MacBook starts with a long PEEP an only after 4. push the Power Button
hi,
something ist wrong with my MacBook.
It starts only after 4. push the PowerButton.
one peep means - RAM ist not installed, but it is and i changed it too - no results.
What kind of promlem is it????
MacBook works wthout problem ofter start. but why peeps it???
any idea?
http://www.computerhope.com/beep.htm
Bring it to an Apple store or AASP.
Similar Messages
-
My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.
Now that you mentioned it, that might be the source of the problem. Something was definitely wrong with my graphics card before the incident happened. You mean that particular batch of graphics cards had some inherent issues, right? I went to the genius bar, and the 'genius' there, without trying to diagnose the problem properly, just adviced me to buy a new mbp! He said Apple will no longer try to fix or touch macs older than 5 yrs. Mine is 5.5 yrs old...
-
My macbook doesn't work. After pressing down the power button I hear the sound from starting the apple symbol appears and after a while a sign prohibited appears on the place of the apple symbol
Hi Kappy Thanks for your answer. I did a reboot on my Macbook as suggested and this operation is going on non stop for 14 hours and on the screen always appears the same message that you can see in the picture in attachment. Any ideas?
-
Hi, ı have a problem once I push the power button and it starts to opening but small symbol turning and turning, it really lasts so long. could you please help me? is it so slow to open a mac pro.
OS X Version Number?
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836 -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it. I've tried different power plugs. Going direct into the wall, through a power strip. By iteslf, with other devices plugged in. I removed hard drives, and some RAM, and nothing. Sometimes it would not turn on, and then some minutes later it works. So its was sparatic, but now its been the same situation for three days where it wont turn on.
I'm guessing power supply, but I wanted to see if anyone had a similar expereince and what the solution was, before I drag this beast to my local Apple store and have them look at it. Its a real pain to get it there and back and I want to be armed with some info for them. I already dragged this to them when it first started to do this, and of course it started up just fine for them. And you know if it works for the Genius then theres nothing wrong with. No matter what you explain to them.
I figure if anyone had a the same problem and was able to resolve it, I can relate that experience to the Genius even if it start up for them.
ThanksTry a SMC Reset using the extended method:
Remove the AC power cord.
Press the power-on button. [This drains the stored charge from the power supply]
wait a quarter minute.
Restore the power cord, being certain to JAM it into the socket, as the big block of rubber inhibits proper seating.
wait a quarter minute
attempt to power on.
If no joy, examine the button battery half-hidden behind the graphics card. Remove it to measure the Voltage. A new battery should not cost over US$5, and measures a little over 3 Volts. BR-2032 is used in garage door opener controls and car door locks controls. The geeks at Radio Shack can measure it for you. -
I have an iPhone 3GS and it recently started to make a Cicada type of sound when pushing the close button on the top right hand of the phone. Can anybody give me feedback on what this is or how I might be able to fix it?
It will be replaced with the exact same model. It is not expensive compared to the full retail price of a new phone (without carrier subsidies).
If you're eligible for an upgrade from your carrier, now might be a good time to consider upgrading to an iPhone 5, though. -
How tu turn of sleep mode after pushing the power button on earlier macbook
hi,
ive installed mavericks on my macbook pro 2011. with mountain lion or older macbook versions, pushing the power button brought the menu tu turn of the computer. now with mavericks, it puts my macbook in sleep mode.
is there a way to turn that off?
thanks for your help,
peterIf you want to see the shut down dialog like previous OS, press and hold the power button for 1.5 seconds.
http://support.apple.com/kb/PH13962 -
My Mac won't fully start up.. I push the power button, the apple sign pops up and the loading circle and then a bar loading and as soon as the bar is done loading the computer cuts off again. It's like it attempts to start up like it's updating something and then after the bar is full, it shuts off. Please help
Hpullen wrote:
A1278 and I'm not sure about the OSX
http://support.apple.com/kb/HT4132 How to identify MacBook Pro models
http://support.apple.com/kb/HT1159 Mac OS X versions (builds) for computers -
i accidentally pushed the power button of my macbookpro... it restarted but doesnt open... what appears now is a flashing FOLDER logo with a QUESTION MARK on it.. can someboby help me to fix this?
(Assuming you don't have a firmware boot lock set)
First easy step...
1. Shut down the computer if it's on (hold the power button down... until it shuts off)
2. Press the power button
3. Immediately press AND hold the Option key ASAP
Hold until drive option images appear in a single row across the screen. Typically most people running 10.7 or 10.8 will see 2 drive options to boot from: the main volume they usually boot from, and a recovery volume. If your main volume pops up. Use the cursor or arrow keys to highlight/select the main volume and press enter. That should boot your main volume. Let me know what you get from this point... I'll give you more as you go along. -
yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd
Are the lines like psychedelic herringbone? If yes, I had that happen once, it was something serious, like the
Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP. I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
Good luck and don't panic. -
Any help!!!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider. -
I have a MacBook. It went to sleep and I could not wake it up. I shut it off by holding the power button so it shut off. Now I can't get it to start at all.
Julie...
It went to sleep and I could not wake it up
Try Resetting the System Management Controller (SMC) -
I have a problem with my MacBook Pro, I pressed the power button and after that the apple noise came and the screen turned blue. What can I do and what happened? pls help & thx btw
You may find this helpful:
http://support.apple.com/kb/PH14061
Ciao. -
My MacBook Pro won't start it just goes beep beep beep when I press the power button
My MacBook Pro won't start it just goes beep beep beep when I press the power button
Hi Csound1,
I haven't added any RAM my daughter was using the computer then it hung so powered it down then the beeping started. Do you know if there is a combination of buttons I can press when powering up that will put me in some kind of safe mode so that I can find out what's up, I tried pressing D when the beeping started but it didn't make a difference.
MC
Maybe you are looking for
-
TimeZoneSupport messed up all my appointment times - how do I fix it?
All of my appointments have had their time changed and I am urgently seeking help to return them to their correct times. I have 3 devices: Apple MacBook Pro (mid 2009) running the latest version of Snow Leopard iPad 2 running iOS 4.3.5 iPhone 3GS run
-
I have my phone protected under the Geek Squad replacement warranty. In order to send your phone in, you need to turn off Find My iPhone. Since my screen was broken to the point where it couldn't be used, I had to use iCloud.com. The verification ema
-
Multiple FFT's for 2 sec of sampling
hi, i have an input signal that i am trying to do around 16 separate 1024 point FFT's so i could get around 2 seconds of sampling(8k samples per sec). there would be two output arrays, one complex and one real. can anyone help me do this and would t
-
Hi I'm new to this forum and an absolute beginner so please bear with me. I would like to ask if anybody has a solution to the following problem. I am working with Adobe Premier Elements 9 on a 2010 iMac running Mac OSX 10.6.8. I always have a proble
-
Requesting permanent license in SMP - Xcelsius 2008
Hi, I am not able to get into the right path to apply permanent license for Xcelsius 2008 product. I have installed the application using the temporary license I got from the excel link available in SMP. Do I need to provide any "SID" to request lice