MacBook restarts to blue background when the lid closes-only sometimes????

My Mac has done this periodically since six months after I've bought it. When I close the lid, I hear the restart tone and when I open it back up it's going through a restart process. Most of the time, it starts back up with a blue background (not the normal picture I have as my background) and I'm unable to drag and drop items from an open program to a folder or the desktop (unable to drag a picture from iphoto to the desktop). To remedy the situation, all I have to do is restart the computer normally and it returns to a normal desktop.
I called Apple and they first ad me do an archive and install, which I did with no results (the problem still occurred at least once a day) and then an erase and install which reduced the frequency of the problem but did not eliminate it. I also sent the computer in to the Apple Depot where the replaced the top case, the power management unit, and the heat sync but did nothing software wise. When I got the computer back, I again did an erase and install and the problem is still occurring a couple times a week.
Anyone have any idea on what's going on? Should I keep harassing Apple Care? Will it do any good? I'm about to buy 10.5, but will this fix it? Help!

Bump

Similar Messages

After 10.8.2 update i can no longer wake my macbook from standby with keyboard when the lid is closed

I just updated to 10.8.2 and now i can no longer wake my macbook froom standby when the lid is closed, it directly goes back to sleep
steps to reproduce:
1. attach secondary monitor and keyboard
2. close lid
3. wait 5 seconds for going to standby
4. press any key on keyboard and type in user-credentials (notice how the 2nd monitor becomes the mainscreen)
5. wait 5 seconds
6. standby again
side note:
i also have sudo nvram boot-args="iog=0x0" enabled, because i like to not use the integrated screen when its attached to a secondary screen, but since it goes back to standby right after login this is pretty much pointless

Same here, I think changed something in 10.8.2 that wrecked the "Open-MBP Clamshell Mode." sigh

Sleeping when the lid closes

I know that having the MacBook Pro go to sleep is an excellent feature and the Wake-up time is so fast, but I'm wondering if there is a way I can turn that feature off sometimes. When I sit at my desk, I like to plug it into my monitor and be able to shut the lid for better storage. However, I can't use the monitor when I do that, because my Pro falls asleep. Any suggestions?

I think there is a setting in system preferences to do that.
But I forget how.. ;p
So, when you plug your MBP to other monitor, bluetooth/wired keyboard, and mouse, close the lid and press the keyboard, MBP will wake up.

Windows 10: Open Windows Are Resized When The Lid Is Closed

I have just done the free Windows 10 Pro upgrade. Everything seems to be working fine; except for this issue. Every time I simply close and re-open the laptop lid, the open windows are resized. Most windows get restored to where they started, yet they seem to ALL have been resized and then sized to their previous location. You can tell because minimizing / restoring windows does not remember the actual last size that you used. But some windows DO NOT get resized back where I left them. Chrome in partiular becomes crazy. Sometimes the window becomes maximized; and other times it gets sized to a smaller rectangle at the top left of the screen. You can see all the windows flicker and jump around when you re-open the lid. ... My laptop is the ThinkPad W540. MsInfo32: OS Name Microsoft Windows 10 Pro
Version 10.0.10240 Build 10240
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name COCOTPW540
System Manufacturer LENOVO
System Model 20BG0016US
System Type x64-based PC
System SKU LENOVO_MT_20BG
Processor Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz, 2694 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date LENOVO GNET73WW (2.21 ), 3/12/2015
SMBIOS Version 2.7
Embedded Controller Version 1.11
BIOS Mode Legacy
BaseBoard Manufacturer LENOVO
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Mobile
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "10.0.10240.16392"
User Name CocoTpW540\Steven
Time Zone Eastern Daylight Time
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 7.62 GB
Available Physical Memory 4.08 GB
Total Virtual Memory 8.81 GB
Available Virtual Memory 4.93 GB
Page File Space 1.19 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes Components / Display: Name NVIDIA Quadro K2100M
PNP Device ID PCI\VEN_10DE&DEV_11FC&SUBSYS_221E17AA&REV_A1\4&23A19969&0&0008
Adapter Type Quadro K2100M, NVIDIA compatible
Adapter Description NVIDIA Quadro K2100M
Adapter RAM (2,147,483,648) bytes
Installed Drivers nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um,nvwgf2um
Driver Version 10.18.13.5362
INF File oem86.inf (Section040 section)
Color Planes Not Available
Color Table Entries Not Available
Resolution Not Available
Bits/Pixel Not Available
Memory Address 0xB0000000-0xB10FFFFF
Memory Address 0x80000000-0x91FFFFFF
Memory Address 0x90000000-0x91FFFFFF
I/O Port 0x00004F80-0x00004FFF
IRQ Channel IRQ 4294967289
Driver c:\windows\system32\drivers\nvlddmkm.sys (10.18.13.5362, 10.63 MB (11,142,984 bytes), 7/23/2015 4:02 AM)
Name Intel(R) HD Graphics 4600
PNP Device ID PCI\VEN_8086&DEV_0416&SUBSYS_221E17AA&REV_06\3&21436425&0&10
Adapter Type Intel(R) HD Graphics Family, Intel Corporation compatible
Adapter Description Intel(R) HD Graphics 4600
Adapter RAM 1.00 GB (1,073,741,824 bytes)
Installed Drivers igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igd12umd64.dll,igdumdim32,igd10iumd32,igd10iumd32,igd12umd32
Driver Version 10.18.15.4256
INF File oem76.inf (iHSWM_w10 section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 2880 x 1620 x 50 hertz
Bits/Pixel 32
Memory Address 0xB1400000-0xB17FFFFF
Memory Address 0xA0000000-0xAFFFFFFF
I/O Port 0x00005000-0x0000503F
IRQ Channel IRQ 4294967290
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\igdkmd64.sys (10.18.15.4256, 6.09 MB (6,389,688 bytes), 7/18/2015 12:36 AM)

