Macbook pro won't read windows 7 DVD

I have recently purchased a Genuine copy of Windows 7 home premium. When I go to boot camp, it tells me to insert windows 7 installer disc, when i do so, it doesn't recognize it at all. Sometimes the window for an empty DVD pops up.
Please tell me i didn't waste my money and time on a windows disc that will not work.
Help me please

post in the boot camp forum.

Similar Messages

Macbook Pro won't read Windows XP disc

My Macbook pro won't read either my 32bit or 64bit windows xp discs for installation on bootcamp. The disc spins, makes a strange noise then ejects. It seems like this is a common problem. I have previously installed windows via bootcamp before and it worked fine. Normal cd's are read fine as well, just the windows discs won't read.
Any suggestions?
Thanks.

Hi,
first: put your XP 64-bit CD as far away from your Mac as you can. Apples BootCamp does not support it
Second: I assume corectly that these are Retail or SystemBuilder XP discs, not some Recovery CDs or manufacturere-branded ones, right ?
Third: insert the 32-bit XP CD while in OSX and check with the Finder if it can be read there (checking for the 'usual' folders on it: i386, Support, etc and files: winip51.sp2 etc.).
Fourth: some people round here have successfully used a 'standard' DVD/CD-cleaner disc with their Macs.
Fifth: try making a 1:1-copy of your XP disc. You can use SimplyBurns in OSX for this.
Regards
Stefan

Macbook Pro won't recognize windows vista dvd

Hi everyone,
I just bought Leopard and a new copy of Windows Vista Home Premium to install on my Macbook Pro. Leopard installed fine. Had some issues partitioning (had to get the right size b/c of unmovable files). Anyway, i made a 27gb partition to install my Vista. However, when I put my install dvd into the drive, it spins, makes a funny noise, then asks for the install dvd. After it spins the dvd some more, it spits it out. It doesn't seem to recognize the install dvd. I've put the Vista dvd into my PC and it runs fine. I would greatly appreciate any and all suggestions.
Thank you.

I have exactly the same issue as you with mac not recognising the Vista Home Premium DVD either in Bootcamp or in the Finder. The applecare people were completely clueless and the guys at the "Genius" bar in the apple store were less than impressive and were insisting that it was a faulty DVD. Since i had tested it on various PCs and it worked fine, i knew it wasn't that. After 30 minutes of arguing they finally agreed to replace my DVD drive which unfortunately didn't help either. I have now ordered alternative media from Microsoft in the form of CDs for the cost of postage and will try that when they arrive and let you know. This is a problem that i'm seeing in various forums all over the place and is clearly some bizzare issue with Mac software or hardware which Apple refuses to acknowledge exists. P.S, don't bother re-creating the DVD as i tried copying the image to a USB drive on a PC and then burning it onto a blank DVD via the Mac. Although this allows the finder to mount the new DVD, Bootcamp still won't recognise the disc as a valid installer disc. More soon...

