Macbook Randomly Restarting After Yosemite install

Hi, i have 2011 MacBook Pro (13 Inch), which keeps shutting down and restarting. I've attatched the full error report. Can anybody shed any light on what the problem could be ?
I have updated to Yosemite. The only big change that I made so far was to do the following in order to get my M-AUDIO firewire audio interface to work after the upgrade to Yosemite:
  sudo nvram boot-args="kext-dev-mode=1"
Not sure if its related.
Anonymous UUID:       986C2087-702B-E44D-2D18-49DC4CF8A8A4
Sun Oct 26 11:43:37 2014  
*** Panic Report ***
panic(cpu 2 caller 0xffffff802381e80a): Kernel trap at 0xffffff802350e058, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff815bb5d000, CR3: 0x0000000004509001, CR4: 0x00000000000626e0
RAX: 0x00000000000008c0, RBX: 0xffffff815bb5d000, RCX: 0x0000000000000118, RDX: 0x00000000000008c0
RSP: 0xffffff8124d1b8e8, RBP: 0xffffff8124d1b930, RSI: 0xffffff815bb5d000, RDI: 0xffffff812dd52000
R8:  0x0000000000000a00, R9:  0xffffff812dd52000, R10: 0x0000000000100024, R11: 0x0000000000000000
R12: 0xffffff812dd52000, R13: 0x0000000000000026, R14: 0x00000000000008c0, R15: 0x0000000000000a00
RFL: 0x0000000000010206, RIP: 0xffffff802350e058, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff815bb5d000, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff8124d1b590 : 0xffffff802373a811 
0xffffff8124d1b610 : 0xffffff802381e80a 
0xffffff8124d1b7d0 : 0xffffff802383a443 
0xffffff8124d1b7f0 : 0xffffff802350e058 
0xffffff8124d1b930 : 0xffffff7fa5a891d6 
0xffffff8124d1b9f0 : 0xffffff7fa5a88ec1 
0xffffff8124d1ba60 : 0xffffff7fa5a73fb5 
0xffffff8124d1bb30 : 0xffffff8023d016e6 
0xffffff8124d1bb60 : 0xffffff8023d02878 
0xffffff8124d1bbc0 : 0xffffff8023d00003 
0xffffff8124d1bd00 : 0xffffff80237ea517 
0xffffff8124d1be10 : 0xffffff802373e91c 
0xffffff8124d1be40 : 0xffffff80237235a3 
0xffffff8124d1be90 : 0xffffff8023733e8d 
0xffffff8124d1bf10 : 0xffffff802380a142 
0xffffff8124d1bfb0 : 0xffffff802383ac66 
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelHD3000Graphics(10.0)[CAE2DE9E-751D-31F1-B6BE-410FAE7 DFB00]@0xffffff7fa5a60000->0xffffff7fa5ac6fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3f24000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7fa49b2000
BSD process name corresponding to current thread: WindowServer
Boot args: kext-dev-mode=1
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x0000000023400000
Kernel text base: 0xffffff8023600000
__HIB  text base: 0xffffff8023500000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 10402348495654
last loaded kext at 999357155259: com.apple.filesystems.msdosfs     1.10 (addr 0xffffff7fa5f01000, size 69632)
last unloaded kext at 175156244181: com.apple.driver.AppleUSBUHCI     656.4.1 (addr 0xffffff7fa472e000, size 65536)
loaded kexts:
com.rogueamoeba.InstantOn     6.0.1
com.m-audio.driver.firewire.dice     2.4.2
com.oxsemi.driver.OxsemiDeviceType00     1.28.7
com.apple.filesystems.msdosfs     1.10
com.apple.driver.AppleBluetoothMultitouch     85.3
com.apple.driver.AudioAUUC     1.70
com.apple.driver.AppleHWSensor     1.9.5d0
com.apple.driver.AGPM     100.14.37
com.apple.filesystems.autofs     3.0
com.apple.iokit.IOBluetoothSerialManager     4.3.0f10
com.apple.driver.AppleOSXWatchdog     1
com.apple.driver.AppleMikeyHIDDriver     124
com.apple.driver.AppleHDA     266.5
com.apple.driver.AppleMikeyDriver     266.5
com.apple.driver.ApplePolicyControl     3.7.21
com.apple.driver.AppleUpstreamUserClient     3.6.1
com.apple.driver.AppleThunderboltIP     2.0.2
com.apple.driver.AppleLPC     1.7.3
com.apple.driver.AppleSMCLMU     2.0.4d1
com.apple.driver.AppleBacklight     170.4.12
com.apple.driver.AppleMCCSControl     1.2.10
com.apple.iokit.IOUserEthernet     1.0.1
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.driver.AppleHWAccess     1
com.apple.driver.AppleHV     1
com.apple.driver.AppleIntelHD3000Graphics     10.0.0
com.apple.driver.AppleIntelSNBGraphicsFB     10.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport     4.3.0f10
com.apple.driver.AppleSMCPDRC     1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin     1.0.0
com.apple.driver.SMCMotionSensor     3.0.4d1
com.apple.driver.iPodSBCDriver     1.7.0
com.apple.driver.AppleUSBTCButtons     240.2
com.apple.driver.AppleUSBTCKeyboard     240.2
com.apple.driver.AppleIRController     327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
com.apple.BootCache     35