Minor update: I performed another Windows 10 reset: I reset the operating system, keeping User Files. So the system got re-installed. I ran Windows Update until all updates came down. I also ran the Lenovo System Update and installed all updates. Specifically, at this point, I haven't gone looking for additional drivers, such as the graphics drivers --- and on this dual-graphics, there is no control panel for the high performance NVIDIA GPU ... I don't know if that is making any difference. The bug DOES persist; but behaves marginally different at this point ... at least, the open Chrome window no longer resizes; and the Task Manager doesn't move; but other things still jump around, and the open Control Panel window becomes duplicated. Again, this is just by closing and re-opening the laptop lid. The Lid-Closed behavior is set to "Do Nothing"; and the Intel Graphics is set to High Performacen mode. ... So I don't know if they do, but I would not understand why the graphics would switch when the lid closes: they still might. I have another video that captures the behavior. Again: there is no Lid-Closed action, and just closing and re-opening the lid causes the resolution to switch back and forth. YouTube: https://youtu.be/Qapt3ZyOVE4 ... I would like to see this cured, since it is truly a very annoying bug! Your work becomes disrupted simply from closing the lid.

My macbook pro shuts down OSX and all my programs when the lid is closed

Hi,
I am having a problem. My macbook pro shuts down OSX and all my programs when the lid is closed. I close the lid, and then I hear the shutdown music and then when I open it again it automatically restarts OSX and all my windows and programs are closed, any info gone.
This doesn't happen all the time. Just once a day or maybe twice a day. It seems like it happens basically when I have my computer just the way I want it, to keep an eye on things for the day.
I just recently switched to a mac and while somewhat savvy, I am not a programmer or techie, but it seems to me that when I shut the lid, it should do the same thing every time.
I have a intel core 2 duo 17 inch macbook pro with 2.33 processr and 2 gig ram, if that helps.
I am in alaska and there is no genius bar here and I am hoping to figure this out before I begin bugging our local independant mac store about this.
Thanks in advance,
Lylah
17 inch Macbook Pro Mac OS X (10.4.9) intel core 2 duo 2.33g. 2 gig ram

Ahhh, enlightenment!
That would make sense. What I usually do, after closing the lid, is to wait for the apple to turn off and then set it down on it's side leaning it against the side table. I will try to wait for it to indicate that it is fully asleep before I move it next time. Personally, I prefer my computer to NOT fall asleep at all, but I am told it is not an option. Apparently this function is hardware related accoring to my local mac shop. They tracked it down for me because I hated this feature when I first bought my computer and was trying some way around it.
The shutdown music I was refering to was that music the mac makes when shutting down, which doesnt usually occur when it goes to sleep, unless it is malfunctioning like this.
What does resetting the pmu do? (what is a pmu as well?)
Thank you very much.
Lylah

How can I prevent that emails are downloaded (POP3) when the lid of my MacBook Pro is closed?

