Macbook pro wont start up and clicking sound

Hi everyone
My girlfriend spilled a coke on my computer couple days ago and my MBP shut down immediately. After all i took it to the apple store in Turkey and they said the problem is from the battery and they took it off and I started to use it on charge until i get a new battery. All day i used my macbook pro on charge without battery on it. Anyway I turned my computer off and next day press the power button to start it up and it didnt start up at all. Mag safe works OK. Charger light is green light and everytime i press the power button I hear a clicking sound and my built in cam light is lighting up. I couldnt figure it out what is wrong.. If you guys had any problem like this before or know the problem about it please share it with me.. I will be appreciated.. Thanks

Problems related to liquid damage can manifest in different ways.
It is hard to recover from liquid damage.
Best.

Similar Messages

Macbook Pro, Wont start everytime, just clicks and flashes the light????

Hi there,My Macbook Pro does not always turn on first time, it takes awhile to click on, it just clicks every time I try to turn it on, It turns on when its warm though, it also turns off when I close the lid, but the light says it is on, after leaving the lid closed for more then 5 minutes, and I open the lid it is turned off? I do not understand what is cuasing the problem? Can anyone help me?

Did you try resetting the SMC and PRAM?

Macbook pro wont start up and stuck on a restart screen, after mountain lion installtion failure

I tried installing Mountain Lion on my Macbook Pro and the installation failed because my "hardrive was damage and could not be repaired" it then told me to restart my computer and try again which i did. However i am unable to even get back to my desktop because the Macbook starts up and i get the grey Apple logo and then this screen appears:
Instructing me to restart my computer, it has been stuck on this cycle for a few days now and i have no idea how to fix it.
Any help would be much appreciated
StephBeard

StephBeard,
if you still have your MacBook Pro’s original box, it can be found on one of the stickers on the box. If you don’t still have its box, it can be determined from your MacBook Pro’s serial number. If its serial number has eleven characters, write down the last three characters; if it has twelve characters, write down the last four. If you don’t have its box, please include in your reply those last three or four characters of its serial number.

My macbook pro wont turn on and is making a bleeping noise

my macbook pro wont turn on and is making a bleeping noise

the following article addresses startup tones and beeps for the mac:
http://support.apple.com/kb/HT2538
also try doing SMC reset:
http://support.apple.com/kb/HT3964

My macbook pro wont do anything and it is just blowing air out the back

my macbook pro wont do anything it is using its fan rapidly

Try Reseting the PRAM, It should fix the Problem.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
http://support.apple.com/kb/HT3964

Macbook pro wont start, click when charging thats it

Hello,
I have a Apple Macbook Pro 15" model number: A1286 purchased in january 2011.
It wont start and has a very faint clicking noise when it is trying to charge. When the charger is on it the light is bright green but the charge button to show you the life left in the battery will not work as wont the screen or anything else.
Could someone asist me and let me know whats wrong with it please.
Regards,
Jimmy

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue.

Macbook Pro wont start up (Apple logo and spinning thing all I get)

When I turn on my macbook pro I get the “tone” the Apple logo and the spinning thing but then the spinning thing just freezes up and does nothing for ever. I let it just site like that for 30 minutes then it just goes to black. It is plugged in so power is not an issue.
I tried to boot up in safe mode and again I get the tone the logo then the bar to show the safe mode then the spinning thing then nothing. I did boot it up via firewire target mode and was able to see the hard drive and all my files on my imac so the hard drive works (I think).
I do have the original install disk and am willing to start the computer fresh but have no idea how.
So any suggestions???
I also tried to turn on and run the repair mode I think that’s where I held down a key the screen went black and some commands ran then I typed somting like flvr - fv
Thanks Brad

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

MacBook Pro wont start, and is to hot

My Macbook Pro won't start and the bottom of it pretty hot. The light comes on like its in sleep mode, but wont power up.

nosaj49854 wrote:
Thank you very much, it just started back up, i thought thats what the problem might of been.
You're welcome. Glad it's working for you again.

Installed new memory and Macbook Pro wont start.

I bought a total of 8GB from PNY for my mid 2009 MacBook Pro (2.8GHz Intel Core 2 Duo). I installed it and my macbook wont turn on. When I press the power button it just beeps. The LCD doesnt turn on. I reinstalled it a few times to make sure that it is sitting correctly with no luck. I reinstalled my old memory (2x2gb) and it works fine.
The new memory I bought is PNY 8GB (2x 4GB) Bual Channel DDR3 PC3-10666. The package says that it is compatiable with 1333MHz and 1066MHz. This is the listed memory on the PNY website for Mac laptops.
Am I using the worng type of memory? I'm pretty sure my MacBook Pro can take 8GB...right?
THANKS!

One beep indicates no RAM installed. See http://support.apple.com/kb/HT1547.
What happens when you reinstall the old original memory? Does the computer boot then?
You might want to read the information at macsales.com (OWC). Certain models had to be updated to take additional memory.
Specifically the NOTE: on this page: http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3

Macbook Pro wont start, but pretenfs like it is going to and then turns off

So, I opened a game, the Mac crashed and, won't turn back on. Itll turn on for a few seconds and play that loud noise and appear like it's functioning properly and the little bar fills up a tiny bit but then it turns back off and repeats if I prompt it...any help?

