Macbook shuts down right after update.

IMG_5528.jpeg
I downloaded the last update. When the Mac shut down and restarted to install the update.. The computer shuts down. Not sure what is going on. Hope someone can help
I attempted to add picture

Hi DBolick5,
Thanks for visiting Apple Support Communities.
If your Mac is not starting up after installing an update, first try booting into Safe Mode:
Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
Starting up in Safe Mode
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
Regards,
Jeremy

Similar Messages

  • My 3Gs Shut Down Right After updating

    it and i tried every thing to solve it , Itunes Detect that it is in Recovery Mode , when i Try To restore It give me an error , it dont even power up it dont do any thing please help

    Jailbroken means the software has been modified. If the friend had jailbroken the device, it could be the reason for the error.
    Follow the instructions from the support document. I've copied them here for you
    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
    Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Otherwise try the steps in this support document http://support.apple.com/kb/HT1808. You may have to do this more than once. If the device was jailbroken, it may not be able to be updated. Good luck.

  • Macbook pro 2012 shuts down right after start up!

    macbook pro 2012 shuts down right after start up. I tried the recovery mode but disk doctor cannot repair Mac osX hard drive.This is the second time that I have to format hard drive and install agin all applications. please advise!

    I am not familiar with "disk doctor" but if you used Disk Utility to repair or reformat the hard disk, and it failed again, it is very likely the drive itself needs to be replaced. It cannot be repaired.
    If Disk Utility cannot repair a hard disk it definitely needs replacement.
    All 2012 MacBook Pro models are less than a year old and therefore covered under Apple's standard one year warranty. Have them fix it.

  • Final Cut Express Shuts down right after capturing

    Hello all:
    I am using FCE 3.5. I have used this for about a year now and I have developed a problem with FCE shutting down right after I hit escape. I run a lab for a university and it is doing it on ALL of them so it isn't an isolated incident. I repair permissions, reset the PRAM, trashed the prefs and I don't know what else to do.
    I am running imac G5's using 10.4.11 and the new imacs running leopard. Both sets are doing it.
    Any help would be appreciated since our classes start soon.
    Thank you.

    Can you tie the crashes to a recent event: a software update, a new piece of hardware? What else is connected to the computers?
    (You have, of course, triple-checked that the FCE Easy Setup matches the footage you're capturing, yes?)
    After the program crashes, is the captured footage saved?
    What's the lab setup? Does each student have an individual user account? On each computer?
    Lots of questions, I know...
    Here's a suggestion:
    Use Disk Utility to repair permissions. Create a new admin account on one computer. Set the FCE Scratch Disk to the internal drive. Disconnect everything but the camera. Try to capture. See what happens.

  • Dreamviewer CS5 opens but shuts down right after first view again and again...without no error information

    I have Adobe Premium CS5 for MAC. My Dreamviewer CS5 opens but shuts down right after first view again and again. With no error information.
    I have tried to download it again (web download link) with reopening the computer, but still it does not work.
    Did not ask any serial numbers at all so I assume I was able to "smell" existing program on computer.
    As Dreamviewer is part of bigger package, do i have to install only this program, web design set or what?
    Do I have to download some other programs to get it work? All other graphic and web programs open and work properly.
    What to do? Will it install it again if not uninstalled first?

    For something like this, I would try clearing the program cache first: Deleting a corrupted cache file
    Then restore preferences if the cache trick didn't work: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
    And finally, if neither work, reinstalling using the cleaner tool instructions here: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Macbook shuts down unexpectedly after an hour of use

    I've had my MacBook since 2006, and I've had some minor problems now and then.
    But since few days ago, my mac shuts down unexpectedly after I use it for about an hour.
    at first I thought that maybe it's the fan, cause I've never cleaned the fan since the day I've bought it and my mac gets pretty hot after a while. but it used to work just fine when it got even hotter.
    now I'm guessing maybe it's the battery? I've also never replaced the battery to a new one, cause I've almost always used power adapter instead of using battery alone. but I think I've heard it somewhere that the battery still dies even when you only use power adapter. is this true?
    I usually just turn mac right back on when it shuts down, and it goes well for about 30 mins and then it shuts down again.
    could anyone please be kind enough to tell me if it is the battery that's causing this such a frustrating problem? I don't know if this would help figure out the problem, but this is what battery info says,
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 3674
    Remaining Capacity (mAh): 3648
    Amperage (mA): 0
    Voltage (mV): 12443
    Cycle Count: 105

    Thank you so much for answering! I've actually read your answer to other similar forum, and have just installed iStatPro. it says that my fan is "exhaust" and at 0rpm. do i HAVE to replace the fan to a new one? can I just open up my mac and clean out the fan? if so, would you recommend this instead of buying a new fan? one last thing, if I buy a new fan, is it easy for me to replace it by myself? again, thank you so much for your answer.

