Macbook start up problem

Hi,
yesterday I was serving the net using Safari and everything works fine,after that I put my Macbook to sleep as usual (I usually don't shut down)
few hours later I when I try to wake it up and the screen just went black, no screen light, totally black, the LED light is on but doesnt blink as usual (it keeps on)
the machine vibrate but no response.
I forced shut down, restart and everything remains the same.
I also tried Command + Control + R + P and nothing happen.
anyone experience similar problem?
what can I do?
thanks.

your model supports up to 4GB of RAM (2X2GB) so you're highest option would be to buy a single 2.0GB chip and install it in the functional slot.
I am an Apple Authorized Technician and have seen this numerous times in the past, so you are definitely not an isolated incident.
Here is a link to a very popular store to buy apple-compatible parts:
http://eshop.macsales.com/shop/memory/MacBook/DDR2/
for $35 and about 5 minutes of your time it is probably the best thing you can do for your computer. Sure you won't have dual channel memory speed, but when you compare $35 for a RAM chip vs. $1000+ for a new macbook, it's pretty easy to decide. Throw the 2GB in, use it for another 2 years and then decide if it's time to replace the computer.

Similar Messages

  • Macbook start up problems

    My MacBook popped up with a restart screen the day and after restarting it I was able to use it once and than it would no longer turn on but would do an SOS type beep or a folder with a blinking ? in it. I was able to force start the Mac OS X startup and that work. I ran the Disc Utility to find out what happened and it came back with this information: Verify permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
    Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.
    ACL found but not expected on "Applications/Utilities".
    I was wondering if anyone could tell me what this means, so that I can take the appropriate action to assuring that my mac book works properly?

    Megatronwill wrote:
    My MacBook popped up with a restart screen the day and after restarting it I was able to use it once and than it would no longer turn on but would do an SOS type beep or a folder with a blinking ? in it. I was able to force start the Mac OS X startup and that work. I ran the Disc Utility to find out what happened and it came back with this information: Verify permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    (snip)
    I was wondering if anyone could tell me what this means, so that I can take the appropriate action to assuring that my mac book works properly?
    Welcome to Apple's discussion groups.
    You can ignore those messages: http://support.apple.com/kb/TS1448
    I'd use Disk Utility to do a "verify disk" operation. If it reports problems, reboot your Mac to a "shift" key held down to boot into "safe mode", which runs a "repair disk" operation, then reboot normally.

  • Upgraded to 10.8.3 and now having start up problems on MacBook Pro.  Help?

    Upgraded to 10.8.3 and now having start up problems on MacBook Pro.  Help?

    Please elaborate. What do you mean by "start up problems" ? How far does it get?
    Chime? Fans? gray screen? Dark Apple? spinner? spinner spins for usual amount of time and screen goes dark? question mark? tones? flashing power light? smoke? what?

  • Start up problems, including from installation disc.

    Hello everyone in the Apple ether, I need your help!
    I have a powerpc based iMac G5 at home that I set up for my mum to use once I bought my macbook. I finally managed to win her over with talks of how much easier it would be for her to manage her photos in iPhoto, and everything was going really well. I recently came home after my final year at uni and some travelling to find that the computer is taking a long time to start up. This can be in both the grey apple loading screen but also once it logs in it can take a long time to display anything over than the desktop background, and even once it displays other items any attempt to open anything just results in a spinning wheel icon. At the worst case it has taken about 20 minutes to get going.
    Once it has fully booted, the machine doesn't appear to be working any slower than normal. I tried using disk utility in mac OSX and verifying permissions etc and that didn't do anything. I then tried googling the problem and came across this article on the apple web site. http://support.apple.com/kb/TS1417
    Starting in Safe Mode did not resolve the issue so after backing everything up I tried starting from the installation disc. This is not something I have ever done before and as someone that never really delves beneath the surface of her machines I was a bit scared of doing it. But I put the disc in and restarted and held down C just after I heard the chime, and shortly after it all went wrong. The screen went grey and all I could see was the image you get when it crashes (you know, the power sign with text over it saying you need to restart) with lines of code all down the left of the screen. I took a photo of the screen on my camera so can give details of the code if you need them. The last line said
    Kernel version:
    Darwin Kernel Version 8.8.3: Wed Oct 18 22:00:38 PDT 2006; root:xnu-792.15.4.obj-4/RELEASE_PPC
    panic: We are hanging here...
    After a few minutes on this screen the fan started working overtime and after about 5 minutes of that I just turned it off using the power button on the back. The machine has since started up normally (ie slowly) but is working fine.
    So I was wondering if anyone had any ideas how to fix the slow start up problem without booting from my install disc, or indeed if anyone could suggest why I can't boot from my install disc? Thanks very much for your time and help.

