MacBook Pro won't start up, can I transfer photos to iMac any way
My MacBook Pro will not start up after latest update, I contacted Apple Support who said I needed a thunderbolt cable, I purchased this and tried to put my photos onto someone else's IMac, iit won't work any suggestions please.
You may take out the HDD and install it into an enclosure. Then connect it to a Mac via USB and If the HDD is functional, you should be able to take the data off of it.
Ciao.
Similar Messages
-
The photos on my iMac have been modified to be read by iLife 11 (which is installed on my MacBook Pro). Now I am unable to view my photos on the iMac as I have an older version of iPhoto installed. Can this modification be reversed perhaps using time-machine?
No, Library conversion to iPhoto 11 is one way only. You will need to upgrade you iMac to iPhoto 11.
-
I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Hi! My MacBook Pro won't start! HELP !!!
Hi! My MacBook Pro won't start! I have tried everything I can think of like Safe Mode (doesn't work), Recovery (does not find Recovery Drive), Booting with OS Snow Leopard Cd (doesn't work)...
I have really no clue about what to do now... I paid quite a lot of money for this computer and am pretty short of money nowadays! Would like to repair with help rather than having to take it to Apple Store.
Has anyone had this same problem?
All I get is white screen + grey Apple and spinning grey disk... it's 100% frustrating! Any help would be more than welcome since I think i've tried EVERY SUGGESTION on this Support Center and Youtube videos...
This MBP is from 2011, runs on OS X 10.6.8
I tried booting with OS X Snow Leopard CD, it didn't work! (my cd player works! recognizes the Snow Leopard CD, but then never opens it... goes back forever to the with screen + apple and spinning disk)
I don't care about the content, it's OK if i lose all DATA... I just want to bring this Mac BACK TO LIFE!
When i run coomand on root# fsck -fy --> RESULT = my HD was checked and seems to be FINE!
ThanksPlease make a Genius Appointment and take it in for service.
-
My 2009 2.26Ghz MacBook Pro won't start up
My 2009 2.26Ghz MacBook Pro won't start up. I know it's not the HDD because I replaced it with the old one I had in it and it did the same thing. I also know it isn't the HDD because I can boot of of it when I attatch it via an external HDD enclosure. It sometimes turns on if I let it sit for 30 minutes and if it does turn on it works perfectly and has no symptoms until I close it then it freezes up when I wake it up and I have to hard restart it but it doesn't restart then. It seems to do this more so if I close it then move it (put it in my bag and go to school). It's getting me really upset cause if it's my motherboard it's $600 to replace (almost not worth replacing except I don't have $1400 for a new MBP) please give any advice. I thought about buying the data doubler by OWC but that would be a last resort. I upgraded the ram to 8gb, 1333mhz (I know it uses 1066Mhz but I couldn't find any where I live so I put in 1333mhz ram expecting it to underclock to 1066 which it seems to have done that with no issue to my knowledge just thought I'd add that in case though.
Sluggish could be due to not enough ram for what you want to do.
Keep working with it, you may need to put more ram in, but go for the stuff that meets the specs.
A much liked source on here is OWC, http:www.macsales.com you only have to look up your machine to get exactly the right stuff.
Get back with how it is working, would like to hear more. -
Hi. My Macbook Pro won't start, in the middle of the screen, there is a folder sign with a question mark blinking. Thanks a lot!
Here's a link to a Support page on the topic, which may be of help in finding resolution:
•A flashing question mark or globe appears when you start your Mac
There are a few known causes of this symptom, so you'd have to try some things to
see if you can narrow down the cause; this often accomplished by finding success.
Hopefully the info there helps.
Good luck & happy computing! -
Attn: macbook pro won't start up past grey screen NO MATTER WHAT
my macbook pro won't start up past the grey screen, NO MATTER WHAT I DO. i've searched all the discussions on this, and NOTHING WORKS. nothing caused this either - i was just browing the internet and using ichat, and my computer shut down, and that is when this started.
I am EXTREMELY disappointed with this bullstein. My computer works great, etc., and I support mac and apple to the nth degree, but then some stupid crap like this happens and I can't use my computer at all. I have to use my sister's **** ibook g3 to even do this.
