Macbook Pro won't start up, only to blue screen... no options work!

Yesterday I installed Skpe and later in the day noticed my calendar lost all it's info (no one has access to my laptop). I did a restart and still no info on my calendar.
I probably did something I should not, because of security issues I went in an locked several folders. A few in my library as well. I am afraid maybe this caused some of my issues. After I restarted I get the sound, the apple, but after that the blue screen and spinning wheel. It spins for 5 seconds then is blank and blue for another 5 and just keeps doing that as long as I let it.
I have tried safe boot, but after the long restart it does the same thing. I have also tried with the Leapord disc one, it will not boot from that, even with the "c" button held down after restart. I did a hardware check both with that disc (holding the "d" button down on restart), it checks the disc but finds nothing and of course I can not see the hard disc to turn anything off. I also tried starting with the "option" key, that was unsuccessful also. It showed the "Macintosh HD" icon, the proceeded to do it's progression of what I initally mentioned. Help, did I do myself in locking folders... or could this be from installing skype? It was the only install other that updating the software yesterday.

Hi claudia:
fsck is a disk repair utility like Disk Utility. The name is short for FileSystemChecK. Since the
Disk Utility framework is not loaded in single user mode, fsck must be used to repair the disk
instead as it does not depend any core services or frameworks to be loaded into memory in order
to run. Unlike Disk Utility, it does not automatically repeat repairs until all possible repairs are done,
thus requiring a little more user interaction than Disk Utility, but other than that, it basically carries
out the same disk repair functions as DU, you may have manually repeat running it though until
it repairs all errors it can repair.
The reboot command is simply a way to gracefully exit single user mode whenever your done doing
everything else. Like the door, you do not use it until its time to go.
Kj

Similar Messages

My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

Mac OS X: Gray screen appears during startup

TS2570 My MacBook Pro won't start up.only gray screen

Hi there,
My MacBook Pro won't start it show only gray screen (with apple logo )
And I have tried these solutions none of them worked
1/ Reset PRAM and NVRAM
2/ Restart in safe mode
3/Run Disk Utility in Single User Mode
After I tried third option it shutdown by itself
Please I need data inside the laptop , i have no backup
what should I do ?
I need some kind of solution does not contain formatting or deleting my data
Thank you in advance

..Step by Step to fix your Mac
Create a data recovery/undelete external boot drive
My computer is not working, is my personal data lost?

Macbook Pro won't boot. Stuck on blue screen?

Boy does my Mac have problems, ok here we go!
Originally, the display on my mac was distorted during operation and when trying to boot up, including in safe mode. Now the distortion is gone (except in safe mode), but when booting up, my Mac either gets stuck on the blue screen or, if it successfully boots up, can't handle anything more than safari without freezing up completely. I have a partition on my hard drive with Windows installed and tried booting up from that, but no luck. I've also gone in as a single user and changed the drive permissions (that worked once, but hasn't since then). I've done a hardware test and that didn't turn anything up. I can't think of anything else to try. Any ideas? I'm stumped.
Boring details:
Macbook Pro approx. 3 years old.
4GB 1600MHz memory
Approx 100GB free on hard drive
OS X 10.6.8

I did that when using singe-user startup. That worked at first but not anymore. I would reinstall the OS, but I'm out of the country and without a disc.

Attn: macbook pro won't start up past grey screen NO MATTER WHAT

my macbook pro won't start up past the grey screen, NO MATTER WHAT I DO. i've searched all the discussions on this, and NOTHING WORKS. nothing caused this either - i was just browing the internet and using ichat, and my computer shut down, and that is when this started.
I am EXTREMELY disappointed with this bullstein. My computer works great, etc., and I support mac and apple to the nth degree, but then some stupid crap like this happens and I can't use my computer at all. I have to use my sister's **** ibook g3 to even do this.
PLEASE HELP. do NOT post what you have already posted in the other discussions, and i've already been welcomed to the boards. I can't go to an apple store because i'm on vacation in new mexico for the summer, and there no stores anywhere near here. is there any real advice around here? I need to use my computer. That is why I spent close to $4,000 for it with upgrades and software.

where can i get an install disc for the macbook pro?
You really need to use the one that came with your MBP. If you don't have it, a retail Tiger OS X disc should work.
also, could an archive/install potentially free up some harddrive space on my computer?
No, it will actually use more space, so you will need at least 6G of free space. To clean your hard drive, use WhatSize.
WhatSize >>
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

Start up Disk full and MacBook Pro won't reboot. Only white screen but can sleep, restart, shut down.

Start up Disk full and MacBook Pro won't reboot. Only white screen but can sleep, restart, shut down.

Reboot into Safe Mode (hold the shift key down at the sound of the chime, release when the progress bar appears) Safe Mode will take longer to boot than normal.

17" Macbook Pro won't start at all. I shut it down last night at 80% and now there is only black screen, no light, no sound. What to do?

My 17" Macbook Pro won't start at all. I shut it down last night at 80% and today I get only a black screen with no sound, no light, nothing. The power cord light does show orange when plugged in. I don't know exactly which OS it is. It's model # A1286. I've tried all the tips about holding down different keys to no avail. Anyother ideas? (The serial # is w8******agu if that helps.) Many thanks.
<Edited By Host>

I had the exact same issue... Macbook Pro late 2008 with Core2Duo. Went to all the steps suggested in the knowledge base, tried to reset the SMC, but to no avail. Took it to the Macstore in Mexico, the wanted to replace logic board for $800.... Finally, I sent it to a logic board repair service, where they "fixed" the logic board for $200. It worked perfectly for 4 months, then happened again
Any ideas?? I would appreciate any help!!!!!

