Macbook pro won't restart

Hi...
Ok here's my problem:
The Firefox and BitTorrent applications are not responding, I was gonna try 'Force quit' but the computer doesn't seem to recognize that the applications are not responding. So when I secondary click on the icons in the dock there is only the 'Quit' option and no 'Force quit' option. The 'Quit' option doesn't work (not anything else either).
Then when i downloaded some software updates yesterday the computer needed to restart, but when i clicked the 'Restart' option a window saying that the computer couldn't restart because Firefox wouldn't quit popped up...
I tried uninstalling the applications but that didn't work since they are running...
Any other ideas?
Thanks in advanse, Marcus
Message was edited by: Mausmann

Run /Applications/Utilities/Activity Monitor.
Find the processes that won't quit, select them, hit the force quit button. It should kill them without hesitation.

Similar Messages

CD will not eject and MacBook Pro won't restart

CD will not eject and MacBook Pro won't restart.

Do a SMC reset, that hopefully should get you booting and while booting, hold the option/alt and trackpad button down at the same time. Once a row of icons appears and if the disk hasn't ejected via the trackpad method, then press the eject key on the keyboard until it does.
Click the arrow to boot up OS X.
http://support.apple.com/kb/HT3964
If this doesn't work, then take the machine in for service.

My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help?

My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help

Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

HT204347 My MacBook Pro won't restart after update to lion

My Mac book pro won't restart after updating to lion ! Said problem a cured at startup press any key ! No Goodrich

Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

Macbook pro won't restart after time machine install on new hard drive

I installed a new 500 GB HD on my 13-inch mid 2010 Macbook Pro (since the original crashed). I successfully connected to the Disk Utility via the internet connection and started recovery from a recent Time Machine backup....but, the computer will not restart. It's been stuck in the grey screen with the Apple logo and rotating status bar all night. I shut it down and restarted, but it won't go past the grey screen state. I can't find any answers on the Support Page. Help. Any one else have this issue? Should I have first installed the Lion OS X first and then restored from the Time Machine backup?
Also, wondering if all my programs (2011 ILife & IWork and Microsoft Office) will be reinstalled with the back up? (I can't find my installation disks for ILife and IWork :-()

Time machine is easy to set up and theoreticaly recover from. There have been reports of problems when a different disk or computer is used.
https://discussions.apple.com/search.jspa?peopleEnabled=true&userID=&containerTy pe=&container=&spotlight=true&q=time+machine
For future reference you may wish to learn about and use cloning of the HDD. I use both CCC and SD to do this and consider it to be the most reliable way to back up and recover.
Carbon Copy Cloner - Home
www.bombich.com/
SuperDuper!
www.shirt-pocket.com/SuperDuper/
added a good reference
http://Pondini.org/TM/Home.html

Macbook Pro won't restart while updating 10.6.0 - 10.6.8

Hello all,
I'm having trouble updating my Macbook Pro 13 inch from 2009.
Yesterday I turned my Macbook Pro on for the first time in 2 years and I want to bring some life in it.
It still had the version 10.5.8 which I updated with a usb to 10.6.
Now I want to update my OS X version from 10.6.0 to 10.6.8. I've downloaded the files by clicking on ''software update'' through ''about my mac''.
It now asks for a reboot, so it will install the updates. However, the macbook won't restart.
I click on restart and all it does is show very short a blue screen and then I see my background with only my mouse cursor which I can still move around. All of the applications and toolbars are gone and I can wait an hour and it will still be in the same position. So I have to force the shutdown by holding the power button... And when I turn it back on, it didn't install anything.
Can someone please help me out?
Kind regards!

Manually DL and install the 10.6.8 COMBO update.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Macbook pro won't restart to complete software update 10.7.5

hi guys my macbook pro with retina display wont restart after i try to do software update to 10.7.5 it goes to a grey software update screen but wont do anything. i can use drop down menues but nothing is active and i cant bring up the dock. im new to mac and not great with technical terms. please guys really need your help to restart or even shutdown my computer to perform software updates.

Welcome to Apple Support Communities
Your MacBook is stuck, so hold the Power button until the MacBook turns off. Then, turn it on again and install 10.7.5 with the Combo version > http://support.apple.com/kb/DL1582?viewlocale=en_US&locale=en_US

MacBook Pro won't restart after Mavericks update

I recently installed the new Mavericks update on my MacBook Pro and after downloading Pages, Keynote etc. I had to restart. When I try to restart however, the Apple logo appears with the progress bar but as soon as the bar is full it switches off.

