Macbook really slow at startup

for the first 5 mins, my book is really slow.
itunes music has gaps in the songs, and firefox loads really slowly.
is there a quick way to speed up my macbook?

How long have you had your MB? I found that upgrading the ram (and admittingly, adding a much faster HDD) really speeded up the boot time of my MB. If you have had your MB for a long time now, you may need to run some of the system maint. stuff.
See this thread:
http://discussions.apple.com/thread.jspa?threadID=722791&tstart=0
Oh also if you have a virus scanner or something along those lines they will typically slow down a computer.
Another thing to try, go into your utilities folder and launch the system monitor. After you see it in the dock, go into it's preferences and tell it to display the CPU in the dock. Then chick and hold until the menu pops up on the icon in the dock and tell it to run on startup. Reboot. When the system monitor appears, look at your CPU cores and if one or both of them are pegged off at 100 percent, go into the process tab and see what the app is that is slowing down your machine. After that you may want to take steps to uninstall it or reconfigure it so it does not do that.
Hope this helps.
- Kiteless

Similar Messages

  • Why is my MacBook really slow since uploading Yosemite

    Why is my MacBook really slow since installing Yosemite?

    If you have less than 4 GB of memory (not 8 GB) as shown in the About This Mac window, Yosemite won't perform well. Otherwise, see below.
    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Yosemite has made my macbook really slow!!

    So i recently updated to yosemite and it has made my 2011 macbook pro really slow. I ran EtreCheck and here are my results. Someone please help!
    EtreCheck version: 2.0.6 (91)
    Report generated October 21, 2014 at 7:48:58 PM EDT
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 22:0:19
    Disk Information: ℹ️
      ST9320325ASG disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 318.84 GB (125.60 GB free)
      Core Storage: disk0s2 319.21 GB Online
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Roxio
      [not loaded] com.roxio.TDIXController (2.0) Support
      /System/Library/Extensions
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.cmfsyncagent.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.EscrowSecurityAlert.plist
      [failed] com.apple.lookupd.plist
      [failed] com.apple.printtool.agent.plist
      [failed] com.apple.sbd.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
      [failed] com.apple.security.cloudkeychainproxy.plist
      [failed] com.apple.spindump_agent.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.AssetCacheLocatorService.plist
      [failed] com.apple.awdd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-daily.plist
      [failed] com.apple.periodic-weekly.plist
      [failed] com.apple.softwareupdate_download_service.plist
      [failed] com.apple.systemstats.analysis.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.CS5ServiceManager.plist Support
      [loaded] com.google.keystone.agent.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
    User Login Items: ℹ️
      iTunesHelper UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.0.0 Support
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Growl  Support
    Top Processes by CPU: ℹ️
          10% WindowServer
          1% sysmond
          0% AppleSpell
          0% Activity Monitor
          0% fontd
    Top Processes by Memory: ℹ️
      258 MB Safari
      112 MB Twitter
      64 MB Finder
      56 MB mds_stores
      56 MB WindowServer
    Virtual Memory Information: ℹ️
      447 MB Free RAM
      1.54 GB Active RAM
      699 MB Inactive RAM
      1.12 GB Wired RAM
      5.00 GB Page-ins
      56 MB Page-outs

    All the com.apple stuff in red can't be good.
    First: you need a backup. Then:
    I would boot into the recovery partition (restart and hold down ⌘ R until you see the apple logo) and use disk utility to repair your HD. Repair permissions while you are there too.
    I'd also get rid of the google keystone agent, which is a frequent flyer here for slowing macs down.
    Then restart and see how things are.
    If that doesn't fix it then I'd reinstall Yosemite over the current installation.
    If that doesn't fix it then you probably need to start over with a clean install (i.e., backup your documents, erase your HD, and reinstall everything from scratch).

  • Macbook really slow after waking from sleep

    After waking up after sleeping my Macbook everything is really slow. It takes over 10 to 20 seconds to fully wake up. Once it does switching between applications etc. is really slow. Is this a problem that would be fixed by adding more RAM? I am not using any applications that would require Rosetta. I also experience this sluggishness other times too. There really is not any difference in using my 5 year old powerbook with Tiger installed and using my Macbook. (The Powerbook did not have problems waking up though.) Why is this?

