Macbook Running 106 and PowerBook G4 Running 10.5 Can't FileShare

I recently upgraded my MacBook Pro to Snow Leopard )10.6) while my wife's aging PowerBook G4 remains at Leopard (10.5). The upgrade went fine, but now I am having problems with connecting the 2 machine so they can share files and drives. Either way (from the PowerBook to the MacBook Pro or vice-versa), the machines show up in the Shared area under Devices. When you click on a computer's name, you get a "connecting" message, then a few minutes later a box pops up and says "Connection failed. The server (name of the computer) may not exist or it is unavailable at this time. Check the server name or IP address, check you network connection, and then try again" with an OK button. I have tried repairing permissions on both computers with them booted off their appropriate DVDs of system software, but I'm having no luck getting the machines to connect. Anyone else have this problem? How might you solve it to get the machines to connect to each other again? Thanks for any ideas/suggestions you can offer.

It appears the key point in Adobe's system requirements is that a Mac must have an Intel multicore processor, running on 10.5.8 and 1GB of RAM, among other requirements. Sorry, Adobe no longer supports the Power PC architecture, even if running OS10.5.8.

Similar Messages

  • I am currently running OS X 10.5.8 on my MacBook (early 2008) and want to know if I can upgrade to a version that will allow me to use iCloud to sync with my new iPad?

    I am currently running OS X 10.5.8 on my MacBook (early 2008) and want to know if I can upgrade to a version that will allow me to use iCloud to sync with my new iPad?

    I believe to use iCloud you need to run at least Lion (10.7). (Only the Find My iPhone or Find My Mac parts of iCloud work with OS earlier than 10.7/Lion).
    I think you can run Lion but you should check each of the following:
    "To use Lion, make sure your computer has the following:
    An Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    Mac OS X v10.6.6 or later to install via the Mac App Store (v10.6.8 recommended); you can install without Mac OS X v10.6 by using an OS X Lion USB Thumb Drive, available on the Apple Online Store
    7 GB of available disk space
    2 GB of RAM
    If your Mac does not meet these requirements, you will need to upgrade your Mac before installing Lion"
    You have a Core 2 Duo. You can upgrade to 10.6 and then install Lion, or use the thumb drive approach mentioned above (thumb drive Lion costs about $70 I think). You need to check your RAM to see if you have enough.
    Folks have reported that 4 GB RAM is really a minimum for a decent experience with Lion.
    For Mountain Lion, see this ( http://support.apple.com/kb/HT5444 ) for what you need to have to install OS 10.8. I don't think you can use Mountain Lion (10.8) with your early 2008 Macbook.

  • I have a early 2008 macbook 13 inch and dont have the pass word can any one help?

    I have an early 08 macbook that is locked by password and do not know Itunes account. can any one help thanks.

    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite - System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • I have a Macbook Pro 15" and Canon LBP7750Cdn printer. How can i get rid of a ip assigned to the printer previously because it clashed with another device?

    I have canon lbp7750cdn printer. i assigned ip 192.168.1.50 to it to install as network printer. after a few unsuccessful attempts realised the ip was already assigned elsewhere, hence changed ip to 192.168.1.60 and the printer worked. but now when i want to run printer monitor utility (which is part of driver used 
    - lbp7750cdn UFR II uk} it cant load info because it is looking for printer with first ip. { the monitor utility gives status of supplies. thanx in advance for help. Noor.

    Back up all data. Rebuild the mailbox. Try again to delete the message.

  • I just recently purchased Macbook Pro Retina, and I am wondering how I can migrate my stuff from my old MCP to the new one?

    Migration has made my life so much easier two years ago when I replaced my iMAC.
    Now I am replacing Macbook Pro to the new one with Retina display.
    I used to use Firwire to migrate all my data to the new machine.
    However in the new MBP, there is no more firewire, but USB 3.0 and Thunderbolt.
    My old MBP has neither.
    Is it still possible to migrate?  What should I do?

    https://discussions.apple.com/message/18666066#18666066
    https://discussions.apple.com/message/18629022#18629022

  • Will my Macbook running 10.5.8 and itunes 10.6.3 sync an iphone 4 running ios7?

    Will my Macbook running 10.5.8 and itunes 10.6.3 sync an iphone 4 running ios7?

    No. To update to the latest version of iTunes you need to upgrade the OS to Snow Leopard 10.6.8.
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether further updates are required.
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
    http://support.apple.com/kb/HT4759
    You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/

  • IPad2 and a new MacBook running Lion, Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my Hotmail Id for my Apple Id and use it for iTunes, iCloud

    I have an iPad2 and a new MacBook running Mountain Lion. Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my current Hotmail Id for my Apple Id for iTunes, iCloud.
    Note, I will use both Hotmail and iCloud eMail.