Macbook Pro won't read SOME commercial DVD's

I found some people with similar issues, but no one with my exact problem, so I thought I would post it here.
I have a MacBook Pro that I got in November of 2007. Recently I noticed my drive stopped playing certain discs. I did some test and determined that it will play/write pretty much anything you throw at it except for some commercial DVD's. I actually brought it to the apple store and foolisly grabbed some dvd's at random, assuming that NONE would work. The one's I brought mounted just fine. Since I couldn't replicate the issue, I couldn't get much help. He said to try logging into a different user, I guess to determine if there was an issue with my Library. I tried that, it does the same thing regardless of the user.
Basically, some discs spin, and spin like the computer is struggling to read it, then it spits it out. Young Frankenstein and X-Men: The Last Stand, work fine. Children of Men doesn't (it used to work just fine).
I initially noticed the issue when trying to install the digital copies that came with my Back to the Future Trilogy boxed set. Back to the Future's digital copy disc mounts fine. The discs for Part II and Part III don't.
I doubt the drive is busted since so many discs work fine and it isn't ALL commercial discs that won't mount. Only some. My theory is that it's software related. Maybe something with reading certain encoding.
This is the second time I had this problem. The first time I read that verifying and repairing disc permissions would fix it, and it did....but now that doesn't do the trick.
It is consistent though. The same discs either work or don't work EVERY time. I thought maybe the lens needs cleaning. I read conflicting things about using lens cleaning discs in slot load drives so that's a last resort. But I imagine it wouldn't be so consistent if it was a dirty lens. Also, other players I've had with dirty lenses just skipped or had a disc read error of some sort. I don't get any errors. I also ran the Hardware Test on my OSX Install disc, which found no errors/issues. I wonder if it would have detected my drive as an error if it indeed was a hardware issue? Makes sense to me, but I'm not sure what the Hardware Test tests exactly, if the drive is included in that.
Any suggestions? I saw a thread from 2006 where someone suggested that deleting (Library/Preferences/com.apple.finder.plist) helped him, but I am really hesitant to delete an item from my Library. That just seems like asking for trouble and I'm not sure what my finder preferences have to do with my DVD's not mounting. Next I will probably try resetting my SMC. I'm not sure how that could help either, but it's a suggestions I've seen floating about and it's easy enough to do.
Here are some of my specs:
Macbook Pro, Intel Core2 Duo, 2.4 ghz
4gb Ram
Boot ROM Version:    MBP31.0070.B07
SMC Version (system):    1.16f11
MATSHITA DVD-R   UJ-857E:
Firmware Revision:    ZA0E
Interconnect:    ATAPI
Burn Support:    Yes (Apple Shipping Drive)
Cache:    2048 KB
Reads DVD:    Yes
CD-Write:    -R, -RW
DVD-Write:    -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:    CD-TAO, CD-SAO, DVD-DAO
Media:    To show the available burn speeds, insert a disc and choose View > Refresh
Thanks. Sorry for the long and overly thurough post, but I thoguht that might help get me better help. Any input is greatly appreciated as it may save me the hour long trip back to the apple store.

I'm also having the same exact issues with some commercial DVDs and music CDs. It continues to read DVD-RWs but around two days ago it stopped reading commercially bought discs.
I've tested with brand new DVDs today (out of shrink wrap in pristine condition) all of which have the same region and have been tested on a DVD player, PS3, and another laptop without any glitches but only some of them played on my Macbook and the others would either spin for a bit and then ejected or it would read them as blank discs where the 'You inserted a blank DVD' message comes up.
I also tried testing older DVDs that used to play fine on my Macbook but only some of them mounted.
I then tried the following cleaning methods:
- Laser Lens Cleaner
- Compressed air
- Credit card with iPhone cleaning cloth
All of which failed to fix the problem so it's safe to assume this isn't a dust issue, the driver have also been very lightly used as I have only watched a handful of DVDs on it and written less than 10 DVD-RWs since I first purchased it in 2009.
My warranty has expired and replacing the drive would cost over $250 which I currently can't afford, therefore I plan to buy a cheaper external DVD burner but that is only a temporary workaround and I still hope for a solution other than replacing the driver.
Here's my info:
MacBook, Intel Core 2 Duo, 2 GHz
2 GB RAM
Boot ROM Version:    MB52.0088.B05
SMC Version (system):    1.38f5
MATSHITA DVD-R   UJ867A:
Firmware Revision:    KK08
Interconnect:    ATAPI
Burn Support:    Yes (Apple Shipping Drive)
Cache:    2048 KB
Reads DVD:    Yes
CD-Write:    -R, -RW
DVD-Write:    -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:    CD-TAO, CD-SAO, DVD-DAO
Media:    Insert media and refresh to show available burn speeds

Macbook Pro won't read windows OS disk?

Upgraded my MBP to a 500gig HD, Imaged the old to the new with carbon copy clone, everything work fine on Mac side, but when I try to reinstall windows VIA bootcamp it won't recognize the windows disk. Like it won't recognize the windows OS disk at all (no matter when I put it in). It's an OEM disk 32 bit vista or 7 (i have 2). The disks work in other machines and my MBP can see them from an external disk drive, but then bootcamp won't install them... I get a screen that goes from the apple, to a folder, to a circle with a line through it... The laptop read the Mac OS disk fine, other dvds, and cds fine. Any takers???