  • Lumia 1020 shutting down automatically after updat...

    i have updated my lumia 1020 to latest 8.1 OS and it has a problem it shuts down automaticcally after about 6 hours then i check my phones IMS is nott registered....any suggestion please reply me
    Moderator's note: The subject was amended as the post was moved to the most appropriate board. 

    @arsal875 Hi. Welcome to the Nokia Support Discussions.
    Nokia cannot support software that it does not have available on its devices. We suggest reaching out to: Windows Phone Preview for Developer Support for further assistance. Thanks for your understanding.

  • PS5.1 shuts down right after opening file.

    PS shutss down right after opening jpeg and other files.  Win7 32bit....  What gives?

    Most likely a bad font.  Do you have any 3rd party fonts?
    Also could be driver for video card, printer, scanner.
    If these are all OK check your Event Log (see OS help)

  • Used safe start to try and fix issues with safari on MacBook Pro but it shuts down right after it stops. What can I do.

    Safari kept shutting down and someone suggested trying a safe start to correct issue. All this did was create a new oils sue as my MacBook Pro OS X 10.9.1 system only begins the safe start within lay a small portion of the bar filling and then shuts down. Now I cannot even get back to my regular screen.

    artbyval,
    what is an “oils sue”?
    Have you tried booting into your recovery partition? To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilites menu, from which Disk Utility can be selected. In Disk Utility, select the disk that your MacBook Pro boots from (typically named “Macintosh HD”). Once the disk is selected, press the “Verify Disk” button; if it shows problems, press the “Repair Disk” button. Once the verification/repair is complete, restart normally, to see if you can login as normal. Once you can log in again, see if Safari still has the same problem with shutting down.

  • MacBook shuts down abruptly after some time, then has problems starting

    I have 13" MacBook that I'm having some problems with. I have OS X and Windows XP in a dual boot configuration, and the problem happens in either OS. I can only use the computer for anything from 3 to 30 minutes before it suddenly shuts down.
    When this first happens, I get trouble restarting it. It often just comes as far as intialising the DVD-ROM (you hear the sound), then it shuts off again. It can take up to ten starts before it powers up again. And then it's just a matter of time before the whole thing starts again. This happens regardless if I have the charger connected or not, or if I use just the charger and remove the battery.
    At first it was thought that the battery was faulty, and I received a new one last spring. However, the problem quickly returned, and I haven't bother to do anything more about it before now. Suffice to say, I miss using my shiny MacBook, and I hope that someone can point me out in the right direction. As the computer is 2 years this may, I doubt I can get it repaired for free on the warranty(?).
    Long post, but I hope I've explained the problem thourough enough. I believe I did the SMC reset and software update last summer, though I'm not sure which revision I'm on. If there's any more information I can provide, please let me know. It just takes some time to get the computer to stay on long enough to check stuff

    Thank you so much for answering! I've actually read your answer to other similar forum, and have just installed iStatPro. it says that my fan is "exhaust" and at 0rpm. do i HAVE to replace the fan to a new one? can I just open up my mac and clean out the fan? if so, would you recommend this instead of buying a new fan? one last thing, if I buy a new fan, is it easy for me to replace it by myself? again, thank you so much for your answer.

  • Mbp shut down twice after updating to Yosemite

    since the yosemite update from mavericks, my macbook pro 15" mid 2010 has been shutting down and rebooting by itself. at the pw login page before the os being loaded, soon it shuts down and reboots once again before the os can be loaded. (which means rebooting twice in a roll)
    this situation has been happening like 3 times today. and its been happening like once everyday.

    since the yosemite update from mavericks, my macbook pro 15" mid 2010 has been shutting down and rebooting by itself. at the pw login page before the os being loaded, soon it shuts down and reboots once again before the os can be loaded. (which means rebooting twice in a roll)
    this situation has been happening like 3 times today. and its been happening like once everyday.

  • MacBook Shuts Down Unexpectedly After Inserting DVD

    I was about to watch my new TRANSFORMERS movie on DVD and after about 3 minutes of watching, my MacBook just shuts down immediately, so i tried the second time. This time, i was plugging in my ipod to recharge while the movie was paused. Once i got back and started to play my movie, the whole screen turned black (but the movie was still playing), and it shuts down again. Can anyone please tell me why??

    I have JUST started experiencing the same problems where I'll insert a DVD and the computer may or +may not+ shut down unexpectedly in the middle of playing. When I try to restart with the dvd still in the laptop, it may also shut down again before I can successfully log in. This has also happened with several different DVDs over the last 4 days, so I don't think it's tied to the DVD itself...
    I also have the computer on, plugged in, with the battery taken out, and with an external harddrive and mouse plugged in. Are the peripherals making it worse?
    I bought my macbook in the US with a 3 year applecare plan and am now living in Beijing, China. I would like to be able to get this issue fixed, but don't know where to begin with calling a place in China. What is the protocol?

