Macbook Pro wont turn on after suddenly shutting down. PLEASE HELP

I was working when both the charger light and computer went off suddenly. I did the same click sound it does when holding the power button to force it to shut off. Since then its dead to the point that when I connect the charger the little orange/green light doesnt turn on nor does the computer nor does the battery meter on the side of the computer. Battery was perfectly good holding charge and it was full.

I did an appointment which I will attend to. But that's for Monday as they were pretty booked. I called the store and asked whether I could just walk in and wait for someone to miss their appointment, the lady said over the phone they would take care of walk ins too, so I took the chance. This is my working tool, without it I was off completely so I needed a solution asap, not for next week. But I soon as I walked in they come up saying they were not taking walk ins. That's what got me upset, their saying yea come over and once there Oh sorry we r not taking walk ins.
Hope I made that clear this time.
So the sim is still there, I wouldn't want to try and get it out, so for that I'll wait till Monday. Meanwhile I need to figure out what caused that to see what I do with the computer or how to avoid that from happening again.

Similar Messages

  • Help me! My macbook pro wont turn on after sudden shutdown error

    My macbook pro 13" mid 2012 wont turn on after a sudden shut down i dont know what happen please help ive tried to reset SMC but it didnt get any better please help me

    Try Resetting the PRAM

  • MACBOOK PRO WONT TURN ON AFTER A REPLACE THE DISPLAY?

    MY MACBOOK PRO 13' WONT TURN ON AFTER I REPLACE THE DISPLAY ?

    Can you boot from your install disc?
    Apple Portables: Resetting the System Management Controller (SMC)
    MacBook Pro: Distorted video or no video issues
    (I dont have any appstores in my country)
    AASP's Outside of the USA
    User Groups

  • My macbook Pro wont turn on after getting new battery

    I had one of the defective batteries which eventually just died on me. I had mac send me a new one. After switching the new battery with the old one I expected my laptop to work fine. After pressing the power button a number of times the laptop eventually turned on. I would have to sit there for a few minutes but it would work. After about a day of this the laptop will no longer turn on. The power light is on and it makes the regular noises accompanied with turning on the computer and the laptop is registering the power adapter but it wont turn on. One thing of note is that it makes a strange noise for about 3-5 seconds occasionally when I turn it on. Anyone have any ideas?

    Take it in for repair at a local authorized service center. Sounds like there is an issue with the power manager.
    P.S. Please read this tip as you seem to confuse what "mac" and "Apple" refer to:
    http://discussions.apple.com/thread.jspa?threadID=503342&tstart=10

  • Macbook pro froze during partition. after force shut down it, a part of hard drive lost

    2011 15' Macbook Pro with Mountain Lion.
    I was trying to use Bootcamp to install windows. Somehow I got confused and used disk utility to partition my hard drive and get 100gb for windows (before that it was 500 gb with 260gb free). And after 10 minutes the computer froze and I could do nothing but force shut down it. Rebooted and disk utility shows that it has 160 gb free space now. I repaired disk and permissions but none of them worked.
    How can I get my 100 gb back? Help pls
    Thanks

    Check this link and see it any info will help.
    http://pondini.org/OSX/DU.html
    edit: added this discussion.
    https://discussions.apple.com/message/19213226#19213226

  • Hi!macbook pro wont go pass the apple logo!please help!!

    hi guys,well i bought this macbook pro on ebay from the states for about 1400 dollars!well its just the third day and its not bootng uo,the first time i tried to turn it on it took around 20 mins,i deleted some acounts tht we there too but tht didnt help either,and now on the third day i hv tried to reset the pram and tried to turn it on in the safe mode but its just stuck on that grey apple page with that thing curson running clockwise!its a 17inch laptop and its got 2.93 ghz of processor and 8 gb of ram,it has 500gb of hard drive,i m pretty new to apple stuff so i dont knw wht to do now,and i didnt get the repair and the other discs either!!please help!!!!!!!!!!thanks

    You will need a compatible OS X installer DVD to do anything. If the machine qualifies i would purchase a copy of Snow Leopard ($29 USD.) Then I would contact AppleCare to order replacement discs for the computer.
    Once you have a usable installer disk I would start by erasing the drive and installing OS X from scratch.
    Drive Preparation and Snow Leopard Installation
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. Upon completion of formatting quit DU and return to the installer. Now install Snow Leopard following the onscreen instructions.
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site. I don't know the Australian equivalents but  you can start with this info.

