Macbook Pro working fine then, after shutting lid, suddenly won't start up
I've been working on my Macbook Pro with no problems. I've been carrying it around with me today, never turning it off but, obviously, closing it. Then plugging in again and continuing with no problems at all. This evening I was working on it, again all fine, when I shut lid whilst it was still on (as I always do) but when I opened it again the screen is black and it won't start up again. It seems like it's trying to start (the light keeps flashing and the fan makes sounds) but then it doesn't start. The power adaptor light is green. I've tried plugging in to different sockets. I've tried starting up without the battery, and also taking the battery out and putting it in again. What could be wrong and what should I do? Really urgently need help!
Many thanks in advance if you're able to help,
Lisa
Ps: I've written that my OS is X10.5 but I can't remember what it is really and because I can't turn my computer on I can't check. It was bought early 2008 and I haven't updated the OS since then...
Welcome to Apple Discussions!
Your early 2008 MacBook Pro may have developed this problem:
http://support.apple.com/kb/TS2377
You'll need to take it in to an Apple Store to be tested--Apple has a special test they can run to diagnose this problem. If this is what is wrong, you will get a free repair.
Your Mac originally shipped with Leopard, which is 10.5, and if you haven't upgraded the OS, that is what you have.
Good luck!
Similar Messages
-
Itouch 5th gen was working fine then I shut it off and it wont turn on. tried itunes and when its siting here it heats up badly
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The hotness indicates a possible hardware problem. If the iPod is defective and not abused Apple will exchange it at no cost -
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
macbook pro works fine except when i try to get my e-mails it say server error, what is wrong
You need to provide more info please. What's the exact error? What email client? Who's the email account through? When the last time your email worked without issue? Do you remember something changing right before it stopped working?
-
Linked server using kerberos working fine then after inactive for 10 minutes start receiving the anonymous logon error
Hi,
This Could be a double hop problem or some thing could have gone wrong with your SPN
This could also be non trusted Service Account under which your SQL Server is running
Check the following links
http://blogs.technet.com/b/askds/archive/2008/06/13/understanding-kerberos-double-hop.aspx
http://blogs.msdn.com/b/sql_protocols/archive/2006/12/02/understanding-kerberos-and-ntlm-authentication-in-sql-server-connections.aspx
https://technet.microsoft.com/en-us/library/cc739474(v=ws.10).aspx
Hope this helps
Thanks
Bhanu -
hi, i am in a wifi (macbook pro) works fine but ipad2 and iphone doesnot work but shows as connected into wifi (wifi defenetley works) ? anybody can help
Make a Genius Appointment at the Apple Store, take your laptop in and get them to help you upgrade it.
-
is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.
Have you seen this article yet?
iPod won't turn on
B-rock -
Linked server using kerberos working fine but after leaving the session inactive for 10 minutes is startin to fall down to ntlm and receive the anonymous logon error
we are connecting to SQL mgmt studio app published on citrix, using Windows authentication and Kerberos to forward the credentials to the linked servers and avoid the double hop issue, that part is working fine, we already have the Constrained
delegation, SPNs and Active directory settings for the Service accounts and the authentication is working, we can connect to the linked servers without errors, it's only whe the Session get idle when we faced the issue, the citrix team already have verifyed
any timeout setting and they mentioned there is no 10 minute timout setting anywhere, we also looked at the Kerberos AD Global policy settings to see if maybe the kerberos service ticket was expiring, but the configured values are Maximum lifetime
for service ticket 600 minutes Maximum lifetime for user ticket 10 hours Maximum lifetime for user ticket renewal 7 days, if you have any other suggestion please let me know. -
MacBook Pro sometimes stays on after shut-down and drains the battery.
Sometimes my MacBook Pro stays on after I shut it down and it drains the battery until it dies. I return home to find it the clocks and everything have to be reset. It appears to be shut-down after I select that command, but on occasion it will remain on in a semi-on state and i need to force quit it w/ the power button. It usually shuts down ok, but this happens every once in a while and I have to continually double-check that it's off before leaving it. Otherwise, I will come back and the battery will be very warm and the machine is running, but not really on. Any ideas?
Problem solved by my own. But do not how :) magsafe again working and the laptop tooo
-
2010 MacBook pro working fine to extremely slow overnight
My macbook pro has been working great for the 3 years I have had it, never a problem. I open it up yesterday morning and it is now the slowest most frustrating computer I have ever worked with. Every operation takes minutes to perform. From opening a finder window to saving a text document.