    That behaviour is expected. When the machine wakes from sleep, it has a lot of things to do; reconnecting network connections, checking battery life, copying stuff from memory to and from the swap file to get everything back 'up and running'. More memory will definitely help in this case.

  • HT1338 macbook really slow.

    my macbook is really slow. I tried mackeeper once and it seems to have got worse since then.

    If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
    If iCloud is enabled, disable it.
    Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Step 2
    Launch the Console application in the same way as above, and select “system.log” from the file list. Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.
    Step 3
    Same as step 2, but select "kernel.log" from the file list.

  • My Macbook Pro slow on startup. How can I fix this?

    Hello,
    My macbook pro is slow on start up. Today I had to shut the computer down using the power button TWO TIMES IN A ROW. On the third time, the computer executed the start up correctly. What could be the cause of this? How do I fix it?
    saxman81

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the times of the log messages referring to boot times. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or freeze, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search that archived log, and if necessary the older ones below it, for the same information.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Do the same with kernel.log.
    Step 3
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

  • My retina macbook is slow to startup when my external drive is attached

    Ive had my macbook retina for a couple of days now and generally the boot time is amazingly fast. But it seems that now Ive connected my usb devices to it (including my external drive) there is a long pause on the white screen at the beginning of startup .  If I unplug everything it goes back to being really fast again!
    is this normal?
    thanks for any help!
    Nick

    No problem. Do you have a particular reason to shut down your system though? If you use it on a daily basis then I'd suggest just putting it to sleep rather than a full shutdown.
    This doesn't harm your machine. Only shut it down when there's a real extended period of no use. In sleep mode you can benefit from the Power Nap feature of your retina as well:
    http://support.apple.com/kb/HT5394

  • Macbook really slow - what can i do?

    recently, i've noticed that my macbook has been getting slower and slower.
    for example, if i open itunes straight away, there are jumps in the songs.
    when i open firefox, as soon as i right click, i have to wait about 10 seconds, then get the colourful mouse wheel, then get the right click menu.
    i have tried to cut down as many processes as i can, but it was never this bad when i first bought it.
    i regularly clear caches, and run daily, weekly, and monthly scripts with onyx and cleanapp.
    if it helps, i'm running a macbook coreduo 2.0ghz, 512mb ram, 60GB HD.
    i don't want to take it to a genius bar, because that is 2 hours drive away.
    as i write this, i have itunes and textedit open (i'm at my brother's, and he doesn't have internet) and the fans are going. i have no idea why, because my macbook is quite cool and i don't have any big applications running.
    below is a link to a picture of my activity monitor
    http://img294.imageshack.us/img294/5311/picture2yh4.png
    any ideas what to do to speed it up?
    Macbook 2.0Ghz White - 512MB RAM - 60GB HDD   Mac OS X (10.4.8)   Boot Camp 1.1 - Windows XP Pro Corporate

    Just fyi - I found this program that gives you a neat overview of what is taking up space on your hard drive - I for example, had iDVD installed and its 'themes' take up 1.5 Gig of data! I never use it so of course I trashed it ...the nice thing about having the Install CD is that if you need to bring back an Apple application it's pretty simple to do.
    Space is what you make of it ...I've got a 60Gig drive with 1500+ songs, almost 2000 pictures, over 3Gig of Camera movies, over 30 extra applications and I have Windows XP set aside on a 10Gig partition with Reason 3.0 and Photoshop 7 ...and I still have over 20 Gig free.
    Macbook 1.8-)   Mac OS X (10.4.8)   Week 38 base model w/1G Ram

  • MacBook REALLY slow after Aperture install

    After I installed Aperture, my system slowed WAAAAY down. I'm talking as long as a minute to bring up a menu. I made sure that all import was finished, all previews made, and in fact at times the system works as before. But then, all of a sudden, something bogs the whole system down, on any software.
    How can I tell what is running in the background so I can remove it? Any other suggestions? I'm a Windows convert, so still have a lot to learn...
    John

    You can open up the Activity Monitor program from the /Applications/Utilities/ folder. It will give you a display of all running processes.
    How much hard drive space remains after your install and import? You can choose "Get Info" from the File menu if you highlight the icon of your hard drive. The window that opens will tell you the capacity, available and used space.
    -Doug

  • Firefox 21 slow on startup, checked articles, dis all addins still slow ie is lightning fast on startup!