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

  • On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    What version of Mac OS X?
    What home page?
    What browser?

  • My hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does sa

    my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please

    If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc.  you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder. 
    You can test this to find out if you saved the media files or not and don't need to attach your nano to do it. 
    You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library. 
    If you don't have the media files i'm not sure if/how to get them back on a windows ipod.  I have everything backed up regularly because of the horror stories I have seen & heard.

  • I have a macbook running on 10.6.8 and my itunes running on 11.1.1 .... i cant get my itunes to show Itunes Radio in my music tabs.... someone help

    I have a macbook running on 10.6.8 and my itunes running on 11.1.1 .... i cant get my itunes to show Itunes Radio in my music tabs.... someone help

    There is also an option to reset all data on the device with the next sync.
    MJ

  • Hello, I have a macbook pro late 2011 15 inch with 4 gb ram. My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Is there a fix?

    My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?

    when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I currently run the Design and Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How do I know whether I can install my Adobe programs onto the new computer? Because I know there is some kind of limit.

    I currently run the Design and Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How do I know whether I can install my Adobe programs onto the new computer? Because I know there is some kind of limit.
    Also, I had to install the software twice on my same computer before because I had to reboot the computer. I don't know if this affects the limit.

    You are allowed to have two activated installations so there should not be a problem having working installations on the two machines.  If by chance you have somehow tied up two activations for the one machine you can have Adobe support help resolve that thru chat.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • HT201250 I run time machine on my iMac using an external hard drive.  I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

    I run time machine on my iMac using an external hard drive.  I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

    How do I set up Time Machine to a shared drive on another Mac?

  • I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. Help!

    I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!!  I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
    My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
    What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
    Thanks for any help!!

    I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!!  I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
    My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
    What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
    Thanks for any help!!

  • Programs have started to shut down my finder bar (iPhoto, iTunes, Photobooth) and now it happens when I try to access my iPhone4 in iTunes. I have a Black Macbook running 10.5.8

    I have a black Macbook running 10.5.8. A while ago iPhoto stopped opening. Time Machine also stopped working properly- it would back up for about 10 gB and then would stop. Photobooth also then began to stop working correctly; it would make my finder bar disappear if I opened it requiring me to shut down the computer and restart. Last week when I went to sync my iPhone4 the same thing happened. Last night I couldn't even open my iPhone4 in iTunes when I tried, closing iTunes and removing the finder bar again. I have been to the Genius Bar and it appears that my harddrive is okay. I have repaired permissions but still this keeps happening. Any ideas on what to do?

    Right or control click the MacintoshHD icon on your Desktop then click Get Info.
    See: Capacity
    Before deleting anymore files, verify the startup disk.
    Open Disk Utility   /Applications/Utilites
    Select MacintoshHD in the panel on the left then select the First Aid tab.
    Click: Verify Disk  (not Verify Disk Permissions).
    If the startup disk needs repairing, follow the instructions for Using Disk Utility to verify or repair disks.
    If the startup disk is ok, try installing the Mac OS X 10.5.8 Combo Update.
    that I can't access my app store to set it up.
    Just so you are aware, you use iTunes to sync, restore, and backup an iPhone, not the App Store for Mac OS X.
    iPhone online user guide available here >  http://support.apple.com/manuals/iphone/

Maybe you are looking for

  • How do I install Air 3.1 to a drive other than C?

    Installing Air 3.1.0 on a Win XP sp3 computer with a partitioned hard drive. How I specify the location for program install so I can put it on D drive?

  • How to configure inbound ruleset in dynamic nat.

    Hi , I have a doubt on configure the inbound rules for dynamic nat. I want to allow my web server (172.16.101.115) able connect from outside with tcp/443. How do I configure the inbound ruleset for allow public connect to my webserver with tcp/443 in

  • So the thing with the attachments in Mail for Mac...

    Hey guys, I've searched and browsed for the last 2 or 3 hours to find a solution to this problem and I've seen that many others are having the same problem and no solution for it. What's the problem? I'm using the standard Mail program on a Macbook P

  • Problem importing packages via ICE??

    Hello, I am running Portal 6.0 on Windows Server. For one of the business package that is to be implemented in my Portal, i have to deploy two files as a pre-requisite that are associated with SAP Note 660777(https://service.sap.com/sap/support/notes

  • Differenct between Net Value and Document Value on a sales order

    Can someone please explain what is the difference between the Net Value that we see on the sales order (VA03) and the 'Document Value' thats checked against in Dynamic credit checking? Thanks