MacBook Pro wont boot from CD

I just purchased an used MacBook Pro and I lost the password (I had it written down and lost the paper before I could change it). I tried to boot from my copy of Tiger so I could reset the password but it wouldn't boot from the CD. I also tried holding down alt/option and only the hard drive showed up. Any suggestions or options?

You cannot boot an Intel Mac from a retail version of Tiger. You can only boot it from the original discs that came with the computer (two DVD with gray labels appropriately marked.) If the seller did not provide you with the discs then you have been short-changed on your purchase and should contact the seller and insist upon receiving them. Alternatively, you can contact AppleCare and purchase replacements or you can purchase a retail copy of Leopard.

Similar Messages

  • Macbook Pro Wont Boot from Retail 10.6.3 DVD

    Just like the title says.  It wont boot off the retail 10.6 disk I got a couple weeks ago.
    I think my EFI partition might have been corrupted...so I want to repartition the HD and reinstall the OS but the computer wont boot from the DVD.
    Any ideas?

    Hi Alexander,
    If your MBP shipped with an OS later than 10.6.3, it won't boot from that disc. Use the install disc that shipped with your MBP.

  • My MacBook Pro wont boot from CD

    For some reason the factory installed OSX instance on my MacBook pro has corrupted telling me each time I try to boot it that its encountered and error and I'll need to switch my mac off and back on again... OK...
    So after switching my mac off and back on again about 400 times I begin to get the idea that maybe that error message isnt as intelligent as I might like it to be..
    So i've attempted to re-install OSX 10.4.6 from the Install DVD i got with the MacBook pro... However I cant get the laptop to boot from this CD... I've tried: a straight turn off turn back on and the cd spins up but then boots from my default boot device.. I've also tried holding down the C key while the laptop boots, again the cd spins up but no luck.
    Please please please can anyone point me towards what im doing wrong.. I'm a real mac newbie.. And while i love my MacBook pro this is getting really frustrating.. :o(
    MacBook Pro   Mac OS X (10.4.6)   BootCamp installed

    If you have an open firmware password, delete it. It will not boot off anything but HD with OF password. Or at least thats what it was for me.

  • Macbook Pro wont wake from sleep

    My '08 MacBk Pro wont wake from sleep. This has happened several times since I installed Lion. In the past I have simply clicked several times on the trackpad until it woke, but on several occasions it actually shut down after entering sleep mode, (It went to black screen, the little pulsing sleep light was dark and I got no responce to clicks on trackpad or keyboard). When this happens I can usually re-start the Mac with a hard re-boot to resolve the issue. This time however, I can't get the computer to turn on. I've tried pressing the power button once, and all that happens is that the sleep light blinks once along with a the normal whiring sound you hear when the computer is ramping up, but this lasts only a second and then it goes back to black screen/dead Mac. I also tried holding down the power button as I would for a hard reset at which point I get several blinks from the pulsing sleep light and then nothing. I also tried unplugging the cable, removing the battery and pressing the power button for 5 seconds, then reconnecting battery and cable and pressing the power button, (I got these steps from an article posted here on the furums). BTW, I have disconnected all external drives, etc. before trying any of these steps. Please let me know if there's something else I might try to revive my Mac.

    Follow up: I took the MacBook Pro for repair and the tech found that the logic board was damaged - probably due to so many hard resets I had to perform to get the machine to load when starting it up after shutdown or restart. I replaced the logic board, (Very expensive) and its been running fine for 3 days. However, the freezing problem has just started again and I'm worried that having to perform a hard reset to get the macbook to load will cause more damage.
    The problem that's occuring is as follows: When I start the computer up after shutdown, or sometimes after restart, the desktop fails to load and the spinning color wheel appears. I can see the dock and the main upper toolbar but my desktop is blank and my external hard drives do not load. I can't make any selections with the cursor because of the eternally spinning color wheel, so my only option is to perform a hard reset by depressing the power button until the unit shuts down. When I start it up again the system loads correctly. I have tried ejecting my external drives before shutting down, but this doesn't make a difference. This problem started when I installed Lion OS and got continually worse until the computer finally shut down for good and I had to replace the logic board. Now it's starting to happen again.
    Has anyone else experienced this problem running Lion on a MacBook Pro early '08? If so, please help me find a solution for the freezes. 

  • Macbook pro wont boot in safe mode or from CD

    Hey all
    Two days ago my mack book pro (2 years old) fooze giving me a blue screen (dark blue with lines, not the ligthbue, which you se at start-up). I tried change the harddisk and rebooted using the command-r option. I succesfully re-installed mac os using the internet option. Next the macbook work for 1.5 day without any problems. However this evning the computer  brook down again. I recieved the dark blue screen again. I then tried to boot from both a CD and from the internet. However the reboot-keys are not working any more, and I cant get pass the inital start up screen. When tried booting from the CD it recieved the message from the attached image. Can anybody tell, how I will be able to boot the machine ?
    Thanks Dennis

    Dennis,
    if your MacBook Pro is two years old, then it didn’t come with OS X on DVDs — it came with OS X on a recovery partition on the internal hard disk. Your picture shows a version of OS X from 2008, which your two year old MacBook Pro would be unable to run — which is why you’re getting the results that that picture shows.
    You’ll need to repeat the OS X Internet Recovery that you did the previous time; erase your internal disk, and redownload your computer’s original version of OS X from Apple’s servers through the Command-R boot. Once you’ve reïnstalled its original version of OS X and have run Software Update, try running the Apple Hardware Test by holding down the D key as you restart, and then run its extended test, to see if it can detect a hardware problem.