    Firefox 21 is really slow on startup, I have disabled all addons, checked memory, optimized win 7, ran system mechanic but it is still slow, changed home page . IE 8.9.10 is lightning fast on startup.

    A tad faster but still slow compared to IE 8,9,10 where it starts instantly.

  • My MacBook Pro is REALLY slow after a week of running Yosemite perfectly

    I have a MacBook Pro (about 3 years old) and I have never had any problems with it.
    When Yosemite was released I updated and my MacBook ran perfectly and faster then before for a little over a week. Then all of a sudden it became SO incredibly slow. There is a waiting time on everything that has to do with a computer; from when I make a keystroke to the letter actually pops up on the screen, when I click an icon to launch a program, and so - I think you get the picture. Always the **** rainbow circle.
    I have searched so many forums online and tried a lot of different things such as re-indexing spotlight, the "Hold down the left shift, option and control keys together with the power button-trick", various "sudo" commands in terminal, cleaning out junk (not in a very structured matter, just old files I didn't need anymore). To be honest I have no idea what I am doing, I just try whatever the smart people in the forums suggest.
    I am lucky to have very recently been gifted a brand new MacBook Pro retina bla bla bla, which I am writing this from now, so it's not really an emergency situation. It's just really annoying to have a MacBook I can't use and that also has ALL of my previous work and programs on it.
    SO here's another question:  I would just really like to back my old MacBook up using Time Machine but as the MacBook is REALLY SLOW so is the back up process. At first it was stuck on "preparing" but I figured it was because my 500GB TM external harddrive was too small, so I bought a new 1TB external harddrive. Right now my old MacBooks is performing a back up  and has passed the "preparing" stage, but after around 20 hours it has no time estimation and has only backed up "1.28 GB of 98.29 GB" and I feel like this is WAY too ineffective and really shouldn't take that long. I cant wait 100 days for this thing to back up ?!?!?!?!
    So basically I have a seriously slow MacBook Pro, so slow it actually cannot be used and so slow it cannot back up.
    I tried using Migrant Assistant via bluetooth to my new MacBook, but as you probably have guessed - over 24 hours later it was still stuck, and I also had my doubts because I thought if the slow, demonic MacBook would simply just infect and possess my new, pure, virgin MacBook.
    So this was probably confusing.
    To sum it up:
    - I am a girl and I am a technical neanderthal <3
    - I have 2 MacBooks; one slow, one brand new - both running up-to-date Yosemite and other updates are on fleek
    - It would be ideal for me to use Migrant Assistant to set my new Macbook to what I'm used to - can this be done without screwing up my new MacBook?
    - I can't seem to get TM working on my old one - can I bring my iPhoto and iTunes library to safety manually (like my other folders)?
    - I have not been a good girl, and that means my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
    I really don't want to just wipe it completely, as I don't want to lose the programs I have installed - it's just such a hassle to reinstall and codes and what not.
    Extra info if it's necessary to anyone:
    I have monitored the CPU% for some time in the Activity Monitor and when literally no programs but the Activity Monitor is open and the CPU% of free CPU is 98% the computer is STILL ----------- SO --------------- SLOooooooooow..... ( just to clarify I have checked if there's random program that takes up all the CPU; there's not). Also I have no clue what CPU is so, if I have used it in a weird way in these sentences, please forgive me.
    Product:
    MacBook Pro (13", primo 2011)
    OS X Yosemite version 10.10.1
    Processor: 2.3 GHz Intel Core i5
    Memory: 4GB 1333 MHz DDR3
    Startup Disk: Macintosh HD
    Graphics: Intel HD Graphics 3000 384 MB
    Memory:
    215.31 GB free out of 318.84 GB
    My System Memory looks like this at CPU% = 1.15 right now :
    "real memory" : 38.9 MB
    "virtual memory" : 2.48 GB
    "shared memory" : 20.4 MB
    "private memory" : 10.6 MB
    I have no idea what any of this means or if it has any significance, but it said that I should include it.
    Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
    I really really really hope that someone can (and want to) help me. It's not that I don't want to take it to any Mac-certified store, it's just I live in Denmark and the people who work at these stores always just say that they can "wipe it clear" so it's "as good as new" for a 100 bucks. We don't have Genius Bars and stuff..... I would really be so happy if ANYONE have just ANY solution to what would be a good idea to do now.
    THANK YOU SO MUCH in advance
    Anne Katrine

    Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
    That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
    ... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
    If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
    Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