  • Macbook Pro WEAK monitor hinge AFTER apple repair! PLEASE help!

    Hey everyone, I am using a 2010 MBP with a 15" hi res display. I had the computer for 3 months with no problems and then the display broke (wouldnt turn on) so apple replaced it. Once they replaced it, i noticed the display was not as strong. To help you all understand this better, let me give you some background information. I am a DJ and music producer and I play at various venues quite often. The problem I am having, is when my computer is on my laptop stand, and the bass hits from the venues sound system, the monitor will wobble down when placed on my laptop stand (http://www.safecomputingtips.com/blog/wp-content/uploads/2008/11/irizer-laptop-s tand.jpg). This NEVER happened before the display was replaced, nor does it happen on my 13" 2009 MBP. To get a sense of what im talking about, if you watch the end of this video (http://www.youtube.com/watch?v=hmN9p9z3KgA) it demonstrates how the screen will fall down with just gravity. While no one would ever use a computer like that, while it is on the laptop stand its position is very similar. When he holds the macbook body vertical, it causes the screen to fall down with gravity. Before my macbook was replaced, it NEVER did that. My 2009 MBP has had TONS of wear and tear and doesnt do that. I went into the apple store and tried it on EVERY macbook pro in the store, 13 15 and 17 inch models, NONE of them fell with  gravity. This started happening when i got the screen replaced. I have gone into the apple store and have had the display replaced for weak hinges 2 or 3 times now, and every time i get it back it is no better. My computer was out of repair yesterday, I took it into apple tonight (20 mins ago) and I was told by a manager that this is within "normal" specs for a "normal" user. Which is true, this wouldnt bother anyone who doesnt use a laptop stand and plays in clubs; but i do. He told me there is nothing he can do, and that I would just have to deal with it (of course he said it much nicer). What i dont understand is that I paid 2,800 for a computer that worked PERFECTLY until the screen died, and once it was replaced due to APPLES fault, now i must deal with a problem caused originally by apple. When I DJ with my 2009 model, no problems. My thought process is that maybe because the original screen is not on the unit, the replacement may not be as sturdy because it wasnt built with the unit itself. For example, my 09 mbp has had no replairs and its fine. The models in the store i assume have had no display repairs, and theyre all fine. The manager agreed that my hinge was weaker than the rest of the stores' models, but even though it was weaker it was within "normal specs", and he wouldnt budge. I'm sure a new unit that has been built together will fix this problem, but he would not give me a new unit. Is there ANYTHING I can do to help this? I am going to a different apple store tomorrow and hope the manager is a bit more understanding in the fact that not all apple computers are put through "normal" use and therefore should not be judged with "normal" specs. When my computer was new it NEVER ever ever did this, and I feel like I bought applecare for that exact reason, so that for at least 3 year i have the computer I bought. Any any any help would be greatly appreciated, I am 19 going and paying my way through school and if i didnt have to pay for school I would just say screw it and I would buy another unit, but i cant. Thanks for reading this, i really appreciate it.

    Unfortunately, spoke way to early.  The fan issue is still a big problem.  From the second the machine is turned on, the fan cranks up.  Frankly, I think this is overheating the machine to some extent (running the fan at max speeds when it's not even warm).  Additionally, the noise caused by this has only gotten worse, and now it is even making a "whistling sound."  Looks like I'm going to be making the trek to the Genious Bar, but based on comments by others on this issue I am not optimistic about a fix.

  • MacBook Pro 15" won't turn on after a shut down.

    My MacBook Pro 15" late 2008 mavericks won't turn on after a shut down. Tried SMC reset, plugged and unplugged charger multiple times as well as installing the battery. It has started that after a while I have replaced my old battery with a new one,upgraded to Mavericks and increased my memory to 4GB. In the beginning after I would install every time the battery ,it' would turn on after 8-10 tries. Today it's completely unresponsive . Tested different outlets, with and without battery,nothing worked. I also heard that some other people have this issue once they have updated their operating system from  10.5.8 to Mavericks. Is that the problem.? Has anyone found a solution to this?

