Macbook Pro won't restart while updating 10.6.0 - 10.6.8
Hello all,
I'm having trouble updating my Macbook Pro 13 inch from 2009.
Yesterday I turned my Macbook Pro on for the first time in 2 years and I want to bring some life in it.
It still had the version 10.5.8 which I updated with a usb to 10.6.
Now I want to update my OS X version from 10.6.0 to 10.6.8. I've downloaded the files by clicking on ''software update'' through ''about my mac''.
It now asks for a reboot, so it will install the updates. However, the macbook won't restart.
I click on restart and all it does is show very short a blue screen and then I see my background with only my mouse cursor which I can still move around. All of the applications and toolbars are gone and I can wait an hour and it will still be in the same position. So I have to force the shutdown by holding the power button... And when I turn it back on, it didn't install anything.
Can someone please help me out?
Kind regards!
Manually DL and install the 10.6.8 COMBO update.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2
Similar Messages
-
My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help
Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.
-
HT204347 My MacBook Pro won't restart after update to lion
My Mac book pro won't restart after updating to lion ! Said problem a cured at startup press any key ! No Goodrich
Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.
-
CD will not eject and MacBook Pro won't restart
CD will not eject and MacBook Pro won't restart.
Do a SMC reset, that hopefully should get you booting and while booting, hold the option/alt and trackpad button down at the same time. Once a row of icons appears and if the disk hasn't ejected via the trackpad method, then press the eject key on the keyboard until it does.
Click the arrow to boot up OS X.
http://support.apple.com/kb/HT3964
If this doesn't work, then take the machine in for service. -
Macbook Pro won't startup after Update
I guess everyone has been having problems around here. But I really have no clue what to do. I did not even know there was un update until I restarted. After I did it now my macbook pro won't start up. It makes that chime noise at the beginning and then it shows the apple and the spinning thing below it and I left it for 2 hours and came back and nothing had changed.
It my computer broken? Did I do something wrong? Have I lost all my stuff? Please help!Yeah, I have had the exact same problem. it happen last friday. Also, i'm not sure if this is related or not but right before the update the computer for no reason in the middle of doing stuff it would tell me to force shut down by holding down the power button. not sure what to do. If i ship it out it will be about a 2 weeks before i get it back and if I take it in, they can't put it on the bench for about 5 days. its very frustrating and apple needs to figure something out for service.
-
Macbook won't restart while updating 10.6.0 - 10.6.8
Hello all,
I'm having trouble updating my Macbook Pro 13 inch from 2009.
Yesterday I turned my Macbook Pro on for the first time in 2 years and I want to bring some life in it.
It still had the version 10.5.8 which I updated with a usb to 10.6.
Now I want to update my OS X version from 10.6.0 to 10.6.8. I've downloaded the files by clicking on ''software update'' through ''about my mac''.
It now asks for a reboot, so it will install the updates. However, the macbook won't restart.
I click on restart and all it does is show very short a blue screen and then I see my background with only my mouse cursor which I can still move around. All of the applications and toolbars are gone and I can wait an hour and it will still be in the same position. So I have to force the shutdown by holding the power button... And when I turn it back on, it didn't install anything.
Can someone please help me out?
Kind regards!Edit
-
Macbook pro won't restart to complete software update 10.7.5
hi guys my macbook pro with retina display wont restart after i try to do software update to 10.7.5 it goes to a grey software update screen but wont do anything. i can use drop down menues but nothing is active and i cant bring up the dock. im new to mac and not great with technical terms. please guys really need your help to restart or even shutdown my computer to perform software updates.
Welcome to Apple Support Communities
Your MacBook is stuck, so hold the Power button until the MacBook turns off. Then, turn it on again and install 10.7.5 with the Combo version > http://support.apple.com/kb/DL1582?viewlocale=en_US&locale=en_US -
MacBook Pro won't restart after Mavericks update
I recently installed the new Mavericks update on my MacBook Pro and after downloading Pages, Keynote etc. I had to restart. When I try to restart however, the Apple logo appears with the progress bar but as soon as the bar is full it switches off.
Hello SerenAlyx
Check out the articles below to go over troubleshooting the issue of the grey bar when you are starting up your Mac. It will go over starting up in Safe mode as well as booting to your Recovery Disk to maybe reinstall OS X Mavericks.