  • Problem description: My MacBook Pro is running really slow. Applications won't open or take up to 10 min.  EtreCheck version: 2.1.5 (108) Report generated December 27, 2014 at 9:15:58 PM CST  Click the [Support] links for help with non-Apple products

    Problem description:
    My MacBook Pro is running really slow. Applications won’t open or take up to 10 min.
    EtreCheck version: 2.1.5 (108)
    Report generated December 27, 2014 at 9:15:58 PM CST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: one day 6:55:8
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HD (disk1) /  [Startup]: 498.88 GB (5.04 GB free) (Low!)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
    Problem System Launch Agents: ℹ️
      [killed] com.apple.CallHistoryPluginHelper.plist
      [killed] com.apple.coreservices.appleid.authentication.plist
      [killed] com.apple.icloud.fmfd.plist
      [killed] com.apple.telephonyutilities.callservicesd.plist
      4 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
      [killed] com.apple.ctkd.plist
      [killed] com.apple.icloud.findmydeviced.plist
      [killed] com.apple.ifdreader.plist
      [killed] com.apple.nehelper.plist
      [killed] com.apple.wdhelper.plist
      [running] com.seagate.TBDecorator.plist [Support]
      5 processes killed due to memory pressure
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
      [running] com.carbonite.launchd.carbonitestatus.plist [Support]
      [loaded] com.coupons.coupond.plist [Support]
      [loaded] com.hp.help.tocgenerator.plist [Support]
      [loaded] com.trendmicro.itis.dca.plist [Support]
      [running] com.trendmicro.itis.uimgmt.agent.plist [Support]
    Launch Daemons: ℹ️
      [failed] com.adobe.fpsaud.plist [Support]
      [running] com.carbonite.launchd.carbonitedaemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [running] com.trendmicro.icore.av.plist [Support]
      [running] com.trendmicro.icore.main.plist [Support]
      [running] com.trendmicro.icore.wp.plist [Support]
      [running] com.trendmicro.itis.plugin.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
      [invalid?] com.jdibackup.JustCloud.backupstart.plist [Support]
      [loaded] com.trendmicro.itis.uninstaller.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      bomgar-scc-20130819-104735 UNKNOWN (missing value)
      bomgar-scc-20130905-143949 UNKNOWN (missing value)
      USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
      WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
      WDSecurityHelper Application (/Applications/WD Security.app/Contents/Resources/WDSecurityHelper.app)
      USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
      bomgar-scc-20130819-104735 UNKNOWN (missing value)
      bomgar-scc-20130905-143949 UNKNOWN (missing value)
      HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
      HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    Internet Plug-ins: ℹ️
      SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 [Support]
      CouponPrinter-FireFox_v2: Version: 5.0.5 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 600 - SDK 10.10
    User internet Plug-ins: ℹ️
      npBcsMcTcIO: Version: Unknown [Support]
    Safari Extensions: ℹ️
      Trend Micro Toolbar [Installed]
    3rd Party Preference Panes: ℹ️
      Carbonite  [Support]
      Flash Player  [Support]
      Paragon NTFS for Mac ® OS X  [Support]
      Seagate Dashboard for Mac OSX  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      HD: Disk size: 498.88 GB Disk used: 493.84 GB
      Destinations:
      Jens Seagate Backup [Local]
      Total size: 999.86 GB
      Total number of backups: 6
      Oldest backup: 2014-06-24 10:33:56 +0000
      Last backup: 2014-12-17 17:14:18 +0000
      Size of backup disk: Too small
      Backup size 999.86 GB < (Disk used 493.84 GB X 3)
      My Passport for Mac [Local]
      Total size: 2.00 TB
      Total number of backups: 14
      Oldest backup: 2013-08-21 19:19:35 +0000
      Last backup: 2014-12-19 11:44:23 +0000
      Size of backup disk: Excellent
      Backup size 2.00 TB > (Disk size 498.88 GB X 3)
    Top Processes by CPU: ℹ️
          6% coreaudiod
          5% CarboniteDaemon
          4% iMovie
          3% JustCloud
          3% Wondershare Player
    Top Processes by Memory: ℹ️
      335 MB iPhoto Library Manager
      180 MB Finder
      142 MB iMovie
      70 MB Preview
      51 MB Microsoft Word
    Virtual Memory Information: ℹ️
      149 MB Free RAM
      1.04 GB Active RAM
      897 MB Inactive RAM
      1.17 GB Wired RAM
      30.53 GB Page-ins
      1.42 GB Page-outs
    Diagnostics Information: ℹ️
      Dec 26, 2014, 05:17:12 PM /Library/Logs/DiagnosticReports/iPhoto_2014-12-26-171712_[redacted].cpu_resourc e.diag [Details]
      Dec 26, 2014, 03:47:17 PM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-154717_[redacted].cp u_resource.diag [Details]
      Dec 26, 2014, 02:22:01 PM Self test - passed
      Dec 26, 2014, 11:48:03 AM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-114803_[redacted].cp u_resource.diag [Details]

