MacBook Pro won't run after sleep

After closing the lid it goest to sleep. But when I come back to turn it on I find that the light indicator is on and solid. And when I open the lid nothing will work, screen, keyboard light, volume, even the power button. The only solution I found for this is to hold the power button for about 5 sec then it will be force shutdown then turning the laptop again.
Does anybody know the solution for this?!

I am having the same problem. MacBook Pro will not enter sleep mode (white LED does not pulse but remains steady) and will not "wake up". I end up restarting with the power button. I have verified and repaired hard drive with disc utility. I have also searched for firmware updates; only one available that may be an answer (MacBook Pro EFIU Update version 1.9) is not comaptible with my computer. would appreciate any other ideas anyone may have to solve this problem.

Similar Messages

Macbook Pro won't login after sleep (sleep with low battery -- mac turned off maybe it's called save sleep)

Macbook Pro won't login after sleep (sleep with low battery --> mac turned off maybe it's called save sleep)
So if I hit the powerbutton my mbp booted like it is booting from the save sleep (so very fast and the login screen is there in about 10 sec.and there is no apple logo while booting just the desktop screen in "unsharp" ore foggy however...)
Then when i see the login (if the keyboard backlight turned on) i wand do tipe in my code but it won't work... the trackpad is not working; and when i plug-in a usb mouse the mbp is not powering on the usb-mouse (laser is off)
Why is that this way?
Is there n option to wake up the mbp fromm deep/save sleep without haveing issiues after that?
THX

Sorry for such a long delayed response...
I was able to get to an apple store this past weekend, and let me tell you... I'm about finished with there great "support".
Right before I went to the store, I tried to eject a disk. Well the cloth in the SuperDrive (I assume to protect the drive from dust and such) Pulled up with my disk. So I get the Apple store, describe my problem and what happened with the cloth piece. The "Genius" writes up a form and tells me they have to run diagnostic and it will take a couple days... and I will get a call when its done (1-3 days).
Well on day number 3 I called up the store and they told me it was ready to be picked up? I asked if anything had been fixed and they told me they could not reproduce my "sleep issue", so they couldn't fix that.. but told me the cloth piece in the SuperDrive had been fixed.
I drive an hour (one way) to the Apple store to find that all they did was PULLED OUT the cloth... they did not replace it! So basically I have a hole for a Super Drive.
I asked why I was not called to say that my computer was ready to be picked up... didn't get an answer on that one.
I asked why my SuperDrive was said to be fixed, when nothing was done... they told me that it would have to be sent out to the factory store for that to be fixed (FIRST TIME THEY MENTIONED THAT!) Oh, and that would take 5-7 business days. Well that's not going to happen right now considering I'm a college student that NEEDS a working computer!
So I go home, angry... start just putting all my important documents back on the computer. And the screen starts blinking!!!! I guess now I have the same thing described in another post on these forms...
Lets just say that I'm not very happy with Apple right now! If anybody else has success on either the sleep issue or the screen blinking issue, please let me know!
Thank you!

My MacBook Pro won't go to sleep when I close it

1. My MacBook Pro won't go to sleep when I close it and my fan runs all the time. When I go to my activity monitor it show my mail program runing at between 98% and 153% of CPU. I've called Apple Service and they can't help. HELP!

My Mac Book Pro does not go to sleep (the light on front stays steady) when I close the lid, unless I turn off the charger.

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

My daughter's MacBook Pro was doing exactly the same thing. I don't know if it had anything to do with the latest update. She called me about a week ago saying that her MacBook began running slower by the day . She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning. I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive. She took it to the Apple store. Originally, they also thought it was the hard drive. It ended up being a corrupted operating system (Lion). Apple genius simply re-installed Lion and she's back up and running. Good thing she backed up right before it crapped out. She'll be restoring everything tonight. Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

MacBook Pro won't start after I completed my first backup using TimeMachine

Hello,
My MacBook Pro won't restart after I did my first TimeMachine backup. I tried in SafeMode but no luck. My MacBook Pro is a 2009 early version running Snow Leopard. Please help.
Thanks,
Serey

I have managed to get into my computer through the OS X install disk but now my wi fi hardware is gone. Ie no airport.
When I try to re install the airport extreme wi fi base station software it tells me it can't be installed as this version of Mac OS X (Lion) on is volume is not supported.
Not even an Ethernet cable gets me on line. In system preferences when I do a network diagnostic all I get is the spinning disk. Again, any ideas how to get around this?
Thanks

Why is my Macbook Pro slow to wake after sleep?

Why is my Macbook Pro slow to wake after sleep?

