Macbook pro wont open

I downloaded Lion, but after successfully installing it and restarting the my MacBook Pro, it wont open anymore. What will I do? Please help.

It won't open?.... So there is a black screen with a blinking cursor?  I would apprecaite more details.

Similar Messages

  • Macbook pro wont open links

    Hi all, i have a macbook pro and just recently it has stopped opening links. Although its not all things, for example, i cant click and open anything from google unless i right click and open in a new tab. I click on the link and nothing happens, its not only in google that this happens. Ive been getting around it by opening everything in a new tab and hoping it would sort itself out, but it hasn't and it is super frustrating.
    Hope someone can help!

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • My macbook pro wont open up, only just a grey screen

    I've just upgraded my MBP 13" mid2012 from Mavericks to Yosemite. Actually, it has been 24 hours since I did that. I've noticed that it wasreally  really slow.
    Now it just wont turn on. I mean, it turns on but its just a gray screen but no apple logo whatsoever. Ive done the reset nvram, i think. It restarted cause i heard the sound of the laptop resetting, but after that its just a gray screem again. I cant even do internet recovery or safe boot because the apple logo doesnt even appear. Please help.

    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

  • Macbook pro wont connect to internet using cable, but connects using wifi fine

    My macbook pro wont connect to the internet using a cable, but connects using wifi fine.  I use wifi at home but sometimes need to use my laptop at work and connect using a cable but it says i'm not connected to the internet?

    Can you open a terminal and invoke the following commands:
    ping -c 10 localhost
    and
    ping -c 10 google.com
    You should normally get something like:
    PING google.com (74.125.224.103): 56 data bytes
    64 bytes from 74.125.224.103: icmp_seq=0 ttl=55 time=19.053 ms
    64 bytes from 74.125.224.103: icmp_seq=1 ttl=55 time=37.692 ms
    64 bytes from 74.125.224.103: icmp_seq=2 ttl=55 time=46.988 ms
    64 bytes from 74.125.224.103: icmp_seq=3 ttl=55 time=33.466 ms
    64 bytes from 74.125.224.103: icmp_seq=4 ttl=55 time=28.940 ms
    64 bytes from 74.125.224.103: icmp_seq=5 ttl=55 time=58.070 ms
    64 bytes from 74.125.224.103: icmp_seq=6 ttl=55 time=33.335 ms
    64 bytes from 74.125.224.103: icmp_seq=7 ttl=55 time=33.361 ms
    64 bytes from 74.125.224.103: icmp_seq=8 ttl=55 time=36.099 ms
    64 bytes from 74.125.224.103: icmp_seq=9 ttl=55 time=41.111 ms
    --- google.com ping statistics ---
    10 packets transmitted, 10 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 19.053/36.811/58.070/9.939 ms

  • New macbook pro wont accept password

    I moved everything over from my i5 MBP to a new i7 via utilities migration assistant. However the new macbook pro wont accept my password, nor will it recognise the other user account passwords. Works fine on the i5.
    In Disc Utilities, change password asks me to select an image, but does not light up "change" when I select user.
    Any ideas?

    Is you new MBP the 2010 model or is it a newer model running Mountain Lion?
    If it's a newer model running ML, you can simply boot into your Recovery partition (hold down the Command and R keys whilst booting) and when you get to the Recovery window, select Terminal from the Utilities menu. In Terminal, type
    resetpassword
    and hit Return. A small app will open that will allow you to change the password for the user that you select. Then just reboot and use the new password.
    If, indeed, you're running 10.6.4, you'll need the installation disc to use the Reset password utility.
    Good luck,
    Clinton

  • On my macbook pro when opening a page i can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success

    on my macbook pro when opening a page on safaryi can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success?

    Just select Print in Safari and then, in the bottom left-hand corner, select PDF and you can save it to whichever flavor pdf file you like.
    Clinton

  • How come my macbook pro wont play dvds?

    how come my macbook pro wont play dvds?

    Don't know!
    Please describe in detail all you have attempted to do in order to resolve the issue.
    Apple Portables: Troubleshooting the slot load optical disc drive

  • Hi, my MacBook Pro cannot open Safari. nexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

    Hi, my MacBook Pro cannot open Safari. It crashes and gives the message, ' Safari quit unexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

    Remove "Rapport" by following the instructions on this page.
    Back up all data before making any changes.

