on your second HP Photosmart printer and you are experiencing the same issue of not printing color that led you to throwing out your old one. You have done the alignments, cleaning and even replaced the cartridges.
You have done all the troubleshooting I would have got you to do so I recommend you call HP Technical Phone Support.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps. Have a great day!
I worked for HP.

Macbook Pro won't print the first page of any file in any application.

Problem: My Mid-2009 Macbook Pro won’t print the first page in Microsoft Word, Sibelius 6, or in Adobe Reader. My printer is an old Canon MP480 that’s worked for almost 2 years perfectly. As well, the “print to pdf” function results in the same error. However, if I open a new user account it all works fine. To change user accounts would be an extreme hassle though so, if possible, I would like to first remedy this one.
Recent changes: the motherboard of my computer was replaced about a week and a half ago. I printed a lot of stuff from Word two days ago and that worked fine but, already then the print to pdf function was cropping off the first page. At the time, though, I accredited the issue to the word documents being filled with pictures of sheet music that I was printing instead of text.
Things I have tried:
Updated Mac software
Repaired Disc Permissions in Disk Utility
Checked for new printer drivers/firmware
Reset the PRAM (http://support.apple.com/kb/ht1379.)

No but it's not a printer-related issue because the "Print to PDF" function also leaves out the first page.

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

My macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

my macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

Might be a problem with the adapter.
Help here > Apple Portables: Troubleshooting MagSafe adapters

Macbook Pro won't connect to wireless printer anymore suddenly

Suddenly my Macbook Pro won't connect to my HP Photosmart B210e Printer. I have tried adding it via IP address, it worked but I can't print anything. It says the printer is busy and idle? I updated the software and drivers. All other computers and devices in my home connect just fine. It is connected to our wireless router as is my laptop.
I have searched online and done all the solutions I could find and nothing is working. VERY frustrated as I have to log onto my Dell to print anything.
Thanks in advance for any help!
Kim

"It says the printer is busy and idle?"
System Preferences>print and Scan. What is the staus of the printer? Green light for idle or yellow light for in busy? Have you tried power down the printer and paowering it back up?

My macbook pro won't print about 10% of the time

My macbook pro won't print to my wireless printer about 10% of the time. I don't believe it can "find" the printer. Any thoughts?

Boubert,
the question mark in the folder typically represents the inability to recognize a valid filesystem on the volume being booted from. You can try this, although it might not make a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to boot normally now?

My labeled files on my macbook pro won't stay colored

my labeled files on my macbook pro won't stay colored

Ok, in theory you cannot lock the hard drive, so, run Disk Utlities, First Aid, Repair Hard Drive again. It should come back with a message that all is OK. Then run Repair Permissions. That often returns a lot of messages that are not actually problems, just grumbling by the system.
Then try a normal restart by clicking the apple left side of the menu bar, Restart. If you restart normally all is fine.
If not, then restart on the recovery HD again and try an Install Mac OS X and see if that succeeds this time.

My Macbook Pro won't boot up, only in safe mode!

Help, my macbook pro won't restart, only in safe mode! and it seems that safe mode has plenty of implications for use. my usb memory stick doesn't seem to be recognized while in safe mode. I was doing a cleanup on mackeeper just after I downloaded a trial version of microsoft office mac. The trial wouldn't work properly so I deleted it and decided to do a cleanup with mackeeper. than the mac froze while mackeeper was doing it's cleanup and the screen flashed black a few times. Ever since it won't boot up unless I use safe mode. Also, I downloaded the most recent updates while in safe mode but it doesn't seem to be recognizing that I already downloaded them because software update is still telling me that I have 6 updates. So I am horribly confused at this point. Please help, I need this laptop to do report cards (it's a good thing I got an extension). thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
You can then quit Terminal.

After 10.7.4 update macbook pro won't sleep

after 10.7.4 update, macbook pro won't sleep.

Test after each of the following steps that you haven’t already tried:
Step 1
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 2
 ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 3
 ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

My macbook pro won't recognise HP C4480 scanner. Help please.

My new macbook pro won't accept my scanner. I have a C4480 photosmart printer and it will print from my macbook but when i try to scan, it says unknown error. I have installed from HP CD and from HP website but makes no difference. Help please. Thank you.

I also have this problem. My MacBook alays has trouble recognizing HP printers and scanners and I allways have to restart programs and reboot the laptop in order to scan with HP scanners.
However with the C4480 it just does not work it doesn't seem to matter how many times I reboot.
HP Products suck on the Mac. And tech support doesn't seem to have any answers.

My MacBook Pro won't start. It's old, c 2008, any ideas?

My MacBook Pro won't start. It's old, c 2008. Have tried many suggestions on line: opt, cmnd, r,p, etc. Any suggestions?

Hey treasure hunter,
I found some help for when your computer won't turn on. Try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.MacBook Pro: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
via: Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Welcome to Apple Support Communities!
Regards,
Delgadoh

How do I take 300 dpi photos with my iPhone 4s? And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.

How do I take 300 dpi photos with my iPhone 4s?
And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.
I have been using the standard camera on the iPhone and require 300 dpi to create photo books as the photos are resized according the layout.
Your time and assistance in appreciated.
Thanks

Thanks Tonefox!
After looking at a few of the links I found a mathematical equation that assisted me.
Inches = Pixels/DPI
eg: 3 inches = 300 pixels/100 DPI
Using this equation and the fact that iPhone 4s takes photos that are 3264 x 2448 I was able to work out the largest print I could make with 300 DPI.
Width 3264 pix/ 300 DPI = 10.88 inches
Height 2448 pix/ 300 DPI = 8.16 inches
Therefore, the largest print (with 300DPI) I can make of these photos is 10.88 inches x 8.16 inches.
Which is great!
So is it critical for me to change the dpi in say photoshop or does it not matter as long as I don't go above the 10.88 inches x 8.16 inches?
From what I can gather the smaller I resize the photo the higher the DPI and the bigger I stretch the photo the lower the DPI?
Further clarification will be much appreciated. Thanks

My MacBook Pro won't let me mount my external Hard Drive. Just trying to restore my iTunes library.

My MacBook Pro, less than a year old, started acting weird. I backed everything up, took it in to Best Buy, who sent it out to Apple Repair and they put in a new motherboard.
It's running on Mac OS X Version 10.7.4
Now I am trying to put everything back on the computer from my external Maxtor 80GB Hard Drive. MacBook Pro won't recognize the external drive.
I tried Disk Utility. I can see the external drive, and did a repair disk and verify disk. Several times. Each time it says "This partition map seems to be ok."
However, I am not able to mount it, as that option is greyed out and i can't select it.
Also, under the Icon for the external hard drive, it has the Macintosh HD Icon (essentially my computer). I tried to restore this way, didn't work.
I need this to mount, as it has all of my itunes stuff on it; dozens of my sons movies, and my entire iTunes library.
PLEASE HEEEEELP!! HOW CAN I MOUNT THIS EXTERNAL HARD DRIVE? Thank you in advance

Try things in this USB/Firewire faq.
DALE

MacBook Pro won't print in color to Canon ImageRunner network printer

Similar Messages

Maybe you are looking for