  • My macbook shuts down automatically after 30 seconds of inactivity

    after immediately start up, maybe less than 30 seconds, the menu comes up asking if i want to restart/shutdown/sleep/cancel and if i don't cancel immediately the computer shuts down.
    if i cancel, the menu shows up after about 30 seconds.
    i have checked the energy saver prefs and everythign is set at 15 min.

    Update: I found the problem in similar posts. Once I inserted the headphones completely in (no metal showing), the problem was resolved.

  • Mac book shuts down right after start up

    my macbook shuts off after initial start up

    Assuming no issues with power adapter or power source, do an SMC and PRAM reset. If those don't work, take it in to Apple for service.
    SMC:
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    PRAM:
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Photoshop CS6 & CC shuts down right after startup

    Hello!
    I've just got my self new lisence for adobe Lightroom, PS CC & CS6. Previously I had just PS CS5. Problem is that I can't get PS CS6 nor PS CC to start up, or more accurately to stay on more than one second. Now I'm asking help to get just the CS6 to work, as when that problem is solved, I believe also the CC -problem is solved too, as the problem is excatly the same. Lightroom works fine.
    What happens when I now start up CS6; everything loads just fine, no errors or anything that is abnormal. At first time when I started CS6, I got a warning message (this is a translation from finnish to english so it might not be to the letter): "photoshop detected graphic cards that are not officially supported. If there are problems, remove the selection from settings, performance settings - use graphics processor". I haven't seen this message later (except when I tried CS6 with different windows account).
    When cs6 (or cc) is started there's time about one second to open a menu window, when a window is succesfully opened the program stays on, and I can use any menu window that I want, and I can change any options. Right after menus are closed, the program closes. Mysterious. But, because of that, I'm able to go to the "performance settings" and try different selections - I've tried deselect the "use GPU", and I've tried to use all of the advanced settings (basic, normal, advanced), but the "USE OPENCL" choise is allways grayed out, and i'm not able to select that. Also cs6 detects my gpu right.
    I thing this has something to do with GPU as the above message says, I just don't know what to try anymore.
    Now what have I tried and what's done (using admin rights):
    - updated both nvidia gpu drivers (three different drivers been tried) and intell drivers
    - installation and removing
    - removed ps cs5
    - used adobe cleaning tool
    - used two differend registry cleaning tools (cc cleaner / wise cleaner) before installations
    - used shift when starting
    - disabled the gpu sniffer
    - tried logging out from creative cloud
    - deleted FNTCACHE.DAT from /system32
    - Tried different 3d settings from NVidia control panel only for the photoshop.exe (tried forcing Nvidia GPU, tried different cuda GPU settings
    Using:
    Asus 13,3" i5-2430m, 4gb ram, NVidia Geforce GT 520M, 1gb + intel hd graphics 3000
    Operating System: Windows 7 64-bit (finnish language)
    Adobe system information (most translated to english):
    Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 2394 MHz
    Built-in memory: 4001 MB
    Free memory: 1798 MB
    Memory available to Photoshop: 3367 MB
    Memory used by Photoshop: 71 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL-draw: Available
    OpenGL-piirtotila: normal
    OpenGL, normaalitilan salliminen: True
    OpenGL, lisäasetusten salliminen: True.
    OpenGL, allow old GPU's: Not detected
    OpenCL Not available
    OpenGL-versio: 2.1
    Videon nelikulmaisen kuvion koko: 16384
    OpenGL-muisti: 1024 Mt
    DisplayCard vendor: NVIDIA Corporation
    DisplayCard : GeForce GT 520M/PCIe/SSE2
    Display: 1
    display limits: ylä= 0, vasen= 0, ala= 768, oikea= 1366
    Displaycard number: 2
    Displaycard: Intel(R) HD Graphics Family
    Driver version: 8.15.10.2291
    Driver Date: 20110127000000.000000-000
    Displaycard Drivers: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
    Display: 1366 x 768 x 4294967296 colors
    Displaycard name: Intel(R) HD Graphics Family
    Displaycard memory: 1809 Mt
    Displaycard number: 1
    Displaycard: NVIDIA GeForce GT 520M   
    Driver version: 9.18.13.3489
    Driver date: 20140208000000.000000-000
    Displaycard Drivers: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    display:
    Displaycard: NVIDIA GeForce GT 520M   
    Displaycard memory: 1024 Mt
    serialnumber: 96040830714407508674
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\ANNE-M~1\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
    C:\, 279,5G, 123,3G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set

    Hi!
    Win 7 64bit, tried in safemode with networking enabled, no help, same issue.
    One funny thing more, I opened a pdf -file through explorer in cc and it asked me if i wanted to save the changes before closing application. I couldn't do anything for the pdf file, except to save it. ;]
    What I want to say is, CC (or CS6) is not crashing, it's closing itself.
    - K

Maybe you are looking for