MacBook suddenly became very slow. Have tried other posters' suggestions.
Hi there,
My MacBook recently, rather unexpectedly, started running very slow. There is no particular application that is running slowly, but rather, the system as a whole. I think the problem began while I was browsing the internet and doing nothing suspicious in particular. I have been doing a bit of reading on these threads, but have been unable to solve my problem so far. I have presented below what I have tried so far.
Very many thanks for your help,
Aaron
1) Reset my System Management Controller.
2) Repaired my Disk using Disk Utility in Recovery mode.
3) Backed up my computer.
4) Using instructions outlined by user ‘Linc Davis’ in thread https://discussions.apple.com/thread/5437363?tstart=0. I will post the results as a comment below this question.
(apologies for the long log list… I included about 50 lines as suggested)
Results from Diagnostic Procedure using “Terminal”
Mar 25 10:35:33 aaronscomputer2 kernel[0] <Debug>: nspace-handler-unblock: did not find token 320
Mar 25 19:36:00 aaronscomputer2 kernel[0] <Debug>: nspace-handler-unblock: did not find token 1360
Mar 31 00:58:28 aaronscomputer2 kernel[0] <Debug>: nspace-handler-update: did not find token 25548
--- last message repeated 2 times ---
Mar 31 00:58:48 aaronscomputer2 kernel[0] <Debug>: nspace-handler-unblock: did not find token 25548
Mar 31 01:01:45 aaronscomputer2 kernel[0] <Debug>: nspace-handler-unblock: did not find token 25605
Mar 31 08:29:08 aaronscomputer2 kernel[0] <Debug>: nspace-handler-unblock: did not find token 919
“Activity Monitor”
- % CPU (highest) = WindowServer (2.5%), although this varies greatly and is never exceedingly high.
- % User = 1.93%
- % System = 1.66%
- % Idle = 96.60%
- Memory (highest) = kernel_task (785.7MB)
- Memory Used = 5.11 GB / 8.00 GB.
- Memory Page Outs = I don’t see this statistic.
- Memory Swap Used = 0 bytes.
- Reads in/sec = 15
- Writes out/sec = 2
Log List from “Console”
2014-03-31 2:11:33.000 PM kernel[0]: nspace-handler-set-snapshot-time: 1396296695
2014-03-31 2:11:33.445 PM com.apple.mtmd[37]: Set snapshot time: 2014-03-31 14:11:35 -0600 (current time: 2014-03-31 14:11:33 -0600)
2014-03-31 2:12:19.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=497[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2014-03-31 2:12:26.862 PM GoogleSoftwareUpdateDaemon[498]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
2014-03-31 2:12:26.872 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
2014-03-31 2:12:27.467 PM GoogleSoftwareUpdateDaemon[498]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
2014-03-31 2:12:28.569 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x383790
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x383c70 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2011-07-04 16:55:56
>
Using server: <KSOmahaServer:0x2085310
engine=<KSDaemonUpdateEngine:0x379570>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.GmailNotifier" = {
LastRollCallPingDate = 2011-01-14 08:00:01 +0000;
"com.google.Chrome" = {
LastActiveDate = 2014-03-16 20:40:48 +0000;
LastActivePingDate = 2014-03-17 07:00:00 +0000;
LastRollCallPingDate = 2014-03-31 07:00:01 +0000;
"com.google.GoogleDrive" = {
LastActiveDate = 2014-02-13 18:22:12 +0000;
LastActivePingDate = 2014-02-14 08:00:06 +0000;
LastRollCallPingDate = 2014-03-31 07:00:01 +0000;
"com.Google.GoogleEarthPlugin.intel" = {
LastRollCallPingDate = 2014-03-31 07:00:01 +0000;
"com.google.Keystone" = {
LastActiveDate = 2014-03-31 20:12:25 +0000;
LastActivePingDate = 2014-03-31 07:00:01 +0000;
LastRollCallPingDate = 2014-03-31 07:00:01 +0000;
"com.Google.GoogleEarthPlus" = {
LastRollCallPingDate = 2011-05-28 07:00:00 +0000;
"com.google.talkplugin" = {
LastActiveDate = 2014-03-31 17:39:31 +0000;
LastActivePingDate = 2014-03-29 07:00:00 +0000;
LastRollCallPingDate = 2014-03-31 07:00:00 +0000;
"com.Google.GoogleEarthPlus.intel" = {
LastRollCallPingDate = 2014-03-31 07:00:01 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.9.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
2014-03-31 2:12:28.571 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x208b830
server=<KSOmahaServer:0x2085310>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=1
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.9.2_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="1001" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
2014-03-31 2:12:32.630 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x3867c0
server=<KSOmahaServer:0x2085310>
url="https://tools.google.com/service/update2"
status=200
tickets=1
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_days="2646" elapsed_seconds="47552"></daystart>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