    It appears you experienced a kernel panic which is hardware related. A few suggestions for you to try:
    Except for the keyboard & mouse, disconnect all devices from the computer & try the suggestions mentioned in the following:
    http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or *kernel panic* when computer starts
    User Tips: Kernel Panics
    ==============
    Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose *"Disk Utility"* from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the *"repair disk"* button in the right hand section of the window.
    Once this process has been completed restart your computer and run *repair permissions* from Disk Utility.
    * If Disk Utility (from the install DVD or HD)is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
    =============
    How much HD space is left on the iMac?
    How much RAM is installed?
    ==============
    Which "model" & "generation" G5 iMac does your mother have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
    You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
    Thank you

  • Why does my MacBook start typing in upper case even though Caps lock is off?

    On occasions, when typing, my MacBook starts to type in upper case even though the Caps lock is off? This is not a physical sticking of the shift key as it happens even when using a USB keyboard? I have to use the shift key kind of in reverse to revert to lowercase entry.
    I have checked settings and I cannot find anything that could be causing it.
    Really bloody annoying!
    Can anybody help.
    I have a two week old MBP w Retina Display. This did happen on my old MBP and I did restore this new MBP from my Time Capsule disk so assume I brought the problem with me so to speak.

    Do you have "sticky keys" turned on under Accessibility by accident?

  • Macbook Pro Usb problems

    I have a Macbook Pro, and I recently started having problems with the usb ports. I run some midi equipment off of them and I have a usb hub that I connect in as well. And recently the usb port closer to the lighting port wont connect with any mice and with any of my controllers. Both ports charge my ipod but I cant get any usb hubs to work in the top on (closer to the lighting port)
    Help?

    Try an SMC reset.
    http://support.apple.com/kb/ht3964

  • MacBook Pro Boot Problems Yet Again

    Earlier last month, I posted a topic about how my Macbook Pro "crashed" and I ended up having to reformat my HD and it was working fine afterwards as long as I didn't install any OS X updates.
    Just yesterday my Macbook started to just randomly freeze every two seconds when I went to open something, or type a simple word, or just when it started up & loaded the desktop period.
    I ran the disk utility to try to verify/repair the disk and that did not work, I kept receiving the message "disk cannot be repaired, please backup, reformat and restore, blah blah" ...
    PROBLEM IS.
    Now when I turn it on, it always wants to boot in safe mode, but as the little bar is loading, it shuts the entire computer off before it even finishes loading (it starts to load and about less than a min later it shuts off). It happens EVERY TIME I turn my Mac on. What is the problem? Does AppleCare cover this? I've only had my Mac less than a year and already I'm experiencing problems that I shouldn't be having AT ALL.
    I don't live close to an apple store, and I'm in college, so I can't just up and drive hours away to find a store.
    I have an iPhone 4 and iPod Touch 4th Generation now I'm afraid to even sync it with the Mac when it is fixed because I don't want to lose everything.

    Look at these data recovery tools if you aren't backed up:
    http://www.macmaps.com/backup.html#RECOVER
    Purchase AppleCare if you haven't already.  You can do so anytime in the first year.
    AppleCare by phone can usually with notebooks setup a mailin to repair with as little as 36 hour turn around in the U.S.    The issue you are having may actually be a dying hard drive, or it may just need purchasing Alsoft Disk Warrior, or it may be a power supply issue or RAM issue.  As long as it is Apple installed RAM, that's normally covered under warranty if nothing was dropped or damaged by bumping.  Same with power supply.  A bad power supply in the room can cause power supplies on computers to fail.  A good APC surge protector can help protect a computer against spikes and surges not caused by lightning and some poor power.  Other poor power has to be diagnosed by an electrician. Good luck!

  • My MacBook Air has problems connecting to a saved network when I first open it.