I am having the same issue. I hook it up to the charger in the evening and close the lid. When I go to use it the next time it takes a good 30 seconds or so to wake up. The screen shows the log in screen but typing doesn't work and the cursor is frozen. Sometimes it will even give the rainbow wheel for the cursor, so it seem like it is processing whatever to get going. I also notice that my battery won't be fully charged at anywhere from 95%-99% after being charged a full evening. What can I do to change whatever is happening because it is pretty crappy to charge it all night expecting to have a full battery for the next use, plus the issue of having to sit there waiting for it to boot every time.

OSX 8.2 new Retina Macbook Pro won't wake from sleep.

Since upgrade to OSX 8.2 new Retina Macbook Pro won't wake from sleep. Tablet lights are on in morning and fans running like crazy, but it requires hard quit and start. Tried with no apps running, no change. It was fine before this last update. Wasn't the recent firmware update supposed to fix this issue? It seems to have started one for me.

I have the exact same problem with my Macbook Pro OS 10.8.4. What happens is: I work on the train, press cmd/alt + eject to put to sleep..pop it in my bag...get home or office... open the lid...and nothing! Battery indicator shows I have plenty of juice but it will not wake up no matter what key I press.
The only difference between use on the train and home/office is the plugging in of peripherals and mains power. It happens sparadicially, perhaps once or twice a week and I always send a 'panic report', so somewhere there will be approx 20 reports of this fault at Apple.

My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help?

My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help

Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

MacBook Pro won't wake from sleep after installing Snow Leopard

If my MacBook Pro is running while closed with an external display and I unplug it from the display it goes to sleep - as indicated by the white light and the front pulsing. If I then open the MacBook the display remains blank and it is completely unresponsive to any keys or track pad input.
The only thing it responds to at that point is holding the power button down until it powers down and then restarting - loosing all work in progress at that point.
Before installing Snow Leopard the Mac would wake reliably when opened from this state.

Mike Doolin wrote:
I think I may have found the fix for this. My MacBook Pro was dying in its sleep every time (after installing Snow Leopard), whether it went to sleep automatically or I used a Hot Corner. I went into System Preferences>Desktop & Screen Saver and changed the screen saver to Flurry, and it works now. I had had it set to a folder containing a single .pct file that I had created.
Good advice Mike! When in doubt check the ScreenSaver settings.
Definitely seems that it has a problem with that pic... In my case, selecting any images instead of the default setting (no screensaver) seems to have cured my non waking issue on my early Macbook Pro in Snow Leopard.
My original problem was that no amount of trackpad input woke it, but the space bar did. The space bar seemed to wake it up with the previous Screen Saver setting. Now trackpad wakes it up (even from total sleep as well as screen saver), too. Might be nice to know about if this is an intended 'feature' as a security trick. Otherwise I consider this a bug.
My vote is that it's a bug.

My macbook pro won't go to sleep when I close the lid

I've been having this problem for a couple of years now, and it's getting pretty annoying.
I got this MacBook Pro in April of 2011. Otherwise, it works great. It goes to sleep when I go up to the apple menu and select "sleep." BUT, when I close the lid, it stays on. Heaven forbid I don't have it plugged in, because then the battery will be shot! It also won't go to sleep automatically when I leave it for a long time. Yet another potential battery drain.
How do I fix it so that it goes to sleep automatically when I close the lid and when I leave it alone for a while?
In Energy Saver, I have checked all the boxes necessary: "Put the hard disk(s) to sleep when possible" "Wake for network access" and "Automatically reduce brightness before display goes to sleep."
Am I missing something here, or does my computer just have a defect?

I had the same issue.
I used an external monitor but all of a sudden when I closed the lid my Macbook Pro did not go to sleep!
I solved the problem with a SMC reset.
Try to do it...

