MacBook Pro won't start after installing new hard drive and me

I changed the hard drive and also upgraded the memory on a mid 2010 13 inch Mac and then used the disks that came with it to reinstall the OS that came on that disk. It worked fine and installed and then the screen came on to transfer from the time machine to the new hard drive so I said yes, and it seems to work fine but then when it finished it asked me for a password. I hadn't put a password on it so that was a surprise. I tried several things but it finally only had the option to restart and when I did that it seemed like it was starting with the apple symbol and the little gear but then it went to a Gray screen with the little gear, and then seems to freeze and then finally goes to the blue screen. The disk to reinstall is still in the drive but I can't seem to get the install to start again. I've tried holding down the c key and starting, I've tried holding down the command plus the c key and nothing....just goes to the blue screen. Any ideas on how to fix this?
Thanks

Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Windows 7 won't load after installing new Hard Drive and Recovery software

HP G72 Notebook PC
xz218UAR
I guess a virus crashed my hard drive so I bought a new one. I installed the new drive and loaded the recovery disks that I also bought from HP. Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS. I've tried starting over from Disk 1 but it's not doing anything different to fix it.
I removed the new hard drive and reinstalled it but it's still doing the same thing.
What am I doing wrong and HOW DO I FIX IT?

Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Mac Book Pro 15" mid 2009 after installing new hard drive and 8 gb memory, start up disk is still full, start up from power off is very slow, and programs open immediately after start up EX. word, excel. Help?

I installed a new 1tb WD hardrive in my mid 2009 macbook pro along with upgrading from 4gb to 8 gb.
My start up disk is still almost full, booting up is extremely slow, and programs open up by themselves once booted up ex:word, excel.
New TB drive shows up alng with 8 GB but, new hard drive not updating somehere? What am I missing? See screenshots below

Thanks for the response, but I'm looking for answers to a few of the other answers before I look at completeing the steps above.
1. Whyis the new TB drive recognized in image 1 but still have the original 256GB size still recognized(and almost full) in image 1 also? The HD should now be 1 TB, not 256 correct? If this were the case, the HD, would only be fraction of full capacity, Where is the disconnect between reconizing the installed tb HD but, it not being used?
2.Image Number 2 shows once again that the new tb internal HD is recognized. However, in image 3, the HD 256GB drive is still shown underneath the new HD. Does this show that I am misssing something, some step, related to confirming the new HD should be fully reconized instaed of this old 256 that still remains?
3. In image 4, the SATA heading, shows the TB hardrive, However, in image 5, the 256GB drive is still being shown under the storage heading? Once again, seems like I've missed some simple step to make this all the same?
4.Why is the start up from boot up soooo slow now. I was never even close to this slow(slower than PC startup slow) before the new HD was installed. IS this common when updraging to a new HD? Doesn't seem right?
5. Why now all of a sudden when the computer finally boots up are certain programs automatically opening up, word, excel, when they have never opened up like this before?
Summary: 1. New memory issues, 2. Very slow start up, 3. Programs opening up automatically at startup.
Until I address these issues, I'm not going to worry about loking through and deleting heavy folders.
All responses welcomed!

Playlists Missing After Install New Hard Drive and Upgrade to Win 7

My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.

YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH!

'09 MacBook Pro won't start up after installing new hard drive and restoring from an external hard drive.

I am in the process of replacing my hard drive and have run into a problem. I reinstalled OSX 10.6.3 using a DVD I bought off Amazon. That went well and I then restored my hard drive using an external and Time Machine.
After that, things still looked good but I couldn't log in to my user (and access my MacBook) because my password wasn't working even though my hint was correct. Yes, I am POSITIVE my password was correct; I even tried a couple other passwords to humor myself. I then gave up and decided to restart the computer.
Now my MacBook won't start up at all. It goes o a gray screen with a still loading symbol for a couple minutes and then goes to a solid light blue screen. I've tried starting up while holding command+R and I tied holding just command and neither worked.
Did I install the wrong OSX because I didn't use the same DVD that came with the laptop? Is there something wrong with my hard drive already?
Please help =[

You probably bought the wrong RAM that has different pin assignments, so it won't fit in the slot. Return it.
I bought 4GB Memory online for my MacBook, so I could get it to run twice as fast.
Doubling the memory does not make your computer run twice as fast.

Windows 7 Enterprise is not genuine after installing new hard-drive and cloning the old one

I retired from my job as a university professor two years ago, and they let me keep my laptop computer, which is a Dell Latitude E4300 with Windows 7 Enterprise installed. I do not have any of the original disks for Windows. Recently, the hard-drive began
to fail, so I replaced it with a new one, cloning the old hard-drive onto the new one. Soon after that, a popup window began appearing saying that this computer is not running genuine windows. One important consequence of this is that I can no longer use Windows
Update, so I have concerns about security. If I go to the control panel under “System”, it says windows is activated and gives me the Product ID. I have talked to tech support at Microsoft, and they tell me something along the lines of the following: that
the problem is the new hard-drive is not recognized as being licensed to use this copy of Windows, and that I should post a question on one of the forums asking this: How can I reinstall Windows 7 Enterprise on the new hard-drive? Any assistance will be much
appreciated.
PS I have no idea which forum this should go under, so pretty much just picked one randomly.