com.apple.iokit.SCSITaskUserClient     3.7.0
com.apple.driver.XsanFilter     404
com.apple.iokit.IOAHCIBlockStorage     2.6.5
com.apple.driver.AppleUSBHub     705.4.1
com.apple.driver.AppleSDXC     1.6.5
com.apple.driver.AirPort.Brcm4331     800.20.24
com.apple.iokit.AppleBCM5701Ethernet     10.1.2b3
com.apple.driver.AppleFWOHCI     5.5.2
com.apple.driver.AppleAHCIPort     3.0.7
com.apple.driver.AppleUSBEHCI     705.4.14
com.apple.driver.AppleRTC     2.0
com.apple.driver.AppleSmartBatteryManager     161.0.0
com.apple.driver.AppleACPIButtons     3.1
com.apple.driver.AppleHPET     1.8
com.apple.driver.AppleSMBIOS     2.1
com.apple.driver.AppleACPIEC     3.1
com.apple.driver.AppleAPIC     1.7
com.apple.driver.AppleIntelCPUPowerManagementClient     218.0.0
com.apple.nke.applicationfirewall     161
com.apple.security.quarantine     3
com.apple.security.TMSafetyNet     8
com.apple.driver.AppleIntelCPUPowerManagement     218.0.0
com.apple.driver.IOBluetoothHIDDriver     4.3.0f10
com.apple.driver.AppleMultitouchDriver     260.30
com.apple.AppleGraphicsDeviceControl     3.7.21
com.apple.kext.triggers     1.0
com.apple.iokit.IOSerialFamily     11
com.apple.driver.DspFuncLib     266.5
com.apple.kext.OSvKernDSPLib     1.15
com.apple.iokit.IOAudioFamily     200.6
com.apple.vecLib.kext     1.2.0
com.apple.iokit.IOFireWireIP     2.2.6
com.apple.driver.AppleGraphicsControl     3.7.21
com.apple.driver.AppleSMBusPCI     1.0.12d1
com.apple.driver.AppleBacklightExpert     1.1.0
com.apple.driver.AppleSMBusController     1.0.13d1
com.apple.iokit.IOSurface     97
com.apple.driver.AppleHDAController     266.5
com.apple.iokit.IOHDAFamily     266.5
com.apple.iokit.IONDRVSupport     2.4.1
com.apple.iokit.IOGraphicsFamily     2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport     4.3.0f10
com.apple.iokit.IOBluetoothFamily     4.3.0f10
com.apple.iokit.IOUSBUserClient     705.4.0
com.apple.driver.IOPlatformPluginLegacy     1.0.0
com.apple.driver.IOPlatformPluginFamily     5.8.0d49
com.apple.driver.AppleSMC     3.1.9
com.apple.driver.AppleUSBHIDKeyboard     175.5
com.apple.driver.AppleHIDKeyboard     175.5
com.apple.driver.AppleUSBMultitouch     245.2
com.apple.iokit.IOUSBMassStorageClass     3.7.0
com.apple.iokit.IOUSBHIDDriver     705.4.0
com.apple.driver.AppleUSBMergeNub     705.4.0
com.apple.driver.AppleUSBComposite     705.4.9
com.apple.driver.CoreStorage     471
com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.7.0
com.apple.iokit.IOBDStorageFamily     1.7
com.apple.iokit.IODVDStorageFamily     1.7.1
com.apple.iokit.IOCDStorageFamily     1.7.1
com.apple.driver.AppleThunderboltDPInAdapter     4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily     4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter     2.0.2
com.apple.iokit.IOSCSIBlockCommandsDevice     3.7.0
com.apple.driver.AppleThunderboltNHI     3.1.7
com.apple.iokit.IOThunderboltFamily     4.2.1
com.apple.iokit.IOAHCISerialATAPI     2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily     3.7.0
com.apple.iokit.IO80211Family     700.52
com.apple.iokit.IOEthernetAVBController     1.0.3b3
com.apple.driver.mDNSOffloadUserClient     1.0.1b8
com.apple.iokit.IONetworkingFamily     3.2
com.apple.iokit.IOFireWireFamily     4.5.6
com.apple.iokit.IOAHCIFamily     2.7.0
com.apple.iokit.IOUSBFamily     705.4.14
com.apple.driver.AppleEFINVRAM     2.0
com.apple.driver.AppleEFIRuntime     2.0
com.apple.iokit.IOHIDFamily     2.0.0
com.apple.iokit.IOSMBusFamily     1.1
com.apple.security.sandbox     300.0
com.apple.kext.AppleMatch     1.0.0d1
com.apple.driver.AppleKeyStore     2
com.apple.driver.AppleMobileFileIntegrity     1.0.5
com.apple.driver.AppleCredentialManager     1.0
com.apple.driver.DiskImages     389.1
com.apple.iokit.IOStorageFamily     2.0
com.apple.iokit.IOReportFamily     31
com.apple.driver.AppleFDEKeyStore     28.30
com.apple.driver.AppleACPIPlatform     3.1
com.apple.iokit.IOPCIFamily     2.9
com.apple.iokit.IOACPIFamily     1.4
com.apple.kec.corecrypto     1.0
com.apple.kec.Libm     1
com.apple.kec.pthread     1
Unable to gather system configuration information.Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: USB2.0 Hub
USB Device: iPod
USB Device: USB2.0 Hub
USB Device: Keyboard Hub
USB Device: Apple Keyboard
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: LPHD-UP3
USB Device: IR Receiver
FireWire Device: ProFire 610, M-Audio, Up to 400 Mb/sec
Thanks !!
Andres
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