2014-03-31 2:12:34.305 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2014-03-31 2:12:34.805 PM GoogleSoftwareUpdateDaemon[498]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2014-03-31 2:12:34.807 PM GoogleSoftwareUpdateDaemon[498]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2014-03-31 2:12:34.808 PM GoogleSoftwareUpdateDaemon[498]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2014-03-31 2:12:34.811 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2014-03-31 2:12:34.819 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
2014-03-31 2:12:34.821 PM GoogleSoftwareUpdateDaemon[498]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
2014-03-31 2:12:36.471 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x208b810
productID=com.google.talkplugin
version=5.2.4.18058
xc=<KSPathExistenceChecker:0x2085970 path=/Library/Application Support/Google/GoogleTalkPlugin.app>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2012-07-23 02:01:27
>,
<KSTicket:0x2083790
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x2089af0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2011-07-04 16:55:56
>
Using server: <KSOmahaServer:0x38e600
engine=<KSDaemonUpdateEngine:0x379570>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.GmailNotifier" = {
LastRollCallPingDate = 2011-01-14 08:00:01 +0000;
"com.google.Chrome" = {
LastActiveDate = 2014-03-16 20:40:48 +0000;
LastActivePingDate = 2014-03-17 07:00:00 +0000;
LastRollCallPingDate = 2014-03-31 07:00:01 +0000;
"com.google.GoogleDrive" = {
LastActiveDate = 2014-02-13 18:22:12 +0000;
LastActivePingDate = 2014-02-14 08:00:06 +0000;
LastRollCallPingDate = 2014-03-31 07:00:01 +0000;
"com.Google.GoogleEarthPlugin.intel" = {
LastRollCallPingDate = 2014-03-31 07:00:01 +0000;
"com.google.Keystone" = {
LastActiveDate = 2014-03-31 20:12:25 +0000;
LastActivePingDate = 2014-03-31 07:00:01 +0000;
LastRollCallPingDate = 2014-03-31 07:00:01 +0000;
"com.Google.GoogleEarthPlus" = {
LastRollCallPingDate = 2011-05-28 07:00:00 +0000;
"com.google.talkplugin" = {
LastActiveDate = 2014-03-31 17:39:31 +0000;
LastActivePingDate = 2014-03-29 07:00:00 +0000;
LastRollCallPingDate = 2014-03-31 07:00:00 +0000;
"com.Google.GoogleEarthPlus.intel" = {
LastRollCallPingDate = 2014-03-31 07:00:01 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.9.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
2014-03-31 2:12:36.472 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x38af00
server=<KSOmahaServer:0x38e600>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=2
activeTickets=1
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.9.2_i486"></o:os>
<o:app appid="com.google.talkplugin" version="5.2.4.18058" lang="en-us" installage="616" brand="GGLG">
<o:ping a="2"></o:ping>
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="1001" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
2014-03-31 2:12:38.067 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x385990
server=<KSOmahaServer:0x38e600>
url="https://tools.google.com/service/update2"
status=200
tickets=2
activeTickets=1
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_days="2646" elapsed_seconds="47557"></daystart>
<app appid="com.google.talkplugin" status="ok">
<ping status="ok"></ping>
<updatecheck status="noupdate"></updatecheck>
</app>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
2014-03-31 2:12:38.072 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2014-03-31 2:12:38.602 PM GoogleSoftwareUpdateDaemon[498]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2014-03-31 2:12:38.604 PM GoogleSoftwareUpdateDaemon[498]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2014-03-31 2:12:38.605 PM GoogleSoftwareUpdateDaemon[498]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2014-03-31 2:12:38.607 PM GoogleSoftwareUpdateDaemon[498]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2014-03-31 2:12:45.046 PM GoogleSoftwareUpdateDaemon[498]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
2014-03-31 2:12:56.933 PM GoogleSoftwareUpdateDaemon[498]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
2014-03-31 2:17:32.499 PM xpcproxy[512]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2014-03-31 2:17:50.376 PM com.apple.SecurityServer[14]: Session 100023 created
2014-03-31 2:22:55.161 PM WindowServer[97]: disable_update_timeout: UI updates were forcibly disabled by application "Microsoft Word" for over 1.00 seconds. Server has re-enabled them.
2014-03-31 2:22:58.789 PM WindowServer[97]: common_reenable_update: UI updates were finally reenabled by application "Microsoft Word" after 4.63 seconds (server forcibly re-enabled them after 1.00 seconds)
2014-03-31 2:23:06.604 PM WindowServer[97]: disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
2014-03-31 2:23:20.604 PM WindowServer[97]: disable_update_likely_unbalanced: UI updates still disabled by application "Safari" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
2014-03-31 2:23:25.875 PM WindowServer[97]: common_reenable_update: UI updates were finally reenabled by application "Safari" after 20.27 seconds (server forcibly re-enabled them after 1.00 seconds)
2014-03-31 2:23:25.923 PM Safari[345]: void CGSUpdateManager::log() const: conn 0x148d7: spurious update.
