MacBook run with case closed and external Keyboard/Monitor/Mouse?
I am interested to know if the MacBook will run with the case closed (with power connected and an external mouse/keyboard/video)?
The iBooks did not, the PowerBooks did. It is a feature I use all the time with my Powerbook.
It's documented by Apple to work that way and I've not heard any reports of it failing once the criteria were spelled out to the person who needed lid-closed operation.
But I don't believe this prevents idle time-out sleep (only the sleep otherwise induced by closing the lid). Are you referring to it entering sleep due to the idle time-out expiring?
RRS
Similar Messages
-
macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before
If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton -
Running MBP 15 with lid closed and external screen = damaging screen?
I connected an external screen to my laptop with the lid closed and woke it up through my external keyboard. I am vaguely remembering reports stating that heat is vented through the keyboard as well as through the vents in the back.
Does that mean that running the laptop with the lid closed is damaging the machine or specifically the screen?No, it's fine.
-
Running with lid closed, no external monitor?
Is it possible to run with the display closed without having an external monitor connected? Closing the display without external monitor hooked up always seems to cause computer to go to sleep. Do they do this for heat reasons?
It is just a feature when you close the lid the comp goes to sleep. If you have a external keyboard have you attempted to wake your laptop by pressing a few keys? I know this will wake the laptop if you have a external monitor connected, you may also just click the mouse button to.
-
Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?
3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O. -
Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.
You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you. -
I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?
Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2) -
Tried to install Lion. MacBook is running with showing Apples and other signs (questionmarks etc.) without getting finished after hours. What to do?
The download took hours. But it was completed. After that i got a message that the hard-drive should not be ok. But it started updating the operating system.
Yesterday I now installed Snow Leopard again and started the download of Lion again. Worked faster and is installed now. Now i have a problem with the charger or the battery. -
i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support. -
I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?
Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test. -
I plan to buy a MacBook Pro with retina display and I already own and use Photoshop CS 5 on my PC?
I plan to buy and use a MacBook Pro with Retina display and I already own and use the PS CS 5 on my PC window-based. How can I obtain a copy of CS 5 for my MacBook Pro?
Message was edited by: CHARNCHAN. That is without having to buy another copy for the Mac!Not sure why you'd want CS5 for your new Mac with Retina display.
Retina support was first added to Photoshop in CS6 version 13.0.3
http://blogs.adobe.com/jkost/2013/01/retina-display-support-and-photoshop-cs6.html
So, assuming you own standalone Photoshop CS5 (and you're running at least Windows 7 on your PC) then your best option - for optimal display on your Mac - might be to subscribe to the Photoshop Photography Program for $9.99/month
https://creative.adobe.com/plans/offer/photoshop+lightroom?sdid=KIHZP
Then you'll get Photoshop CC + Lightroom 5 + extras and you can run them both on your Mac and Windows (2 installs permitted regardless of operating system) for the same $9.99 monthly fee.
If you don't want to subscribe then your other option would be to buy a separate CS6 license for Mac (paying full price). -
Will my Macbook running 10.5.8 and itunes 10.6.3 sync an iphone 4 running ios7?
Will my Macbook running 10.5.8 and itunes 10.6.3 sync an iphone 4 running ios7?
No. To update to the latest version of iTunes you need to upgrade the OS to Snow Leopard 10.6.8.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/ -
hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .
Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp -
I have a mid 2010 macbook pro with 4GB memory and need to purchase an additional 4 GB to. Do I need to purchase 8GB of memory to upgrade or can a 4GB upgrade be placed next to the existing memory?
You need to purchase 8 GBs as two 4 GB modules. Must meet these requirments:
Maximum Memory
8.0 GB
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM -
Cisco ISE with both internal and External RADIUS Server
Hi
I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
I will like to know if it is possible to configure it and how I can do it ?
Thanks in advance for your help
Regards
BlaiseCisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.
Maybe you are looking for
-
I have an iPod mini and classic and I to load the music library on to my iPod classic
How do I transfer my music library from my iPod Mini to my iPod Classic. THe control wheel on my mini will not work!
-
I have a report in which I would like to embed a graph. I used the chart wizard in the report builder to design the graph with the data I want to see. When I run the report though, it gives me a "rep-1246: chart document not found." I presume that th
-
Search help for 'Account ID' field in 'Identify Account' section
Hello all, We are on CRM 5.0. I want to attach the search help 'BUPA' for the 'Account ID' field in 'Identify Account' view of IC Webclient. Can you please let me know how I can achieve this. Regards, Nag
-
Post Processing Tags. I am making use of a markup tag library called the WALL. Specfically used for Wireless Applications. You dont really need to have any knowledge of the WALL except to know that what it does is simply create the correct Markup lan
-
SysError 0 during open of "PIDefines.h".
i'm stumped on this. i got the sample dissolve project working out of the box on xp, but the xcode version fails with the error: SysError 0 during open of "PIDefines.h". this is in reference to line 11 in Dissolve.r: #include "PIDefines.h" if i right