Macbook Pro wont start up (Apple logo and spinning thing all I get)

When I turn on my macbook pro I get the “tone” the Apple logo and the spinning thing but then the spinning thing just freezes up and does nothing for ever. I let it just site like that for 30 minutes then it just goes to black. It is plugged in so power is not an issue.
I tried to boot up in safe mode and again I get the tone the logo then the bar to show the safe mode then the spinning thing then nothing. I did boot it up via firewire target mode and was able to see the hard drive and all my files on my imac so the hard drive works (I think).
I do have the original install disk and am willing to start the computer fresh but have no idea how.
So any suggestions???
I also tried to turn on and run the repair mode I think that’s where I held down a key the screen went black and some commands ran then I typed somting like flvr - fv
Thanks Brad

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Similar Messages

2011 Macbook Pro white screen after apple logo and spinning wheel

Hey there guys,
My 2011 Macbook Pro has encountered some problems. Firstly while i was at school, i opened up my computer, usually the computer would require you to type your password, but my login page became fuzzy, white lines everywhere. So I restarted my computer and everything was okay. After that i came back home, my computer was running fine, after surfing the net for a few hours, my whole computer suddenly became blue. So what i did was i just restarted my computer, after that my computer would boot up Apple logo would come up, the spinning wheel would also come up, after 30-40 secs it would turn black screen and come back on as a white screen and would just stay like that. It would be on the white screen. Tried some rebooting ways but all didn't work.
1st: I wanna know whats the problem?
2nd: Is this a harddrive failure? (Because i have alot of important documents and personal stuff in my hard drive and i hope it isn't a crashed hardrive)
Thanks for your help..
PS: Im running on Moutain Lion, but i have no idea what version it is.

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Macbook Pro, Wont start everytime, just clicks and flashes the light????

Hi there,My Macbook Pro does not always turn on first time, it takes awhile to click on, it just clicks every time I try to turn it on, It turns on when its warm though, it also turns off when I close the lid, but the light says it is on, after leaving the lid closed for more then 5 minutes, and I open the lid it is turned off? I do not understand what is cuasing the problem? Can anyone help me?

Did you try resetting the SMC and PRAM?

MacBook pro wont start up, just switches itself of.

After pressing the power botton on My MacBook pro it showes the Apple logo and a spinning gear that starts to load and then it just turns of again. The Mac is fully charged. Is there anything I can do?

Reset the PRAM > Resetting the PRAM

Apple logo and spinning circle only on startup - never loads

I foolishy changed permissions on the whole volume to try and give a new user Read&Write permissions to the whole volume and set it to propagate the new permissions down through the whole volume, and now when I power on my MacBook Pro, I see the Apple logo, a spinning wheel for a few minutes, and then it reboots itself, never loading the OS. I searched these forums and the internet for hours last night. It seems pretty clear from my research that I caused problems by changing permissions.
I can't boot into Safe mode.
I can boot into single user mode.
I can book to the install CD and run Disk Utilities.
I've tried Repair Disk and Repair Permissions from the Disk Utility several times. Verify Disk never finds any problems, but no matter how many times I run the Repair Permissions option, I still get a very long list of "ACL found but not expected on <filenames>. . .]"
I also found countless sites with instructions on running commands in single user mode:
mount -uw /
and then tried all of these suggestions-
chmod 775 /
chmod 1775 /
chmod o+r /
and a host of other variations
I do have BootCamp with Vista installed, and can boot into Vista with no problems, so it would seem the HDD itself is physically fine.
Any suggestions?
Snow Leopard is set to arrive before 3 pm today by FedEx. Would running the Snow Leopard upgrade from the boot CD correct any remaining permission issues when it over-writes what's currently there? If you're not sure, any ideas on how to proceed with fixing the current 10.5.8 installation?
Thanks in advance. I'm at my wits end, and very groggy from fighting this all night
Message was edited by: San Diego Darin

Actually, that wasn't the end of the log. My apologies.
There are quite a few errors.
Examples:
Could not connect to USB mux port 32498 for device 2: Permission denied
Dubious permissions on file (skipping): /Library/LaunchAgents
Dubious permissions on file (skipping): /System/Library/LaunchAgents
Dubious permissions on file (skipping): /etc/machinit_per_loginsession.d
SystemStarter 33: "/Library/StartupItems" failed sanity check: path was created after boot up
SystemStarter 33: "/System/Library/StartupItems" failed sanity check: path was created after boot up

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

My daughter's MacBook Pro was doing exactly the same thing. I don't know if it had anything to do with the latest update. She called me about a week ago saying that her MacBook began running slower by the day . She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning. I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive. She took it to the Apple store. Originally, they also thought it was the hard drive. It ended up being a corrupted operating system (Lion). Apple genius simply re-installed Lion and she's back up and running. Good thing she backed up right before it crapped out. She'll be restoring everything tonight. Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

MacBook pro 15" 2008 freezes at apple logo and spinning wheel

Have a MacBook pro early 2008 have installed lion but recently started to have problems. Started to freeze a lot so I would restart and most of the time it would work untill it froze again , now it's got worst every time I restart my Mac it won't go past apple logo and spinning wheel just freezes have been trying and trying but same thing freezes. Tried to start in save mode but no still freezes
Please has anyone got any suggestions thanks

The startup disk may need repairing.
Use Lion Recovery
Not enough free space on the startup disk can cause the system to freeze.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.

Macbook starts up with chime then white screen with grey apple logo and spinning gear appears and continues to spin

Help, Turned on MacBook Pro this morning and just get a white screen with grey apple logo and spinning gear. Cannot access desktop.

Computer starts up in Safe boot by holding down the shift button. But when I go to restart the same thing happens. What should I do?