2014-03-31 2:25:01.211 PM mDNSResponder[39]: 62: Could not write data to clientPID[345](Safari) because of error - aborting connection
2014-03-31 2:25:01.211 PM mDNSResponder[39]: 62: DNSServiceGetAddrInfo v4v6 clients1.google.com. PID[345](Safari)
2014-03-31 2:37:54.909 PM WindowServer[97]: disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
2014-03-31 2:38:01.353 PM WindowServer[97]: common_reenable_update: UI updates were finally reenabled by application "Safari" after 7.44 seconds (server forcibly re-enabled them after 1.00 seconds)
2014-03-31 2:40:58.862 PM mDNSResponder[39]: 44: Could not write data to clientPID[345](Safari) because of error - aborting connection
2014-03-31 2:40:58.862 PM mDNSResponder[39]: 44: DNSServiceGetAddrInfo v4v6 clients1.google.com. PID[345](Safari)
2014-03-31 2:41:41.247 PM com.apple.WebKit.Networking[348]: CFNetwork SSLHandshake failed (-9806)
2014-03-31 2:47:21.677 PM com.apple.backupd[551]: Starting manual backup
2014-03-31 2:47:21.880 PM com.apple.backupd[551]: Error -35 while resolving alias to backup target
2014-03-31 2:47:22.303 PM com.apple.backupd[551]: Backup failed with error 18: The backup disk could not be found.
2014-03-31 2:47:22.000 PM kernel[0]: USBMSC Identifier (non-unique): 1f00c7029e4b21024b000000 0x59f 0x101d 0x1, 2
2014-03-31 2:48:05.000 PM kernel[0]: hfs: mounted Aaron Wynn's Hard Drive on device disk1s3
2014-03-31 2:48:07.994 PM com.apple.SecurityServer[14]: Session 100003 created
2014-03-31 2:48:21.340 PM com.apple.backupd[551]: Starting manual backup
2014-03-31 2:48:29.903 PM com.apple.backupd[551]: Backing up to /dev/disk1s3: /Volumes/Aaron Wynn's Hard Drive/Backups.backupdb
2014-03-31 2:48:32.083 PM com.apple.backupd[551]: Event store UUIDs don't match for volume: Macintosh HD
2014-03-31 2:48:48.957 PM com.apple.backupd[551]: Deep event scan at path:/ reason:must scan subdirs|new event db|
2014-03-31 2:48:50.330 PM com.apple.IconServicesAgent[233]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/Frameworks/AppKit.framework/Versions/C/XPCServices/com.a pple.appkit.xpc.openAndSavePanelService.xpc/
2014-03-31 2:49:37.136 PM com.apple.appkit.xpc.openAndSavePanelService[573]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
2014-03-31 2:49:37.147 PM com.apple.appkit.xpc.openAndSavePanelService[573]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
2014-03-31 2:49:37.985 PM com.apple.appkit.xpc.openAndSavePanelService[573]: Bogus event received by listener connection:
<error: 0x7fff727ccb50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff727cce60> { length = 18, contents = "Connection invalid" }
2014-03-31 2:49:41.335 PM WindowServer[97]: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
2014-03-31 2:49:41.720 PM WindowServer[97]: common_reenable_update: UI updates were finally reenabled by application "com.apple.appkit.xpc.openAndSav" after 1.39 seconds (server forcibly re-enabled them after 1.00 seconds)
2014-03-31 2:49:45.330 PM TextEdit[571]: view service marshal for <NSRemoteView: 0x7fcefbd05390> failed to forget accessibility connection due to Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated from this process.) UserInfo=0x608000264a40 {NSDebugDescription=The connection was invalidated from this process.}
timestamp: 14:49:45.328 Monday 31 March 2014
process/thread/queue: TextEdit (571) / 0x10953e000 / com.apple.NSXPCConnection.user.endpoint
code: line 2972 of /SourceCache/ViewBridge/ViewBridge-46.2/NSRemoteView.m in __57-[NSRemoteView viewServiceMarshalProxy:withErrorHandler:]_block_invoke
domain: communications-failure
2014-03-31 2:49:45.332 PM com.apple.appkit.xpc.openAndSavePanelService[573]: remote view marshal proxy failed to forward event to remote due to Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated from the other process or the connection name was invalid.) UserInfo=0x7ff2f9f8a6d0 {NSDebugDescription=The connection was invalidated from the other process or the connection name was invalid.}
timestamp: 14:49:45.332 Monday 31 March 2014
process/thread/queue: com.apple.appkit.xpc.openAndSavePanelService (573) / 0x106587000 / com.apple.NSXPCConnection.user.571
code: line 1006 of /SourceCache/ViewBridge/ViewBridge-46.2/NSViewServiceMarshal.m in __59-[NSViewServiceMarshal remoteViewMarshal:withErrorHandler:]_block_invoke
domain: communications-failure
2014-03-31 2:49:45.333 PM com.apple.appkit.xpc.openAndSavePanelService[573]: remote view marshal proxy failed to tell remote whether we have a first responder due to Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated from the other process or the connection name was invalid.) UserInfo=0x7ff2f9f8a6d0 {NSDebugDescription=The connection was invalidated from the other process or the connection name was invalid.}
timestamp: 14:49:45.333 Monday 31 March 2014
process/thread/queue: com.apple.appkit.xpc.openAndSavePanelService (573) / 0x106587000 / com.apple.NSXPCConnection.user.571
code: line 1006 of /SourceCache/ViewBridge/ViewBridge-46.2/NSViewServiceMarshal.m in __59-[NSViewServiceMarshal remoteViewMarshal:withErrorHandler:]_block_invoke
domain: communications-failure
2014-03-31 2:49:49.480 PM WindowServer[97]: disable_update_timeout: UI updates were forcibly disabled by application "TextEdit" for over 1.00 seconds. Server has re-enabled them.