    You have nearly run out of disk space.  Either purchase a larger one or start cleaning out the one you have?

  • My Macbook Pro is running really slow and programs keep crashing

    I have a 15" MacBook Pro (Mid 2010 Model) that is doing my head in, as it runs really slow most of the times as soon as I open more than one program (especially if I use Excel or Word of course). I ran the EtreCheck and the result is below, hopefully this will help some of you guide me in the right direction?
    Most of my memory (over 200GB) is used up by "OTHER", any idea what that could be and how I could easily free up space?
    Thanks a lot
    EtreCheck version: 2.1.8 (121)
    Report generated 17 April 2015 08:02:01 BST
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro6,2
        1 2.4 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 155
    Video Information: ℹ️
        Intel HD Graphics - VRAM: 288 MB
        NVIDIA GeForce GT 330M - VRAM: 256 MB
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:16:25
    Disk Information: ℹ️
        Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (64.39 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        JMicron Samsung S2 Portable 1 TB
            EFI (disk2s1) <not mounted> : 210 MB
            TIME MACHINE (disk2s2) /Volumes/TIME MACHINE : 999.86 GB (70.54 GB free)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Inc. Built-in iSight
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [loaded]    com.logmein.hamachi (1.0.0 - SDK 10.9) [Click for support]
            /Library/Extensions/tap.kext
        [not loaded]    foo.tap (1.0) [Click for support]
            /Library/Extensions/tun.kext
        [not loaded]    foo.tun (1.0) [Click for support]
            /System/Library/Extensions
        [loaded]    com.logmein.driver.LogMeInSoundDriver (4.1.48f99) [Click for support]
        [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.67) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) [Click for support]
    Startup Items: ℹ️
        tap: Path: /System/Library/StartupItems/tap
        tun: Path: /System/Library/StartupItems/tun
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.logmein.hamachimb.plist [Click for support]
        [running]    com.logmein.logmeingui.plist [Click for support]
        [running]    com.logmein.logmeinguiagent.plist [Click for support]
        [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
        [failed]    com.rim.BBLaunchAgent.plist [Click for support] [Click for details]
        [running]    com.trusteer.rapport.rapportd.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.hamachix.tuncfgd.plist [Click for support]
        [running]    com.logmein.hamachi.plist [Click for support]
        [running]    com.logmein.logmeinserver.plist [Click for support]
        [loaded]    com.logmein.raupdate.plist [Click for support]
        [failed]    com.rim.BBDaemon.plist [Click for support] [Click for details]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
        [not loaded]    jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
        [running]    ws.agile.1PasswordAgent.plist [Click for support]
    User Login Items: ℹ️
        Dropbox    Application  (/Applications/Dropbox.app)
        Skype    Application  (/Applications/Skype.app)
        Microsoft Database Daemon    Application  (/Applications/Microsoft Office 2008/Office/Microsoft Database Daemon.app)
        Spotify    Application Hidden (/Applications/Spotify.app)
        BlackBerry Device Manager    UNKNOWN Hidden (missing value)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        EPPEX Plugin: Version: 3.0.5.0 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        LogMeIn: Version: 1.0.935 - SDK 10.7 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
        LogMeInSafari32: Version: 1.0.935 - SDK 10.7 [Click for support]
        OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
        Picasa: Version: 1.0 [Click for support]
    Safari Extensions: ℹ️
        1Password
        Evernote Web Clipper
        WebRank SEO
    Audio Plug-ins: ℹ️
        EcammAudioLoader: Version: 1.0.3 - SDK 10.8 [Click for support]
        CallRecorder: Version: v2.5.14 - SDK 10.8 [Click for support]
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
        VLC Streamer  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 254.45 GB
        Destinations:
            SAMSUNG [Local]
            Total size: 999.86 GB
            Total number of backups: 36
            Oldest backup: 2012-04-09 11:47:32 +0000
            Last backup: 2015-02-05 20:06:09 +0000
            Size of backup disk: Excellent
                Backup size 999.86 GB > (Disk size 318.84 GB X 3)
    Top Processes by CPU: ℹ️
            11%    WindowServer
             4%    Safari
             1%    Skype
             0%    Dropbox
             0%    rapportd
    Top Processes by Memory: ℹ️
        241 MB    Skype
        206 MB    Safari
        172 MB    Spotify
        129 MB    mds_stores
        120 MB    Finder
    Virtual Memory Information: ℹ️
        2.49 GB    Free RAM
        4.03 GB    Active RAM
        844 MB    Inactive RAM
        1.23 GB    Wired RAM
        2.80 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Apr 17, 2015, 07:54:25 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Safari_2015-04-17-075425_[reda cted].crash
        Apr 17, 2015, 07:42:57 AM    Self test - passed
        Apr 16, 2015, 10:33:24 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/PDFpen_2015-04-16-103324_[reda cted].crash
        Apr 16, 2015, 08:07:28 AM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-04-16-080728_[redact ed].cpu_resource.diag [Click for details]
        Apr 14, 2015, 07:13:57 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-04-14-191357_[redacted].crash

