MacBook Pro Won't Sleep on Reserve Battery Power

Hello fellow mac-users and mac-geeks,
My Macbook Pro 2007 (2.2 GHz, Santa Rosa) was recently repaired by apple. The logic board was replaced due to the Nvidia issue. (If you don't know what that is, take a look in Apple's support documents.)
I then bought a non-apple replacement battery from http://famous-battery.com and installed it in my laptop.
Now, when my laptop is on reserve battery power, it will give me the warning message, but it won't go to sleep when the battery runs down. Instead, it will force itself to shut down as if it immediately lost power. It seems like the equivalent of holding down the power button to force a shut down.
The machine will not automatically safe-sleep, let alone sleep normally.
Any ideas?
Thanks.

Your battery is defective. I had the same issue on a (authentic Apple) battery that was 5 months old.
It would get down to 0%, then instead of hibernating, it just shut off.

Similar Messages

MacBook Pro won't sleep when charging

My 15" i5 MacBook Pro won't sleep when charging; a reboot of the machine solves the problem temporarily, but it always recurs. When I close the lid and listen carefully, I can hear hard drive activity; the drive sounds like it keeps spinning up every 10 seconds or so.
This is not an issue when trying to sleep when running on the battery only. Any advice?

I don't have launch2net installed.
I'm not sure how this will help, but here's the last 5 lines from Console:
11-07-13 5:19:46 PM          Butler[156]          cache: adding applications...
11-07-13 5:19:46 PM          Butler[156]          cache: adding addresses...
11-07-13 5:19:47 PM          Butler[156]          cache: categorizing...
11-07-13 5:19:49 PM          Butler[156]          updated abbreviations cache (enabled)
11-07-13 5:19:58 PM          SIMBL Agent[133]          warning: failed to get scripting definition from /Applications/Utilities/Console.app; it may not be scriptable.

MacBook Pro won't sleep or shutdown (intermittent problem)

Every so often my MacBook Pro won't sleep or shut down. I can't find any rhyme or reason to it.
I notice the problem when I close lid, and it doesn't go to sleep. I then hit apple menu:sleep, and it does nothing. I hit shutdown, and OS shuts down, but gets stuck at blue screen with spinning circle indefinitely. Have to hold power button for 5 seconds to finally shut down. Startup is then slow, but doesn't give me an error message indicating improper shutdown or failure.
Most of the time it sleeps fine and shuts down fine.
Other posts seemed to have the problem more reliably, and the fix had to do with startup items. Mine is intermittent, and the only items in my startup folder are Norton Antivirus and Parallels.

I am also experiencing the exact same problem you are describing. Completely random when the machine will not sleep or shutdown, although it seems to occur more often when I've had the machine running for a few days, moving between home and office locations.
I have VMWare Fusion and Office 2004 installed. No iStatPro. I'm wondering could it be related to the kernel extensions that VMWare and Parallels install? Is anybody experiencing the non-shutting-down problem who doesn't have either VMWare or Parallels installed?
I found the following section in my system.log file that occurred the last time the machine wouldn't shut down. May be of some use to somebody
Aug 31 18:07:10 monza loginwindow[90]: sendQuitEventToApp (Microsoft AU Daemon): AESendMessage returned error -1712
Aug 31 18:07:21 monza shutdown: halt by james:
Aug 31 18:07:22 monza SystemStarter[14860]: authentication service (14870) did not complete successfully
Aug 31 18:07:28 monza SystemStarter[14860]: The following StartupItems failed to properly start:
Aug 31 18:07:28 monza SystemStarter[14860]: /System/Library/StartupItems/AuthServer
Aug 31 18:07:28 monza SystemStarter[14860]: - execution of Startup script failed

After 10.7.4 update macbook pro won't sleep

after 10.7.4 update, macbook pro won't sleep.

Test after each of the following steps that you haven’t already tried:
Step 1
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 2
 ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 3
 ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc drive kicks in) unless you hold the power-button down for a long period.

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc-drive kicks in) unless you hold the power-button down for a long period. Help?