  • Mid 2009 13" MacBook Pro wont boot up.

    The apple store replaced the cable that went to my hard drive on my mid 2009 13" MacBook Pro.  The hard drive still will not boot so they told me to remove it put it in a box and connect it to another computer and save the files.  I have done that and connected it to my father's MacBook Pro.  I can find the external drive but I don't know what to do next. 
    My goal is to save the files on his computer then reinstall the hard drive in my computer and start up in restore mode.  Next I will reformat the drive and move the files I placed on my fathers Mac back to mine.
    Can anyone help me with where I can get step by step instructions to do this?
    Thanks

    I think you mean Office for Mac. In any event, the standard applications will come with the reinstall, like Mail, iTunes, etc. Anything else won't. If you have the original disks the machine came with, the iLife apps should be on there.
    I have to say this... I know you probably don't want to spend money on this, but if the data is important, the better way to handle this is to buy another hard drive. They're cheap. I can tell you how to prep the new drive if you don't know how. Then run Migration Assistant when you're done and let it try to pull over all your stuff from the old drive. Once all that is done, you can reformat your old drive and you'll have something to use for backup. You don't say how big your current drive is, but even a 1TB is well under $100 now. The reason I suggest this is because if you miss anything important on your old drive, once you format it it's gone. The way I'm suggesting, you'd be able to make sure you have all you need first.

  • Mid 2010 macbook pro wont boot, cant find hhd

    I got a 13' Macbook pro, after a kernal panic, the computer stuck at the same page: u need to restart your computer. Later i run restore disk, but is seems cant find my hhd. Most likely i need to chaneg a new HHD?? I tried to search on apple website how much is the HHD but cant find any info. Is there one had same problem and got their HHD changed? Should I fix it thru apple or should i get the HHD myself and find someone to put it in for me? I am out of warranty. Really need help ~~ Thanks

    Later i run restore disk,
    Disconnect all peripherals from your computer. 
    Boot up from the install disc #1. 
    Run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    If you still cannot find your hard drive, Diskwarrior has been known to do so.

  • My Macbook Pro wont boot after upgrading to SSD, A ? Mark on Folder appears

    Hello all,
    I just put in a new SSD into my mid 2012, 13" macbook pro. This is the exact SSD http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=77394 89&tab=7&SRCCODE=WEBLET03ORDER&cm_mmc=Email-_-WebletMain-_-WEBLET03ORDER-_-Deals &utm_source=EML&utm_medium=main&utm_campaign=WEBLET03ORDER&cm_lm=noahbragg@cedar ville.edu
    I swapped out my optical drive and put in the SSD using this tutorial, http://www.ifixit.com/Guide/Installing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Dual +Hard+Drive/13787 Everything seemed to go fine and i had no problems. But when I tried to start up the computer it stayed on a gray screen and a foler with a question mark on it, showed up blanking. I have looked all over for the internet for the answer, I have tried to reset the PRAM but it did nothing. I then tried to select what drive i wanted to boot from by holding the option key when i booted, but when the options came up, SSD or old harddrive did not come up as a way to boot up. There were some internet options to recover but they did not work.
    The SSD has nothing on it at this point, but my plan was to boot up using the original HD and then clone it over to the SSD, but ovbiously i cant even find the HD to boot to. I have seen that people are having troubles with booting to their SSD because of the new mavericks update, but i am just trying to boot to my original HD at this point.
    I also considered that maybe i possibly damaged the HD cables through static electricty, but when i searched more about it i learned that i should have heard snap or felt a jolt. None of these things happened when i installed the SSD. So i beleive that the hard drive or SSD are not broken in any way.
    Does anyone have any ideas or suggestions on how i can fix this? Need my computer very badly! thanks in advance.

    I also forgot to mention that after the first time i tried to boot, it went to the normal screen where it wanted me to put in my apple id password. but the loading wheel was just spinning the whole time. so i turned off the computer and tried again. thats when the question mark folder came up and kept coming up everytime after that.

  • Macbook pro cant boot from external dvd device please help !!!!

    hello everyone please help me i have macbook pro 2011 core i5 version
    i just installed 2.5 ssd as second hdd
    i cant boot from external dvd device to install any os  the external dvd keeps on spining and mac is just thinking it doesnt show press any key to install
    it shows the device when a boot into mac parition  
    i am trying to install windows on origianl 500 gb hdd and linux on ssd
    but not luck
    the external dvd drive works i pluged into my pc and it works
    please help thansk in advance
    200 gb mac
    300 gb windows
    120 ssd linux

    I do not know about Disk Warrior but if you have a compatible OSX on an external HDD you certainly can boot the MBP.  Use startup manager:
    https://support.apple.com/en-us/ht1310
    Ciao.

