Macbook sees bellsouth wireless dsl but won't connect
My macbook sees the wireless signal from my bellsouth modem and it says it is connected but when I try to get online it says I am not connected? any ideas? I have searched the forums but can't find the answer..
No definite solution, but a few ideas:
You may want to try connecting through ethernet; if this works, you've narrowed down the issue. A router reset is a basic step. You can also try changing your security settings. My router will only work with my macbook with WEP encryption, for instance, not WPA.
Hope this helps a little,
Similar Messages
-
Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.
I had the same problem. I did the reset networks on my iPhone & it did not work. My husband read somewhere that changing the channel on the router to manual & selecting the highest available channel number might help. I did that & it solved the problem. I have not had the problem since.
-
Windows XP laptop sees wireless network but won't connect
I set up a wireless network on my airport extreme using my MacBook. The McBook runs great on the wireless network. My old Dell laptop running Windows XP sees the wireless network I created (with full signal strength) but every time I hit "connect" I get the following error message, "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again." When I referesh the list, the wireless network is still there, and i still cannot connect, getting the same error message.
Any suggestions?Hello apetera. Welcome to the Apple Discussions!
Per chance are you using WEP for your wireless encryption?
If so, one of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa.
You may find the following articles helpful:
o Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
o Apple article, especially the part about "Third-party client to Airport". -
New MacBook Air just started up but won't connect to our wifi connection. Anyone able to solve this?
Just started up my boyfriends new MacBook Air and have tried to connect to the wifi with the correct password but says the ip is wrong or something and just won't connect... Any help would be great.
Your boyfriends new MacBook Air comes with 90 days of free Apple phone support, which you may want to use. Phone numbers are here.
-
Laptop sees Photosmart on network, but won't connect
I have a Pavilion dv4 with Windows 7. I have a Photosmart C4795. My printer used to be hooked up to my desktop, but my HP Desktop has crashed and it's trash. So now I'm trying to hook my laptop up to my printer on the network. For two days, I was able to connect and download with no problems, but my laptop would never print. Wouldn't even do a test page. Uninstalled and reinstalled at least 10 times. I ran the scan doctor and it said there was nothing wrong with my printer, but it wouldn't print a test page either. It then had me do an internal test page and that one work, so it diagnosed that the software was bad.
All of that was yesterday. NOW TODAY, I uninstalled and reinstalled the software. It's the most up to date software and drivers from the HP Support page. Now, my printer recognizes that the printer is on the network, but won't install the printer. It did the diagnostics, then brought up the screen where it showed my computer on the left, modem in the middle, printer on the right. It gets about halfway through setting it up, then quits and says it can't complete. I ran the scan doctor again and it says that the full software version is not installed. I JUST downloaded it from the website and installed it twice and it won't work. The version I download from the website is around 146mb, but when I download it from the scan doctor page, it's over 200 mb. I run that software and it is exactly the same.
I have tried to set it up via usb. It gets to the 7th of the 8 steps, then it won't go any further. Again, the printer is detected, but it says the appropriate drivers aren't there.
I have tried to set up it's own port using it's USB and a different driver, but that gives me an error. Unable to install printer. Operation could not be completed (error 0x000003eb).)
Would someone please help me, and then if I reply with what it is doing next, please respond?
Please help me get through this. Two days now and I don't have a solution.
Just me, friebe13Hi,
If you are using AT&T wireless router to connect the Photosmart to network, you can refer this link for a solution :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03112838&tmp_task=solveCategory&cc=us&dlc=en&la...
Hope this helps.
Click "Thumbs up" if this helped you in any way.
Its a pleasure talking to you ! Have a Great Day!
I work for HP, but my comments and recommendations here are my PERSONAL views and NOT on behalf of HP. -
appletv won't connect to the internet, but recognizes my wireless network. ip address starts with 169.. somethings not right. never had a problem with appletv and home sharing until the update that required a change in my apple id
An IP address starting with 169 indicates you are not properly connected to your network. Try restarting your router and try to connect again. if the problem persists you may be suffering from interference.
-
MacBook can see wireless network, but can't connect; no error message
This one has got me stumped: my father has a new D-Link wireless router. His Windows laptop connects to it just fine, but neither of our Apple laptops (an old PowerBook G4 and a brand new MacBook Pro) will connect to it. The network does appear in the Airport menu, but when I select it, nothing happens. It pauses for a second, and then I'm left disconnected from all wireless networks. No error message, no connection, no check appears next to the network's name. No security of any kind is enabled, and I've turned off "n" support on the router. I'm at a loss, and can't seem to find anyone with similar problems. Any ideas?
The console gives me the following:
2008/12/27 9:42:40 PM kernel AirPort: Link Down on en1
2008/12/27 9:42:40 PM kernel AirPort: Link Down on en1
2008/12/27 9:42:43 PM kernel Auth result for: xx:xx:xx:xx:xx:xx Not Authenticated
2008/12/27 9:42:43 PM airportd[7585] Error: Apple80211Associate() failed -7
2008/12/27 9:42:43 PM airportd[7585] Error: processcommanddict() failed
2008/12/27 9:42:43 PM SystemUIServer[7514] Error: airportd MIG failed = -7 ((null)) (port = 57487)
2008/12/27 9:42:43 PM SystemUIServer[7514] Error: airportd MIG failed = -7 ((null)) (port = 57487)
2008/12/27 9:42:46 PM kernel Auth result for: xx:xx:xx:xx:xx:xx Authenticated
2008/12/27 9:42:46 PM airportd[7585] Error: Apple80211Associate() failed -7
2008/12/27 9:42:46 PM airportd[7585] Error: processcommanddict() failedI've tried that (every time I've changed the D-link settings, and seperately). No dice,
-
Turned on sharing in iPhoto on my iMac. My MacBook sees all the photos but not all events or albums appear. I have many albums in several folders. Any suggestions?