Hi a,
Try an SMC Reset: http://support.apple.com/kb/HT3964

Macbook Pro won't sleep when lid open

My 2011 Macbook Pro won't go to sleep if I leave the lid open. I have checked System Preferences>Energy Saver and the display/computer sleep is set to 10 min for both Battery and Power Adapter settings. Even if I close all the applications down, my computer will still not go to sleep. The battery just gets completely drained if I forget to close the lid. Help?

1/31/13 9:44:10 PM PST
Assertion status system-wide:
   PreventUserIdleDisplaySleep             0
   CPUBoundAssertion                       0
   DisableInflow                           0
   ChargeInhibit                           0
   PreventSystemSleep                      0
   PreventUserIdleSystemSleep              0
   ExternalMedia                           0
   DisableLowPowerBatteryWarnings          0
   EnableIdleSleep                         1
   NoRealPowerSources_debug                0
   UserIsActive                            0
   ApplePushServiceTask                    0
Kernel Assertions: None

MacBook Pro won't sleep in OS X after reboot from Windows (again!)

This problem originally occurred about a year ago and no solution was found then but after a time, it simply went away. Well, now it's back: after a reboot into OS X (10.6.7) from Windows (7 Ultimate 64 Bit), my MacBook Pro refuses to sleep until rebooted a second time, after which it behaves correctly again. The Console log reports the following message: "System Sleep prevented by active remote login session (600 second threshold)". I've disabled Growl and DropBox (possible suspects last time) to no effect, reset the SMC and PRAM, all the usual things. I've tried when connected to mains power or battery, on wired, wireless or no network at all and still the same problem. Sleep behaviour under Windows is correct. Hopefully the problem will eventually cure itself as it did last time but I would like to discover the reason and find out what this "remote login session" could possibly be. To reiterate, this ONLY occurs immediately after rebooting from Windows.

Tried repairing BootCamp in 7, no change, don't think there was anything wrong with it in the first place.
Here is a section of the log after reboot from BootCamp and it says "System Sleep prevented by active remote login session (600 second threshold)". This ONLY happens after a reboot from Bootcamp, after another reboot all goes back to normal. What could the "active remote login session" be?
From log:
21/04/2010 23:08:56 kernel PM notification cancel (pid 16, configd)
21/04/2010 23:08:56 kernel IOPMrootDomain: idle cancel
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).
21/04/2010 23:12:00 configd[16] PowerManagement configd: tty sleep preventer: /dev/console
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).

MacBook Pro won't sleep, even in safe boot

Hey gang,
I can't figure out what to do with this problem. I recently did an archive & install of 10.5 on my 2.33 GHz MacBook Pro Core 2 Duo, and then used software update to get to 10.5.2.
Ever since doing that, my MacBook Pro will not sleep on its own anymore. It will sleep the display, but it won't sleep the system. (I can close the lid and it will sleep. I can also choose "Sleep" from the Apple Menu, and it will sleep. It just won't sleep on its own.)
At first I thought it might be Time Machine that was preventing it from sleeping, but I turned off Time Machine and the problem persisted. I tried creating a new user, and the problem persisted. In fact, I EVEN BOOTED IN SAFE MODE AND THE PROBLEM PERSISTED!
I went through every single step outlined on this page (yes, every single step), and the problem still persisted: http://www.macfixit.com/article.php?story=20070129234938244
Does anybody have any ideas what I can do at this point? I'm pulling out my hair over here....
Thanks!
Scott

