Macbook screen goes few seconds to black screen

I didn't use my macbook for couple month and a couple days ago I did an software update. Now I was working yesterday on the macbook and my screen turned 4 times to a black screen. It was while i was working on the internet or on a word document... the computer don't turn off but only the screen goes black for 5-10 seconds. after clicking or something else the screen goes back to where it was.
Can some one help me please?

And when the Macbook goes back to the normal screen it makes the same sound as when the computer goes from sleeping mode to normal...
Hope that some one can help...
Thanks!

Similar Messages

  • Ipod touch 5th generation battery screen with lightning bolt locked cannot charge or restart.  ive tried everything from new cables attempting to shut down but stays at screen for a few seconds then black screen again over and over

    screen locked up and shows the battery with low red and ligtning bolt and cannot hard shut down or reset just stays there for a few seconds then black screen. hooked up to computer and itunes doesnt recognize it or even shows that it is pluged in.  looked and made sure nothing is broken or metal in ligting port or on cable which would prevent it from accepting a charge. ipod is only a month old and seems like a waste of money if its so hard to try to get an explanation of why this is ive been tryning to get an answer from apple for a week now.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Macbook spontaneously goes into sleep mode and screen off mode

    Hi. My Macbook spontaneously goes into sleep mode and screen off mode with varying time between each instance. It usually goes for a few minutes or even hours without doing it and then will go through periods of fluctuation between the modes. I believe this to have started with a minor orange juice accident rather than it being anything software related.
    Any ideas as to how I might rectify the problem? Thanks very much in advance,
    Danny

    When you say it goes into sleep mode ...do you mean you actually see the white pulsing light?
    It may be that there is an application running (perhaps in the background) that is keeping your book awake. Printer software sometimes does this for example ...try logging out and seeing if it sleeps like that. If it does, then it very well may be a background process running.
    You may find some items in System Preferences/Accounts/Login Items that may be the culprit.

  • Streaming freezing while playing, unless I touch the screen every few seconds to keep the streaming actively flowing.

    Streaming from iPad, through an app and the streaming will stop unless I touch the screen which seems to wake it up and will begin from where it stopped. Can anyone tell me why it does this? Kind of makes watching something a little annoying. It's as if the iPad goes to sleep, which stops the streaming. Is there a way to keep the streaming going without having to touch the screen every few seconds to have a the streaming continue as a steady feed?
    Thanks,
    David H.

    If you are streaming through an app it may need it to be awake so it can receive the feed on the iPad and then airplay it, depending on how  the app functions. You can set the auto lock to never

  • I opened my MacBook Pro to a dark gray/black screen. Rebooted several times to no success.  Pressed the "sunrise" button to no success.  Computer only 14 months old.  Any suggestions to get this puppy working?

    I opened my MacBook Pro to a dark gray/black screen.  Rebooted several times with no success.  Pressed the "sunrise" key several times with no success.  Any suggestions to fix this?

    Do you have AppleCare? Even if you don't, take to the Apple store and tell them what happened. They should help even though it's a few months out of warranty. You might have to talk to a manager or different higher up.

  • Help MacBook Pro 13" early 2011 suddenly black screen in Windows 7 SP1. EFI 2.2.

    Hi, everyone, I need help here.
    Apple MacBook Pro 13" early 2011 preinstall Lion version, EFI 2.2, Boot Camp 4.0. suddenly black screen in Windows 7 SP1 (black screen and also no sound at all, need to press power button to off). What happen?? Please someone tell me what to do?
    I have delete bootcamp HD and reinstall windows 7 but the problem is still here, I have reset PRAM and SMC too.
    The video on the black screen: (http://www.youtube.com/watch?v=z3dLTFSD-v8)

    Oh I actually have the problem in Mac OS, not even using the Bootcamp or Windows 7
    Csound1 wrote:
    lokiman wrote:
    I am having the exact same problem with my 13" early 2011 Macbook Pro. I have 10.6.8. I used the disk that came with the laptop to restore the OS to 10.6.7 but the problem existed there too. I have now updated it back to 10.6.8. The problem still exists. This doesn't seem to be limited to an OS version and seems like an issue with device driver or with hardware. I will try to take it to the Apple store and see if this gets resolved.
    You too have a black screen in Windows 7. ?