2014-03-31 2:49:51.734 PM WindowServer[97]: common_reenable_update: UI updates were finally reenabled by application "TextEdit" after 3.25 seconds (server forcibly re-enabled them after 1.00 seconds)
2014-03-31 2:50:39.212 PM TextEdit[571]: Couldn't contact spell checker for U.S. English
2014-03-31 2:50:40.483 PM AppleSpell[310]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
2014-03-31 2:50:40.484 PM AppleSpell[310]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
2014-03-31 2:50:40.484 PM AppleSpell[310]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
2014-03-31 2:50:40.485 PM AppleSpell[310]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
2014-03-31 2:50:40.485 PM AppleSpell[310]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
2014-03-31 2:50:42.322 PM revisiond[28]: sqlite3_step failed: 11 database disk image is malformed
2014-03-31 2:50:42.322 PM revisiond[28]: _CSInsertChunk failed, i:0, count:1
2014-03-31 2:50:42.322 PM revisiond[28]: _CSStoreChunks failed, batchIndex:0, batchCount:1
2014-03-31 2:50:42.322 PM revisiond[28]: CSrabin_chunk_stream failed
2014-03-31 2:50:42.322 PM revisiond[28]: CKCreateStoredFile failed for "/.vol/16777218/2/.DocumentRevisions-V100/PerUID/501/e4/com.apple.documentVersi ons/63490ED2-C8F5-407F-BD97-DFA80FB9D264.rtf"
2014-03-31 2:51:12.225 PM AppleSpell[310]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
2014-03-31 2:51:12.226 PM AppleSpell[310]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
2014-03-31 2:51:12.226 PM AppleSpell[310]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
2014-03-31 2:51:12.227 PM AppleSpell[310]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
2014-03-31 2:56:26.141 PM com.apple.SecurityServer[14]: Killing auth hosts
2014-03-31 2:56:26.141 PM com.apple.SecurityServer[14]: Session 100023 destroyed
2014-03-31 2:56:26.190 PM com.apple.SecurityServer[14]: Session 100024 created
2014-03-31 2:59:10.569 PM xpcproxy[597]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2014-03-31 2:59:40.542 PM Console[598]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
Similar Messages
-
My MacBook Pro suddenly became very slow, cursor responding slowely
My MacBook Pro suddenly became very slow, cursor responding slowely
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hi internet on my Mac(OS10.9.1) suddenly became very slow. Could somebody help me? Thanks.
Try resetting everything:
power down everything: modem, router, and computer
power up each item in turn in the same order: modem, router, and computer. Let each power up completely before moving on to the next. -
My macbook pro became very slow all of a sudden?
I just bought a used macbook pro early 2012. It was all restored and nice when I got it. It has worked perfectly for about a week and then I don't know why, but all of a sudden it became very slow in every aspect; Booting, opening apps, even surfing on the web became slower and laggy. It also seems like it has a battery problem when it is in standby. Because it uses a lot of power. Actually so much that it might go dead just by standing for a few hours. Is there anything I can do?
In regards to the battery situation, try a SMC reset:
http://support.apple.com/kb/HT3964
Is there a change?
When you got the MBP, was Mavericks the installed OSX? What you may have to do is boot the MBP with the OPTION+COMMAND+R keys. This will connect you to the Apple servers and allow you to erase the HDD and install the original OSX that the MBP came with. This sets up the MBP to your Apple ID and will permit you to install any appropriate updates accordingly. You may then download and install Mavericks from the App Store.
Ciao. -
Mac suddenly became very slow on OS-X
Problem description:
Machine became suddenly very slow only on OS-X. Checked with Linux and works ok.
