MacBook Pro won't startup

Hi, I know this topic has been discussed many times before, I've looked through the archives for some solutions, but in my case I just can't get anything to start-up and fear it's a logic board failure requiring re-install. If anyone could offer any advice I'd be grateful.
I've a MacBookPro running OSX.6
At first, the cursor froze on the desktop - no movement at all. I force restarted but the machine then froze in the early stages of loading after the Apple logo appears. This was accompanied by a faint repeated knocking sound. After a few attempts trying to open in safe mode etc I was able to get the Mac to start-up again and immediate began backing up time machine onto a hard drive. After a short while however the screen froze once more, and this time no attempts at restarting in whatever mode worked - grey screen slowly gets to the Apple logo, the loading bar appears, then after a few seconds, pouf! it just shuts down - power down, black screen.
I tried starting up from the installation CD so I could run Disc Utility, but same problem - CDrom is now stuck in the machine to add to my woes.
I checked the back up on the hard drive and discoved it was incomplete, so if I have to take it in to the Genius bar for a repair I'll have lost a lot of data.
Any suggestions?

Sorry,your HD is messed up, even may be going out... I hate 2.5" drives, they seem very short lived.
If it's under warranty I'd try Apple Repair, if not, there's a chancey way of trying it yourself... involves disconnecting the HD, booting off the CD, re-attaching the HD Cable, etc.
Oh, if you had a Diskwarrior CD, it might be able to save/repair your HD.

Similar Messages

Help~My 2012 macbook pro won't startup

Help~My 2012 macbook pro won't startup, it just the black screen. I tried to reset the SMC,but doesn't work.
I still in the warranty, if I need to replace the parts, do I need to charge for the replace? Thank you~!

Warranty repairs are ALL FREE!

Macbook Pro won't startup after Update

I guess everyone has been having problems around here. But I really have no clue what to do. I did not even know there was un update until I restarted. After I did it now my macbook pro won't start up. It makes that chime noise at the beginning and then it shows the apple and the spinning thing below it and I left it for 2 hours and came back and nothing had changed.
It my computer broken? Did I do something wrong? Have I lost all my stuff? Please help!

Yeah, I have had the exact same problem. it happen last friday. Also, i'm not sure if this is related or not but right before the update the computer for no reason in the middle of doing stuff it would tell me to force shut down by holding down the power button. not sure what to do. If i ship it out it will be about a 2 weeks before i get it back and if I take it in, they can't put it on the bench for about 5 days. its very frustrating and apple needs to figure something out for service.

Macbook pro won't startup. Stuck on apple logo with spinning wheel.

When I start up my 15 inch Macbook pro, it gets to the apple logo screen with the spinning gear underneath and it just stays there and does not startup. I have let it sit that way for up to an hour and it juts stays on that screen. Please help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

MacBook pro won't startup shortly after Lion install any ideas?

My MacBook Pro will not completely startup. This started shortly after OS Lion download. I've shut it down manually and it still won't startup.