  • After iOS7 update I cannot launch the music app. It crashes after a few seconds of white screen. What to do?

    Just updated my iPhone 5 (16g) to iOS7 and now I cannot launch the music app anymore.
    It opens and then just crashes after a few seconds of white screen.
    Also If I go to Settings General About the phone crashes all the time after just a few seconds. :-(
    Andreas

    The same for me. iPhone 4S, itunes match and upgrade to ios7 by air.
    So what we have:
    1) Music app does not launch (white screen then close)
    2) About screen crashes (I guess once it tries to calculate music space)
    3) Spotlight does not show any results (no care what I set to search in in the preferences)
    4) iTunes Match slider can not be set to Off. However, it is possible to logout from AppleID, then it off. But this does not change the situaton at all
    5) Podcast app does not launch
    I tried to reboot, to sign in with another Apple ID, to turn off itunes Match, to reset all preferences. Nothing helps.
    Things to try:
    - reset all preferences and content
    - reinstall ios7 with itunes from scratch
    - switch to windows phone

  • IPhone 3G screen goes white with thin black moving lines.

    iPhone 3G screen goes white with thin black moving lines.What gives?
    HowieG1

    hello
    Dear
    The two crashes iPhone suddenly does not work never
    It does not work and is the connection between the device and iTunes
    What is the solution?

  • IMac G5 having blue screen every few seconds

    My iMac G5 keeps having a blue screen every few seconds. Any tips?

    Impossible to even guess from information provided.
    Please provide more details if you wish to be helped.
    Allan

  • My MacBook won't start up. Black Screen.

    My MacBook Air won't startup.  Black screen.  No sound.  Nothing.

    Try booting from your install DVD. What happens then? Can you see anything?
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • My iphone 5 screen has been cracked. Black Screen. Constant beeping.

    My iphone 5 screen has been cracked for a few weeks but worked fine. Yesterday the screen went black but Siri still worked. When I plugged it in to charge, it started beeping as if i were constantly unplugging it then plugging it back in. At first the screen would light up even though it was black but now the screen wont light up at all. I ordered a new screen to replace it but now I am thinking that it is more than the screen. I plugged it in to my computer and it doesn't recognize it at all. Use the same cord to plug it back in to the wall and it starts beeping again. Could the screen cause all of this or is it a bigger problem? Please help!

    Agree with the comments of FelipeV the crux of the matter is that mpeterson329 abused his phone.
    Also agree with the below comment:
    Peter GillespieSep 1, 2014 9:18 AM Re: My iphone 5 screen has been cracked. Black Screen. Constant beeping.
    in response to mpeterson329
    Have you dismantled the iPhone in any way yet ?
    <Edited By Host>

  • E7 screen lock without screensaver or black screen...

    Is there a way to lock the E7 screen lock without screensaver or black screen?
    With the almost over-sensitive touch screen interface there is a constant danger of hitting a function by accident, therefore one must have the screen locked at all times. However, it would be important to see the home screen or the running application.
    I use S2PuTTY for work and I need to see the screen, with or without backlight, not a clock display or blank screen. With S60 this was no problem, that's why I have an E72 for backup and SSH use. The E7 would be a better phone for this, if only it would show the contents of the screen while being screenlocked.
    Any hacks or software for this? A transparent screensaver perhaps? Anyone..? This instant-blank screen was IMHO a stupid thing to copy from iPhone, especially when it won't even save any battery power because of the backlight and the clock display.