Hvaing the same problem on my iPad since iTunes and ios5 upgrade - hoping for some updates from Apple to resolve problem - research has shown we are not alone!
-
My iphone 4 sees my printer, but won't connect.
My iphone 4 sees my printer, but won't connect. Connect icon just keeps spinning!
Is your printer supported by airprint:
http://support.apple.com/kb/HT4356 -
hi, I just returned from the Apple Store in Larkspur CA and paired my wireless mouse with one of their computers, but it's won't pair with mine at home. Bluetooth is on and it recognizes the wireless keyboard, see's the wireless mouse but won't pair.
While you are waiting for the new charger, go ahead and reset you SMC:
http://support.apple.com/kb/HT1411 -
G4 (800MHz) connects to airport network via N300 wireless modem but won't bring up a browser page (Safari or Firefox) - so the connection is there, everything says its a goer - I get a clear black signal icon in the menu bar on top, and a clear signal strength in the Internet connect dialogue box - - but when I run either of the browsers, it just says 'not connected to internet' - even for the 'software update'.
the N300 is a Netgear N300 Wirelsess Modem Router (model DGN2200) - ADSL (802.11 b/g/n)tests to try:
-- have you tried connecting by cable? What happens?
-- Set your dns to 8.8.8.8 and 8.8.4.4 This is the google dns server. generally faster.
Check out your settings.
apple > system preferences > network
Double click on network connection you are using.
Pick the TCP/IP tab.
Verify that you have a DNS Server.
You can use
harddrive > applications > utilities > network utility
to diagnose the situation.
You can ping google.com.
Result:
Ping has started ...
PING google.com (64.233.167.99): 56 data bytes
64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=215.362 ms
64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=279.597 ms
64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=189.747 ms
64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=250.657 ms
64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=183.232 ms
64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=243.753 ms
64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=173.108 ms
64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=230.239 ms
64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=180.639 ms
64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=232.177 ms
--- google.com ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max/stddev = 173.108/217.851/279.597/33.615 ms
If that does not work, try pinging 64.233.167.99 Result:
Ping has started ...
PING 64.233.167.99 (64.233.167.99): 56 data bytes
64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=189.655 ms
64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=213.471 ms
64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=257.873 ms
64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=172.745 ms
64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=226.723 ms
64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=171.883 ms
64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=260.308 ms
64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=172.963 ms
64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=198.840 ms
64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=181.215 ms
--- 64.233.167.99 ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max/stddev = 171.883/204.568/260.308/32.247 ms
If pinging 17.254.3.183 works but pinging Google.com doesn't. You have a bad DNS Server address.
I use Google.
Google provides free dns lookup. Their numbers are:
8.8.8.8
8.8.4.4 -
My hotspot won't connect my PC to the internet since I upgraded the op sys on the 4s iphone. The PC sees that hotspot but won't connect. The op sys on the PC is windows 7 ultimate. Can anyone tell me what to do please?
Glad to hear it is all straightened out. You are right about the upgrade cost. That is one reason why Adobe switched to monthly licensing—no more upgrade cost <g, r, & d>. Of course we do have nearly monthly product upgrades. It is almost like playing whack a mole.
-
My new Smart TV recognizes the the wireless address, but won't accept my password....what's going on?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My wireless Apple keyboard won't connect, it just keeps blinking to pair, but nothing connects. I even tried hooking up another wireless I have and it does the same thing. Should I delete it and set it up again?
Hey Apple Health,
Welcome to Apple Support Communities! There's an article that helps to resolve issues with wireless keyboards. I'd take a look at it, go through the troubleshooting steps, and see if that resolves the issue for you:
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048
Best,
David -
I use my computer everyday in our office and have no issue connecting to the internet/wifi, but when my boss comes in and tries to connect it doesn't work. It tells her she has internet, but won't connect to the wifi. We've tried a few different tactics(the basic ones I've seen on here), but nothing seems to be working for us. My computer automatically connects to our wifi.
Just recently the Airport Extreme has started with the blinking amber colored light on the front, which I believe means something is wrong? Can anyone help us figure out what's going on and why we can't get my boss' computer to connect as it should?
Thank you!Here's an update:
Now the light is not blinking. It's a solid, consistant green. I don't know if it helps to narrow it down or anything, but I just figured I'd mention it.
Maybe you are looking for
-
Convert string '1.245.201' to decimal number ?
Hi all, i've a variable like this : DATA g_base TYPE HRPAD_CHAR11 . if g_base equal '100' following instruction work fine : if g_base = 0. endif. Now, if g_base equal '1.434.236', program dump. How can i do to resolve this ? note : it's a standard SA
-
Computer #1 dying - how can I transfer library to computer #2?
Please tell me I don't have to RE-upload my entire library because I had to get a new computer. I tried syncing my ipod nano to my new computer and it said I couldn't dump any songs from the ipod onto my new computer, unless they'd been purchased. I'
-
Hello All , I am entering to SPRO - Cross application component SAP Business Partner - Business Partner Roles - Define BP roles. I can not find some standard roles in this view, foe example: Ship -to , Bill - to as I used to see in previous CRM vers
-
Need Help Endeca Dev to QA build process
Hi, Could someone please guide me on how to move or publish a project from DEV to QA environment, along with the merchansising rules and page_builder_templates? Thanks, Shwetha
-
How to crop an image on a layer?
I am using PSE 6 for Mac. I have dragged an image onto a canvas with three layers. When I crop the image using either the crop tool or a selection>image≥crop, it crops the entire canvas, rather than just the image on the layer. Can this be done? Rela