I believe this is the same problem I have been having since the beta.  I submitted reports, but I was never able to find a solution.  I have been able to replicate the issue.  Mine seems to crash/restart when I am running safari with a lot of tabs.  I have seen some suggestions that it is a crash related to the way Safari is processing graphics. 
I would love to find a resolution as well.

Similar Messages

  • Why won't my 2011 MacBook Pro restart after Yosemite installation?

    Why won't my 2011 MacBook Pro restart after Yosemite installation?

    What symptoms are you seeing?
    At what point does it get stuck? 
    Is it failing to Restart, or failing once it restart?
    what exactly is on the screen, if anything?
    Do you get the chime? the gray Apple? The spinner? black screen? gray screen? prohibitory sign?

  • Core Duo random restarts after ram install

    Hi,
    I am aware of kernel panics caused by bad ram, but not random restarts. Well, here is the list of problems since installing 2GB ram:
    1) 1 kernel panic about 10 minutes after installing said ram
    2) 3 random restarts about 24hrs apart while working.
    Is this indicative of bad ram, or do I have a different problem?
    Other than that, I love this mini.
    Thanks,
    Berndt

    Hi Berndt,
    Just wondering if that Mushkin brand memory is still working fine in your Intel MacMini Duo. I've checked out Mushkin's website and they do not list the Intel Mini as a compatable machine but every other Intel Mac is listed. Maybe they just missed it, I don't know. That's why I'm curious as to whether you're having continued success or not.
    Thx.
    Steve

  • Constantly restarting after yosemite install

    I just installed Yosemite, but after the inital install my mac kept restarting. I thought that was part of the installation but it kept doing it over and over for hours. Now it's stuck at the gray screen. What's going on? It's worth mentioning my laptop was dealing with freezing issues before this. I though updating would help solve the problem. I'm updating from 10.6.8.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My MacBook Pro's internal SuperDrive has stopped recognizing CDs/DVDs after Yosemite install

    After upgrading to Yosemite, my MacBook Pro's (early 2011) internal SuperDrive has stopped recognizing CDs/DVDs after Yosemite install. It takes them in and will eject them with the keyboard button, but they will not mount. Disk Utility shows the SuperDrive and shows the inserted media, but will not mount the disk. That button is grayed out. Please help! I still have training libraries and music I access on such media. Thx!