Gray progress bar appears under Apple logo during startup
http://support.apple.com/kb/ts3148
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Regards,
-Norm G. -
MacBook Pro won't restart after OS update
Was prompted last night to do an OS Software update. I was running 10.8.3. I started the update and had to run out. When I returned, the screen said i needed to restart my computer to install the updates. I did, and now I can't restart/reboot past the Apple Logo and progress bar which gets to about 1/6th in progress. The computer just shuts down?? Need help please. Thanks!
Hey JamoBook Pro,
If you MacBook Pro does not startup, check out this article that will walk you through troubleshooting and resolving the issue.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My Macbook pro won't sleep while its plugged in
Hello everyone,
I bought my macbook pro few months ago. Now i'm facing sleep problem while my laptop is plugged in. I searched on internet try all stuff. but still it won't work. I does my update regularly. This is really **** small problem but its some time its make my laptop so worm. i realize few days ago. I really wanna solve this. otherwise i have format it and have to put LION again but i dn't wanna loss my all date and other setting because of this sleeping problem..
Mac detalis:
Processor 2.2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software Mac OS X Server Lion 10.7.4 (11E53)
System report
Battery Information:
Model Information:
Serial Number: D86130402XDDGDLA1
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 406
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 6610
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 6694
Health Information:
Cycle Count: 86
Condition: Normal
Battery Installed: Yes
Amperage (mA): -15
Voltage (mV): 12467
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x0085
Serial Number: 0x001f2cdd
Charging: NoTry resetting the SMC
http://support.apple.com/kb/HT3964
And reset the PRAM
http://support.apple.com/kb/PH4405 -
Macbook Pro won't sleep after updating to 10.4.11
Hi,
I just updated to 10.4.11 reluctantly from 10.4.9 as whenever I do update I always have issues...I basically just went to software update last week and updated to everything I could. I've just been reading the forums and noted that updating is not always that easy...
Well basically my computer won't sleep if the lid is left open, this is IMMENSELY annoying since I often leave my desk to work on drawings, and I don't want energy being wasted like it is at the minute. Call me picky but I just want my computer to work.
I've reseted the PRAM, (option, alt, p and r), closed all applications, etc, but no luck...
Its a 2.2ghz MacBook pro, 2GB. Thank you in advance
NealThe important thing for the future imho, is to always Repair Permissions before & after any update... seems to ward off most of these problems. Of course that is only good if the disk is Verified once in awhile.
Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
http://docs.info.apple.com/article.html?artnum=302672
About Disk Utility's Repair Disk Permissions feature...
http://docs.info.apple.com/article.html?artnum=25751
In fact I'd start with those 2 now, if that doesn't help you may need to reapply some updates by getting them directly from apple>downloads. -
Macbook pro won't restart after time machine install on new hard drive
I installed a new 500 GB HD on my 13-inch mid 2010 Macbook Pro (since the original crashed). I successfully connected to the Disk Utility via the internet connection and started recovery from a recent Time Machine backup....but, the computer will not restart. It's been stuck in the grey screen with the Apple logo and rotating status bar all night. I shut it down and restarted, but it won't go past the grey screen state. I can't find any answers on the Support Page. Help. Any one else have this issue? Should I have first installed the Lion OS X first and then restored from the Time Machine backup?
Also, wondering if all my programs (2011 ILife & IWork and Microsoft Office) will be reinstalled with the back up? (I can't find my installation disks for ILife and IWork :-()Time machine is easy to set up and theoreticaly recover from. There have been reports of problems when a different disk or computer is used.
https://discussions.apple.com/search.jspa?peopleEnabled=true&userID=&containerTy pe=&container=&spotlight=true&q=time+machine
For future reference you may wish to learn about and use cloning of the HDD. I use both CCC and SD to do this and consider it to be the most reliable way to back up and recover.
Carbon Copy Cloner - Home
www.bombich.com/
SuperDuper!
www.shirt-pocket.com/SuperDuper/
added a good reference
http://Pondini.org/TM/Home.html -
MacBook Pro won't restart after installing Lion
I have a late 2010 model MacBook Pro that I upgraded to Lion about a year ago. Ever since, I have not been able to "re-start" my computer and have to manually switch the computer off. Because of this, I cannot install firmware updates. Do I need to revert back to Snow Leopard or is there another way to fix this issue?