Detailed description:
On December 31th machine begun to behave abnormally slow. Long waits between keystrokes and the character appearance on the screen and the coloured spinning wheel appeared very often. The machine appeared to hang from time to time, applications and internet were completely unresponssive. I decided to make clean install of Yosemite using its recovery. The recovery took longer than 16 hours and after this the machine was in the same state as before. In order to debug the problem I decided to use a Linux distribution and I booted its live dvd. On Linux everything went smooth, all application and operations were responsive, no hiccups.
I drove the conclusion that the issue is related either to the software in OS-X or there is some hidden state/settings on the machine that is causing the issue.
It cannot be on the hard drive because I have repartitioned it and made a clean install so there must be something in the firmware.
Problem description:
Random hangs on the computer. Everything becomes unresponsive, spinning wheel appear every 3-4 seconds and keystrokes are echoed with a 4-5 seconds delay. I suspect that it is a software problem as it is happening only on OS-X as I have booted a live Linux distro and everything works ok hence I drove the conclusion that there might be something related to the system state in OS-X.
EtreCheck version: 2.1.5 (108)
Report generated 5 Jan 2015 07:38:02 EET
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 5:11:38
Disk Information: ℹ️
APPLE HDD TOSHIBA MK7559GSXF disk0 : (750,16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (735.16 GB free)
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 748.93 GB Disk used: 13.76 GB
Destinations:
TimeMachine [Network]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 13.76 GB X 3)
Top Processes by CPU: ℹ️
5% installd
3% WindowServer
3% hidd
3% App Store
1% storedownloadd
Top Processes by Memory: ℹ️
155 MB softwareupdated
86 MB Finder
77 MB mds_stores
77 MB com.apple.WebKit.WebContent
69 MB installd
Virtual Memory Information: ℹ️
2.94 GB Free RAM
2.97 GB Active RAM
1.71 GB Inactive RAM
971 MB Wired RAM
2.54 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 5, 2015, 02:27:07 AM Self test - passed1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n -\tmod date: %s\n -\tchecksum: %s\n%s\n' '\n ...and %s more line(s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\/|\.prefP/&&/\/(Lib|usr).+\/(.+\.lproj|Contents|Info\.plist|Resources)|\.framework$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/([A-Za-z_]+\.lproj|Contents|Resources|Versions)(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)|\.(action|bundle|framework|kext|pkg|prefPane|service|vst)$/d;p;' 's/Pr.+n //p' ' /.kext$/ { s=system("PlistBuddy -c Print\\ :OSBundleRequired "$0"/*/I*|grep -q Sa");if(s==0) $0=$0" S"; };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n -\t"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' /[my]: /H;/^ *Lo.+: /{ H;b0'$'\n'' };$b0'$'\n'' d;:0'$'\n'' x;/: [3IU]/!d;s/.+n: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c Print\' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Stylesheet Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 14 31;A4 39 57 70 0;B2 15;B6 14 15 4;C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 31;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My Macbook suddenly runs very slow
Hi
I have noticed the last 4 days my Macbook Pro really runs slow the last 4 days. Everything takes ages to load. I have an SSD drive so it should be better.
I have enclosed the Etre result below
Help appreciated
Thank you
Brian
EtreCheck version: 1.9.12 (48)
Report generated 19 April 2015 23:44:17 BST
Hardware Information:
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software:
OS X 10.9.5 (13F1077) - Uptime: 0 days 1:17:23
Disk Information:
Samsung SSD 840 EVO 500GB disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
SSD (disk0s2) / [Startup]: 474.11 GB (104.69 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
disk0s4 (disk0s4) <not mounted>: 24.48 GB
Recovery HD (disk0s5) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Fitbit Inc. Fitbit Base Station
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[loaded] com.Cycling74.driver.SAVD (1.0.0d1 - SDK 10.6) Support
[not loaded] com.anchorfree.tun (1.1.1 - SDK 10.8) Support
[loaded] com.eltima.SyncMate.kext (0.2.5b15) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
Startup Items:
HP IO: Path: /Library/StartupItems/HP IO
HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.anchorfree.ajaxserver.plist Support
[loaded] com.bombich.ccc.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.radiosilenceapp.nke.PrivateEye.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] com.torch.update.agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
[failed] rapiback.plist Support
Launch Agents:
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
[failed] syncmateStarter.plist Support
User Launch Agents:
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.ltvbit.plist Support
[running] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.skype.c2c_service.plist Support
User Login Items:
iSyncr
iTunesHelper
Fireplace live HD free
Shrook
Degrees
Google Chrome
Pling
Box Sync
Google Chrome
Android File Transfer Agent
Google Chrome
Alfred 2
Dropbox
SpeechSynthesisServer
Fitbit Connect Menubar Helper
EvernoteHelper
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 17.0.0.169 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
nplastpass: Version: 2.5.5 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 8 Update 31 Check version
Safari Extensions:
Add To Amazon Wish List: Version: 1.8
iMedia Converter Deluxe : Version: 3.1.0
Pinterest: Version: 1.0
LastPass: Version: 3.1.91
The New York Times: Version: 0.1
Omnibar: Version: 1.2
Twitter for Safari: Version: 1.02
Video Converter: Version: 3.1.0
Bing Highlights: Version: 1.0.24
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
Java Support
Trusteer Endpoint Protection Support
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
SSD: Disk size: 441.55 GB Disk used: 344.05 GB
Destinations:
Seagate Backup Plus Drive [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Too small
Backup size 0 B < (Disk used 344.05 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
21% storeagent
2% WindowServer
1% firefox
0% BBLaunchAgent
0% Fitbit Connect Menubar Helper
Top Processes by Memory:
299 MB firefox
123 MB Finder
61 MB soagent
53 MB WindowServer
53 MB com.apple.IconServicesAgent
Virtual Memory Information:
832 MB Free RAM
1.40 GB Active RAM
201 MB Inactive RAM
764 MB Wired RAM
596 MB Page-ins
21 MB Page-outsWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
My iMac suddenly became very slow
Hi everybody, I have seen some previous posts about more or less the same subject, nevertheless I ask for help because I am not sure I can try to apply some suggestions to my case.