Hi,
first: put your XP 64-bit CD as far away from your Mac as you can. Apples BootCamp does not support it
Second: I assume corectly that these are Retail or SystemBuilder XP discs, not some Recovery CDs or manufacturere-branded ones, right ?
Third: insert the 32-bit XP CD while in OSX and check with the Finder if it can be read there (checking for the 'usual' folders on it: i386, Support, etc and files: winip51.sp2 etc.).
Fourth: some people round here have successfully used a 'standard' DVD/CD-cleaner disc with their Macs.
Fifth: try making a 1:1-copy of your XP disc. You can use SimplyBurns in OSX for this.
Regards
Stefan

Macbook pro won't read discs

macbook pro won't read discs. I have tried resetting the SMC & the computer itself. Any ideas

What exactly happens when you try?
Have you tried both DVDs and CDs?
Try a cleaning disk.
Otherwise it would seem that the optical drive failed.

Mac pro won't read windows 7 install disc?

My 2007 mac pro won't read windows 7 install disc. My macbook reads the disc fine, so it is not a problem with the disc. It is 32-bit. The apple help line suggested firewire connecting the macbook to the macpro and starting the macbook in target disc mode, but other posts I have read have said that this will not solve the issue. Any suggestions?

Could be. I just rebooted and it read the disc. Unfortunately the windows install got interrupted and I had to reboot, and now it wont read the disc again. Is there any other way to install windows 7 to bootcamp, other than from the disc? Can I use FireWire and target disc my MacBook (the MacBook reads the disc just fine)?

My MacBook Pro won't read my WILCO, Sky Blue Sky cd

I have an unusual problem...My MacBook Pro won't open my WILCO, Sky Blue Sky cd. I've had to restart my laptop while pressing the mousepad down to eject the cd which keeps getting stuck whenever I insert it. I have burned this cd on my PC laptop and wondered if there's a certain "lock" on the cd after that but I've researched this scenario and found no mention of such a case online. Luckily, this is the only cd my MBP can't seem to read at all. Where other cd's I insert launch iTunes and appear on my desktop, this particular cd doesn't and it freezes iTunes if I test its Eject function on it. My disk utility can't read it either and puts it in a perpetual "Gathering disk information..." mode. Pls help...this is a legally purchased cd and I should be able to burn it on more than one computer I personally own...This is really strange as I've had no other problems with other cd's or dvd's on my Mac...

First, try one of the DVD drive cleaning kits that are available.

MacBook Pro won't read audio cds

My MacBook Pro will not read digital audio cds.
It has in the past, but now it seems to have stopped reading them.
I have several purchased cds I would like to get on itunes, but I can't get it to recognize the discs.
I can hear it spinning several times, like it is trying to access the disc, then it ejects it without mounting.
It does not appear in iTunes, or anywhere on the desktop.
It will read and burn blank cds and dvds.
I havde a 17" MacBook Pro, 2009, with a MATSHITA DVD-R UJ-868 drive.
Anyone have any ideas how to get it to work again or what the problem could be?

yes it could but probably not after testing ten different CDs right? Got the very same scenarion and asked the question again here, pls see https://discussions.apple.com/message/22423010#22423010

MacBook Pro Won't Read a DVD+R (RW) Created on a Panasonic DVD Recorder

Hi,
I recently used a DVD Recorder to transfer VHS tapes to DVDs. The disks (DVD+R RW) read fine on the video recorder and other dvd playback units, but won't open on my MacBook Pro. I keep getting the screen that asks me to format. Is this a problem with my MacBook? I'd like to edit these DVDs. Can I do that?
Thanks,
Chris

One other slight possibility is that the drive in the problem MBP is a different brand to the one in the "good" one, and for some reason doesn't like that particular brand of media (they all have slightly different reflective properties etc). You can check in System Profiler to find out what sorts of drives are fitted in each.
But a bit of dust or film on the lens is the most common cause of optical drive problems, so a cleaning disc is certainly worth trying. I actually run one in my own computers every month or so. Seems to keep them running for years while others have issues after months!
Cheers
Rod

MacBook Pro won't read DVD+R media?

I have a first gen MacBook Pro, 15" 1.83GHz Core Duo processor with the Matshita DVD-R UJ-857 drive.
I have a number of data discs that I have written to DVD+R media (using another computer). When I place them in my drive, the MBP doesn't recognize the disc. I also have some DVD video I burned on DVD+R media, and the same thing: the MBP won't recognize the disc.
Anyone know why? It can read DVD-R just fine, but I haven't yet gotten it to read DVD+R at all.

