Macbook procannot reset time and date

I have macbook pro (2009).  The time and date has been set to prior to 2008 and does not allow me to modify.

Back up all data.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Please triple-click anywhere in the line below on this page to select it:
sudo date 0109000014
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Try again to set the date.

Similar Messages

  • How do i reset time and date on my itouch

    how do I reset time and date on my itouch?

    Go to Settings>General>International and make sure that Calendar is set to Gregorian.
    Bext
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Ibook G4 shuts down unexpectedly and resets time and date

    More and more frequently my iBook will shut down completely unexpectedly when not plugged in. This happens regardless of how much battery life it has or it claims to have (80%, 40%, 20%, 12%). It will not start up again from battery only. When I plug the computer and restart it, it has reset time and date to Wed March 31 1969, 19.31 pm. It alerts me that the time is set to before 2001 and this may lead applications to behave erratically.
    Is this normal? Why is this happening?
    I have a few months left of my APP, but that doesn't cover battery related problems, right?

    Hi astaver and welcome to Apple Discussions.
    If you are still using the original battery from a nearly 3 yrs old iBook then it is almost certain that the battery has reached the end of its useful life. The symptoms you describe more or less confirm this.
    To check on battery health go to the Apple Menu>About this Mac>More Info>Power>Battery and copy/paste the info into a reply.
    You can also download and install Coconut Battery which gives a GUI to the same info.
    You are right in assuming that Applecare doesn't cover you for a dead battery of this age but you might like to see if you qualify under the iBook & PowerBook G4 - Battery Exchange Program.
    Good luck,
    Adrian

  • I own an old PowerBook G3 that turns o only on battery. And, even so, always resets time and date. Whenever I connect the power cable, it turns off.

    I own an old PowerBook G3 that turns o only on battery. And, even so, always resets time and date. Whenever I connect the power cable, it turns off. In addition, I a interested in refurbishing my old G3. And, a lesser old G4 LCD that shows a yellow vertical hair-width stripe.
    Thank you in advance.

    What model PowerBook? The internal PRAM battery has discharged and is not recharging. You'll need to replace the battery. This site has instructions. http://www.ifixit.com/Browse/PowerBook
    The PRAM battery is not easy to change on some PB G3 models. I changed the battery on a Wallstreet model. Had to totally disassemble to do it. Bought the replacement battery on eBay.
     Cheers, Tom

  • Unable to reset time and date after a software upgrade

    unable to reset the time and date after a software upgrade on the TV

    hello
    I'm having a similar problem with my macbook. I just did a software update and now I can't get onto my internet. I checked the network diagnostics and the connection is fine, except when i click on the safari icon nothing happens.
    Can anyone help with this?
    Thanks!

  • Why is my macpro reseted time and date?

    Ok,eventually my macpro reseted his date and time to something about 2001... The point is,that i bought this laptop from a friend few months ago, and i even forgot to ask for a login password,and after that and didnt even consider reseting users. The problem with the time and date change,came another problem,i cant even use safari regulary,on sites such is facebook,or even apple .com,without getting a verification security verisign,without blocking the site that i am trying to get in to. Only way is to "trust" that site is manually sign it as "trusted" with your login and a password from your mac. Which i dont know,even my friend dont know the password,the one that i bought it from. Just to make some things straight,its not stolen,i bought it from an original owner,no matter how awkward this situation looks like. Thanks in advance for a any ideas.