Hello SerenAlyx
Check out the articles below to go over troubleshooting the issue of the grey bar when you are starting up your Mac. It will go over starting up in Safe mode as well as booting to your Recovery Disk to maybe reinstall OS X Mavericks.
Gray progress bar appears under Apple logo during startup
http://support.apple.com/kb/ts3148
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Regards,
-Norm G.

MacBook Pro won't restart after OS update

Was prompted last night to do an OS Software update. I was running 10.8.3. I started the update and had to run out. When I returned, the screen said i needed to restart my computer to install the updates. I did, and now I can't restart/reboot past the Apple Logo and progress bar which gets to about 1/6th in progress. The computer just shuts down?? Need help please. Thanks!

Hey JamoBook Pro,
If you MacBook Pro does not startup, check out this article that will walk you through troubleshooting and resolving the issue.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
Thanks for using Apple Support Communities.
Regards,
-Norm G.

MacBook Pro won't restart properly after restore

I recently needed to do a restore on my MacBook Pro 15" (2008). My computer indicated that the restore was successful and to restart. When I did, I get a screen with what looks to be some type of code in the upper left and a box in the middle that tells me that I need to restart and to hold the power button down until the computer shuts down. I've done this numerous times; removed all external drives, ejected the back-up cd, taken out the battery, did a safe boot, did a boot holding down option, command P & R but nothing. Any other solutions to get this to restart properly? Thanks!!

Those are kernel panics.
Did you do a full restore from Time Machine backups?
If so, see #E8 in Time Machine - Troubleshooting
If not, please clarify.

MacBook Pro won't restart after installing Lion

I have a late 2010 model MacBook Pro that I upgraded to Lion about a year ago. Ever since, I have not been able to "re-start" my computer and have to manually switch the computer off. Because of this, I cannot install firmware updates. Do I need to revert back to Snow Leopard or is there another way to fix this issue?
Thanks.
--C

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

MacBook Pro won't restart, shutdown or logout once in a while.

From time to time I want to restart my computer and when I do it it doesn't restart. I even try to shutdown or logout and it doesn't do it as well. I have to hold down the power button to shut it down completely. Why is my computer behaving like this once in a while?

The most likely explanations are:
1) something that it is connected to - a network (even just another computer on occasion) , or a USB or FW peripheral (printer, hub, external drive, memory stick etc that doesn't fully comply with the relevant USB or FW protocols ).
2) Background software that runs at such a time -= maybe a virus checker, drive scanner, etc etc.
Cheers
Rod

My Macbook Pro won't boot up, only in safe mode!

Help, my macbook pro won't restart, only in safe mode! and it seems that safe mode has plenty of implications for use. my usb memory stick doesn't seem to be recognized while in safe mode. I was doing a cleanup on mackeeper just after I downloaded a trial version of microsoft office mac. The trial wouldn't work properly so I deleted it and decided to do a cleanup with mackeeper. than the mac froze while mackeeper was doing it's cleanup and the screen flashed black a few times. Ever since it won't boot up unless I use safe mode. Also, I downloaded the most recent updates while in safe mode but it doesn't seem to be recognizing that I already downloaded them because software update is still telling me that I have 6 updates. So I am horribly confused at this point. Please help, I need this laptop to do report cards (it's a good thing I got an extension). thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
You can then quit Terminal.

MacBook Pro won't start after I completed my first backup using TimeMachine

Hello,
My MacBook Pro won't restart after I did my first TimeMachine backup. I tried in SafeMode but no luck. My MacBook Pro is a 2009 early version running Snow Leopard. Please help.
Thanks,
Serey

I have managed to get into my computer through the OS X install disk but now my wi fi hardware is gone. Ie no airport.
When I try to re install the airport extreme wi fi base station software it tells me it can't be installed as this version of Mac OS X (Lion) on is volume is not supported.
Not even an Ethernet cable gets me on line. In system preferences when I do a network diagnostic all I get is the spinning disk. Again, any ideas how to get around this?
Thanks

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Macbook pro won't restart

Similar Messages

Maybe you are looking for