Howdy xVaGuEx,
If your MacBook Pro is shutting down unexpectedly durning startup, I would suggest that you troubleshoot using the steps in this article -
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Macbook Pro makes a faint/light clicking sound.

I just recently purchased my macbook pro and over the last week, I noticed a light/fint clicking sound on the right side of the keyboard. I do not think it is the hard drive because it has not been slow or lagging or anything else and I verified the disk in disk utility and it said the HD is "okay", so I figured it is not a hard drive problem. It only starts when I've had it on for a few minutes It is only noticable when in a very quite room or when you really concentrate on the noise. Anyone have any idea what it might be if it is not the hard drive?

Thanks! I am getting it looked at just in case because when I first started up the computer right out of the box it was a little slow at first but once everything was installed and working it has been fine ever since, I was also reassured when I verified the Mac HD and it said it was okay and did not need to be repaired. So I am hoping it is just the fan or the optical drive, which are two things I wouldn't be concered too much about.

2012 Macbook Pro wont start or charge

So my macbook pro 13in was around 20% before i went to work then when i came back to it, The Macbook pro would not start and so i pluged it in and the charger light flickerd from green to amber back and forth. I then tried my charger for my older 2009 Macbook White polycarbenite and when i used that ones charger the light just stayed off but i did know that ones charger did work with the Pro. My guess is the logic board is fried some how or the battery has faild but my guess would be that it would still be able to start even with a bad battery. The Mac will not make the start up sound or the led trun on.. on the frount of the computer.
Thanks for your help
Gino

Connect the charger that came with the machine to a good power source with not a lot of other items on the same power line from the circuit breaker.
Connect it to the Mac and perform a SMC Reset here and let it charge up for a few hours or overnight before using it.
1. SMC reset
>>Instructions to reset SMC
Disconnect other non-Apple and external hardware except (if applicable) a mouse and keyboard until your finished repairing your machine.
Problems solved: Fans blowing with no activity, machine is not booting, power button pressed and nothing happens, problems with indicators, Magsafe has wrong lights, battery is not charging, monitor and graphics issues etc. If the battery is not charged (from like letting it sleep too long), let the Mac charge up awhile afterwards.
Will not hurt the machine resetting if it's not broken.
Other related hardware problems (optional):
Check battery status: Hold option/alt key down while clicking on the battery icon in the menu bar, top right corner.
Magsafe: Use the correct/matching power supply charger with your Mac, not a less powered one from another Mac.
Apple: Laptop won't power up Apple: Computer won't power up Troubleshooting optical drive
Magsafe problems Magsafe problems more
No power on still? Data Recovery options: Is my personal data lost? Find the closet Apple repair/distributor
If that doesn't work, please make a appointment with Apple for a repair or evaluation, also if you haven't yet purchased AppleCare you should do so as well as a couple of backup drives.
Most commonly used backup methods

MacBook Pro wont start after 10.8.3 update

So I tired installing the 10.8.3 update from the app store and every time I did it I got the response that it wasn't downloaded properly, first on bad Internet at my house, then at school I used the really fast Internet and it was the same problem. Then I came here found that a bunch of people had the same problem, so I downloaded the combo update from apple.com from a recommendation by someone here
Now its one big shitstorm, after taking a half hour to install on my MacBook Pro ( its a 13 inch i got last august so its brand new), during the install I was on chrome and it kept freezing about 75% of the install complete I tried to shut every program running, that just froze the entire computer for about 5 minutes, let it finish and it said it needed to restart. It said that something couldn't close and it needed to be force quit, so I did that and let it restart.
It turned off, and started the loading screen with the apple and the gear below it spinning, then it froze, a half hour later it didn't change, i shut it off by holding down the power button and tried to start it again now it will go until the screen with the apple and spinning gear comes and then it will just shut itself off after about 2 minutes, tried safe mode, the bar at the bottom will load about 40% then it shuts off,
What do I do now, anything on my own? can i try and take it into the apple store or did I probably loose everything?

It sounds like your internal drive is failing, or has failed. What backups do you have?

Macbook pro wont start with 3 beeps

hi
Few months back I purchased a refurbished macbook pro (late 2012 model) with i7 processor and 8 GB ram. Now after 2 months I experienced problem with mac - it wont start with 3 beeps. I looked at different articles in net and found about no memory bank problem. I opened the back and changed slots and it seemed to fix the issue. However the issue was recurring few times and ram was changed. Again the issue seemed to have resurfaced. I tried with memtest in single user mode and RAM passes the tests.
What else could be the issue around the macbook pro. Do you suggest taking it to local Apple store to get it checked?
Thanks

Test each module installed alone while switching slots (power down before switching and remove battery.) Do both modules work alone in each slot? If they do, then it would appear the memory is good as are the slots. So, something else is at play and only an Apple Store has the equipment to go further - make a Genius Appointment and take it in for service.

My macbook pro wont switch on and the power cable light doesn't illuminate

Any ideas please? The macbook pro won't start up.. I colosed it down with the power switch. It now wont' switch on and the power clable doesnt light up. the computer is 8 months old

Try Intel-based Macs: Resetting the System Management Controller (SMC), but if that fails then make a Genius Appointment and take it in for service.

Macbook pro wont start up and clicking sound

Similar Messages

Maybe you are looking for