    Hi all
    I have the same problem. When I put the touch to sleep, it seams that during the sleep phase, the time stands still and after power it on again, the time & date is reseted to the default settings.
    Hope someone have an idea or a solution for this problem.
    Cheers, istvan72

  • I have to reset time and date after booting

    My mac pro cannot hold date and time.
    so far, I have replaced the pram battery and done the pram reset several times.
    at first i noticed that the sys pref panes were unlocked when I went in to change the time and date but I have since cured that in sys pref/security.
    the governing factor seems to be wetherr or npt is a revoot or completely cold boot (mains power switched completely off)
    the expected message comes up i.e. " your system clock is set to a time and date before 1.1.2008 some progs may bave erratically blah blah "
    the actual time has reset to 1.1.2001 ( dont know if that is significant but mentioned it just in case).
    So, if i just shut the machine down and then boot it up again, no probs
    if i restart, no probs
    shut down and pull the plug ??   1dt, Jan 2001
    would appreciate some advice

    Click here and ask. If they tell you to call, and they probably will, accept that.
    (123024)

  • MSI 760GM-P34 (FX) restarts and resets time and date

    this motherboard started resetting itself, especially on Facebook.
    I will be surfing or whatever and it will shut down and restart.
    I get the normal windows error that it shut down unexpectedly and then everything loads normally.
    if I shut it off completely, then restart, I get one beep then two beeps and it resets the time and date to 2012.
    I have replaced the battery, reset the bios with the jumper, tested the hard drives , CPU,  power supply, card reader, video card, and everything else. All checked out fine and in working order.
    the computer seems to run fine as long as I don't shut it off or as long as it don't reset its self.
    the temp is around 70 degrees and everything seems fine otherwise.
    what could be causing this?
    I like MSI boards but I'm thinking of going with ASUS or another brand if this motherboard is taking a crap after only 2 years. (I bought it Brand new)
    MSI 760GM-P34 (FX)
    AMD Phenom 2 X4 955 Black Edition..Never overclocked
    XFX PRO 650 WT Power Supply
    8 gigs Crucial Ballistic DDR3  memory
     Hyper 212 Plus CPU cooler
    Geforce 9800GT video card
    Seagate 320 GIG SATA HD
    Seagate 500 Gig SATA HD

    Quote from: badboy2k on 17-June-14, 15:46:27
    if you do not have it installed already download MSI Control Centre from here http://www.msi.com/support/mb/760GMP34_FX.html#down-utility&Vista%2064 and install it! start the program and click overclocking-Basic and see what it says the DRAM voltage is set to there!
    it basically goes from " Core" X 800 - 2173.5  and "Ratio"  X 04 -X 10.5
    CPUID HWM  shows this:

  • What cause Macbook Air A1237 time and date always return from an older date when it restarts? I have tried to reset its PRAM and still it has the same issue.

    So here is the story,
    1. First, this Macbook Air A1237 always display the wrong date and time every time I open it after shutdown.
    2. The Battery always in zero percent and not charging at all.and the magsafe always in color orange.
         *also the battery displays the colored black plug that states it was plug in using the power cord.
    I need help on how to fix this issues.I'm hoping for your kind assistance.
    Grazie Mille!
    Ciao Ciao!
    Regards,
    Freddierick Llarina

    Hi,
    Had similar issue with the same model. It works with power adapter plugged in, but not with battery alone.
    You need to get the battery replaced.
    Cheers,
    Clarence

  • Unable to reset time and date after update

    ANyone know how to update date and time after most recent update?  Not doing automatically

    Hello john.george,
    You may need to verify that TCP port 123 is open and available for use on your router.
    TCP port 123 is used to communicate with a network time server.
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Cheers,
    Allen

  • Mac time and date screwed up!

    hi , so my MacBook Pro died today and when i turned it on the time and date had been set back to Sunday December 31 2000... well obviously that is not the right date so i tried to change it by going to date and time preferences. It wont open!!! I have no idea how to change it back now! I cant access most websites including my most used... google. and it limits me on ALMOST EVERYTHING! Please help!

    macbook procannot reset time and date

  • Loosing time and date

    My macbook suddently looses time and date - it switses to year 2000.
    Would a reset of PRAM be a solution? Or.....????

