Macbook pro wont start up after trying fsck -y (incorrect block count)

my 2 months macbook pro won't start up after numerous attempts and ive tried fsck -y and it says "incorrect block count for file system.log (it should be 184 instead of 108) help please

it just says start up disk full, its not full however it has at least 10Gb of space left.
Your HD is full! How large is your HD? You should never let your hard drive get to where you have only 10-15% of space left. You need to do some serious housekeeping. However, you need to get to your desktop to do that.
Can you safe boot? Read the threads over in the "More Like This" column over here.----------->

Similar Messages

Macbook Pro Wont Start Up After Update

Hey All,
I was in the middle of installing the most recent update for OSX when my computer froze completely. I shut it off by holding down the power button. Now, when I start it up, right after the apple, it goes to a screen with some script in the upper left hand corner, and a box in the middle with a picture of the power button telling me I need to restart. I've restarted it several times and it just keeps going back to that screen.
I have booted it up from the install DVD and run disk repairs and verifications, as well as checking the system profiler and utility, and nothing seems worng. I've tried starting it up by choosing to start up from the folder and it still didnt work.
If you've got any ideas, let me know. All your advice is appreciated.
Thanks!
Macbook Pro Mac OS X (10.4.8)

I meant to say that the system would have been made unstable after the semi-complete update (if it was in the middle of replacing a crucial system file).
An archive and install would replace all system files, so wouldn't hurt anything. You might have to reinstall any system-intrusive applications (Palm Hotsync springs to mind, if you have that) but it will certainly fix system corruption, if that is your issue.
After the reinstall, if you encounter a complete freeze again, then I would definitely be suspicious of hardware. Possibly the original RAM, but it could be somewhere else in the system, such as the logic board. In those cases, you would have to go back to Apple for repair. (Your Macbook Pro, that is, not you.)
Matt

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

My daughter's MacBook Pro was doing exactly the same thing. I don't know if it had anything to do with the latest update. She called me about a week ago saying that her MacBook began running slower by the day . She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning. I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive. She took it to the Apple store. Originally, they also thought it was the hard drive. It ended up being a corrupted operating system (Lion). Apple genius simply re-installed Lion and she's back up and running. Good thing she backed up right before it crapped out. She'll be restoring everything tonight. Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

Macbook Pro cannot start properly after Yosemite v10.10.3 update

Hello,
I have a serious concern with my MacBook pro 13Inch Retina. After the recent update to Yosemite v10.10.3 on 18 April, whenever I start my Mac book, the Apple icon will not show up immediately as usual just black page. It only appear after I press the power bottom again( or sometimes by luck a 5 mins wait) then the icon will appear and system turns into login page. This is not normal!
Anyone please help! I am not sure if I were the only one experiencing this or this is a bug come with the recent update.
Thanks!

Repair the Hard Drive and Permissions - Yosemite, Mavericks, Mountain Lion or Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.
Now, download and install the OS X Yosemite 10.10.3 Combo Update.

MacBook Pro wont start after 10.8.3 update

So I tired installing the 10.8.3 update from the app store and every time I did it I got the response that it wasn't downloaded properly, first on bad Internet at my house, then at school I used the really fast Internet and it was the same problem. Then I came here found that a bunch of people had the same problem, so I downloaded the combo update from apple.com from a recommendation by someone here
Now its one big shitstorm, after taking a half hour to install on my MacBook Pro ( its a 13 inch i got last august so its brand new), during the install I was on chrome and it kept freezing about 75% of the install complete I tried to shut every program running, that just froze the entire computer for about 5 minutes, let it finish and it said it needed to restart. It said that something couldn't close and it needed to be force quit, so I did that and let it restart.
It turned off, and started the loading screen with the apple and the gear below it spinning, then it froze, a half hour later it didn't change, i shut it off by holding down the power button and tried to start it again now it will go until the screen with the apple and spinning gear comes and then it will just shut itself off after about 2 minutes, tried safe mode, the bar at the bottom will load about 40% then it shuts off,
What do I do now, anything on my own? can i try and take it into the apple store or did I probably loose everything?

It sounds like your internal drive is failing, or has failed. What backups do you have?

Macbook pro wont start up and stuck on a restart screen, after mountain lion installtion failure

I tried installing Mountain Lion on my Macbook Pro and the installation failed because my "hardrive was damage and could not be repaired" it then told me to restart my computer and try again which i did. However i am unable to even get back to my desktop because the Macbook starts up and i get the grey Apple logo and then this screen appears:
Instructing me to restart my computer, it has been stuck on this cycle for a few days now and i have no idea how to fix it.
Any help would be much appreciated
StephBeard

StephBeard,
if you still have your MacBook Pro’s original box, it can be found on one of the stickers on the box. If you don’t still have its box, it can be determined from your MacBook Pro’s serial number. If its serial number has eleven characters, write down the last three characters; if it has twelve characters, write down the last four. If you don’t have its box, please include in your reply those last three or four characters of its serial number.

Macbook Pro not starting up after 10.9.3 install

Hi everyone. I have a mid-2010 15 inch Macbook Pro. After putting it off for some time, I went to install the 10.9.3 update. However, after installing the update, the computer won't start!
A progress bar appears under the Mac Logo during start-up, but it only gets about 1/5th of the way through, when the bar disappears and then the mac shuts down. I've attempted this at least 5 times and it always does the same thing.
I held option during start-up to boot into the Recovery disk, and tried to repair the partition (I also have a bootcamp partition), but it said it was unable to repair. What's my next step? I have a time camp back-up from 50 days ago, so I could restore from that but it wouldn't be ideal. Is there a way to backup my files in it's current state in anyway?
Any and all help is appreciated. Thanks!