MacBook Pro Won't Boot after Firmware Update

So I just upgraded to a MacBook Pro which came in the mail yesterday. I removed the Apple-installed HD and swapped it out for a bigger, faster HD. I installed OS X from scratch, imported everything from my Time Machine backup during the Setup Assistant, and then started installing updates. Everything was running swimmingly until the last updates.
What happened is when I rebooted my MacBook Pro and logged in after a series of updates, I got presented with both a Bluetooth update and a Firmware update at the same time. Both required a restart so I thought I would kill two birds with one stone. I installed the Bluetooth update, and then when it asked to reset I installed the Firmware update instead. However, the firmware update didn't behave as advertised because instead of shutting the MacBook Pro completely down, it restarted and then started installing the firmware update.
Ever since the firmware update (which I think installed correctly but don't know how to verify), I cannot boot my MacBook Pro. Using the OS X install DVD I can view my firmware version using System Profiler, and the number it is reporting is MBP53.00A.B03.
I have tried booting in verbose mode to try and get a feel for the problem, and it eventually hangs on an infinite loop saying something about not being able to find something on disk0s2.
I also thought I would fix the problem by doing an Archive and Install, but it quit at the very beginning of installing with the error "unknown error".
Also I thought I would format the disk with Disk Utility and then try installing again, but Disk Utility reports that it in unable to unmount the volume.
Any help you can provide would be greatly appreciated. Thanks!
-- Update --
Remember how I'm unable to unmount the drive? I force unmounted it and then used Disk Utility to repair the volume, but still no luck.
I think the key to the problem is this new HD I put in runs at 3 Gbps. I think I read somewhere that the new MacBook Pro's don't support that.
I think next I should try swapping out the new HD in my MacBook Pro with the one it originally came with. What do you think?

I, too, have a brand new MBP 15" that I put an Intel X25 in. At the 1.5 (Prior to Firmware Update) setting, it worked fine. I rant the Firmware Update, all looked fine, but the drive is no longer able to be seen.
Flash the PRAM, per other suggestions to no avail. Boot off of the DVD and disk utility nor Profiler sees the drive.
Replace the drive with the stock that came with the MBP (which I had never even used) and it works.
Put the Intel X25 into a Windows machine and it works fine. Reformatted it (in windows) and put it back into my MBP. Still not able to see it (from the Disk utility after booting off the DVD).
Intel's firmware for the drive says its up-to-date (new drive) and if I attempt to "re-run" the Mac Firmware Update, it says that the machine is already up-to-date.
Seems odd that it worked before an now it doesn't. Also seems odd that the X25 works in other machines. And that my MBP works just fine with the stock Hitachi 7200 320GB drive.
Ideas? Intel says to call Apple Support. Not sure what I can say to them.

17" MacBook Pro won't run on AC power

Ok, this is a unique situation and I have searched the forums and can't find an answer, my early MacBook pro will not run on straight AC power, it will power up and run on battery power and the battery WILL charge while the machine is powered OFF but will not charge while the machine is on, so anybody have a solution?
Will run on battery power, will not run with battery removed on AC Only, battery will charge with AC adapter ONLY when machine is powered down, will NOT charge when machine is on.
Thanks for your help

Ok, booted into safe mode still same results , won't run on AC power, turn unit off light turns orange on power adapter and battery charges as normal, AC adapter plugged in light is green not charging while unit in on and will not run with battery removed, if I remove MagSafe it intermittently turns orange then back to green....Still perplexed as machine knows AC adapters connected and will charge but will not power or charge when unit is on.

Macbook Pro won't startup after Update

I guess everyone has been having problems around here. But I really have no clue what to do. I did not even know there was un update until I restarted. After I did it now my macbook pro won't start up. It makes that chime noise at the beginning and then it shows the apple and the spinning thing below it and I left it for 2 hours and came back and nothing had changed.
It my computer broken? Did I do something wrong? Have I lost all my stuff? Please help!

Yeah, I have had the exact same problem. it happen last friday. Also, i'm not sure if this is related or not but right before the update the computer for no reason in the middle of doing stuff it would tell me to force shut down by holding down the power button. not sure what to do. If i ship it out it will be about a 2 weeks before i get it back and if I take it in, they can't put it on the bench for about 5 days. its very frustrating and apple needs to figure something out for service.

Macbook Pro won't startup after 10.9.1 update

Early 2013 Macbook Pro 13" retina running Mavericks.
Installed the 10.9.1 update and left it to do that and when I returned it had restarted in Bootcamp in Windows 8.1
Requested in Windows that it startup in OSX. On starting up OSX a message came up saying there was a problem starting.
It tries to startup a couple of times then a circle with a line though it comes up and it goes no further.
Tried booting into recovery mode to check permissions etc. in disc utility but that's not coming up either.
Any suggestions on what else to try?

Chose startup disk manually:
Hold the Command button during startup, then select your macintosh partition.
Reset the nvram:
Turn on your mac while holding Command-Option-P-R until the chime sounds for the second time.
Safe boot:
Boot while holding down the RIGHT shift button.
If you have a Time Machine, you can use that to restore.
Reinstall via recovery:
Hold down Command-R during boot, then hit reinstall in the menu.
Other than that, you'll have to go to a Genius Bar.
Hope this helps!

MacBook Pro won't run after sleep

Similar Messages

Maybe you are looking for