  • After buying a new Macbook pro and opening an iTunes Match account most of my music is grayed out on my Mac and iPhone. I have not turned on iTunes match on my iPad and all my music is fine.  How do I get my music back????

    After buying a new Macbook pro and opening an iTunes Match account most of my music is grayed out on my Mac and iPhone. I have not turned on iTunes match on my iPad and all my music is fine.  How do I get my music back????

    The most efficacious way to get your music and other personal data onto your new Mac is to restore it from the backup you made of your old computer. Once that is done you can re-enable iTM on the new Mac and your iPhone.

  • Final cut pro wont open after installing universal upgrage

    my Final cut pro wont open after installing universal upgrage, I installed just the FCP 5 from the universal disc i got from apple now it wont open goes almost all the way then simply quits without explanation
    I am afraid to instal the other apps for fear I would lose everything
    whats causing this?

    Download and run FCP Rescue. It fixes a lot of things.
    Shane

  • Macbook pro wont shutdown

    macbook pro wont shutdown

    Holding the power button for 10+ seconds should shut it down.  But that stops all processes, including active read/write activity, mid-step.  Yuor system may not restart because the OS (not the disk drive itself) could be corrupted.
    Try option-command-esc to bring up a list of application to force-quit, that way only certain applications are forcibly stopped instead og the entire OS.

  • My (UK bought) MacBook Air wont open open Chilean (.cl) websites - anyone any idea why?

    My (UK bought) MacBook Air wont open open Chilean (.cl) websites - anyone know why? Or what I can do to change this?

    Go to the main Library folder and look for a folder called Application Support / Microsoft.
    There are a few folders in there, and you may have to do some digging. In one of them (mine is called MAU2.0), there should be a file called Microsoft Autoupdate. Open it.
    It looks like this:
    check the button for manual updates.
    That should let you open the apps without triggering an automatic update.

  • I downloaded acrobat pro, wont open... error 16

    i downloaded acrobat pro, wont open... error 16 - aid to go to your website

    Hey,
    Please refer this KB doc link and try out the solutions for your OS to resolve error 16:
    Configuration error 16 | CC, CS
    Let me know if this works for you.
    Regards,
    Anubha

  • My macbook pro wont do anything and it is just blowing air out the back

    my macbook pro wont do anything it is using its fan rapidly

    Try Reseting the PRAM, It should fix the Problem.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
        Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    http://support.apple.com/kb/HT3964

  • Macbook pro wont shut down without holding the power button nor cycle for updates to restart.

    macbook pro wont shut down without holding the power button nor cycle for updates to restart

    Sorry I said sorta wrong. I can shut down and I can update to the point of restart but it just sat for 45 minutes after an update. It goes through the update and to restart then the bars chase each other in a circle and it never restarts. So I hit the power button and go through normal reboot but loosing the update in the process. It does not matter how long I wait for a natural reboot after an update or click to restart it will chase the little bar in circles all day literally and never reboot.

Maybe you are looking for

  • SAP Management Console as part of Netweaver 7.0

    Hi Colleagues, We are running SAP Netweaver 7.0 with Unix and we have detected that we have a security issue if we leave open the connection to the SAP Management Console via web (http://<host>:5<instNum>13). I have been looking for an alternative to

  • Third-party font-suitcase migration from iMac G3 to iMac G4 Classic Environment

    Hello, I thought I was all set ... successfully installed Appleworks 6.0.3 in the Classic Environment on my "new" Sunflower iMac G4 so I can still use my 3 macros and 2 custom buttons ... and imported my user dictionary as well. That was last week. (

  • After updating to iOS8 my iPhone and iPads no longer autofill name and passwords

    After updating to iOS8 my iPhone and iPads no longer autofill name and passwords It worked fine in iOS7, it still works fine on an older iPhone 4 running 7 and an iPad Air also running 7. Also my Macs, an old MacPro 10.7.5 and a MacBook Air 10.9.5 wo

  • Expecting identifier before right, left bracket; error 1084

    I have the code: private var soundsVector:Vector.[sound, sound, sound] and it is giving me the error code 1084, it needs an identifier before both brackets. My question is: what is the needed identifier.

  • "Flags" are disappearing

    I've posted a CS Review to my client. When I address the comments the client makes and go to "Flag" and mark them as "Done" and "Save" then close the review, when I re-open the review my "Flags" are gone. The client comments are still there but not m