Macbook pro won't restart after time machine install on new hard drive

I installed a new 500 GB HD on my 13-inch mid 2010 Macbook Pro (since the original crashed). I successfully connected to the Disk Utility via the internet connection and started recovery from a recent Time Machine backup....but, the computer will not restart. It's been stuck in the grey screen with the Apple logo and rotating status bar all night. I shut it down and restarted, but it won't go past the grey screen state. I can't find any answers on the Support Page. Help. Any one else have this issue? Should I have first installed the Lion OS X first and then restored from the Time Machine backup?
Also, wondering if all my programs (2011 ILife & IWork and Microsoft Office) will be reinstalled with the back up? (I can't find my installation disks for ILife and IWork :-()

Time machine is easy to set up and theoreticaly recover from. There have been reports of problems when a different disk or computer is used.
https://discussions.apple.com/search.jspa?peopleEnabled=true&userID=&containerTy pe=&container=&spotlight=true&q=time+machine
For future reference you may wish to learn about and use cloning of the HDD. I use both CCC and SD to do this and consider it to be the most reliable way to back up and recover.
Carbon Copy Cloner - Home
www.bombich.com/
SuperDuper!
www.shirt-pocket.com/SuperDuper/
added a good reference
http://Pondini.org/TM/Home.html

Similar Messages

The hard drive for my MacBook Pro recently crashed. I purchased and installed a new hard drive (i.e. Samsung SSD). However, when I try to re-install the Mac's operating system, I come to the part of the installation instructions where you asked to selec

The hard drive for my MacBook Pro recently crashed. I purchased and installed a new hard drive (i.e. a Samsung SSD). When I try to re-install the Mac operating system, I come to the part of the installation instructions where you are asked to choose a disk to install the software. However, there is no disk listed in the selection screen. Why is there no disk in the selection screen?

Welcome to Apple Support Communities
You haven't formatted the SSD, so you can't install Mac OS X.
First, close the OS X installer and open Disk Utility. Then, choose the SSD at the top of the sidebar, go to Erase tab, choose "Mac OS Extended (Journaled)" as "Format", and press Erase. Finally, close Disk Utility and reinstall OS X. See > http://pondini.org/OSX/DU1.html

MacBook Pro won't book after Time Machine restore

I have a late 2010 MacBook Pro that had 4 bad blocks on the hard drive. I reformatted and zeroed out the drive and then restored from a Time Machine backup which was Mac OS 10.6.6. Now the MBP won't boot. I get the Apple logo and the spinning gear, and that's it. I gave it as long as 20 minutes but no boot. Starting from the DVD shows I have that system on the drive in Startup Disk. I've run myriad utilities including Disk Utility and Disk Warrior and everything is fine.
Before I reinstall 10.6, I thought I'd poke my head in here and tap the collective wisdom.

Your situation sounds a bit similar to mine except you had the gray screen before you did anything, which to me means you had a problem that already surfaced, where I did not. I don't know if the Windoze partition has anything to do with it, but if you are running SN 10.6 you can try the same solution I did. Boot from the SN DVD and install a new version of SN over you old. Don't worry, all your files will be there. The installer is intelligent enough to realize you already have SN and will do the install over your old system files only. This is the 'new' Archive and Install scenario that existed on previous versions of Mac OS X install DVDs.
You will then have to run updates to get the system back to whatever version you were running previously.
This is what I did and it worked fine, altho it was more time consuming than I wanted.
J D Thomas
ThomaStudios

All applications were "?" On the dashboard after time machine restore to new hard drive...what went wrong?

Hi folks
I used the cmd R option on booting the MBP and did a disk scan and it reported errors that could not be fixed/repaired.
So I opted to install a brand new 1Tbyte Seagate hybrid hard drive and restore from my time machine backup.
So I installed the new drive in the MBP...it stated that it needed to restore from the internet and I was treated with a rotating globe for about 10 minutes.
It then gave the normal restore options and I opened to format the new drive as a mac drive etc...
Selected the most recent TM backup from USB drive and pointed it to the new formatted HD in the MBP.
So far so good I thought....it said it was restoring....
waited about 4.5 hours and apparently it completed when I was out so I did not see any messages just a normal looking mavericks desktop BUT with "?" In the dashboard where all the applications icons should be?????
I assume something went wrong somewhere so I reinstalled the old HD and restarted TM and it's not starting to backup all 493Gbyte of disk whichI. Understand is normal after a full restore.
So...what to do now??? I'll wait for the 7 odd hours of TM to complete but how best should I proceed with the new HD etc...should I reinstall and copy mavericks to it from a memory stick and then attempt a new restore from the recent TMS backup? Or will this cause issues....
I also have an Inateck hard drive cloning device (brand new never used) so I had wondered if I should simply install the old drive and new drives into this and start the cloning mechanism? OR will this simply clone the errors that were reported on the old drive when it was in the MBP?
In short I'm not sure what to do for the best now and would welcome helpful suggestions as to how to proceed.
thanks
Nick