    UPDATE: I discovered some forum posts about a similar issue with Mavericks that recommended re-installing the system to fix the problem. I realized that I rarely restart my computer unless there's an update that requires it, and decided before undertaking a full re-install of Yosemite to simply restart my computer again. THIS WORKED! The SuperDrive is now mounting CDs and DVDs. Not sure what the issue was, but if anyone else has this issue I hope this will save you hours of frustration.

  • Keeps crashing after Yosemite install - Need thoughts on what to do...

    My 2013 Macbook Air keeps crashing after Yosemite install, time between crashes are more random than consistent and it can be anytginh from one hour to 6 hours between crashes. Enclosed the report below with the hope that someone has some tips on what to do here.... I've formatted the computer, reinstalled the OS and checked the drive for errors and I've found nothing so far.
    Would be very grateful for any thoughts/tips on what to do here...
    Anonymous UUID:       BEEFE0EB-6E39-4774-2F21-C8DB361123F7
    Tue Oct 21 23:43:49 2014
    *** Panic Report ***
    panic(cpu 0 caller 0xffffff8007d7a590): "a freed zone element has been modified in zone kalloc.1024: expected 0xdb989f771eb1bbd8 but found 0x60002, bits changed 0xdb989f771eb7bbda, at offset 0 of 1024 in element 0xffffff8018915c00, cookies 0x3f0011f6db804ed8 0x5352198c01c0537"@/SourceCache/xnu/xnu-2782.1.97/osfmk/kern/zalloc.c:496
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81102c32d0 : 0xffffff8007d3a811
    0xffffff81102c3350 : 0xffffff8007d7a590
    0xffffff81102c33c0 : 0xffffff8007d79c17
    0xffffff81102c3400 : 0xffffff8007d78de7
    0xffffff81102c3530 : 0xffffff800813160e
    0xffffff81102c36d0 : 0xffffff800812aab9
    0xffffff81102c3760 : 0xffffff8008140ccf
    0xffffff81102c3930 : 0xffffff8007f3f2f8
    0xffffff81102c3a10 : 0xffffff8007f3ea95
    0xffffff81102c3b40 : 0xffffff8007f52005
    0xffffff81102c3b90 : 0xffffff8007f62505
    0xffffff81102c3d90 : 0xffffff8007f56d87
    0xffffff81102c3f50 : 0xffffff800824dcb2
    0xffffff81102c3fb0 : 0xffffff8007e3ac46
    BSD process name corresponding to current thread: PhotoStreamAgent
    Mac OS version:
    14A389
    Kernel version:
    Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
    Kernel slide:     0x0000000007a00000
    Kernel text base: 0xffffff8007c00000
    __HIB  text base: 0xffffff8007b00000
    System model name: MacBookAir6,1 (Mac-35C1E88140C3E6CF)
    System uptime in nanoseconds: 16215962667183
    last loaded kext at 9812882932706: com.apple.filesystems.smbfs 3.0.0 (addr 0xffffff7f8a0e1000, size 389120)
    last unloaded kext at 1736098368348: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f895e6000, size 16384)
    loaded kexts:
    com.apple.filesystems.smbfs 3.0.0
    com.apple.driver.AppleBluetoothMultitouch 85.3
    com.apple.iokit.SCSITaskUserClient 3.7.0
    com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
    com.apple.driver.AudioAUUC 1.70
    com.apple.iokit.IOUserEthernet 1.0.1
    com.apple.driver.AppleUpstreamUserClient 3.6.1
    com.apple.driver.AGPM 100.14.37
    com.apple.driver.ApplePlatformEnabler 2.1.0d1
    com.apple.driver.X86PlatformShim 1.0.0
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleIntelHD5000Graphics 10.0.0
    com.apple.driver.AppleHDA 266.5
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleOSXWatchdog 1
    com.apple.driver.AppleLPC 1.7.3
    com.apple.driver.AppleThunderboltIP 2.0.2
    com.apple.driver.AppleBacklight 170.4.12
    com.apple.driver.AppleUSBEthernet 2.4.7
    com.apple.driver.AppleHV 1