Your assumption was correct I do not understand the messages. Here they are:
12/12/11 5:14:06.000 PM kernel: wlEvent: en1 p2p1 Link DOWN
12/12/11 5:16:02.127 PM mdworker32: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/12/11 5:16:40.295 PM com.apple.kextd: Cache file /System/Library/Caches/com.apple.kext.caches/Startup/KextPropertyValues_OSBundl eHelper_x86_64.plist.gz is out of date; not using.
12/12/11 5:16:40.295 PM com.apple.kextd: Rescanning kernel extensions.
12/12/11 5:16:40.000 PM kernel: Resetting IOCatalogue.
12/12/11 5:16:43.760 PM com.apple.kextcache: rebuilding /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
12/12/11 5:16:44.610 PM com.apple.kextcache: JMicronATA.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
12/12/11 5:16:47.034 PM com.apple.kextcache: JMicronATA.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
12/12/11 5:16:47.503 PM com.apple.kextcache: JMicronATA.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
12/12/11 5:16:49.286 PM com.apple.kextcache: / locked; waiting for lock.
12/12/11 5:17:01.425 PM com.apple.kextcache: / locked; waiting for lock.
12/12/11 5:17:06.504 PM com.apple.SecurityServer: Session 100009 created
12/12/11 5:17:23.875 PM com.apple.kextcache: Created prelinked kernel //System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
12/12/11 5:17:23.920 PM com.apple.kextcache: rebuilding /System/Library/Caches/com.apple.corestorage/EFILoginLocalizations
12/12/11 5:17:28.623 PM com.apple.kextcache: /: no supported helper partitions to update.
12/12/11 5:17:28.624 PM com.apple.kextcache: Lock acquired; proceeding.
12/12/11 5:17:28.631 PM com.apple.kextcache: /: no supported helper partitions to update.
12/12/11 5:17:28.632 PM com.apple.kextcache: Lock acquired; proceeding.
12/12/11 5:17:28.637 PM com.apple.kextcache: /: no supported helper partitions to update.
12/12/11 5:20:45.355 PM com.apple.quicklook: ImageIO: <ERROR> CGImageReadSessionGetCachedImageBlockData *** CGImageReadSessionGetCachedImageBlockData: readSession [0x7fe672421350] has bad readRef [0x7fe672610c60]

Macbook Pro won't startup after 10.9.1 update

Early 2013 Macbook Pro 13" retina running Mavericks.
Installed the 10.9.1 update and left it to do that and when I returned it had restarted in Bootcamp in Windows 8.1
Requested in Windows that it startup in OSX. On starting up OSX a message came up saying there was a problem starting.
It tries to startup a couple of times then a circle with a line though it comes up and it goes no further.
Tried booting into recovery mode to check permissions etc. in disc utility but that's not coming up either.
Any suggestions on what else to try?

Chose startup disk manually:
Hold the Command button during startup, then select your macintosh partition.
Reset the nvram:
Turn on your mac while holding Command-Option-P-R until the chime sounds for the second time.
Safe boot:
Boot while holding down the RIGHT shift button.
If you have a Time Machine, you can use that to restore.
Reinstall via recovery:
Hold down Command-R during boot, then hit reinstall in the menu.
Other than that, you'll have to go to a Genius Bar.
Hope this helps!

Macbook Pro won't startup after installing of 10.8.4

I just installed the 10.8.4 combo update package anf my Macbok Pro won't restart. After downloading the updates, the computer restarted itself, finished installing the updates, restarted itsalf again, anf when it gets to the gray screen with the Apple logo and the rotation icon underneath the logo, it just hangs. It goes no further than that. I let it run for about an hour before I tried to restart it manually, but I could never get it past that final screen. How do I fix it?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

MacBook Pro won't startup - Folder with question mark appears

I have tried multiple times to startup my macbook pro (I am not sure if I have lion or not) and it will only come to a white screen. Sometimes an icon appears that is a folder with a question mark in the middle. I have an external hard drive, but everything is not backed up.
What is going on and what are some steps I can take to remedy this problem.
I have tried Command + R as well as Shift while starting up.