Well, I own a late 2007 20" Intel iMac (Intel Core 2 Duo), with 4Gb RAM and the default 320 Gb hard disk. It has been regularly upgraded, operating system-wise, and now it runs with Mountain Lion (intalled from scratch).
I don't do so much work with the iMac, the most used applications being Safari and Chrome for internet surfing, and Thunderbird for the email. I also use iPhoto for pictures loading and storing.
It happened very seldom so far that the computer hung during the startup (remaining in the grey screen), requesting a strong power off action.
A couple of days ago a sudden electrical power shutdown during a thunderstorm acted on the iMac, too.
Yesterday the iMac started sporting the rolling beach ball most of the time. Even if there only the Finder working, the ball appears and stays there.
I started the iMac from the restore partition, launching the "verify disk" and "verify permissions" tasks via Disk Utility on the internal HD: the result was "disk OK" and a very few repaired permissions. But then the problem rose again.
It is very hard, in such condition, to try to execute utilities like Onyx or system funcions like Spotlight, or even launch the Activities Monitor. What I can say is neither the CPU nor the memory seemed to be heavily affected by the computer activity.
I could to a last Time Machine backup, so no data was lost so far, but since yesterday evening the ball is rolling and nothing happend to the computer.
Please note that while I was trying to find out what the problem could be, it also happened that the screen started switching alternatively from the desktop background picture to the startup grey screen. Then is stopped blinking this way.
I sincerely don't know how I can try to better find out what the problem could be. Any suggestions? I tried to be as detailed as possibile, but if more information is needed, I am ready to supply it.
Thank you very much in advance to everybody.
GiovanniI whall try with the operations you sugget.
In the meantime the iMac apparentely started working fine again .
I was able to run the hardware test using the program provided with the original iMac DVD's, and it reported the following error:
4MOT/1/40000003:HDD
From what I could see on the Internet, it should be related to the HDD fan not workinf properly and therefore having the HDD temperature rise, but someone also states it could be the RAM memory.
I'll try to check it more tonight. -
Firefox 19 suddenly became very slow after using it for about an hour.
I've been using firefox 19 since it came out and have experienced no problems. Now today after about an hour of using the browser it has become so slow to the point where it becomes unresponsive for about ten seconds when I try to switch to a different tab. What is strange is that when I run firefox in safe mode, its fine, but I haven't downloaded any addons for a few weeks. Any help would be appreciated.
*Remove your Unwanted Extensions
*updated your plugins
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
It happened when I was browsing the RMS Titanic website (this site has some animation, so i guess the problem originates from the plugins that allow this animation). Now Firefox is awfully slow.
It happened when I was browsing the RMS Titanic website (this site has some animation, so i guess the problem originates from the plugins that allow this animation). Now Firefox is awfully slow.
-
My Macbook pro suddenly running very slow
I have a 13" mid 2012 Macbook pro running OS X Mavericks v 10.9.4. About two weeks ago it suddenly became very slow and unresponsive. Startup and shut down takes much longer than usual, file transfers are slow and apps are taking forever to launch. The rainbow wheel would show up almost anytime and trivial tasks like opening a new tab in browser or opening finder. More recently, a new problem has also cropped up: my mac is not going to sleep on closing the lid.
Over last two weeks I have tried the following:
- Repair disk and disk permissions.
- Reset SMC
- Reset PRAM
- Start in safe mode.