    My MacBook Air has problems connecting to a saved network when I first open it. When it idles, the connection gets lost and even clicking on the network won't connect it. Then I have to turn off wireless and turn it back on for it to connect. My boyfriend's MacBook Pro does not have this same problem and this problem started maybe 2 months ago and nothing about our internet or router has changed, and its only my computer having the problem. Its a 2013 MacBook Air and my softward is: OS X 10.9.1 (13B42). Please help!

    Hello, nheredia05. 
    Thank you for visiting Apple Support Communities. 
    There are a couple steps that I could recommend trying.  Power cycle the router and test to see if the behavior persists.  Next, try an remove this prefered network from your list and then add it back again.  Make sure all firmware updates have been processed on the router side and the settings have been optimized for performance.  If the issue still persists try the steps in the second article.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    About Wireless Diagnostics
    http://support.apple.com/kb/HT5606
    Cheers,
    Jason H. 

  • MacBook starts with a long PEEP an only after 4. push the Power Button

    hi,
    something ist wrong with my MacBook.
    It starts only after 4. push the PowerButton.
    one peep means - RAM ist not installed, but it is and i changed it too - no results.
    What kind of promlem is it????
    MacBook works wthout problem ofter start. but why peeps it???
    any idea?

    http://www.computerhope.com/beep.htm
    Bring it to an Apple store or AASP.

  • My Macbook starts up, shows the screen saver, then immediately goes to sleep. I tap the spacebar, it comes back for a second, shows the tool bar and the hard drive icon then immediately "goes to sleep".  This can go on forever, on, sleep, on, sleep.

    My Macbook starts up, shows the screen saver, then immediately goes to sleep. I tap the spacebar, it comes back for a second, shows the tool bar and the hard drive icon then immediately "goes to sleep".  This can go on forever, on, sleep, on, sleep. I can only see the screen for maybe 3-5 seconds; not enough time to do anything. Someone did step on it, so I don't know if the problem is with screen or ??
    Thanks!

    Hello, Juniorjr2. 
    Thank you for visiting Apple Support Communities.
    This sounds like screen curtain may be enabled.  Screen curtain is a feature that allows display privacy.  To disable screen curtain while VoiceOver is enabled, you can three finger triple tap the screen to disable this feature.  You may need to press the home button once in order to process these steps.  If you wish to disable VoiceOver, see the link in the article below.
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    If the issue persists, try reaching out to us here. 
    Cheers,
    Jason H. 

  • Has your Macbook Air overheating problems been solved?

    Hi All,
    Has there been a solution to the Macbook Air overheating problem for you?
    I'm considering selling my MBA but want to see first if there has been any new updates on this issue.
    I have a Macbook Air with the specifications as follows:
    Model: MacBook Air 1.6GHz Intel Core 2 Duo
    Production year: 2008
    Production week: 15 (April)
    OS X Version 10.5.7
    Have had the computer for about a year now and it has been constantly overheating and becoming more or less unusable when doing so. Have been hoping upgrades to the software would solve this eventually but that does not seem to have happened.
    As I'm writing this room temperature is about 20 degrees celcius. Laptop sits on a table with power cable plugged in. Not running any external screen. There is no video streaming or music playing. Only the Firefox browser and a few more idle apps are active such as Mail and Skype (in the background). Even under these conditions the fan is currently running loud at 6100rpm and the Macbook Air is very hot underneath.
    CPU temperature is currently 54 degrees Celsius. Both cores seem to be active.
    Now, as an experiment I will head over to YouTube to watch a video and open up Microsoft Word in the background, a perfectly normal usage for a computer this new. This is what happens:
    The computer starts to become painfully slow. After for example clicking an item in the browser there is a 1-3 second delay before the click actually becomes effective. It's now so hot underneath that I would not want to keep it in my lap. It is hard to use the mouse pointer properly as it does not update in realtime, I have to assume where it will land based on my movements. When scrolling, the spinning wheel icon becomes active. Everything is now happening in slow motion.
    Video is lagging heavily. I can only see probably 1 out of every 10 frames or less of the video. All applications running are very slow. CPU temperature is now 64 degrees celsius. Fan is at 6200. Computer is now unusable for me. When I scroll a page in the browser it takes about 2-3 seconds before anything happens. Changing tabs takes 5-6 seconds after I click them. I will have to shut it down before re-starting and resuming work. When room temperature is even higher on a hot day needless to say everything gets a lot worse quicker.
    Is this normal for Macbook Air's? If that is the case they are more or less unusable for most types of normal 2009 year usage (video, audio, browsing, office work etc).
    What solutions have you found? Coolbook? Software/Firmware updates? Hardware changes? Please let me know if you have been able to make your MBA not overheat under normal usage.