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AirPort.Brcm4360 900.19.8
    com.apple.driver.AppleCameraInterface 5.23.0
    com.apple.driver.AppleMCCSControl 1.2.10
    com.apple.driver.AppleIntelFramebufferAzul 10.0.0
    com.apple.filesystems.autofs 3.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.AppleUSBHub 705.4.1
    com.apple.driver.AppleTopCaseHIDEventDriver 46.2
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.5
    com.apple.driver.AppleAHCIPort 3.0.7
    com.apple.driver.AppleUSBXHCI 705.4.14
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleACPIButtons 3.1
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 3.1
    com.apple.driver.AppleAPIC 1.7
    com.apple.nke.applicationfirewall 161
    com.apple.security.quarantine 3
    com.apple.security.TMSafetyNet 8
    com.apple.driver.IOBluetoothHIDDriver 4.3.0f10
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
    com.apple.iokit.IOUSBMassStorageClass 3.7.0
    com.apple.iokit.IOSurface 97
    com.apple.driver.DspFuncLib 266.5
    com.apple.kext.OSvKernDSPLib 1.15
    com.apple.iokit.IOAudioFamily 200.6
    com.apple.vecLib.kext 1.2.0
    com.apple.driver.AppleBacklightExpert 1.1.0
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.driver.AppleHDAController 266.5
    com.apple.iokit.IOHDAFamily 266.5
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
    com.apple.iokit.IOBluetoothFamily 4.3.0f10
    com.apple.iokit.IO80211Family 700.52
    com.apple.driver.mDNSOffloadUserClient 1.0.1b8
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOSerialFamily 11
    com.apple.driver.X86PlatformPlugin 1.0.0
    com.apple.driver.AppleSMC 3.1.9
    com.apple.driver.IOPlatformPluginFamily 5.8.0d49
    com.apple.driver.AppleSMBusController 1.0.13d1
    com.apple.AppleGraphicsDeviceControl 3.7.21
    com.apple.iokit.IOAcceleratorFamily2 156.4
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOUSBUserClient 705.4.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
    com.apple.driver.AppleUSBMergeNub 705.4.0
    com.apple.driver.AppleUSBComposite 705.4.9
    com.apple.driver.CoreStorage 471
    com.apple.driver.AppleHIDKeyboard 175.5
    com.apple.driver.AppleHSSPIHIDDriver 26.2
    com.apple.driver.AppleMultitouchDriver 260.30
    com.apple.iokit.IOAHCIFamily 2.7.0
    com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
    com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
    com.apple.driver.AppleThunderboltNHI 3.1.7
    com.apple.iokit.IOThunderboltFamily 4.2.1
    com.apple.driver.AppleHSSPISupport 26.2
    com.apple.driver.AppleIntelLpssSpiController 2.0.45
    com.apple.driver.AppleIntelLpssDmac 2.0.45
    com.apple.driver.AppleIntelLpssGspi 2.0.45
    com.apple.iokit.IOUSBFamily 705.4.14
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 300.0
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.AppleMobileFileIntegrity 1.0.5
    com.apple.driver.AppleCredentialManager 1.0
    com.apple.driver.DiskImages 389.1
    com.apple.iokit.IOStorageFamily 2.0
    com.apple.iokit.IOReportFamily 31
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 3.1
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.Libm 1
    com.apple.kec.corecrypto 1.0
    com.apple.kec.pthread 1
    Model: MacBookAir6,1, BootROM MBA61.0099.B16, 2 processors, Intel Core i7, 1.7 GHz, 8 GB, SMC 2.12f143
    Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (7.15.124.12.8)
    Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en0
    Serial ATA Device: APPLE SSD SM0512F, 500,28 GB
    USB Device: My Passport 0824
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: MacBook Air, Apple Inc., 23.6