How can I prevent that emails are downloaded (POP3) when the lid of my MacBook Pro is closed?

Disable Power Nap in the Energy Saver pane of System Preferences. Uncheck the box marked Enable Power Nap... in each of the tabs.

My Macbook Pro (5,3) sporadically goes to sleep when the lid is open and in use.

My Macbook Pro (5,3) sporadically goes to sleep when the lid is open and I am actively using it. This problem happens both with OS X 10.7.2 and Windows 7 (64bit), so I don't think it's an OS issue. Has anyone else encountered this? It's still covered under apple care... But I'd rather try to fix it myself before having to bring it in.
Thanks!

I wouldn't be surprised if this were the case - it does get hot. However, this happens even when I first open it after having it in sleep mode for an entire night... Do you know how to run the diag tool with OS X 10.7?

My macbook wakes up and then goes back to standy even when the lid is open.

so my macbook turns on and then the screen stays on for like 2 seconds then goes back to standby. it does not shut down because when i wake it up again by pressning any button, it is where i was before. Also when it is in standy even when the lid is on, the standby light blinks as if the lid is closed. i can never use it because the screen only stays on for 2 seconds then turns off going to stand by. does anyone have a similar problem or know how to fix this?
thanks in advance!

mkedge wrote:
it worked for snow leopard.
now, in Lion, when you open the lid, it automatically detects that you opened and it turns on macbooks display
That's called progress!

Can i choose the resolution of my external display for when the lid is closed when my lid is open

When I close the lid of my MacBook Pro for an external display apple chooses a resolution that isn't compatible with my display can I choose the resolution when the lid is open in any way of my external display for the mode when the lid is closed?

Hi there, I had a similar problem and was unable to resolve it. I spent about an hour on the phone with a very helpful AppleCare rep who was also completely stuck. It would seem that the only solution is to choose a setting with trial and error while the lid is closed.
My MacBook ended up getting stuck on a closed-lid reoslution that wasn't supported, so I had to do a screen-share with another device to see what the video card was sending to the external display and change it back that way.

Blue background when scrolling, nvidia GTX670, 301.64 drivers

After upgrading video card to Nvidia GTX670 with 301.64 drivers, all firefox windows show a blue background when scrolling.
[http://www.flickr.com/photos/78895346@N07/7227064448/ screenshot]
The problem goes away if hardware acceleration disabled, but stays when all plugins disabled or smooth scrolling enabled/disabled.
Screen is 1920x1200, Windows 7 64-bit, i7-920 CPU.

As you've confirmed yet again, the hardware acceleration feature doesn't work equally well with all graphics drivers.
I don't know whether there is a place to report specific problem combinations; you could try the Help > Submit Feedback feature, and try to copy/paste from the Graphics section from the bottom of Help > Troubleshooting Information

[SOLVED]Gnome 3.4 is not suspending when the lid is closed.

Hey..
Since upgrading to gnome 3.4.1, my laptop does not suspend when the lid is closed.
I have read this this thread without getting a clear answer...
I have checked the setting in gnome tweak tool, and they are both set to "Suspend"
The laptop has no problem suspending, if i run the command, or choose the option in the menu to the right.
Is this a bug ?
What can i do to fix it. ?
Last edited by Munken (2012-06-20 05:54:08)

See this thread for updates on the problem.

Powerbook does not sleep when the lid is closed

my tibook does not go to sleep when i close the lid. the screen stays on when the lid is closed. the screen was replaced a few months ago. i have to hit the power button and choose sleep or choose sleep from the menu. does anyone know how to fix this. Thanks.