    seppuku wrote:
    The only way would be extending the screen saver timeout to max 30 minutes (AFAIK).
    E7 has an AMOLED display which does not have any backlight, so the less lit pixels on screen the less power it uses.
    No, the timeout setting only adjusts the time it takes for an unlocked display to autolock. When it does, it goes black or clock. The same as turning the lock switch.
    I need a touch screen with screen on and touch sensitivity off. It doesn't have to be forever, but say 10min at a time would be needed. I'm amazed that the UI designers have forgotten about the possible need to see what the phone is doing while safe from inadvertant touch input.
    (You're right about the AMOLED)

  • Editing a few seconds of 'black'

    Okay... new problem today... LOL
    I'm working on an 11 minute clip, and I have to make 2 cuts in it. I just want to add in a few seconds of 'black' in between those two cuts, but I can't figure out how.
    I'm still used to HD06 (which I still prefer)
    I just thought I could 'pull' the clip and it would leave the space black in between (like 06) but it doesn't seem to work that way.
    Any suggestions?

    If you look in the Maps browser over on the right, you will see some backgrounds you can use, including black. Just drag the black one where you need it, and then you can adjust its duration.
    The other way to accomplish this would be to drag a title and drop it between the clips. It will default to a black background, and you just don't add any text to the title.
    I recommend the first method.
    Message was edited by: AppleMan1958

  • Black screen for few seconds and only mouse can be seen and moved

    Hi all,
         Sometimes, after logging in appears the desktop and programs, but after few seconds, the screen goes black, only mouse can be seen and moved, and after few seconds again it go to sleep mode. why ?
         after this I log in again and it works just fine.
    Thanks,
    Harry

    This is not at all clear.  What do you mean by "the preview screen".  Do you mean Outlook invokes the Preview app or what.
    Please take the time to describe the situation, your steps taken, what you observe in clear detail using accurate descriptions.  Can't help you if you continue to be vague in what you write, I'm sorry.
    If it is an Outlook issue, you'll need to take it up in the Microsoft forums as well maybe.

  • My Macbook starts up but with a black screen until I shift key and reboot it a few times

    Hi
    I am not very technically at all, I am posting this because I haven't been able to get an appointment with apple for weeks. 
    I mac book is around 3/4  years old, hardly used, its 17inch and all the software is up to date.
    in the last week every time i turn on my laptop the screen goes to black and I have to hit shift and the power button a few times before it works. Once it is on it works perfect. i have never dropped the laptop.
    What is wrong and how do i stop this?
    thank you for your help and time.
    Janette x

    You are welcome!  
    Sometimes resetting the SMC "fixes" odd problems. Glad I could help.
    Barry

Maybe you are looking for

  • SSO to BSP using NTLM with application parameters

    Hi all, As part of the CRM activity, the customer's system sends out an email to a user with a link pointing to a bsp. Part of the url is the call id which the bsp needs to display. The customer does not wish for the users to input user/pass when acc

  • How to fix an object in one layer to an object in another layer?

    I have tried to find a soloution to this in the forum, but perhaps my english not being native prevents me from using the correct search terms - so here it is for you to solve Layer one: background with some rocks Layer two: a person standing in fron

  • Issue in Passport Country 2 and Passport Country3  in ESS Portal

    Hi, In SAP Portal  Personal Data -Passport  Country 1 All datas are getting saved in Overview Screen But in Passport Country 2 and Passport Country 3 datas are not getting  saved  in Overview Screen  and  not getting the data from the backend also. I

  • Dequeue with wait=10 hangs forever

    I created a queue on 9i with EXEC DBMS_AQADM.CREATE_QUEUE_TABLE (queue_table => 're2_t', queue_payload_type => 'SYS.AQ$_JMS_TEXT_MESSAGE', multiple_consumers => FALSE); EXEC DBMS_AQADM.CREATE_QUEUE (queue_name => 're2', queue_table => 're2_t', max_re

  • Photo Booth and hard reset

    Recently I wanted to show my friend photo booth. I chose it from the dock, but it kept jumping without coming on. I launched activity monitor to see if something wasn't eating my RAM, but it showed only photo booth in red. I then tried to force quit