Macbook Pro won't see CD as boot option

I have tried using two different OS install disks but the computer won't see the disks as a startup option. I have tried booting by pressing the option key after the tone and the C key. I have gone in through system prefs to choose the CD to boot from but it doen'st show up there. The disks do show up on my desktop and I can open the folder etc... Also, I can use the drive for watching movies and stuff. I have no idea why this won't work and it's honestly driving me up the wall.
The OS is 10.6.8 and I have tried the install disk for OSX Tiger and OSX Mountain Lion (I think). One is black and one is gray if that helps.
The orginal problem is resetting my admin password because I cannot figure out what I put in originally. Please be clear, I did not steal this Mac. I just don't remember what I put in and my hint makes no sense.
I have called Apple support but they want 50 bucks to talk to me and I can't see paying that. Honestly the request itself ****** me off.
I don't know what else to include but there you go....help?

SachaRathe wrote:
I don't have that disk and all online forums including ones on this site say to use the disk closest to your OS and you'll be fine. There has got to be a way to fix my issue without paying a bunch of money.
Why not?
Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

Similar Messages

  • Macbook pro won't wake up when booted into Windows 7

    Macbook Pro (Late 2010) with Snow Leopard and Windows 7 64bit. Bootcamp 3.3
    When booted into OS X, then close the lid, let the machine sleep and later, if I connect to power source and USB keyboard and mouse, and then tap keyboard, machine wakes up.
    If booted into Windows 7, if I follow same sequence, the machine won't wake up. The only way I can wake the machine up is by opening the lid.
    Not a big problem, but certainly an annoyance.
    Can anybody help?

    Did you use a geniune windows installation disc? I ask this because I worked on a computer today where someone had tried to use a Windows XP disc that came with a Dell computer. These do not work.
    If it was a genuine install disc, did you get all the way through with the installation, or did something go wrong during the install?

  • Macbook Pro won't finish loading after boot and password

    Right after I installed McAfee Virus Scanner for Mac and restarted my laptop it won't load all the way after I put in my pasword. It's stuck on the space screen that comes pre-installed, right before my desktop appears. I went into safe mode and dragged the new application into the trash and did the disk utitlity. It finished an it says the disk is ok. The battery is charged. Is there something else I need to fix? What is going on?

    You have a hardware failure. Could be the drive itself or as has happened on a lot of 2009 model MBPs the cable that goes from the drive to the logic board has failed.
    For either you will be better off taking it into an Apple G Bar and having it looked at. Note to the Apple staff that it may be the cable and not the drive.
    If you are in the mood to test it yourself then remove the drive from inside the case and connect it to the system with a SATA to USB adapter and at stratup hold down the Option key and select the USB connected drive as the Boot Source. If the system boots off the drive then it is the cable. If it doesn't boot off the drive or the drive isn't even listed as a boot source then the drive has failed. Whichever one it is, Replace that part.

  • MacBook Pro won't see jpg files while browsing Samsung phone via bluetooth

    I have been searching the forums for at least an hour or two and cannot find an answer. I have a Samsung SGH -A767, and when I "Browse Device" I cannot see the jpgs on my phone. Both are turned on and discoverable, and connect fine. I can send files from my Macbook to my phone with no problem, I can send individual files from my phone to my macbook with no problem when sent using the phone's controls. When I "browse" my phone's file folders, however, I can see the folders and the audio files within, but I cannot see the hundreds of .jpg's I have taken with my phone. I DO see, however, only three jpgs -- the three .jpg's that I have sent over from the macbook.
    Please help! I take a lot of pics with my phone and I dont want to have to send each file over individually one by one, that will take hours!
    Thanks in advance!

    Here is the solution... Despite my faith in online support, apple's one really works!
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8215.html

  • MacBook Pro won't see printer to add.

    Hi how frustratibg is this
    I have a 7520 and used to be able to print and scan wirelessly
    Now I cant
    Things that have changed:
    New router (Virgin Media Super HUB 2 - Dual band) network set up with same settings
    As teh printer failed to install I uninstaled the driver and utility and reinstalled - HP-Inkjet-SW-OSX-Mavericks_v12.34.44.dmg
    The printer is connected to the network but the set up does not find it so I have to connect via IPv4 but this means I can not scan.
    When I go to add a printer with the + it does not show any online printers.
    Please help as I would like to scan to my PC over wireless.

    Hi @Flipperflopper7 
    The issue may be related to the new router. Since the router is dual band, the router may be broadcasting on the 5ghz frequency, the printer works on a 2.4ghz frequency only. If the router is on the 5ghz or is set to dual band, it would be a good idea to disable the 5ghz.
    If the issue persists, let's try Pinging the Printer and testing the connection, click on the link below:
    How to Ping on Mac OS
    Also, please take a look at the list of ports below;
    Incoming ports (UDP) are destination ports on the computer while outgoing ports (TCP) are destination ports on the HP printer.
    • Incoming (UDP) ports: 137, 138, 161, 427
    • Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500
     The ports are used for the following functions:
    Printing
    UDP ports: 427, 137, 161
    TCP port: 9100
    Photo card upload
    UDP ports: 137, 138, 427
    TCP port: 139
    Scanning
    UDP port: 427
    TCP ports: 9220, 9500
    HP device status
    UDP port: 161
    Faxing
    UDP port: 427
    TCP port: 9220
    HP device installation
    UDP port: 427
    Web Services Ports
    UDP and TCP: 80, 443, 5222, and 5223
    Bonjour Ports
    UDP and TCP: 5353, 5297, and 5298
    - Source
    You may need to contact the router company to ensure the ports are open.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