Ive checked activity monitor and there doesnt seem to be anything eating my cpu %.
Ive restarted several times (takes about a half hour to do), waited hours and come back and its still the same problem. It doesnt seem to be indexing right now either.
What could have gone wrong? What should I check? How can I fix it?
Thanks!Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below to select it:
syslog -k Sender kernel -k Message CSeq "I/O error" | tail | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command.
Normally the window will be empty. If you get output like this:
kernel[0] <Debug>: disk0s2: I/O error
the boot drive is failing, or there's some other hardware fault in the storage subsystem. -
MacBook Pro works fine - Powerbook G4 won't backup
I was wondering if someone can help me. My MacBook Pro is fully backed up on the TC and working well with TM. My wife's 12" Powerbook G4 has access to the TC and the internet but every time I try to do her initial back up on the TC her computer eventually freezes.
In addition to that, now when I try to start the intial backup - it says that it is trying to backup 120GB, which is a mystery to me since she only has an 80GB harddrive.
I would be grateful for any help.Welcome to Apple Support Communities. We're all users here.
Have you tried an SMC reset?
http://support.apple.com/kb/HT3964 -
Additionally, the wifi icon at the top of the screen has an exclamation mark on the MacBook Pro that doesn't connect. We've tried restarting the machine, the Time Capsule but nothing has helped.
Just called Apple Support and it turns out we had the settings wrong. We're all set now!
-
It powers up, gets to the login screen, accepts my entry, then stops.
(NOTE: Running original start-up disk, I noticed OS on computer is 10.5.8 and the disk is 10.5.7)
My actions/results:
Verifiy Disk:
- Incorrect block count for file system.log (Should be 920 instead of 463)
Checking Volume Information:
-The volume Macintosh HD needs to be repaired : ERROR: File system verify or repair failed
- (popup) First Aid Failed. Disk Utility stopped verifying "Macintosh HD" because of error. File system verify or repair failed.
Repair Disk:
- Incorrect block count for file system.log (Should be 920 instead of 463)
- The volume Macintosh HD was repaired successfully
Verify Permissions:
-Permissions differ on "private/var/log/secure.log" - Should be -xx-------, th
-Group differs on "Library/Preference Panes" - Should be 0, group is 80
-Permissions differ on "Library/Preference Panes" - Should be (xxxxx-xx-x)
-ACL Found but not expected on "Applications/Time Machine.app"
-ACL Found but not expected on "Applications/Utilities"
- Permissions repaired successfully -
I am using Windows Vista. My itunes launched fine until now. Now I get an error - "The Itunes application could not be opened. The required folder cannot be found". I have no idea what file it is looking for. Has anyone seen this error?
I have also tried to uninstall the package and I get the error Could not access network location %APPDATA%\. And it won't uninstall. I don't know why it's complaining in both cases.
Itunes was working 3 weeks ago with no problem.
HELP!!!hey did u ever get you itunes fixed?
-
I've had my ipod nano for almost a year. It has worked fine. All of a sudden it has started to repeat. I've tried everything. Help!
It's pretty easy to accidentally set the Nano to repeat. Have a look at the manual (download the manual here) on page 21.
Maybe you are looking for
-
Analysing Dimensions and assigning the char
Hello Experts, I have the following requirement Selection:Companycode,Chart of Acconts,Fiscalyear,period O/P: G/L account,costcenter,amount in local currency,WBS element. I am using standard data source 0fi_gl_4 and stadard ODS 0figl_O02 and this doe
-
The situation: I want to use basetext font, but some of the glyphs are missing in it, and are highlighted with pink boxes. common font [stix, etc.] have much more glyphs than basetext font. I can apply common font [stix, etc.]manually for each of the
-
Installing HTML DB on the existing AIX oracle 9.2.0.4 database
Hi, I am new to HTML DB and want to know how to install this on the existing oracle 9i database at AIX 4.3.3 OS. Can anyone please tell me is it possible to install on the same existing oracle home or does it have to be installed in a separate Oracle
-
Want to show 'y' by pressing x on screen.
Plz give me ideas either to use canvas and g.drawstring or textfield. Infact my device donot support repeated key events and if there is some device supporting this please tell me. In j2se if we want key events than we do this TextField t=new TextFie
-
How to stop apps from crashing upon opening or crashing while in use?
Some apps when i open them they either crash write away or after a few seconds. Also some apps only crash when i go on certain parts of them, for example when i try to upload a picture on instagram it crashes but if im just browsing others pictures i