I use a MacBook Pro 17" Core Duo and I am
experiencing the same issues where this MacBook will
not recognize Memorex DVD+R 4x discs burned on a
Lacie external 16x drive. Unfortunately for me, all
my backups over the last year are on these discs,
which seem to work in every other player or Powerbook
I have needed to load them on.
In general, Memorex uses the cheapest quality media possible to maintain their price point. Usually, this means Ritek and Prodisc media, which both vary widely in quality. Sometimes the media is great, other times crap.
Seems like the MacBook Pro drive has issues reading crap discs unfortunately.

My macbook pro won't read dvds from my external cd/dvd drive.

I have a new macbook pro 13 that I got for Christmas. I purchased a external cd/dvd usb drive so that I can watch movies on my mac since it doesn't have a dvd drive built-in. I put my dvd into the drive, and all my mac does is open a fiel that has the video and audio seperated. I tried clicking on the video file to see if I can watch it, but the computer has no software to read it, apparently. I don't know if this is a software thing or if it's my drive.

First, try one of the DVD drive cleaning kits that are available.

MacBook Pro won't read DVD+R DL Discs

Hi, I have a MacBook Pro, previous model not current, and I am trying to create a DVD using iDVD, the file is big, so I have to choose to burn on a DL disc, the disc burns great, no errors, but it will not play on my MBP. Why is this, that I can burn them, but I can't play them?

Today I got the same problem: I burnt a DVD+R with iTunes. It went alright. No error message. Then I ejected the DVD and inserted it again. The DVD drive ran a while with different speeds. Then it gave up and ejected the DVD without any error message.
Thereafter I did this a second time with the same result.
Then I used a Burn Folder, compiled the albums manually and burnt the DVD via Finder. Same result!
Then I started SimplyBurns, compiled the albums once more manually and burnt another DVD.
Guess what! Now the DVD was recognized by the MacBook Pro.
And when I tried the other 3 DVDs they were all recognized now!
Strange, isn't it?
Anyone, who has an explanation for this?

New i5 MacBook Pro won't read or play certain DVD's

Just got a new i5 MBP and it won't read certain DVD's that I put in. It tries to read them but then spits them back out after a few seconds. Any thoughts?

If you talking about movies, It might be a simple case of region. The first time you insert a DVD movie your mac asks for your region and you can only play DVD movies from the region you selected. If i'm not mistaken, VLC might not have these restriction and will play any region formated DVD movies.
You have the ability to change the region that you've selected but be careful cause you can only change it an x amount of times.
If you talking about regular burned DVD than it might simply be a problem with the disk itself. You should test them out on another machine to determine if your MBP has an issue with its super drive.
Hope this helps.

MacBook Pro Won't Boot from Leopard DVD

My brother's MacBook Pro (2009 13") won't boot from the Leopard install DVD. Here is what happened:
- I tried to do Bootcamp on it. I installed Windows 7 but realized that there were no Bootcamp drivers for that.
- Deleted Widnows 7 and put the XP install disc in. Somehow, it formatted my Mac partition instead of my Windows partition.
- Now that the MBP was only running Windows XP, I connected it to my iMac in target disk mode and wiped it (GUID, one Mac OS Extended (Journaled) partition).
- I tried to put the Leopard (10.5.0) install DVD in there so I can restore from the Time Machine backup, and it sees it when I hold option at bootup but refuses to boot from it.
- I reset the PRAM and tried again, no luck.
What is going on here? Does it have to do with the fact that it was doing Bootcamp? I either want to boot from the disc or somehow restore from Time Machine some other way. I can use another computer (my iMac) if I need to.

Haha yeah, I posted right before. The thing I'm wondering now: Does this mean that a Mac that came with Lion cannot be downgraded to Snow Leopard? Well, I'll save it for another question if I ever cross that bridge.
Limnos wrote:
Just so we know, this is the original OS disc that came with this computer? Even if you're trying to use a retail installer disc I am not sure those came out the the sufficient sub-version required to boot the computer (I think it needs at least 10.5.7 but don't have the specifics of your model).
Edit: I guess I'm a slow typist.

Macbook pro won't read windows 7 DVD

Similar Messages

Maybe you are looking for