A flashing question mark or globe appears when you start your Mac

15" 2013 Macbook Pro won't startup

Hope someone can help,
My early 2013 15" Macbook Pro Running latest Yosemite public beta (10.10.4) won't boot past the password screen, it was working OK this morning went out for a while and when I got home it looked as though it had restarted. Entered my password and the screen changes to show my user picture and name but no loading bar. I've tried to reboot to safe mode however same thing, no loading bar just user picture & my name. Next I tried booting into the recovery screen (CMD + R+ Power) no luck there either, the apple symbol shows with no progress bar. Next tried booting to internet recovery (Option+CMD+R+Power) again nothing globe comes up but stops spinning after a second. I've tried resetting the NVRAM (Option+CMD+P+R) which reset the NVRAM but did nothing for the problem also tried booting in verbose mode (CMD+V+Power) entered password and got the following:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1FI2)/SATA(0,0)/HD(Part3,SigEB5D
FEAA-7BB1-44F7-93CB-4E6D33B5019B)
boot file path: \System\Library\CoreServices\Boot.efi
...****ERROR _CreateMenuWithWithIdentifier no image for file: 1_flag_menu_item.
png
**** ERROR_CreateMenuWithWithIdentifier no image for file: 72_flag_other_menu_i
tem.png
**** ERROR _LW__PositionUsersCarouselViews No lw->usersCarouselView or lw->singl
eUserView
**** ERROR ArchiveViewCreateWithOptions ArchiveCopyPNGImage failed for file: log
inui_bootprogressbar.png
root device uuid is '*********-****-****-****-************'
I'm at my wits end think I've tried everything and next stop genius bar but hoping someone can help?

Last option prior making an appointment at an Apple store genius bar is a SMC reset:
https://support.apple.com/en-us/HT201295
The evaluations at the genius bar are FREE.
Ciao.

My MacBook pro won't startup

I hear the startup noise and i can see the grey screen, but it won't go past that point. Any idea what's wrong?

You may have to take the computer to the Apple store to have the Hard Drive checked out.
Best.

MacBook Pro won't Startup! Please Help!!

I installed 2 softwares this morning, "USB Screen Lock" and " Logonkey". Both allow u to unlock your mac with a usb drive. After installing USB screen lock i tested it out, put my computer to sleep and then came back a few hours later to test out Logonkey. After downloading the free version on their website and installing it, it requierd a restart. When my mac was turning on, it got stuck after showing the Apple logo. All i see is a gray screen with a spinning circle that comes and goes after a couple of seconds. This same thing keeps repeating for hours. I dont know if it's related to one of the softwares or not. I tried to Safe Boot it but it didnt make any difference. Also reseted the NVRAM/PRAM thingy but it didnt make any difference either.
Please help!! :(

You need to reinstall Lion. If that doesn't help, then there's a deeper problem that could or could not be related to the software you installed.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

MacBook Pro won't reboot. Get spinning circle even after hard drive replaced at Apple Store

MacBook Pro won't reboot. Have to reinstall OSX each time I shut down in order to get it to start up. What could be wrong? I had the hard drive replaced already.

You shouldn't be using the disc at all. I thought I had made that clear. Boot from your recovery partition and run Disc Utility. If you get the same result -- the internal drive can't be repaired -- then you should consider replacing it. No storage device can be trusted, in my opinion, after throwing an error like that. But whether you choose to replace it or erase it, you have to get the data out first.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot from your recovery partition (10.7 or later), a local Time Machine backup volume (10.7.2 or later), or your installation disc (10.6.8 or earlier.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have a working Mac, and both it and the non-working Mac have FireWire ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Macbook Pro won't boot or show partition

I have my macbook pro partitioned with leopard and tiger (for protools) . I also have a copy of leopard on an external hard drive that I boot to occasionally. While on this external drive I had to do a manual shutdown after it froze and now my macbook pro won't show the internal drive partition with leopard on it. It will only boot to the internal partition with tiger on it. Even though I can see the leopard partition on the desktop and access it through tiger it is still not showing up in startup disk. I held the option key during startup and it gave me the choice to choose the leopard partition but after it started to go through booting it would then shut down.
Any suggestions?
I ran disk permissions and repair but its said everything is okay.

I would try Diskwarrior 4.1 and see if that can repair the drive.
btw how did you get Tiger on your Macbook Pro?
My Tiger install DVD will not install on my Macbook pro even though it is a 3.1 version machine.
I need to run Protools as well.

Macbook pro won't boot, stuck on white apple screen

Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
I've powered down and tried to boot up several times.
I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.

Exacty what happens when you try to boot up from the disc that came with your computer? Are you holding down the c key? Have you tried holding down the "option key?" Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you.

MacBook Pro won't startup

Similar Messages

Maybe you are looking for