Hi, fatchance. You have a hardware issue. The reed switch that puts the PB to sleep when it is closed is a two-part device. The latch mechanism in the main body of the Powerbook contains a magnet (which you can detect by moving a paper clip over it), and the switch itself is located inside the small latch opening in the display bezel. When the display is closed, the magnet is supposed to actuate the switch, putting the PB to sleep. If that isn't happening on your PB, the switch is broken or its wiring is damaged. Either way, the remedy will be to replace the entire display assembly. It's made not to be disassembled. Most technicians won't do so, because of the great likelihood of damaging the display housing/bezel or the display itself while prying it apart (it's epoxied together). Since the display is the PB's most costly part, replacing it merely to fix your reed switch would be a poor bargain, and I can't recommend it. Just put the PB to sleep manually or set a suitable sleep delay in the Energy Saver control pane instead.

System always auto-suspends when the lid is closed

Hello,
I am trying to prevent my laptop (a System76 Lemur Ultra 3) from suspending when the lid is closed. No matter what I change in the configuration, the laptop always suspends when the lid is closed. The output of journalctl is as follows after this happens:
Feb 21 04:35:32 hostname systemd-logind[196]: Lid closed.
Feb 21 04:35:32 hostname systemd-logind[196]: Suspending...
Feb 21 04:35:32 hostname systemd[1]: Starting Sleep.
Feb 21 04:35:32 hostname systemd[1]: Reached target Sleep.
Feb 21 04:35:32 hostname systemd[1]: Starting Suspend...
Feb 21 04:35:33 hostname systemd-sleep[2001]: Suspending system...
Feb 21 04:35:33 hostname kernel: PM: Syncing filesystems ... done.
Feb 21 04:35:33 hostname kernel: PM: Preparing system for mem sleep
Feb 21 04:35:43 hostname kernel: Freezing user space processes ... (elapsed 0.06 seconds) done.
Feb 21 04:35:43 hostname kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Feb 21 04:35:43 hostname systemd[1]: Time has been changed
Feb 21 04:35:43 hostname systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
Feb 21 04:35:43 hostname systemd-logind[196]: Lid opened.
Feb 21 04:35:43 hostname acpid[190]: client 1812[0:100] has disconnected
Feb 21 04:35:43 hostname kernel: PM: Entering mem sleep
Feb 21 04:35:43 hostname kernel: Suspending console(s) (use no_console_suspend to debug)
Feb 21 04:35:43 hostname kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Feb 21 04:35:43 hostname kernel: sd 0:0:0:0: [sda] Stopping disk
Feb 21 04:35:43 hostname kernel: PM: suspend of devices complete after 1092.547 msecs
Feb 21 04:35:43 hostname kernel: PM: late suspend of devices complete after 0.556 msecs
Feb 21 04:35:43 hostname kernel: jme 0000:03:00.0: wake-up capability enabled by ACPI
Feb 21 04:35:43 hostname kernel: ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Feb 21 04:35:43 hostname kernel: ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Feb 21 04:35:43 hostname kernel: PM: noirq suspend of devices complete after 66.095 msecs
Feb 21 04:35:43 hostname kernel: ACPI: Preparing to enter system sleep state S3
Feb 21 04:35:43 hostname kernel: PM: Saving platform NVS memory
Feb 21 04:35:43 hostname kernel: Disabling non-boot CPUs ...
Feb 21 04:35:43 hostname kernel: smpboot: CPU 1 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 2 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 3 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 4 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 5 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 6 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 7 is now offline
Feb 21 04:35:43 hostname kernel: Extended CMOS year: 2000
Feb 21 04:35:43 hostname kernel: ACPI: Low-level resume complete
Feb 21 04:35:43 hostname kernel: PM: Restoring platform NVS memory
Feb 21 04:35:43 hostname kernel: Extended CMOS year: 2000
Feb 21 04:35:43 hostname kernel: Enabling non-boot CPUs ...
Feb 21 04:35:43 hostname systemd-sleep[2001]: System resumed.
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Feb 21 04:35:43 hostname kernel: CPU1 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 2 APIC 0x4
Feb 21 04:35:43 hostname kernel: CPU2 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 3 APIC 0x6
Feb 21 04:35:43 hostname kernel: CPU3 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 4 APIC 0x1
Feb 21 04:35:43 hostname kernel: CPU4 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 5 APIC 0x3
Feb 21 04:35:43 hostname kernel: CPU5 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 6 APIC 0x5
Feb 21 04:35:43 hostname kernel: CPU6 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 7 APIC 0x7
Feb 21 04:35:43 hostname kernel: CPU7 is up
Feb 21 04:35:43 hostname kernel: ACPI: Waking up from system sleep state S3
Feb 21 04:35:43 hostname kernel: ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Feb 21 04:35:43 hostname kernel: ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Feb 21 04:35:43 hostname kernel: PM: noirq resume of devices complete after 133.251 msecs
Feb 21 04:35:43 hostname kernel: PM: early resume of devices complete after 0.425 msecs
The first thing I did was to disable systemd's acpi features by setting /etc/systemd/logind.conf as follows:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
IdleAction=suspend
IdleActionSec=45min
However, the behavior was the same as before. I also tried setting
LidSwitchIgnoreInhibited=no
but after reading man 5 logind.conf it seems that this is unnecessary (and it had no effect when I tried it).
acpid is also installed but I have commented out the contents of /etc/acpi/handler.sh as well as all the scripts in /etc/acpi/actions. I noticed that there is also a UPower daemon which was installed as a dependency and thought that it might be triggering the suspend. I tried setting
IgnoreLid=true
in /etc/UPower/UPower.conf but this also had no effect.
systemctl list-units has the following output:
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1b.0/sound/card0
sys-devices-pci0000:00-0000:00:1c.2-0000:02:00.0-net-wlan0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.2/0000:02:00.0/net/wlan0
sys-devices-pci0000:00-0000:00:1c.3-0000:03:00.0-net-eth0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.3/0000:03:00.0/net/eth0
sys-devices-pci0000:00-0000:00:1d.0-usb2-2\x2d1-2\x2d1.2-2\x2d1.2.1-2\x2d1.2.1.1-2\x2d1.2.1.1.1-2\x2d1.2.1.1.1:1.2-sound-card1.device loaded active plugged 0819
sys-devices-pci0000:00-0000:00:1d.0-usb2-2\x2d1-2\x2d1.2-2\x2d1.2.1-2\x2d1.2.1.3.device loaded active plugged Deskjet_5400_series
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata3-host2-target2:0:0-2:0:0:0-block-sr0.device loaded active plugged TSSTcorp_CDDVDW_SN-208AB
sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-subsystem-net-devices-eth0.device loaded active plugged /sys/subsystem/net/devices/eth0
sys-subsystem-net-devices-wlan0.device loaded active plugged /sys/subsystem/net/devices/wlan0
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
media-usbhd\x2dsda1.mount loaded active mounted /media/usbhd-sda1
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
cups.path loaded active waiting CUPS Printer Service Spool
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
acpid.service loaded active running ACPI event daemon
atd.service loaded active running ATD daemon
cronie.service loaded active running Periodic Command Scheduler
cups.service loaded active running CUPS Printing Service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
laptop-mode.service loaded active exited Laptop Mode Tools
polkit.service loaded active running Authorization Manager
postfix.service loaded active running Postfix Mail Transport Agent
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
upower.service loaded active running Daemon for power management
wicd.service loaded active running Wicd a wireless and wired network manager for Linux
acpid.socket loaded active listening ACPID Listen Socket
cups.socket loaded active running CUPS Printing Service Sockets
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
printer.target loaded active active Printer
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
suspend.target loaded active active Suspend
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
74 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Any ideas on what might be causing the system to suspend when the lid is closed would be appreciated.
Thanks
Last edited by Superposition (2013-02-21 15:48:06)