<<<<UPDATE>>>>
If at first you don't succeed...
Last night after the new 493 Gbyte time machine completed. I once again installed the new drive and restarted the MBP ...waited 10 min for the internet to download the basic disk utilities...restarted the restore from TM and waited 6 hours...Happy days it worked perfectly and like a rocket...the old disk had a read write speed of approx 50-60 Mb/s the new one (hybrid drive) measures at 100-110 Mb/s...programmes open and close noticeably faster and it's better than when the MBP was new...
Apparently this new hybrid drive "learns" frequently used programmes and caches parts that improves start up time etc as time progresses etc...the MBP now starts from cold boot in less than 1 minute compared to 2 plus before...I know minutes should not really matter but it does improve the user experience. I should add I have 16G of RAM installed which does make a difference with Photoshop and Aperture etc.
Hope this helps others or at least encourages people to try hybrid drives over the much more expensive SSD option.

My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help?

My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help

Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

My daughter's MacBook Pro was doing exactly the same thing. I don't know if it had anything to do with the latest update. She called me about a week ago saying that her MacBook began running slower by the day . She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning. I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive. She took it to the Apple store. Originally, they also thought it was the hard drive. It ended up being a corrupted operating system (Lion). Apple genius simply re-installed Lion and she's back up and running. Good thing she backed up right before it crapped out. She'll be restoring everything tonight. Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

HT4413 When migrating from time machine to my new hard drive, only some files and applications and setting are transferred, not all of them. In my latest back up I have them all. How can I fix that?

When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.

sohs wrote:
When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.
If you want to use Time Machine to recover the contents of one of its a backups to a new drive, follow the instructions in Mac OS X 10.6: Recovering your entire system. Note that you must select the "Restore System From Backup" option from the Utilities menu of the Installer disc to do this.
Also note that if you are transferring files to a hard drive to be used with a different computer, you should use Migration Assistant instead. This intentionally will not copy everything because some settings, applications, etc. are not compatible computer-to-computer. Migration Assistant will copy everything that is.

HT201250 When migrating from time machine to my new hard drive, it migrates the first back-up I made several years ago. How can I migrate the latest back-up ?

When migrating from time machine to my new hard drive, it migrates the first back-up I made several years ago. How can I migrate the latest back-up ? I need time machine to migrate the latest back-up. Should I delete the older back-ups ?

As noondaywitch says, it should use the latest backup.
Where are your backups (external HD, Time Capsule, etc.)?
It sounds like there are two separate sets, and you're not connected to the right set.

How to reinstall from time machine onto a new hard drive?

how to reinstall the system from time machine to a new hard drive?

If you are connected to the internet you can do this.
Boot your computer and immediately hold down command, option and R (three keys together). This gets you connected with internet recovery.
See this article for more directions: http://support.apple.com/kb/HT4718.
This process installs an OS on your blank drive. You can then boot from the fresh OS installation and restore from your Time Machine back up.
Note that you cannot boot from a TM back up.

HT204347 My MacBook Pro won't restart after update to lion

My Mac book pro won't restart after updating to lion ! Said problem a cured at startup press any key ! No Goodrich

Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

Using time machine to format new hard drive

Hi there, hope this is a relatively easy question!
Long story short, my macbook pro's harddrive recently decided to stop working. I will being installing a new one in the next few days. I've made a bootable USB drive with Mavericks on it, however my time machine save was a couple of months ago (yes I know, I know) completed just before I updated to Mavericks.
If I install Mavericks onto my new hard drive and then restore the pro using my time machine will it cause any problems? I would think it would just restore back to the previous OS and I'll just have to download Mavericks again? Or would you recommend using Migration Assistant instead - but from what I've read this doesn't actually bring any of your previous programmes/apps into your new hard drive?
I don't really have anything important on my hard drive so I'm not bothering with trying to recover data from it.
Thanks in advance for your help! Hopefully this means I can soon be reunited with my pro!