    Hi Everybody,
    Thanks for your replies to start with.
    I have tried to install Coolbook now and has it running. When using 'throttling' and letting it change CPU speeds (I think..) the problem still remains. When watching a video or other demanding task the temperature goes way up. Running a CPUTest (small or big) gets CPU temperatures of up to 84-85 C. Fan of course at 6200rpm all the time.
    Right now, I have Coolbook set to 800Mhz and 0.9V. Apps running are Firefox, Skype, Mail and iTunes with no audio playing. CPU temperature at 56 c and fan speed (as usual) at 6200rpm. I can use the computer now. It is still lagging and not very fast at all. Sometimes text appear 1-2 seconds after I have written it on the keyboard.
    So Coolbook has made a difference for me, but only when putting the CPU speed down to 800MHz. I wouldn't call reducing the CPU speed to half a 'solution' though and will not keep that as a long term solution. Reducing voltages for higher CPU-speeds 0.9875V for 1600MHz does not work, it still heats up massively.
    Have used the MBA for the whole day today and can't recall a single time the fan has not been around 6200rpm except right after boot.
    Thanks for the tips on upgrading to 10.5.8. I will try that right away and let you know how it works out.
    Have also considered buying some cooling device but just as you say that feels like a bit of a last thing to resort to.
    I'm surprised Apple hasn't responded stronger to this. Had this happened in the car industry we would have seen thousands of cars being sent back to the garage to be fixed.
    If this only has to do with some specific production weeks then the right thing to do would be for Apple to let those people have their computers either fixed or replaced.

  • Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

    I started getting start-up problems with my hp pavilion dv6t-7000‏.  It happens intermittently. 
    The boot error is:
       Boot Device Not Found
       Please install an operating system on your hard disk.
       Hard Disk (3F0)
       F2 System Diagnostics
       For more information, please visit: www.hp.com/go/techcenter/startup
    Could a faulty BIOS update cause this problem?
    Anyone else who may have experienced a similar problem?
    I'd appreciate any help about this problem.  Thanks.

    Hi
    Please find the link given below might help you to fix your issue.
    Resolve Boot Device not Found Error Message
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • I had an iphone 4 and when I downloaded the IOS7 started having problems. Gone the phone keypad, could not type more names of my contacts in the phone search. I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of yo

    I had an iphone 4 and when I downloaded the IOS7 started having problems. Gone the phone keypad, could not type more names of my contacts in the phone search. I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of your phone contacts it takes to open or write

    dedegodoy wrote:
    I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of your phone contacts it takes to open or write
    What does that mean? What is your technical support question?

  • I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth

    I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks

    How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
    If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions?

Maybe you are looking for

  • How Can i create a package/trigger

    Hi Every1, I want to create a database trigger which act on entering the charahters and count the characters. e.g you can understand with the example if i press 01 in a specific column the length of characters is two after this automatically the char

  • How to assign a Sales Org and Product group

    all the config have been maintained (creating the hierarchies/categories, assign the set types to categories etc.) under IMG->Cross-Application Components->SAP Product. Also assigned the set type for sales data/product group for category MAT_DIEN. Bu

  • Powerbook purchased in 2003 has no airport card?

    The manual says my powerbook is equipped with AirPort Extreme wireless technology, but system profiler says, "no information found" about the AirPort card. I never tried to connect to a wireless lan until I tried today and nothing happened – no autom

  • Show image when cursor hovers over image

    I would like to have the "i" image used to flip to the information screen be hidden or invisible unless the user hovers over the image, where I want the image to be visible and active after a second or two delay. This will allow a click or touch in t

  • For the Attribute Movement type(BWA) we use Value " 201" and not "101" why?

    Hello Experts, We are in SRM 7.0 classic scenario, For the Attribute Movement type(BWA) we use Value " 201" and not "101" and provide the Source syst(backend R/3) Can you all plz help me understand what is the difference if use value "101" for the  A