Macbook screen blinks, goes to a blue screen, and then acts like it restarted.

And the weird thing is, it never actually restarts--my entire home screen looks as though it has. Goes through all of the normal just-turned-on commands. It's done this to me twice; once while I was putting a file into my other computer's drop box, another while I was trying to save a document on Word. This happened over the course of two days. I just got my hard drive and battery replaced in the spring, and I have absolutely no idea what could have caused this. Any ideas?

Can startup using your install disk? If so click on the language then go to the top menu and run disk utilities and permission repair.  Otherwise do a system reset. Battery out power unpluged hold power button for 5 seconds. If the battery can't come out- With power pluged in hold down-Control Option Shift key while powering up release and boot up. Let me know how it works.

Similar Messages

  • I have an HP laptop preloaded with Adobe Premiere Elements 10. For whatever reason Elements will "run" on click, but not even open the load screen or anything and then act like I never tried to open it? whats going on?

    I bought my HP laptop in 2012, and it came preloaded with Adobe Premiere and Photoshop Elements 10
    It worked fine and I even made a few video edits back in 2012 but for the last year Elements just REFUSES to work properly
    I used to be able to open elements to at least the "what do you want to do?" screen
    But now It won't even open this...I have no idea why...
    If I double click the Elements application my computer slows down, bracing itself to load, and then ....thats it....it reverts to its normal speed and elements just doesn't open...
    Any help would be great cause I feel like I've exhuasted all self-troubelshooting options and need to either get help from the forums or take the laptop in before I smash it in rage

    thrillhousecody
    Thanks for the reply with additional information.
    Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
    being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
    that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
    to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
    Can you disable one or the other card to determine the impact of this on your problem?
    But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
    Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
    version is rolled back to about May 2013. This may be one of the major factors here.
    a. Device Manager/Display Adapters and find out Driver Version and Driver Date
    b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
    ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
    Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
    driver version roll back.
    Please review and consider and then we can decide what next.
    Thanks.
    ATR
    Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
    later versions of Premiere Elements.

  • My Macbook will not boot the operating system.  It just goes to a blue screen after the apple logo and the spinning wheel goes off.  I took the battery out and held the on/off button for five seconds and reset the PRAM.  I have the old mac os disk.

    My macbook will not boot.  It goes to a blue screen after the logo and wheel goes off.  I have taken the battery out and held the on/off button for five seconds and reset the PRAM.  I have the the original os disk but have not put it in for fear of losing un backed op data.
    Thanks
    Rich

    You won't lose any data unless you erase your hard drive.
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
    If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

  • MacBook not booting up, stuck on blue screen

    I just got my MacBook and a friend of mine who is quite experienced with Macs had it for the weekend just to look at and play with... I got it back and it isn't booting up. The grey Apple screen comes up, the little spinning line-circle shows up, then it goes to the blue screen that usually comes before the "Starting up Mac OS X" screen, but it stays blue and the fan spins up and no progress is made and the process cant be broken without force shutting down the computer. If it is necessary to erase the hard drive and reinstall Tiger, I can do that, as my data is backed up... but what would I do?

    Try a PRAM reset...
    http://docs.info.apple.com/article.html?artnum=2238
    and/or an SMC reset...
    http://docs.info.apple.com/article.html?artnum=303319
    Failing this, start up from your Install DVD and run Disc Utility to repair/verify the permissions and the drive itself.

  • When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    You can take some of the steps here, #4, #5 or even trying a #18
    Step by Step to fix your Mac
    but I suspect your going to first have to create a data recovery drive
    Create a data recovery, undelete boot drive
    to get your data off the machine,
    then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
    Step by Step to fix your Mac

  • Why is my MacBook Pro **crashing** changing to a blue screen with lines or distorted screen when I open logic or Ableton Live

    Why is my MacBook Pro **crashing** changing to a blue screen with lines or distorted screen when I open logic or Ableton Live. Then I have to restart by long pressing the power button. Can somebody plz help me

    What you describe sounds like a hardware issue. Unfortunately, you'll need to get that checked out by Apple. If you have an Apple Store near you, make an appointment with the Genius Bar and take the machine in for evaluation.