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Very long shutdown time after Yosemite install

    After installing Yosemite my Macbookpro has shutdown times of over more than 5 minutes. This is what i got from Etrecheck.
    Problem description:
    very long shutdown time after yosemite install
    EtreCheck version: 2.1.8 (121)
    Report generated 19 Feb 2015 01:19:39 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,2
        1 2 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 868
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
        AMD Radeon HD 6490M - VRAM: 256 MB
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: one day 7:40:33
    Disk Information: ℹ️
        Hitachi HTS545050B9A302 disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (90.86 GB free)
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        LaCie LaCie Device 500,11 GB
            EFI (disk2s1) <not mounted> : 210 MB
            MINI DAVID HDD (disk2s2) /Volumes/MINI DAVID HDD : 499.76 GB (62.48 GB free)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Karabiner.app
        [not loaded]    org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) [Click for support]
            /Library/Parallels/Parallels Service.app
        [not loaded]    com.parallels.kext.prl_hid_hook (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_hypervisor (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_netbridge (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_usb_connect (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_vnic (7.0 15106.786747) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.Avid.driver.AvidDX (4.7.1) [Click for support]
        [loaded]    com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
        [not loaded]    com.SafeNet.driver.Sentinel (7.3.0) [Click for support]
        [not loaded]    com.avid.driver.Avid_SCSI (1.2.0) [Click for support]
        [not loaded]    com.avid.driver.Avid_SCSI_RBC (1.2.0) [Click for support]
        [loaded]    com.cisco.kext.acsock (1.1.0 - SDK 10.2) [Click for support]
        [not loaded]    com.digidesign.fwfamily.driver (8.0.4f1) [Click for support]
        [not loaded]    com.digidesign.mbox2.boot.driver (8.0.4f1) [Click for support]
        [not loaded]    com.digidesign.mbox2.driver (8.0.4f1) [Click for support]
        [not loaded]    com.freecom.driver.BoulderScsi (1.0.0d1) [Click for support]
        [not loaded]    com.metakine.handsoff.driver (2.0.8 - SDK 10.6) [Click for support]
        [not loaded]    com.nvidia.CUDA (1.1.0) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport2 (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.7.2b8) [Click for support]
        [loaded]    com.rogueamoeba.HermesAudio (3.0.1) [Click for support]
        [not loaded]    com.sony.filesystems.pdudf (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.sony.filesystems.pdudfr (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.sony.scsi.PDW-U1 (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.wacom.kext.pentablet (5.3.5 - SDK 10.9) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.7.2b8) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.7.2b8) [Click for support]
    Startup Items: ℹ️
        ciscod: Path: /System/Library/StartupItems/ciscod
        CUDA: Path: /System/Library/StartupItems/CUDA
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        PACESupport: Path: /Library/StartupItems/PACESupport
        ProTecVb: Path: /Library/StartupItems/ProTecVb
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Daemons: ℹ️
        [unknown]    c om.apple.coreservices.appleevents.plist [Click for support]
        [unknown]    c om.apple.diskarbitrationd.plist [Click for support]
        [unknown]    c om.apple.mDNSResponder.plist [Click for support]
        [unknown]    co m.apple.securityd.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [loaded]    com.cisco.anyconnect.gui.plist [Click for support]
        [running]    com.epson.epw.agent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.metakine.handsoff.agent.plist [Click for support]
        [loaded]    com.nvidia.CUDASoftwareUpdate.plist [Click for support]
        [failed]    com.parallels.desktop.launch.plist [Click for support]
        [loaded]    com.parallels.DesktopControlAgent.plist [Click for support]
        [running]    com.parallels.vm.prl_pcproxy.plist [Click for support]
        [running]    com.wacom.pentablet.plist [Click for support]
        [running]    net.culater.SIMBL.Agent.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [failed]    com.autodesk.backburner_manager.plist [Click for support]
        [running]    com.autodesk.backburner_server.plist [Click for support]
        [failed]    com.autodesk.backburner_start.plist [Click for support]
        [running]    com.cisco.anyconnect.vpnagentd.plist [Click for support]
        [running]    com.digidesign.fwfamily.helper.plist [Click for support]
        [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [running]    com.metakine.handsoff.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [running]    com.parallels.desktop.launchdaemon.plist [Click for support]
        [loaded]    com.rogueamoeba.hermes.plist [Click for support]
        [loaded]    com.rogueamoeba.instanton-agent.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    User Login Items: ℹ️
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 - SDK 10.4 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        CUDA Preferences  [Click for support]
        DigidesignMbox2  [Click for support]
        Digidesign Mbox 2 Pro  [Click for support]
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        MacFUSE  [Click for support]
        Perian  [Click for support]
        PenTablet  [Click for support]
        XDCAM Drive Monitor  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 408.02 GB
        Destinations:
            Time Capsule [Local]
            Total size: 799.52 GB
            Total number of backups: 18
            Oldest backup: 2014-11-12 02:44:18 +0000
            Last backup: 2015-02-17 14:14:45 +0000
            Size of backup disk: Too small
                Backup size 799.52 GB < (Disk used 408.02 GB X 3)
    Top Processes by CPU: ℹ️
            20%    mds
             5%    WindowServer
             2%    Google Chrome
             1%    launchd
             1%    prl_disp_service
    Top Processes by Memory: ℹ️
        515 MB    Final Cut Pro
        378 MB    softwareupdated
        309 MB    Google Chrome
        215 MB    Google Chrome Helper
        206 MB    mds_stores
    Virtual Memory Information: ℹ️
        220 MB    Free RAM
        3.56 GB    Active RAM
        3.34 GB    Inactive RAM
        1.45 GB    Wired RAM
        7.56 GB    Page-ins
        4 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 18, 2015, 04:35:18 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-163518_[redacted].crash
        Feb 18, 2015, 04:29:01 PM    /Library/Logs/DiagnosticReports/backburnerManager_2015-02-18-162901_[redacted]. crash
        Feb 18, 2015, 04:11:30 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-161130_[redacted].crash
        Feb 18, 2015, 04:04:44 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-160444_[redacted].crash
        Feb 18, 2015, 01:49:37 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-134937_[redacted].crash
        Feb 17, 2015, 05:36:32 PM    Self test - passed