  • Can MacBook Pro be booted from iMac

    My 2008 15 inch MBP hard drive died
    I verified it by putting it in one of external drive holders and that will not read it either. it has been making noise for a while. Back up every week so I am ok.
    The replacement HD is already formatted for this computer as I use as an external already.
    The screen flashes ?  or if I press Option it just stays gray with curser working
    Tried other HD's
    Checked for cables I may have removed but it is an easy job.
    I don't have Disks can I boot from my iMac?
    Thanks

    Hello jimicocobop,
    To get your MacBook Pro to have an operating system installed you will want to create a Recovery Disk Assistant with a external drive or USB stick. Take a look at the article below to walk you through getting that set up through your iMac so you can then get you MacBook Pro up an running again. 
    OS X: About Recovery Disk Assistant
    http://support.apple.com/en-us/HT202294
    Regards,
    -Norm G. 

  • Macbook pro wont start from disc

    Recently i let a friend barrow my macbook pro and i wanted to completly erase its hard drive and to do that you have to put in the install disc and hold C at startup all of that i understood but the problem is whenever i hold C at start up it just gets stuck at the apple with the pinwhele and just stays there i even let it go overnight and when i woke up the next morning it was still going please help

    The correct DVD for your Mac must be in the drive. The last "Full Retail" DVD for Snow Leopard has only 10.6.3 on it, and will not boot a whole lot of recent Macs. The one that shipped with your Mac will always work, provided your DVD rerader is working.
    If C does not seem to work, try holding down Option at Startup. That brings up the ROM-resident Startup Manager, which draws an Icon for each bootable drive available. Choose the one you want and proceed from there.

  • Have a HUGE problem, MacBook Pro wont boot.

    Hey there so my friend just bought a used macbook pro, and is having a massive problem. The computer originally came with Tiger so we went and got Leopard installed onto it. For the first couple of weeks she had no problem until last night. She went to boot and it got stuck on the blue screen. So we tried everything, we tried starting in safe mode, tried resetting the PRAM. Then we inserted the Leopard install disk and tried to run disk utility, it wouldn't verify or repair the disk permissions, we also tried to just repair the disk which looked like it worked, then rebooted, nothing happened, still got stuck. So we went to our last resort and tried to archive and install Leopard again, it wouldn't... it said that the install failed and that we should contact support. We did that and all they told us to do was archive and install and if that failed then to bring it to the apple store. Does anyone have any other suggestions before we bring it down there?
    Thanks ahead of time for your help.

    Sounds like the hard drive has become seriously corrupted or is failing. Start with;
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Assuming this doesn't work and Archive and Install doesn't work, then you need to erase the drive and install Leopard from scratch. Start with:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the drop down menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    After formatting has completed quit DU and return to the installer. Complete the OS X installation.
    If this does not work then the drive may be bad and should be replaced. This can be done at an Apple service center. If the drive is out of warranty then they will charge for the service and the replacement drive.

  • Late 2011 Macbook Pro Wont Boot into AHT

    My brand new MacBook Pro use to boot into the Apple Hardware Test.
    Recently I was having software problems so I restored my mac from the lion restore partition, now I can’t boot into the Apple Hardware Test. I don’t have restore disks or software disks because my MacBook Pro did not come with them Any Ideas?
    Thanks Kyler

    First off, some other forum members have reported having to hold down Command-D instead of just D to get the AHT to load.
    If that don't fix it, as per this article ( http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh35727.html ) it can be loaded from a USB disk. Since your Mac came with a factory-installed Recovery partition, you can concoct a bootable USB startup disk (hopefully containing the AHT) as per these instructions: http://support.apple.com/kb/DL1433
    Hope this gets you the AHT back.

  • MacBook Pro WONT boot when Firewire Hard Drive is attached....?

    is anyone else having a problem with Booting up their MacBook Pro when they have a firewire device attached?
    I use a Lacie 400Gb External drive and it just wont get past the start screen (grey screen, before the Apple even appears), unless I unplug the firewire drive first...
    I know Apple will fix these bugs, so I really shouldn't moan... but I just wanna double check others are having this problem and I haven't got a dud one!! (or I'll take it back to the Apple Store ASAP!)
    Thanks!!!

    I have this about 50% of the time! I generally have my FW400 drive hooked up, and if I forget, it may or may not boot. I have sent an email about that to apple. Oh, if I was in Windows last, it is not a problem since it remembers it...
    Bob

  • My macbook pro wont boot ... need help

    battery its fully charged and battery indicator work but wont boot?

    Reinstall OS X.
    To reinstall Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    To reinstall Lion:
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Maybe you are looking for