I see you've done your homework. I have this no auto-sleep problem on my Mac pro and none of those things worked for me either but I thought you should give them a shot.
I made a little sleep program of my own. You are welcome to try it. It's a very simple shell script that checks system idle time and if it's bigger than the sleep timer you set in system preferences it puts your computer to sleep. It will work so long as you can manually put your computer to sleep from the apple menu.
You'll also need to create a launch daemon to periodically run the script.
here are the steps to do it.
1. copy and paste the following into TextEdit.
#!/bin/bash
idl=$"`ioreg -c IOHIDSystem | awk '/HIDIdleTime/ {print int($NF/1000000000); exit}'`"
sleeptimer=$"`defaults read /Library/Preferences/SystemConfiguration/com.apple.PowerManagement "Custom Profile" | grep "System Sleep Timer" | awk '{print $5}' | sed -e 's/;//g'`"
st=`expr $sleeptimer \* 60 `
if \[ $idl -gt $st \]; then
shutdown -s now
fi
2. Format it as *plain text* (shiftcommandT in TextEdit) and save it as sleep.sh (don't use the .txt extension) at the top level of your hard drive.
3. make it unix executable by entering the following command in terminal.
*chmod 755 /sleep.sh*
4. Download and install [Lingon|http://lingon.sourceforge.net>.
5. Open Lingon and create a new *Users Daemon*
Call it,say, com.sleep.launchd (the name is not important)
On line 2. enter /sleep.sh
and in section 3 set it to run every 30 seconds.
Click save (you'll have to enter your admin password).
6. Restart.
That's it. Once this is done you can forget about it. The sleep settings are still controlled from system preferences. The sleep agent will work with every user and even over the login window.
To uninstall it, open Lingon, select the launch daemon you made and uncheck the box "Enabled" in the upper right corner. save and restart.

MacBook Pro won't Sleep or Shut Down

My MacBook Pro won't go to sleep or shut down.
Sleep
The behaviour is the same whether I press the power button and choose 'Sleep' or whether I choose 'Sleep' from the Apple menu. The computer stays awake, but it loses the ability to respond to Keyboard Shortcuts, such as those used for Expose, and can get stuck in some Apps. If I close the lid the computer stays awake but the screen blacks out. Re-openning the lid does not re-illuminate the screen so I have to force shut down and re-boot.
*Shut Down*
The behaviour is erratic. Sometimes the computer simply ignores me (although it does close the 'Are you sure you want to Shut Down now?' window), and sometimes it goes to the blue screen with the progress circle and hangs.
*What I've tried already*
- Resetting the SMC
- Checked the Firmware versions are the latest

Sorry for the repost. New to this forum and I hadn't seen the answers to the last time I brought up this topic here:
http://discussions.apple.com/message.jspa?messageID=5050821

MacBook Pro won't sleep when lid is closed and battery lights won't work?

I have a 2010 MacBook Pro 15" and ever since I got it, the battery indicator lights wouldn't light up (not that big of a deal) and the computer wouldn't sleep when I closed the lid.
I've reset the NVRAM/PRAM, the SMC and verified/repaired my hard disk as needed. But the computer still won't sleep when I close the lid (regardless if the machine is plugged into a charger or not). Is there a known fix for this problem? I've been searching through the forums and troubleshooting from advice that other people have suggested, but nothing seems to be working. Any help is greatly appreciated!

This exact thing happened to me. Resetting the SMC solved all my problems. Here's a link to how to do it: Intel-based Macs: Resetting the System Management Controller (SMC) Hope it works!

Macbook Pro won't sleep properly.

Hello;
I have a problem with my mid 2009 13'' MacBook Pro that won't sleep properly.
Whenever I close the lid, or chose ->Sleep, it takes a few seconds and the system sleeps (fan off, led fading off) , but INMEDIATELY after just a few miliseconds, the system wakes up again (fan on, led on, hdd spinning).
This sequence happens again and again indefinitely (sleeps / wake / sleeps / wake, and so on...)
Then I open the lid and everything works as expected.
So far I tried all this, with no luck:
- I've installed a clean Mountain Lion from scratch.
- The system is untoched: no new apps installed, no new drivers installed.
- All sharings are disabled.
- Bluetooth is disabled.
- Infrared port is disabled.
- There's nothing attached to the computer except from the magsafe cable.
- There are no background processes preventing the system from sleep (checked using "pmset -g assertions")
- There is no disc loaded in the optical unit.
- "Wake for network access" is disabled in Preferences->Energy Saver.
- SMC y PRAM reseted several times.
As you can see, I don't know what else to try...
I would REALLY appreciate any help or suggerence.
Thanks in advance,
Nicolas.