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Shut down from safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Messages stuck in updating after Yosemite install

    Messages stuck in updating after Yosemite install.  Tried re-install of Yosemite and quit messages, still unable to access.

    Hi,
    Go to the ~/Library/Attachments folder.  (well it should be a folder).
    If it is not a Folder then rename it and create a New folder with the same name.
    restart Messages.
    Or if you have a Time Machine backup replace the Non folder item with an Original from just before the update.
    9:22 pm      Saturday; January 17, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • My display is non hdcp compliant after Yosemite install

    My display is non hdcp compliant after Yosemite install, fix this?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Unable to bootup after Yosemite install. have to keep shutting down from rear button. it does come on after a few times but then hangs at user login again. If you get in it is great. Seems faster than Mavericks but there is some sort of issue, bouts

    unable to bootup after Yosemite install. have to keep shutting down from rear button. it does come on after a few times but then hangs at user login again. If you get in it is great. Seems faster than Mavericks but there is some sort of issue, bootup /login.

    Knock on wood, this seems to have been my problem as well.  I stumbled on this thread after dealing with this ridiculously-long boot times for the past several weeks.
    I just reinstalled McAfee Antivirus and my Macbook Air booted up in less than 1 minute.  No more hanging on the boot-up progress bar.  No more hanging after I click on my user's avatar on the log-in screen.  Bootup would often take 5+ minutes and sometimes never complete.
    This has been SUPREMELY frustrating.
    THANK YOU SO MUCH FOR POSTING YOUR RESPONSE!!!

  • Monitors flickering badly after Yosemite Install

    Monitor flickering badly after Yosemite installed
    I will be awaiting upDated drivers in a release soon.
    I notice is very badly when I connect my iphone to ITunes screen
    goes crazy flicker. . . . Anyone else having this issue ?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time -been

    My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time.