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
    When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

  • Macbook Pro 13' (Late 2011) STILL really slow since updating to Mavericks

    So I've seen a lot of discussions about the same issue and some have threads have been solved, yet others remain unknown. I have the same problem as others that stated they have experience something similar to my case. Just fyi though, that my computer was already really slow prior to upgrading to Mavericks (on Mountain Lion). That was when I decided to do a clean install of Mountain Lion and everything was snappier than ever. It wasn't long until Mavericks came out and I instantly did an upgrade but everything suddenly started slowing down again and it's getting worse. I hope someone can help me out here, thank you.
    EtreCheck version: 1.9.12 (48)
    Report generated July 27, 2014 at 12:39:20 AM EDT
    Hardware Information:
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information:
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 0 days 12:18:52
    Disk Information:
      ST9500325ASG disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Kenichi Kasamatsu (disk0s2) / [Startup]: 499.25 GB (154 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      HL-DT-ST DVDRW  GS31N 
    USB Information:
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information:
      Apple Inc. thunderbolt_bus
    Configuration files:
      /etc/hosts - Count: 70
    Gatekeeper:
      Anywhere
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.adobe.SwitchBoard.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
    Launch Agents:
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    User Launch Agents:
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [failed] com.nero.HSMMonitor.plist Support
    User Login Items:
      iTunesHelper
      Dropbox
      UnlockID
      Google Chrome
      Android File Transfer Agent
    Internet Plug-ins:
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
      LogMeIn: Version: 1.0.935 - SDK 10.7 Support
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      QuickTime Plugin: Version: 7.7.3
      LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
      SharePointBrowserPlugin: Version: 14.0.0 Support
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      JavaAppletPlugin: Version: Java 7 Update 65 Check version
    Safari Extensions:
      Open in Internet Explorer: Version: 1.0
      Searchme: Version: 1.3
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
      Flash Player  Support
      Java  Support
    Time Machine:
      Time Machine not configured!
    Top Processes by CPU:
          16% WindowServer
          15% Google Chrome
          3% hidd
          1% fontd
          0% Dropbox
    Top Processes by Memory:
      160 MB Google Chrome
      135 MB softwareupdated
      98 MB Finder
      74 MB mds_stores
      74 MB WindowServer
    Virtual Memory Information:
      321 MB Free RAM
      1.52 GB Active RAM
      1.20 GB Inactive RAM
      977 MB Wired RAM
      2.54 GB Page-ins
      0 B Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • After ransomeware on my macbook pro it is really slow, is there anything i can do to improve this?

    After getting ransomware on my macbook pro it is really slow, what can i do to improve this? I cleared it from the screen by restarting and holding shift

    If you held down the shift key at startup then you are now booted into Safe Boot Mode which is always slower than the regular boot.
    Restart the system without holding down the shift key.
    What do you mean by Ransom Ware? did you get a POPup claiming to be from the FBI?

Maybe you are looking for