A SMC will not have any results with this, in my past experince. Surprisingly the loginin items is the usual culprit. Try option, command, delete (don't hold these keys ,just press them)and wait till it goes to sleep, and stays that way. Then if it stays aslep try closing the lid. Disconnect all peropherals. Try system preferences>energy saver, make sure comouter sleep is ot set to never, as well as the display on both power adapter and battery. On the same pane, click schedule and make sure the start up or wake is not clicked. Also try a Ssfe boot: Power off, power back on holding the shift key, coninue to hold the shift key till you see the progress bar.This will disable all 3rd party software (it some times fixes some stufff) try the sleep menu under the Apple, or the option,command,delete. Hope this offers some help. If yourMBP is new, less thsn 1 year old, or you have Applecare, I would let them deal with it. You have a warranty,USE IT! All the best
Close all applications/operations.
You ca try a pram reset for the heck of it, in case there is somrthing strange in there that needs to be flushed.
Pram reset: Power off, power on, hold the following keys before the start chime. option,comman,P,R (no commas) and continue to hold the keys till you hear thestart chime 2 times then relesase.Reboot.
Good luck

My Macbook pro won't sleep while its plugged in

Hello everyone,
   I bought my macbook pro few months ago. Now i'm facing sleep problem while my laptop is plugged in. I searched on internet try all stuff. but still it won't work. I does my update regularly. This is really **** small problem but its some time its make my laptop so worm. i realize few days ago. I really wanna solve this. otherwise i have format it and have to put LION again but i dn't wanna loss my all date and other setting because of this sleeping problem..
Mac detalis:
Processor 2.2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software Mac OS X Server Lion 10.7.4 (11E53)
System report
Battery Information:
Model Information:
Serial Number:          D86130402XDDGDLA1
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          406
Hardware Revision:          2
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          6610
Fully Charged:          Yes
Charging:          No
Full Charge Capacity (mAh):          6694
Health Information:
Cycle Count:          86
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -15
Voltage (mV):          12467
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          85
Revision:          0x0000
Family:          0x0085
Serial Number:          0x001f2cdd
Charging:          No

Try resetting the SMC
http://support.apple.com/kb/HT3964
And reset the PRAM
http://support.apple.com/kb/PH4405

Macbook Pro won't sleep when lid shuts or hit sleep

Hey Everyone,
So after the latest update my Macbook pro no longer immediately sleeps after shutting the lid. It also won't sleep when 'sleep' is hit in the apple menu. It's actually really annoying as I need it for security.
Does anyone know how to fix this problem?

Try Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Macbook Pro won't sleep after updating to 10.4.11

Hi,
I just updated to 10.4.11 reluctantly from 10.4.9 as whenever I do update I always have issues...I basically just went to software update last week and updated to everything I could. I've just been reading the forums and noted that updating is not always that easy...
Well basically my computer won't sleep if the lid is left open, this is IMMENSELY annoying since I often leave my desk to work on drawings, and I don't want energy being wasted like it is at the minute. Call me picky but I just want my computer to work.
I've reseted the PRAM, (option, alt, p and r), closed all applications, etc, but no luck...
Its a 2.2ghz MacBook pro, 2GB. Thank you in advance
Neal

The important thing for the future imho, is to always Repair Permissions before & after any update... seems to ward off most of these problems. Of course that is only good if the disk is Verified once in awhile.
Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
http://docs.info.apple.com/article.html?artnum=302672
About Disk Utility's Repair Disk Permissions feature...
http://docs.info.apple.com/article.html?artnum=25751
In fact I'd start with those 2 now, if that doesn't help you may need to reapply some updates by getting them directly from apple>downloads.

Macbook Pro won't sleep

I have this setup: a MacBook Pro running Mountain Lion, an external 27" cinema display, a bluetooth apple keyboard and a bluetooth magic mouse.
The MacBook Pro runs with the lid closed.
It looks like the computer won't sleep anymore. It stays on for days when not using it. In my settings I have set I want the computer to sleep after 15 minutes of inactivity.
I prefer to switch off the keyboard and mouse when I'm away from my computer, so I can't use the Apple menu or shortcuts to make the computer sleep.
Any idea?

i am pretty sure this is because you have it connected to an external display. i am not sure if there is a workaround for this.

MacBook Pro Won't Sleep on Reserve Battery Power

Similar Messages

Maybe you are looking for