    My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

    Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
    Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
    Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
    Quit and you should be able to install OS X now with your Apple ID and password.
    see
    http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

  • My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Macbook Pro won't boot or show partition

    I have my macbook pro partitioned with leopard and tiger (for protools) . I also have a copy of leopard on an external hard drive that I boot to occasionally. While on this external drive I had to do a manual shutdown after it froze and now my macbook pro won't show the internal drive partition with leopard on it. It will only boot to the internal partition with tiger on it. Even though I can see the leopard partition on the desktop and access it through tiger it is still not showing up in startup disk. I held the option key during startup and it gave me the choice to choose the leopard partition but after it started to go through booting it would then shut down.
    Any suggestions?
    I ran disk permissions and repair but its said everything is okay.

    I would try Diskwarrior 4.1 and see if that can repair the drive.
    btw how did you get Tiger on your Macbook Pro?
    My Tiger install DVD will not install on my Macbook pro even though it is a 3.1 version machine.
    I need to run Protools as well.

  • HT1379 Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

    Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

    Hold shift key down while booting should get you in
    go through this list and get back with me
    Step by Step to fix your Mac

  • My Macbook Pro won't boot up, only in safe mode!

    Help, my macbook pro won't restart, only in safe mode! and it seems that safe mode has plenty of implications for use.  my usb memory stick doesn't seem to be recognized while in safe mode.  I was doing a cleanup on mackeeper just after I downloaded a trial version of microsoft office mac.  The trial wouldn't work properly so I deleted it and decided to do a cleanup with mackeeper.  than the mac froze while mackeeper was doing it's cleanup and the screen flashed black a few times.  Ever since it won't boot up unless I use safe mode.  Also, I downloaded the most recent updates while in safe mode but it doesn't seem to be recognizing that I already downloaded them because software update is still telling me that I have 6 updates.  So I am horribly confused at this point.  Please help, I need this laptop to do report cards (it's a good thing I got an extension). thanks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in safe mode.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
    find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 3
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
    You can then quit Terminal.

  • MacBook Pro won't boot at start.  I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

    MacBook Pro won't boot at start.  I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

    Read this article...
    http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US

  • Macbook pro won't boot - how do I retrieve emails?

    Hey guys
    I've got a common problem that my Macbook pro won't boot. Sometimes I get stuck on the grey screen with spinning wheel, sometimes on the blue screen with spinning wheel
    I've scoured the internet on another machine and tried every trick I can find with the MacBook Pro including
    Disk / Permissions repair from install disk (says the HD is fine)
    PRAM
    Single User
    Soft
    It seems like my only option at the moment is an Install and Archive. I can mount the MacBook Pro on another machine with a firewire and remove files and backed up a lot on a hard drive before it died
    What I am worried about is how to retrieve some emails from the machine that only exist locally because I have deleted them from the server
    Is there a way of doing that?
    Would Migration Assistant work?
    If anyone could help me with this or suggest any other methods for bring my machine out of a coma I'd really appreciate it
    d

    Try a different adapter. If you don't have access to a known-good adapter any other way, make a Genius Bar appointment at an Apple Store.

  • Macbook pro won't boot, stuck on white apple screen

    Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
    I've powered down and tried to boot up several times.
    I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.

    Exacty what happens when you try to boot up from the disc that came with your computer?  Are you holding down the c key?  Have you tried holding down the "option key?"  Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
    Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer.  Now reboot.
    If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again.  If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up.  At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver. 
    If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
    If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode. 
    If the Mac starts up correctly, restart without pressing the "shift" key.
    If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
    If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    (If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    Remove any 3rd party ram.
    Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
    If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems.  It's what you're paying them for.
    Out of warranty - take the computer to an Apple store or an AASP.  Whichever is more convenient for you.

  • MacBook pro won't boot up Keeps turning off

    MacBook pro won't boot up.  When power button pressed the white screen w apple comes on w progress bar but shuts off before bar completed. If I move cursor or hit buttons it boots but will turn off if cursor stops Moving or stop pushing buttons.  Just started happening.   Ran hardware test and all shows ok.  Any ideas??

    Thanks for all the help; however, I still continue to have problems booting off of any other media.
    I've tried the Apple CD w/ no success - I made an image of the apple cd and restored it to a USB drive, and it won't boot. I've tested both methods on another mac, and both options boot fine.
    I'm going with my last restort here and am going to install OSX on a portable USB HD, and try to boot off of that (no clue if it will work given the outcomes of the other things I have tried). From there I'm going to backup the HD, and try DW as suggested.
    Any thoughts as to why the mac refuses to boot off of any other media? It always boots halfway and then tells me I need to shutdown my mac.
    Thanks again,

  • Macbook pro won't boot after installing update 10.9.3

    macbook pro won't boot after installing update 10.9.3

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for