PLEASE HELP. do NOT post what you have already posted in the other discussions, and i've already been welcomed to the boards. I can't go to an apple store because i'm on vacation in new mexico for the summer, and there no stores anywhere near here. is there any real advice around here? I need to use my computer. That is why I spent close to $4,000 for it with upgrades and software.where can i get an install disc for the macbook pro?
You really need to use the one that came with your MBP. If you don't have it, a retail Tiger OS X disc should work.
also, could an archive/install potentially free up some harddrive space on my computer?
No, it will actually use more space, so you will need at least 6G of free space. To clean your hard drive, use WhatSize.
WhatSize >>
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
An Apple User Group -
Macbook Pro won't start at all, no chime, no gray screen, nothing
My 2+ year old MacBook Pro won't start. Nothing happens when the start button is pushed, no chime, nothing. I've tried Control-Command-Start; nothing. I've tried with and without power connected; nothing. I've unplugged the power adapter from the wall, still nothing. Any ideas?
You can try a SMC reset, but it that doesn't power something it needs repair or replacement.
https://support.apple.com/kb/HT3964
Sometimes if the battery was really drained or old, it takes a long time to get it started charging again, like a couple of weeks.
https://support.apple.com/kb/TS1713
https://discussions.apple.com/message/16276201#16276201 -
My macbook pro won't start up. Instead of the apple logo appearing in the start up only a grey folder with a ? At the center appears
Boubert,
the question mark in the folder typically represents the inability to recognize a valid filesystem on the volume being booted from. You can try this, although it might not make a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to boot normally now? -
My MacBook pro won't start. It is frozen on the gray screen with the apple. Please help?
My MacBook pro won't start. It's stuck on the gray screen with the apple logo.
Reinstall OS X:
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
My macbook pro won't start up. I get the white screen and the grey apple icon the spinning wheel......and it doesn't change !
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Installed Yosemite...now my MacBook pro won't start up. Keep showing "Kernel Panic!" HELP!
installed Yosemite and now my MacBook pro won't start up. Keeps showing "kernel panic"
PLEASE HELP ME!If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report. -
My MacBook Pro won't start it just goes beep beep beep when I press the power button
My MacBook Pro won't start it just goes beep beep beep when I press the power button
Hi Csound1,
I haven't added any RAM my daughter was using the computer then it hung so powered it down then the beeping started. Do you know if there is a combination of buttons I can press when powering up that will put me in some kind of safe mode so that I can find out what's up, I tried pressing D when the beeping started but it didn't make a difference.
MC -
I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.
I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!
Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!
-
Spilled liquid on MacBook Pro - won't start - any suggestions?
spilled liquid on MacBook Pro - won't start - any suggestions?
Thank you both for your responses! I watched a video on how to remove the hard drive - special tork(?) screwdriver and too many steps for me to feel confident about doing it myself, so I took the computer to an Apple Store - and thank God, the hard drive appeared undamaged - they are transferring the data to a new Macbook Pro. The loss of data was the scariest part, so I am breathing again!
The laptop was three years old, I was hoping for another year or so before upgrading, but such is life. I appreciate your upfront advice.
Maybe you are looking for
-
How can I add a Last Update to a web page with a web app.
I would like to know how to update a webpage whenever a web app item has been added or updated last. I have the tag {tag_lastupdatedate} but it only works is only for the web app list or details page. I want to be able to add the date and time as to
-
Installing driver without having connected printer
Hi. I have to install the hp laserjet p1102 driver to my Server 2012R2 without physically connected printer for remote desktop sessions. I had downloaded LJP1100_P1560_P1600_Full_Solution, but I can't install it without printer. In the unpacked folde
-
Could not resolve ms:script to a component implementation?
hi, i am new at flex and tried to see a working porject. tried the code given in the url below: http://learn.adobe.com/wiki/display/Flex/1b.+Code+Files But i am getting the error: "Could not resolve <mx:Script> to a component implementation." I asked
-
My dausgther has forgotten the password to her ipod touch. The ipod has never been sunced to itunes. Is it possible to recover the contents of the ipod?
-
How to alphabetize mailboxes automatically in OS X?
When I create mailboxes in OS 10.9.1, it does not automatically alphabetize them. Is it a bug in Mail? How do I set Mail so it automatically alphabetize the mailboxes? Please advise. Thank you.