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.

If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

My macbook is not starting properly, remains white screen as it is with apple logo and spinning gear

my macbook is not starting properly, remains white screen as it is with apple logo and spinning gear

Hi..
Your profile indicates you are running Lion v10.7 so you need to use Lion Recovery to repair the startup disk if necessary or reinstall Mac OS X.

TS3931 I cannot get my Macbook air to move off the start up screen with the Apple logo and spinning gear. HELP!!!!

I cannot get my MacBook Air to move from the gray start up screen with the Apple logo and spinning gear. Please help

I cannot get my MacBook Air to move from the gray start up screen with the Apple logo and spinning gear. Please help

Please help me! MacBook Pro stuck on apple logo and spinning wheel

Hi I'm really desperate and need help! My MacBook just stopped loading and would stay on the gray screen with the apple logo and spinning wheel.
I have tried safe mode and it would load a little and stop and then the loading bar would be blank and it would stay like that forever!!
I also have tried doing the single user mode and when I type the fsck - fy it will do a couple more lines then it will say error like a hundred times :(
I did verbose mode and it would just give me stuff that I have no idea what it saying I left on verbose mode for like 5 hours and it would just give me lines of stuff I have no idea what it's saying!
I downloaded lion through apple store so I don't have the disk I only have my snow leopard disk
Please please someone tell me a solution it's my moms laptop and I don't want to get in trouble!

Reboot in recovery mode an possibly repair over the internet.
Command-R to the rescue.
Just hold down Command-R during startup and OS X Recovery springs into action. It lets you choose from common utilities: You can run Disk Utility to check or repair your hard drive, erase your hard drive and reinstall a fresh copy of OS X, or restore your Mac from a Time Machine backup. You can even use Safari to get help from Apple Support online. And if OS X Recovery encounters problems, it will automatically connect to Apple over the Internet.
http://support.apple.com/kb/HT4718

My macbook wont reboot apple logo and spinning wheel thats it.

I watched youtube videos and tried command r and now it keeps popping up you need to restart your computer. Everytime I restart it, it pops back up! HELP!!

Apple logo and spinning wheel is different than the need to restart your computer message.
See this Apple note on the spinning wheel at boot. If you are running OS X 10.7 or later, then rebooting with the command and r keys will get you into recovery mode, where you can use Disk Utility to repair the hard drive.
FYI, the need to restart your computer message in multiple languages is called a kernel panic, which is usually, but not always, caused by a hardware issue. If you have OS X 10.7 or later, you should be able to run the Apple hardware test. Prior to that, you need the disks that came with the system to run it. If you can run it, run the extended test when prompted, which can take over an hour to run.

Macbook Pro Stuck at Apple Logo and Spinning Wheel

I Have ML. Just did the most recent update. There seemed to be a bundled group of updates. Once all was updated, my computer froze. I shutdown and restarted and it was stuck on the Apple Logo and spinning wheel. I have tried everything. Safe Mode, Command R, Command/Alt/R/P....it does nothing. Any advice out there?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Macbook pro boots past the apple logo then gets stuck on white screen

I have a macbook pro that won't boot all the way. When I turn it on it will go to the apple logo, and proceed past it then get stuck on a white screen. If you leave it on this white screen after a little while a grey ribbon will come across the top with little white squares and rectangles. The picture comes up like this [IMG]http://i863.photobucket.com/albums/ab198/helmerfan/60350C7C-C4F6-4040-A081-388B5 4FF77ED-2239-00000184408A3AD1.jpg[/IMG] (not sure if this will work) http://s863.photobucket.com/albums/ab198/helmerfan/?action=view&current=9F4716F1 -3DE1-4799-A87A-9E8E5E918EF2-3530-00000378A8CDCED1.jpg#!oZZ5QQcurrentZZhttp%3A%2 F%2Fs863.photobucket.com%2Falbums%2Fab198%2Fhelmerfan%2F%3Faction%3Dview%26curre nt%3D60350C7C-C4F6-4040-A081-388B54FF77ED-2239-00000184408A3AD1.jpg
I took the hard drive out and tried to start it up with just the os x disk, and still got the same thing. I took the disk out and the hard drive out and then got the folder with the question mark. Someone said that it sounded like a graphics card issue, and if you all agree do you think that that would be something that a reflow would fix? Thanks for the input guys.

I have a macbook pro that won't boot all the way. When I turn it on it will go to the apple logo, and proceed past it then get stuck on a white screen. If you leave it on this white screen after a little while a grey ribbon will come across the top with little white squares and rectangles. The picture comes up like this [IMG]http://i863.photobucket.com/albums/ab198/helmerfan/60350C7C-C4F6-4040-A081-388B5 4FF77ED-2239-00000184408A3AD1.jpg[/IMG] (not sure if this will work) http://s863.photobucket.com/albums/ab198/helmerfan/?action=view&current=9F4716F1 -3DE1-4799-A87A-9E8E5E918EF2-3530-00000378A8CDCED1.jpg#!oZZ5QQcurrentZZhttp%3A%2 F%2Fs863.photobucket.com%2Falbums%2Fab198%2Fhelmerfan%2F%3Faction%3Dview%26curre nt%3D60350C7C-C4F6-4040-A081-388B54FF77ED-2239-00000184408A3AD1.jpg
I took the hard drive out and tried to start it up with just the os x disk, and still got the same thing. I took the disk out and the hard drive out and then got the folder with the question mark. Someone said that it sounded like a graphics card issue, and if you all agree do you think that that would be something that a reflow would fix? Thanks for the input guys.

Macbook Pro wont start up (Apple logo and spinning thing all I get)

Similar Messages

Maybe you are looking for