    Welcome to the Discussions!
    That would be normal since what you are really doing is resetting the PMU.
    http://docs.info.apple.com/article.html?artnum=14449
    Joe

  • MacBook Pro is forgetting time and date and wep password

    Hi,
    My Macbook Pro is forgetting the time and date even though I have automatically set time and date checked.
    It is also forgetting it's wep password.
    This is a pretty new computer.
    I've seen a few posts about this, but it doesn't seem like anyone has a solution yet. Any ideas would be much appreciated.
    Thanks

    I'm having the same problem and it started right after the Apple Store replaced the logic board in my MacBook. Every time I restart the computer, it says that none of my wireless networks can be found and when I select my network, I have to re-enter the password. It warns me that the date and time were forgotten. Also, two firewall alerts come up asking if I want to allow access to a DNS agent and something else that seems to be related to wi-fi access.
    I'm considering tossing out some preference files or resetting the NVRAM as troubleshooting measures.

  • Time and date reset bug

    hu guys, recently ive been experiencing a time and date reset bug, sometimes when i open up my computer it says something like your date is set to (i forgot the exact date but the year is 2001) so i change it back to the correct time and date, im not sure how i got the bug, can anyone help me fix this problem, its beginning to be annoying. thanks in advance!!

    Sherwin,
    Those symptoms indicate that you need to get your backup (PRAM) battery replaced.If your computer does not retain parameter RAM (PRAM) settings when it is turned off, this generally indicates that the battery needs to be changed.;~)

  • IPhone 4S time and date keeps resetting, despite being set to automatically do so.

    After having recently upgraded my iOS to 7.0.4, my Verizon iPhone 4S has started to re-set the time and date every now and then at random. It does this, despite me having my Settings set to automatically set the date and time based on my location. I have called Verizon about this and all they had me do was to reset my network connections and reset my roaming capabilities...and despite me doing that this morning, the time re-set itself again this afternoon. I have found the only solution has been for me to power off my phone completely and then once on again, set the phone either into Airplane mode for a second - or to just wait until the Verizon signal switches the phone back to being the correct time and date on its own. I have also found that these issues have started to affect my ability to send and receive iMessages, as well. For some reason, when the date/time re-sets, the iMessage option becomes un-selected and I have to manually go back and turn that functionality back on. Anyone else having these same issues? It's incredibly frustrating and I'm not sure what else I can do save for constantly hard, re-starting my iPhone everytime I notice the time and date is out of whack. Also it's hard for me to tell if this is an Apple hardware issue/bug that just needs to be fixed - or something to do with Verizon. Any tips/info would be appreciated.

    Try setting your time to manual. This way, the iPhone is the one controlling the time. As you correctly understand, when it is on auto, it is controlled by Verizon and their individual towers. If after setting the time to manual it works, then I would say it isn't a phone issue, but a Verizon one. Do you frequent the same area when this occurs? It could very well be an issue with a particular tower in your area and Verizon would need to check that. If the time goes off again while on manual, then it could be the phone. User troubleshooting is restart, reset, restore from backup and restore as new. Try each in order until the problem is fixed. If it cannot be, then make an appointment at the Genius Bar at Apple to have the phone looked at for hardware issues.

Maybe you are looking for

  • Different passwords for different share points on 1 server?

    On a lion server I have two share points. A 'general' is accessible for all users, a 'confidential' is for a select group of users. The permissions are set and the select group have their server access password in their key chain. The server password

  • Change custom step labels programatically

    I want to change the step label progrmatically  based on the string variable in the step specified. Ex: If a step contains a variable "Local.name",(names: TOM, MAT).  When ever we change the name from 'tom' to 'mat' the corresponding name should be d

  • Adding Image to JTextArea

    Hello All, I need to add an Image to a JTextArea. Any ideas plz. best wishes Issac

  • Blank screen everytime I log in

    Hi there, this just started this morning when I fired up my laptop after it had been shut down for the night I entered my password and it just goes to a blanks screen. The background LED light comes on but thats it. I've tried restarting and putting

  • Tabbing Between Forms

    Hi Im working on a poll about people style life in housing and homes later, after the identification of person, i go to the housing tab and in the las question ask the number of homes..... it look like something like this: Well, that what i need its