qinohe wrote:You don't have to disable acpi!
Since you made the complete switch to systemd, why not let systemd handle this kind of events?
I was referring to the suggestion of setting acpi=off on the kernel line. systemd can only run a few preset actions on events like lid close (e.g. suspend, poweroff, ignore, etc.). I need to run custom scripts. Also, for some reason I still do not fully understand, it was not working properly. The log in my original post seems to show that it was initiating the suspend.
qinohe wrote:
progandy wrote:Yes, it is easier, but my laptop should react differently depending on the power source. With AC power lid-switch locks the screen, in battery mode it suspends. That is impossible with systemd.
Yes you need something like laptop-mode-tools for that, I know systemd will not do that, for now.
But that is not the issue here!, the issue here is that the llid-switch-button' shouldn't be used at all.
For as far as possible I would still recommend systemd to handle your events!, but it's your decision finally!
You need acpid for that not laptop-mode-tools. This is exactly what apcid is for --- running user scripts on ACPI events.
Anyway, I finally have this fixed though I still have no idea what the problem was. I ran out of ideas on how to fix it and #archlinux didn't know either so I went the painful but sure route. I did full reinstall and reinstalled all programs. logind was still behaving as this point (not ignoring it's logind.conf file as it seemed to be before the reinstall) after this so I concluded that the packages installed were not the problem at least with their default configs. After that, I gradually restored the config files I cared about while testing to see if logind still worked correctly. Contrary, to what I expected it never broke and I was able to restore all modified configs and get correct behavior.
I suspect there was some old out of date config file somewhere that was causing the problem but it's hard to say which one it was. I could probably figure it out with a bit more experimentation but have already spent enough time fixing this...
In case anyone else needs a similar configuration, the relevant files are as follows. This sets up the system to lock whenever systemd executes a suspend action. It also sets up acpid to suspend on lid close.
Make sure you have installed acpid and enabled it to run at startup.
/etc/systemd/logind.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
/etc/systemd/logind.conf
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min
/etc/acpi/handler.sh
#!/bin/bash
# Default acpi script that takes an entry for all actions
case "$1" in
button/power)
case "$2" in
PBTN|PWRF)
logger 'PowerButton pressed'
/usr/bin/systemctl poweroff
logger "ACPI action undefined: $2"
esac
button/sleep)
case "$2" in
SLPB|SBTN)
logger 'SleepButton pressed'
/usr/bin/systemctl suspend
logger "ACPI action undefined: $2"
esac
ac_adapter)
case "$2" in
AC|ACAD|ADP0)
case "$4" in
00000000)
logger 'AC unpluged'
/usr/sbin/laptop_mode auto
00000001)
logger 'AC pluged'
/usr/sbin/laptop_mode auto
esac
logger "ACPI action undefined: $2"
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000)
logger 'Battery online'
/usr/sbin/laptop_mode auto
00000001)
logger 'Battery offline'
/usr/sbin/laptop_mode auto
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
case "$3" in
close)
logger 'LID closed'
/usr/sbin/laptop_mode auto
if [ $(cat /sys/class/power_supply/ADP0/online) -eq 0 ]; then
/usr/bin/systemctl suspend
fi
open)
logger 'LID opened'
/usr/sbin/laptop_mode auto
logger "ACPI action undefined: $3"
esac
logger "ACPI group/action undefined: $1 / $2"
esac
# vim:set ts=4 sw=4 ft=sh et:
Last edited by Superposition (2013-02-23 23:15:54)