  • My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

    My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

    Restart the computer and immediately hold the Option key down.
    Select the Recovery partition and continue.
    On the next pane, select Disk Utility and continue.
    When DU opens, select your hard drive in the left column, click the First Aid tab, the click Repair Disk.
    When that is done, quit DU and restart in the usual way.

  • Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

    Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My Macbook starts up, goes to the white screen with the gray apple, the little loading sign loads, and color wheel appears, and DOES NOT STOP PEIROD!

    My Macbook starts up, goes to the white screen with the gray apple, the little loading sign loads, and color wheel appears, and DOES NOT STOP PEIROD!
    Even when I restart, shut it down; or when it runs down to no battery, when I plug in the power cord for a while, it loads up to the same stinking screen!
                                                      PLEASE HELP ME!

    Restart the computer and immediately hold the option key down.
    If the computer boots and you see two hard drive icons, use the arrow key to select the Recovery drive, and press Return.
    You will get to a screen that looks like the image here:
    http://www.apple.com/osx/recovery/
    Select the fourth item and press Return.
    In Disk Utility, select the hard drive in the left column, then First Aid, then click on Repair Disk.
    When that is done, quit DU and restart the computer.

  • Macmini 2011 on lion, goes to a blue screen om monitor when awakening from sleep mode, last 3 or 4 seconds, can anyone help? Thanks

    Macmini 2011 on lion, goes to a blue screen on monitor when awakening from sleep mode, last 3 or 4 seconds, before desktop appears, can anyone help? Thanks

    Depending on the system configuration, this may not
    be unusual.  The Mini that I use for my home theater,
    which is connected to a receiver then to a TV, all via
    HDMI usually takes a couple seconds to come up just
    the way yours does.  Same happens when I switch sources
    on the receiver.  Actually, it starts with the blue screen and
    will sometimes flash before the desktop comes up.
    It seems that when HDMI goes dormant, there is handshaking
    that needs to be re-established, at least thats my SWAG on it.
    On the other hand, the Mac Mini Server that I use as a work
    station and is connected to a Thunderbolt Display, wakes to desktop
    in a second, maybe two.  On this combo, it just comes up to
    the desk top.
    It also probably depends on what processes were active when
    the Mini was put to sleep.  So it may take some time for it to get around
    to reloading the desktop.

  • When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

    When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?

    Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?

    What kind of noise?
    The only things I can think of that make noise are fans and disks. Fans usually will not cause the computer to shutdown as you describe. My guess is your disk drive died. I hope you made a backup prior to start the ungrade.
    Allan

  • Grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced 6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen

    grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (sorry, I think  it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
    Thanks for any help!

    You have to take the computer to the Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • My ipod touch (2nd generation) is stuck on the usb to itunes screen.  I have NOT jailbroken it, and i have alsop tried restarting numerous times. I need help, soon!

    My ipod touch (2nd generation) is stuck on the usb to itunes screen.  I have NOT jailbroken it, and i have also tried restarting numerous times. I need help, soon! Itunes on my computer works about 50% of the time, so i feel lost!

    Download RecBoot and see if you can kick it out of recovery mode.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • I can't get my computer to boot up.  The screen is white with a file folder and then at ? in the middle

    The screen is white with a file folder and then at ? in the middle

    Before declaring that the disk is dead (which is a common cause for what you are seeing), try the steps outlined in this article:
    http://support.apple.com/kb/TS2570
    This article also has some troubleshooting steps you can try:
    http://support.apple.com/kb/ts1417
    If you don't have your original system disks, you can boot into single user mode folloing these instructions:
    http://support.apple.com/kb/ht1492
    and then following the directions for running the fsck command in the second article I list above.
    I would try these things before giving up and assuming that the disk is dead. The flashing question mark indicates that a valid boot disk cannot be found. One cause for this is that the disk has experienced hardware failure. However another cause could be that the system and boot files on that disk are somehow damaged (perhaps from a power surge or an improper shutdown of the computer) and in some cases the above repair steps can restore them to working condition.

Maybe you are looking for