Thanks.
--CIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
MacBook pro won't start after update
Help my MacBook pro was doing an update when it went to restart it never came back on and seems to be stuck somewhere between sleep and on there is no lights but a faint white light on the case open button.
OK, I ran the latest update and my computer would not restart no matter what I tried. So I restored from a backup and everything was fine. Now I just did the OS update again and the SAME thing happened. Only this is a different hard drive.
There is definitely something screwy with this latest OS update and, at the very least, my model of Macbook Pro.
Apple is wrong.
I lost a week's worth of data in the crash. -
Macbook pro won't boot after update to 10.6.8
Hi everyone,
Yesterday I bought an used macbook pro (15 inch early 2008). When looking at it, it was in good shape and the previous owner just did a fresh install of snow leopard. I took it home and whas happy with it. In the first two hours of using it, everything was fine. After installing the update to 10.6.8 my macbook needed to be shut down.. After shutting down it started up again but the screen stayed black. I had no idea why. So I rebooted it by pressing the power button. The same problem remained, it seemed to start up (I could hear the harddrive and fan) but it didn't boot into Mac Os. After a couple of attempts, it now shutsdown immediatly after pressing the powerbutton (3 seconds after). No chime or nothing.
At first I thought this would only be a software problem, because the problem started immediatly after updating. So I put in my snow leopard dvd to boot into that, but I can't even get it to boot into the install dvd. Because it shuts down immediatly after pressing the power button. Then I started suspecting an hardware failure, which would be a very big coincidence to show up immediatly after booting up. These are the things I have tried so far, to no avail:
- Plugging of the power cord and removing the battery, then pressing and holding the powerbutton for at least 5 sec
- Holding the option, command, P and R keys during boot.
- Replacing the memory
- Replacing the hard drive
- Unplugging the super drive
- Starting up holding the d key
At a certain point I was hoping that It would be an harddrive or memory problem. I replaced both with examples I know for sure they are working. But still the same problem; macbook shuts down almostimmedialty after pressing the power button.
There is no warrany anymore, and technical support would cost me 49 euros per incident.. to probably hear that the macbook is beyond repair. I feel i have just thrown away 300 euro's for an nightmare experience. Does anybody now anything to try, i'm really desperate hereAfter installing the update to 10.6.8
What update was that?
So I put in my snow leopard dvd to boot into that, but I can't even get it to boot into the install dvd.
Did the previous owner also give you the discs that originally came with the computer? Those are what you need to troubleshoot with. You also need disc 1 to run the Apple Hardware Test.
There is no warrany anymore, and technical support would cost me 49 euros per incident..
Apple Store and AASP diagnostic testings are free. Suggest that you take full advantage of it. This way you can find out exactly what is wrong with your computer. Post back here with the diagnosis and someone will post DIY repair sites.
Maybe you are looking for
-
Can DW CS5 automate the creation of a link based on the text in the link?
Here's the situation. I often find myself creating blocks of code like this: <a href="home?searchString=some text"><img src="..."></a> <a href="home?searchString=some text">some text</a> Is there a quick, painless way to type the "some text" part on
-
I cannot receive files from my Buddies, I always get an error message
They can receive files I choose to share with them but when they try and share files with me and I click to download the file, it tries to download it but then an error message appears underneath the file name I am trying to download that reads "Unex
-
I am using Internet Explorer and at present using a PC laptop as my eMac has BlueScreen-itis for the moment. Wonder if anyone can assist me with the following: At the top of the Int Exp page I have two rows, first one starting with File, Edit, View,
-
Feature request: adjustable color cast removal
I've been sorting through some underwater photos I took while snorkeling, and the "Auto Levels - Separate" tool does a wonderful job of removing the aquamarine color cast. Unfortunately, it works a bit too well. It would be nice to have a slider that
-
Itunes will not accept my iphone4 after it was updated recently
i recently updated my iphone4 and now itunes on my pc will not accept it. I get the message saying itunes will have to be updated. I have tried to update, but doesn't download.