    I tried this, but no luck. I went to Previous System>Users. There is nothing inside the "Users" folder, so I hit a dead end.
    I can find my new e-mails -- those that came in since I re-installed the system -- in my NEW system (which I did to see if I was correctly understanding the advice), by going to Users>Home>Library>Mail>POP account name>Inbox.
    Let me add a new question: I am running PhotoShop C3. It opens OK, and I can use it, but when it opens I get this message: "One or more files for Adobe Application Support folder are missing. Please re-run the PhotoShop installer."
    I don't like re-installing working programs if I can avoid it, because it always seems to lead to other issues. Any idea what files are missing, and where it/they might be in the Previous System folder?
    thanks
    Mike

  • Plugin sandbox errors after yosemite install

    After Yosemite install I see MANY errors in my system.log like this:
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/AirDrop .appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Faceboo kProfilePic.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/FlickrI mage.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/LinkedI n.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/ShareMa il.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/ShareMe ssages.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SinaWei bo.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SystemA ddToiPhoto.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SystemS etAccountPicture.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SystemS etDesktopImage.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Tudou.a ppex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Twitter ProfilePic.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Youku.a ppex: plug-ins must be sandboxed
    It goes for many software, like ShareKit.framework, SceneKit.framework, NotificationCenter.framework, Preview.app, Calendar.app, Reminders.app etc. - all of them are Apple software. I get it like every 1 minute in log.
    Google didn't help. What is it, what does it means and how to fix?..

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) -exec ls -Odel {} \; | wc -l
    Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "85." Please post it in a reply.

  • Can't sync files on Cloud Drive between Macbook and iPad after Yosemite and IOS 8.02

    can't sync files on Cloud Drive between Macbook and iPad after Yosemite and IOS 8.02
    Pages, Numbers and more won't sync.

    Er OK efter opdatering til IOS 8.1
    Til gengæld er Photo funktionen (synkronisering) blevet dårligere (for dårligt)

  • Bootcamp Wont Load After Yosemite Install

    Loner T,
    My bootcamp does not load after Yosemite install.
    Thanks

    This is the first part of the recovery procedure. In your case, you have two OS X versions, so standard layout is not usable.
    Please install GPT Fdisk (aka gdisk) (http://sourceforge.net/projects/gptfdisk/) if you have not done so yet.
    You need to use the following steps. If you see any error messages during the following steps, please stop and post back here with the error message. The following steps have values from your Testdisk output (and you can verify) in Steps 7 and 8.
    Rebuild GPT5 using start/end offsets
    Sudo gdisk /dev/rdisk0
    P  (print the full list of parts)
    D  (delete)
    5  (part 5)
    N  (new part)
    5   (part 5)
    841717760 - Start offset in bytes  (start point for Bootcamp part)
    +135055353 (Size offset as opposed to End offset)
    0700     (Windows part type)
    P           (print list of all parts just to see what changes will be made)
    W         (Write the new GPT)
    Y           (Yes! really write the new GPT)
      This will delete and re-write the GPT partition info for /dev/disk0s5.
    Reboot. Test that you can see the Bootcamp volume in Finder and see files in the Bootcamp volume.

Maybe you are looking for

  • PAYMENT PROCESS TO SUPPLIERS WITH SAP VENDOR INVOICE MANAGEMENT BY OPENTEXT

    Hello gurus i am trying to  send and write data from sap process integration to SAP vendor invoice management by OPENTEXT , the overall steps im trying are: FUNCTION: ARCHIVOBJECT_CREATE_FILE (ARC_DOC_ID) ARCHIVE_CONNECTION INSERT  (XML bound ARCDOC_

  • Link button in matrix

    Hi all, I am using link button in matrix. I bound link button with existring SAP transcation like employees and UDO too. but link is not working in both cases. can anybody help me out.... Manish

  • Windows 7 64 Bit Frequent BSOD

    I've been running Windows 7 for awhile now with no problems, but as of two days ago I've started getting frequent BSODs.  It doesn't seem to be giving me the same error every time though, I've gotten anything from System_service_exception to Memory_m

  • IPad mini stuck in restore for 27 hours

    I got my iPad Mini 2 yesterday afternoon, and began to restore from my iPhone. It successfully downloaded my apps and music but has neglected to do any photos, contacts etc. It has been connected to wifi continually since yesterday afternoon but it i

  • Cant install flashplayer after uninstal

    had problem with flash 12 version , i used flash uninstaller , now i cant reinstall , stops at 7% , then i retry and script error 5 ... help ?