My macbook pro won't start up. Instead of the apple logo appearing in the start up only a grey folder with a ? At the center appears

My macbook pro won't start up. Instead of the apple logo appearing in the start up only a grey folder with a ? At the center appears

Boubert,
the question mark in the folder typically represents the inability to recognize a valid filesystem on the volume being booted from. You can try this, although it might not make a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to boot normally now?

My MacBook Pro won't start up it it will only give me a padlock

My MacBook Pro won't start up it will only gives me a big padlock

I sent it out for repair to PowerBook Medic because apple said they could fix it but for 1200 which I got it fixed for 800! So I thought but when it was returned it is doing the same thing that it was doing before when I just press the power button it is searching. And when I boot up in options it gives me the Big Padlock!
If apple knows how to bypass this how come it is not shared with the public when this is A TOP Issue that I see all the time. I never set a firmware password I thing the app.e Genius Bar set one when I had brought it in way before this problem.
If anyone knows how to bye pass this pad lock password I am all ears.
Thanks Suzanne

MacBook Pro won't start at all - clicking noise with black screen

Early 2011 MacBook Pro won't start: makes clicking noise after power button is held down, but no screen movement and after click, sounds like computer just stops working. Already did a SMC reset, and undid battery to try to run on charger power only. Same result every time. Also, my Apple Care expired 3 days ago. A few weeks ago had to repair a disk using Disk Utility because there was a discrepancy between how much storage was in the drive versus how much was actually being used.

You likely have the problem that many of us 15" and 17" 2011 models are having: a faulty soldering GPU and as discussed here -> https://discussions.apple.com/thread/4766577?tstart=0. It usually, but not always, beings with screen glitches and then gets to the point where the machine will simply not boot.
It's ashamed that you're not longer under AppleCare which would have, at least, got you a new logic board. A new logic board, however, doesn't usually fix the situation - only a BGA Reballing of the GPU seems to have long-lasting fixes.
Read through a few the articles (not all of them!) and make the decision yourself - and then make the decision about whom your going to contact.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

My 2009 2.26Ghz MacBook Pro won't start up

My 2009 2.26Ghz MacBook Pro won't start up. I know it's not the HDD because I replaced it with the old one I had in it and it did the same thing. I also know it isn't the HDD because I can boot of of it when I attatch it via an external HDD enclosure. It sometimes turns on if I let it sit for 30 minutes and if it does turn on it works perfectly and has no symptoms until I close it then it freezes up when I wake it up and I have to hard restart it but it doesn't restart then. It seems to do this more so if I close it then move it (put it in my bag and go to school). It's getting me really upset cause if it's my motherboard it's $600 to replace (almost not worth replacing except I don't have $1400 for a new MBP) please give any advice. I thought about buying the data doubler by OWC but that would be a last resort. I upgraded the ram to 8gb, 1333mhz (I know it uses 1066Mhz but I couldn't find any where I live so I put in 1333mhz ram expecting it to underclock to 1066 which it seems to have done that with no issue to my knowledge just thought I'd add that in case though.

Sluggish could be due to not enough ram for what you want to do.
Keep working with it, you may need to put more ram in, but go for the stuff that meets the specs.
A much liked source on here is OWC, http:www.macsales.com you only have to look up your machine to get exactly the right stuff.
Get back with how it is working, would like to hear more.

MacBook pro won't start up.

The last two times I've been in Mexico City, my MacBook pro won't start up. I hear the chime and see the apple icon, but it just spins and makes a clicking sound. It works fine back home. I think it might be the altitude, but my husband's MacBook works. Help!
I tried restarting in the safe mode, but it only show the apple icon and not the spinning progress monitor. I don't have the discs that came with the computer here with me. Is there a genius bar in Mexico City? Any ideas to fix this?

sorry disregard this post. it's in the wrong forum.

Macbook Pro won't start-up (black screen)

Hello,
I'm having some problems with starting my Macbook Pro
specs of my macbook pro are here: http://support.apple.com/kb/SP13 (15,4 inch 2,2 ghz)
My macbook pro won't start up anymore, i press the start-up button, it makes the 'krie'-sound then the vans start spinning slowly and then he get's quiet. (screen stays black and the light at the mousepad is on).
I tried:
-Connect it to power and wait 15 min. then try again -> same result
- hardware test (installation disc 1 and then press d) -> screen stays black but the disc starts spinning
- pram-reset, -> same result
the only thing i didn't do is check if my ram-sticks are still in position (i never bought new ram, but maybe it started to get loose)
what to do?
Message was edited by: Klapschaats

Just google Nvidia 8600m, and problem, or oh god my screen is dead, and see what comes up.
Once again, if you have a Macbook Pro from mid-late 2007, chances are you have a bad chip. They will replace your logic board, with another bad chip, which may or may not go bad. It's an obvious issue, Nvidia admits they have a problem, and Apple is just going to quietly resolve individual problems.
If your computer turns on but the screen doesn't, it's about 99% likely it's the GPU. Go ahead and let Apple replace it. Oh, and if you have a MBP from that time period and don't have apple care. GET IT NOW. You will most likely have a Black Screen Of Death at some point, and Apple care is cheaper than the repair (which may or may not work). Some people have gone though three logic boards. Good luck.
<Edited by Moderator>

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Installed Yosemite...now my MacBook pro won't start up. Keep showing "Kernel Panic!" HELP!

installed Yosemite and now my MacBook pro won't start up. Keeps showing "kernel panic"
PLEASE HELP ME!

If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.

Macbook Pro won't start up, only to blue screen... no options work!

Similar Messages

Maybe you are looking for