little_lab_rat wrote:
If I install Mavericks onto my new hard drive and then restore the pro using my time machine will it cause any problems?
Of course not. Moreover, Migration Assistant (and Setup Assistant) is designed to transfer Time Machine backups created with an older Mac OS X version, so this is not a problem.
What you can do is to restore the Time Machine backup first (hold Command and R keys while your Mac is starting up, choose the option to restore a Time Machine backup, and follow the steps), and then, download OS X Mavericks from the Mac App Store and upgrade.
Another option you have is to download the OS X Mavericks installer from the bootable USB drive and point it to install to the internal hard drive. Then, during its setup, it will ask you to transfer your files from a backup.
little_lab_rat wrote:
Or would you recommend using Migration Assistant instead - but from what I've read this doesn't actually bring any of your previous programmes/apps into your new hard drive?
If I were you, I would choose the second option I gave you. That option allows you to choose what files you want to restore, so you will have a cleaner OS X copy that may improve performance, and it takes less time than the first option. Also, there's no risk, because in the first option, the Mavericks upgrade may fail.

Time Machine Backup to New Hard Drive

So, I bought a new 1TB hard drive. Now, I only need to backup SOME applications and some music and photos. Can I choose which applications I want to backup with Time Machine? And if so, how do I do it, do I just back it up, replace the hard drives and put the Mac OS X disk in and back up, right?

Scofield94941 wrote:
Thank you for your help. I understand. But my OS X started to be very slow after I installed Parallel Desktop and it remains slow even after I uninstalled it, that's why I wanted to restore my new hard drive like Parallel Desktop was never installed.
Then exclude only the Parallels file(s), which most users do anyway, and back them up separately.
See the pink box in #11 of [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum) for the consequences of omitting system folders and/or apps.

Time Machine restore on new Hard Drive and now my login password not working

I just had a new hard drive installed and they put in a clean version of 10.6.
I got home and used my TIme Machine to restore from my other computer. It finished, but now I am locked out, bacause its not accepting my password. I know its my password, the hint is the same as I have always had. It just won't work,
Since the repair place installed the software, I don't have any other disks to boot from. Does anyone know a way to fix this or reset the computer again? I don't care if the files are lost, I can copy them over later. I just need to get past the login screen. Thanks!!

Do you have any OS disks you can boot from? If so, boot from the disk, look in Utilities, and see if there is a reset password option.

Time Machine restore to new hard drive fails

This is on a Mac Mini (Early 2009), 8GB RAM, that was running the latest version of Mavericks. This all started when the 120GB hard drive began failing. The computer was running slow so I tried to repair permissions to no avail and also to repair the disk, but Disk Utility said there was a serious error and it was not able to repair it. As it was at nearly full capacity anyway I replaced it with a new 1TB drive.
I am using an install DVD from Leopard (my Snow Leopard disc is damaged) to initiate the restore. I've erased the new hard drive and formatted Mac OS Extended (Journaled).   I'm able to select my from backups on my external drive and it will go through the entire process of copying everything back (1.5 - 2 hours long) only to give me a message at the end saying there was an error and it could not restore the files. Restart and try again. (which I have, twice). My TM backups include 6 user profiles and go back several years (and OS versions).
I suspect there is a compatibility issue between the Leopard install DVD and the TM backup which is Mavericks.   I've searched through the pondini.org site for assistance but nothing addresses this issue.   I also have an iMac (late 2009) running Mavericks. Not sure if I can do something through Target mode?
I've tried restoring the latest Mavericks backup as well as the last one I had on Mountain Lion but no luck.
Any help is appreciated. Thanks.

Well my day just went from bad to worse. Somehow I managed to erase the drive with the only copy of my backups.
I guess the good news is I get 10 points for solving the problem.

MacBook Pro won't restart after Mavericks update

I recently installed the new Mavericks update on my MacBook Pro and after downloading Pages, Keynote etc. I had to restart. When I try to restart however, the Apple logo appears with the progress bar but as soon as the bar is full it switches off.

Hello SerenAlyx
Check out the articles below to go over troubleshooting the issue of the grey bar when you are starting up your Mac. It will go over starting up in Safe mode as well as booting to your Recovery Disk to maybe reinstall OS X Mavericks.
Gray progress bar appears under Apple logo during startup
http://support.apple.com/kb/ts3148
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Regards,
-Norm G.

Macbook pro won't restart after time machine install on new hard drive

Similar Messages

Maybe you are looking for