- Clean install of OS X (after erasing the hard drive).
but none of this has helped. I also ran Apple Hardware Test but got nothing. I fear my hard drive may be failing. Is there anything else I can try before I have to take it to the apple store. Any help would be sppreciated. Thanks.
Here is some information on my macbook:
MacBook Pro 13-inch Mid 2012
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000
Software OS X 10.9.4 (13E28)1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hello My macbook pro has suddenly become very slow,any solution?
I had no problems with my Macbook pro, since yesterday it became very slow ,i tried to close and remove many pages as possible,tried to update ,but still slow.
Any thing else to do?Hey Tafaya,
Thanks for the question. I understand that you are experiencing performance issues with your MacBook Pro. The following resource may provide a solution, while it is titled for OS X Mavericks - the same steps apply for Yosemite:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Thanks,
Matt M. -
My macbook air became too slow, my macbook air became too slow
Hi dear Mac users
My macbook air became very slow.... is it because I have too many pics? or can I do some type of organization that I never did before?Saying it is running slow is a bit vague, can you be more specific about when/how it is running slow (i.e. what tasks/programs/actions are you undertaking when it runs slow?)
It is doubtful that you have so many pics on your Air that it is running slow because of that, you'd have to have 10s of thousands of pictures to even come close to filling up the storage capacity of a 128 SSD (which I'm just guessing you have.)
By "organization" I'm assuming you're referring either to doing a disk defrag (not necessary on Mac's, especially an SSD driven Air due to the nature of SSD read/write capabilites,) or you're referring to how you have your pictures arranged in files on your storage drive, which isn't likely to be the culprit, either.
Given the lack of knowledge I'm going to guess that if you're noticing the slowness during normal operations it is probably going to be due to having too many CPU-intensive apps running at the same time (running flash based webpages is a major CPU hog as well as some high-res video or 3D apps/games.)
Let us know more and I'm sure someone here can help you figure it out, though.
Cheers! -
The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?
I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex -
My Macbook Pro suddenly became really slow
3 Days ago my Macbook Pro suddenly became really slow. I can't run anything without my computer freezing. I've had my Macbook Pro since mid-2012 (21 months). The first thing i did was check my activity monitor, which said that I was apparently using 4 GB (half) of my Macbook Pro's RAM, even though nothing was running. The process that was using the most RAM was kernal.task, which was only around 600mb of RAM. All the processes RAM amounts only added up to around 1 GB, not four. I can't even open safari without my computer freezing. The amount of RAM being "used" on my computer slowly started to increase, even though nothing was running, until it got to all 8 GB being used. When i restart my computer, it goes back to 4 GB and starts to rise again. My processor, on the other hand, is doing nothing. Its acting normally. How do i get my computer back to its usual performance?
Hardware Specifications
13-inch Mid-2012 Macbook Pro
Processor: 2.9 GHz Intel Core i7
Memory: 8 GB 1600 MHz DDR3
Graphics: Intel HD Graphics 4000 1024 MB
750 GB HDD
OS X 10.9.2Since you are using Mavericks OS, the amount of RAM being used is inconsequential but the 'pressure' is. If green is showing then the RAM usage is normal. This is a change fro prior OSX's.
The usual problem will lie with the HDD, It may be too full or needs to be repaired or replaced. Go into OSX recovery and select from the 4 option menu Disk Utility. Choose First Aid and run Verify and Repair.
(Start the MBP with the OPTION key down and select the recovery partition)
If that does not solve the problem, try a safe boot:
http://support.apple.com/kb/ht1564
If the MBP responds 'normally' that usually indicates that there is a third part application that is causing the problem. They have to bedeleted and reinstalled in a systematic way so that you can identify the culprit.
Ciao. -
Suddenly my MacBook Air is very slow to boot up. It's about a year and a half old. I'm running Mac OS X Lion 10.7.5 (11G63) -- and I'm far from being an expert at any of this stuff, have seen a few different answers and not sure what to do. Help! Grateful.
Okay, I am having a try at this. My machine wouldn't boot this morning again (like I said, it's erratic, so I then did a "safe boot" and restarted. This is what I think (I hope...) you want. Here's the first part, tho you'll see I am struggling with Part 2.
10/06/2014 07:48:18.000 bootlog: BOOT_TIME 1402382898 0
10/06/2014 07:55:07.983 com.apple.kextd: Safe boot mode detected; invalidating system extensions caches.
10/06/2014 07:55:07.985 com.apple.kextd: Cache file /System/Library/Caches/com.apple.kext.caches/Directories/System/Library/Extensi ons/KextIdentifiers.plist.gz is out of date; not using.