Hey NickinTampa,
Thanks for using Apple Support Communities.
Looks like the computer won't start and you have tried repairing the disk. This article gives several other ways to try and resolve startup disk issues.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
Have a nice day,
Mario

Macbook pro wont start with 3 beeps

hi
Few months back I purchased a refurbished macbook pro (late 2012 model) with i7 processor and 8 GB ram. Now after 2 months I experienced problem with mac - it wont start with 3 beeps. I looked at different articles in net and found about no memory bank problem. I opened the back and changed slots and it seemed to fix the issue. However the issue was recurring few times and ram was changed. Again the issue seemed to have resurfaced. I tried with memtest in single user mode and RAM passes the tests.
What else could be the issue around the macbook pro. Do you suggest taking it to local Apple store to get it checked?
Thanks

Test each module installed alone while switching slots (power down before switching and remove battery.) Do both modules work alone in each slot? If they do, then it would appear the memory is good as are the slots. So, something else is at play and only an Apple Store has the equipment to go further - make a Genius Appointment and take it in for service.

Bad System call. Macbook pro wont start up

Hello,
I seem to have come across a problem. I thought it happened after trying to install new software through X11. I restarted my macbook pro and received about 15 error messages all containing information about certain extensions not being installed properly. I remember one being about my 802.11 airport but I havnt altered anything to do with it.
When I turned my macbook off and on again I got a black screen with info about about bad system calls, throttling too quickly etc..
I noticed a number of people mentioning the i tunes update which I tried to install before it completely died and it wouldnt actually finish the update so i just force quit software updates. Now my machine doesnt do a thing: when I turn it on I receive the apple symbol with the spinning cog and eventually it goes back to the black screen with the bad system info.
I started in single user and tried fsck - fy and it said everything was ok. I tried to start in safe mode however when I turn my macbook pro on I dont hear the chime- therefore I dont seem to be able to enter safe mode.
If anybody can help ASAP it would be much appreciated- got lots of work that needs doing on it:)
cheers
Graeme

Try here > Mac OS X: Gray screen appears during startup

Macbook pro wont start, click when charging thats it

Hello,
I have a Apple Macbook Pro 15" model number: A1286 purchased in january 2011.
It wont start and has a very faint clicking noise when it is trying to charge. When the charger is on it the light is bright green but the charge button to show you the life left in the battery will not work as wont the screen or anything else.
Could someone asist me and let me know whats wrong with it please.
Regards,
Jimmy

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue.

Macbook Pro wont start up (Apple logo and spinning thing all I get)

When I turn on my macbook pro I get the “tone” the Apple logo and the spinning thing but then the spinning thing just freezes up and does nothing for ever. I let it just site like that for 30 minutes then it just goes to black. It is plugged in so power is not an issue.
I tried to boot up in safe mode and again I get the tone the logo then the bar to show the safe mode then the spinning thing then nothing. I did boot it up via firewire target mode and was able to see the hard drive and all my files on my imac so the hard drive works (I think).
I do have the original install disk and am willing to start the computer fresh but have no idea how.
So any suggestions???
I also tried to turn on and run the repair mode I think that’s where I held down a key the screen went black and some commands ran then I typed somting like flvr - fv
Thanks Brad

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Help me! My macbook pro wont turn on after sudden shutdown error

My macbook pro 13" mid 2012 wont turn on after a sudden shut down i dont know what happen please help ive tried to reset SMC but it didnt get any better please help me

Try Resetting the PRAM

Macbook pro wont start up and clicking sound

Hi everyone
My girlfriend spilled a coke on my computer couple days ago and my MBP shut down immediately. After all i took it to the apple store in Turkey and they said the problem is from the battery and they took it off and I started to use it on charge until i get a new battery. All day i used my macbook pro on charge without battery on it. Anyway I turned my computer off and next day press the power button to start it up and it didnt start up at all. Mag safe works OK. Charger light is green light and everytime i press the power button I hear a clicking sound and my built in cam light is lighting up. I couldnt figure it out what is wrong.. If you guys had any problem like this before or know the problem about it please share it with me.. I will be appreciated.. Thanks

Problems related to liquid damage can manifest in different ways.
It is hard to recover from liquid damage.
Best.

Macbook pro wont start flashing question mark.

I sold a macbook pro i owned since new and it arrived with the buyer yesterday now im getting death threats!
I freshly installed 10.5 leopard on my mbp and used it for 4 hours without issue.
I did have a problem after installing ms office and deleted it and all preference files in same folder and worked ok after that. rebooted 3 times no problem.
The buyer is freaking out saying its trashed and wont boot just has a flashing question mark, why would this be happening???
Please help he's threatening me!

Just replace the hard drive.
If he lost data, look at data recovery services*:
http://www.macmaps.com/backup.html
And in the future always recommend people backup important data frequently.
If he still gives you death threats, call the police.
- * Links to my pages may give me compensation.

SMC reset now macbook pro wont start

Hi,
I was having trouble charging my macbook pro (summer 2011), so I restarted it, and nothing changed. Then I tried resetting the smc, after doing this every time I turn the computer on it goes to the grey screen with the apple and the circle thing with a bar underneath, it takes a little while for the bar to load, and at the end just when its about to finish the computer shuts off. Then I noticed that the charger simply had a cut in it, probably from a cat. I tried to hit cmmand r and reintall the OS but when I select the drive it says that I cannot choose that drive, but it is the only option. I also tried to repair the hardrive, but it didnt seem to do anything.

try holding power button for 10 sec after that
turn off the mac completely
as soon AS you hit power button press following 4 keys
Option + Command + P + R
that should reset it

Macbook pro wont start up after trying fsck -y (incorrect block count)

Similar Messages

Maybe you are looking for