Thank you for the reply. Below is the diagnostic report:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-XVH7B
Windows Product Key Hash: juq6zzHf9lIH1XRY1VK2YrQYWO0=
Windows Product ID: 55041-011-1350732-86681
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {04DEBE17-699E-4D0A-A59D-3C196C2C84FE}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{04DEBE17-699E-4D0A-A59D-3C196C2C84FE}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-011-1350732-86681</PID><PIDType>6</PIDType><SID>S-1-5-21-240060965-2561850352-3419627931</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Latitude E4300                  </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A21</Version><SMBIOSVersion
major="2" minor="4"/><Date>20110111000000.000000+000</Date></BIOS><HWID>68B63A07018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL
</OEMID><OEMTableID>M09    </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>1DB36DFCEA6586</Val><Hash>uf4pjarnSPRhy0+iMrKzL8KTLeY=</Hash><Pid>89388-707-1262377-65112</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12" Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App
Id="44" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-011-135073-03-1033-7600.0000-0402011
Installation ID: 017002020180881956515246274583104396790522223804443953
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: XVH7B
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 6/6/2014 2:38:03 PM
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: 5:30:2014 15:10
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys
HWID Data-->
HWID Hash Current: MgAAAAEAAQABAAIAAQABAAAAAwABAAEAeqgiDXhybAimeiQ1hEDag8ysrmAi+8rbRso=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name   OEMID Value   OEMTableID Value
APIC           DELL         M09
FACP           DELL         M09
HPET           DELL         M09
BOOT           DELL         M09
MCFG           DELL         M09
____           DELL         M09
ASF!           DELL         M09
TCPA
SLIC           DELL         M09
SSDT           PmRef       CpuPm
scott cohen

Power Mac G4 Won't Boot after Installing 2nd Hard Drive and Additional RAM

Hello. I am using a Power Mac G4 (PCI graphics) that I bought a few weeks ago. It was working perfectly fine until I tried to add an additional hard drive and add more RAM to the machine. After I closed the case and plugged it back in, it won't start up at all. No sound, no lights, nothing spinning, nothing. I removed the added hard drive and RAM, but it still refuses to start. I don't know what happened. Hopefully it's not a logic board failure or anything else equally bad.

Welcome to Apple Discussions!
The PowerMac G4 PCI forum is over here:
http://discussions.apple.com/forum.jspa?forumID=586
I'll ask a moderator to move your thread. Try replacing the clock battery, and hitting the CUDAS switch.

Hp mini 110 boot disk error after installing new hard drive and system recovery

Need help, HP mini 110 Windows 7 32 bit. using my recovery disks I created i was able to recover to the old 160 gb hard drive. After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.

If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
Can't get enough of this Envy...

Has anyone had trouble with their computer recognizing your I phone after installing new hard drive and reloading I tunes?

Has anyone had a problem with their computer recognizing their I phone ? I had to replace my hard drive And reloaded iTunes but know it doesn't recognize my phone but it will download pictures from it?

I had my HD replaced under the recall program. I am running 10.6.8 and Safari 5.1.7 on a 2.8GHz iMac.
I haven't noticed any significantly different behavior of Safari since having my HD replaced and using Time Machine to restore my data. The only thing I've run across in about 2 weeks is that Safari's Preferences panel takes a bit longer to load than I remember.
One thing you can try is launching Safari from your computer's main Applications folder. If it still crashes, you can also try downloadng a fresh copy here: http://www.apple.com/support/safari/
Have you ever checked out Firefox? I personally like it better than Safari because it offers more security options, such as greater control over cookies, and supports many useful privacy and security plugins.

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Can I get my bookmarks back after installing new hard drive?

Can I get my bookmarks back after installing new hard drive?

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

MacBook Pro won't start after I completed my first backup using TimeMachine

Hello,
My MacBook Pro won't restart after I did my first TimeMachine backup. I tried in SafeMode but no luck. My MacBook Pro is a 2009 early version running Snow Leopard. Please help.
Thanks,
Serey

I have managed to get into my computer through the OS X install disk but now my wi fi hardware is gone. Ie no airport.
When I try to re install the airport extreme wi fi base station software it tells me it can't be installed as this version of Mac OS X (Lion) on is volume is not supported.
Not even an Ethernet cable gets me on line. In system preferences when I do a network diagnostic all I get is the spinning disk. Again, any ideas how to get around this?
Thanks

MacBook Pro won't start after changing RAM cards; just beeps.

MacBook Pro will not start after changing RAM cards. It just beeps; then I force it to quit.

The three things that come to mind immediately are that the RAM card isn't seated properly (you should hear or feel a click when it is seated), the RAM is bad or marginal for that Mac model, or you didn't get the correct RAM type.

MacBook Pro won't start after changing access rights

I did something very wrong. Unfortunately I changed the access rights of Macintosh HD for "everyone" to none.
Result, my MacBook Pro won't start anymore.
Already tried the installation disk, reset password for root and users. No result.
Help program "check acces rigths". Didn't work either.
How do I reset the access rights of Macintosh HD?

https://discussions.apple.com/docs/DOC-2240
The first solution is what you're looking for.

MacBook Pro won't start after installing new hard drive and me

Similar Messages

Maybe you are looking for