    Hi there Olgabinou,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    -Griff W. 

  • After installing Mavericks my MacBook Pro and my MacMini can't shut down, only a grey screen and finish. Must be killed by the power button. Why?

    After installing Mavericks my MacBook Pro and my MacMini can't shut down, only a grey screen and finish. Must be killed by the power button. Why?
    Nach der Installation von Mavericks kann ich weder das MacBook Pro (2 x 2.4 GHz) noch den MacMini (2 x 2.66 GHz) herunterfahren. Es bleibt ein dauerhafter grauer Bildschirm. Nach 20 min habe ich einen erzwungenen Neustart durchgeführt.
    Ausserdem startet die Macs wesentlich langsamer als mit OS X 10.6.8.

    same here...  sometimes it works, most of the time it doesn't!!

  • Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

    Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
    Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
    Thanks for your assistance.

    If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • My macbook pro wont turn on and is making a bleeping noise

    my macbook pro wont turn on and is making a bleeping noise

    the following article addresses startup tones and beeps for the mac:
    http://support.apple.com/kb/HT2538
    also try doing SMC reset:
    http://support.apple.com/kb/HT3964

  • MacBook Pro wont turn on; But fan is spinning?

    MacBook Pro wont turn on; But fan is spinning
    Already tried reseting the
    p-ram
    SMC
    Removing the:
    ram
    battery
    hard drive
    MacBook Pro 13in- 2010

    your screen may be broken connect an external monitor. 

  • My MacBook Pro ran out of battery and shut down ,will power up but goes   to panic screen on start up but nothing else , how can I get past this screen to try  to fix problem?

    MacBook Pro battery ran low and computer shut down , after charging battery I tried to start up and I got an Apple on a gray screen with spinning wheel that went to a panic call out screen and that's as far as it will go. I've tried start up with command keys ,a few got me to a different screen but nothing has let me into any place I can use to try and repair problem. Anybody have an idea of what's wrong with my laptop and a way to fix it ?

    see if you can start up in safe mode.  What is safe mode?

  • My MacBook Pro will not allow me to shut down it says it is still importing photos into iPhoto it also will not quit

    My MacBook Pro will not allow me to shut down my computer.  Their seems to be a glitch in the iPhotos.  It says it is still importing photos into iPhoto.  It will not allow me to quit either.

    You could always hold down the power button to force the MacBook to turn off. This is usually a last resort step though, but if nothing else is working and you are sure it isn't importing photos then you might consider it.

  • I inserted a burnt disc into my macbook pro and iTunes froze, had to shut down my mac in order to eject the disc.  Is it not possible to transfer music from homemade cds onto my mac?

    I inserted a burnt disc into my macbook pro and iTunes froze, had to shut down my mac in order to eject the disc.  Is it not possible to transfer music from homemade cds onto my mac?

    Yes, it is possible.
    You had an issue in this individual instance.

Maybe you are looking for

  • Get / Cast a Java Object

    Does anybody know how to get (or Cast) a Java Object returned from a Java method call ? Example: <cfset someList = object1.method1(someString, JavaCast("float",someNumber),...)> This method returns a list of Java object of type "Object2". ie. it retu

  • [SOLVED]Systemd: noftify-send running but not displaying

    Hello, I'm trying to get systemd to run a command that pops a notification on screen for me to get up and move around a bit (for my health). The script works if called in the command line and seems to be running fine in systemd. No notification is be

  • Ethernet Cable Hookup

    Hello, this may be quite a stupid question and all, but I need some help when referring to a good, thorough hookup with my etheret cable to my Mac. I've had this hookup for a few months since we got the Mac now and it's done okay ( also recently foun

  • Weird problem w. mysql 4.0 when inserting  into a table with auto_incremet

    Since I upgraded my mysql database from 3.23 to 4.0.1 the following code does not work anymore: I get this error msg: <b>"Invalid argument value: Duplicate entry '2147483647' for key 1"</b> <code> package mysql4test; import java.sql.*; class test { p

  • Corrupted sound files

    Instrument sound files on my 3rd party stand-alone audio apps (particularly Native Instument apps like Kontakt and Bandstand) become corrupted and distorted after a couple of uses for some reason> I can restart, or sometimes just go to system Sound P