T540p will not go to sleep when the lid is closed

I recently got a T540p and all settings in Windows 8.1 are set to "sleep" when either the power button or lid is closed. Neither of these work, the screen stays on when the lid is closed. If I let the computer idle long enough, the computer will enter sleep. I've used Lenovo System Update to get the latest drivers and there is nothing outstanding. Could someone please advise if there is anything else to check?

Hi Adamstirtan,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not going to sleep mode on your ThinkPad T500.
Go to Control Panel\All Control Panel Items\Power Options\Choose what closing the lid dose – When close the lid – On battery sleep – Plugged in sleep.
To prevent programs from waking your computer:
Open Power Options by clicking the Start button Picture of the Start button, clicking Control Panel, clicking System and Security, and then clicking Power Options.
On the Select a power plan page, click Change plan settings for the plan that you want to change.
On the Change settings for the plan page, click Change advanced power settings.
On the Advanced settings tab, expand Sleep, expand Allow wake timers, choose Disable for both when your computer is running on battery and when it's plugged in, and then click OK.
Hope this helps.
Best regards,
Hemanth Kumar

Internet Connection off when Laptop Lid Closes

Hi. I just bought my first Mac. A macbook pro. I like to leave my AIM or Ichat on but would like to close the lid to my laptop. Everytime I do, it logs me off. I think this is because of the sleep function. Is there a way to configure so that it doesnt lose my internet everytime???

nope, it is a physical hardware switch that disables the internet when the lid is closed. the only way to disable it is to use your computer in clamshell mode, which means you need an exteral moniter, keyboard, and mouse

MacBook restarts to blue background when the lid closes-only sometimes????

Similar Messages

Maybe you are looking for