10/06/2014 07:55:07.000 kernel: PMAP: PCID enabled
10/06/2014 07:55:07.000 kernel: PMAP: Supervisor Mode Execute Protection enabled
10/06/2014 07:55:07.000 kernel: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
10/06/2014 07:55:07.000 kernel: vm_page_bootstrap: 546822 free pages and 501754 wired pages
10/06/2014 07:55:07.000 kernel: kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
10/06/2014 07:55:07.000 kernel: zone leak detection enabled
10/06/2014 07:55:07.000 kernel: standard timeslicing quantum is 10000 us
10/06/2014 07:55:07.000 kernel: mig_table_max_displ = 73
10/06/2014 07:55:07.000 kernel: TSC Deadline Timer supported and enabled
10/06/2014 07:55:07.000 kernel: SAFE BOOT DETECTED - only valid OSBundleRequired kexts will be loaded.
10/06/2014 07:55:07.000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
10/06/2014 07:55:07.000 kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
10/06/2014 07:55:07.000 kernel: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
10/06/2014 07:55:07.000 kernel: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
10/06/2014 07:55:07.000 kernel: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
10/06/2014 07:55:07.000 kernel: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
10/06/2014 07:55:07.000 kernel: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
10/06/2014 07:55:07.000 kernel: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
10/06/2014 07:55:07.000 kernel: calling mpo_policy_init for Sandbox
10/06/2014 07:55:07.000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
10/06/2014 07:55:07.000 kernel: calling mpo_policy_init for Quarantine
10/06/2014 07:55:07.000 kernel: Security policy loaded: Quarantine policy (Quarantine)
10/06/2014 07:55:07.000 kernel: calling mpo_policy_init for TMSafetyNet
10/06/2014 07:55:07.000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
10/06/2014 07:55:07.000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
10/06/2014 07:55:07.000 kernel: The Regents of the University of California. All rights reserved.
10/06/2014 07:55:07.000 kernel: MAC Framework successfully initialized
10/06/2014 07:55:07.000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
10/06/2014 07:55:07.000 kernel: IOAPIC: Version 0x20 Vectors 64:87
10/06/2014 07:55:07.000 kernel: ACPI: System State [S0 S3 S4 S5]
10/06/2014 07:55:07.000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
10/06/2014 07:55:07.000 kernel: [ PCI configuration begin ]
10/06/2014 07:55:07.000 kernel: console relocated to 0xf50000000
10/06/2014 07:55:08.000 kernel: PCI configuration changed (bridge=15 device=2 cardbus=0)
10/06/2014 07:55:08.000 kernel: [ PCI configuration end, bridges 10 devices 12 ]
10/06/2014 07:55:08.000 kernel: AppleIntelCPUPowerManagement: Turbo Ratios 0035
10/06/2014 07:55:08.000 kernel: AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
10/06/2014 07:55:08.000 kernel: mbinit: done [64 MB total pool size, (42/21) split]
10/06/2014 07:55:08.000 kernel: Pthread support ABORTS when sync kernel primitives misused
10/06/2014 07:55:08.000 kernel: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
10/06/2014 07:55:08.000 kernel: AppleThunderboltNHIType2::start - type 2 sleep enabled
10/06/2014 07:55:08.000 kernel: AppleThunderboltNHIType2::start - SXFP method found
10/06/2014 07:55:08.000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
10/06/2014 07:55:08.000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
10/06/2014 07:55:08.000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
10/06/2014 07:55:08.000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
10/06/2014 07:55:08.000 kernel: AppleIntelCPUPowerManagementClient: ready
10/06/2014 07:55:08.000 kernel: BTCOEXIST off
10/06/2014 07:55:08.000 kernel: wl0: Broadcom BCM4353 802.11 Wireless Controller
10/06/2014 07:55:08.000 kernel: 5.106.198.19
10/06/2014 07:55:08.000 kernel: rooting via boot-uuid from /chosen: 70452A04-BA27-3AA6-A252-7F32179EC729
10/06/2014 07:55:08.000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
10/06/2014 07:55:08.000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE SSD TS128E Media/IOGUIDPartitionScheme/Customer@2
10/06/2014 07:55:08.000 kernel: BSD root: disk0s2, major 14, minor 2
10/06/2014 07:55:08.000 kernel: jnl: unknown-dev: replay_journal: from: 7179264 to: 8289280 (joffset 0x11502000)
10/06/2014 07:55:08.000 kernel: jnl: unknown-dev: journal replay done.
10/06/2014 07:55:08.000 kernel: Kernel is LP64
10/06/2014 07:55:08.000 kernel: USBMSC Identifier (non-unique): 000000000310 0x5ac 0x8404 0x310
10/06/2014 07:55:08.000 kernel: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
10/06/2014 07:55:08.000 kernel: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
10/06/2014 07:55:08.000 kernel: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
10/06/2014 07:55:08.000 kernel: USBF: 4.615 IOUSBCompositeDriver[0xffffff8008374300](CompositeDevice) SetConfiguration (1) returned 0xe000404f
10/06/2014 07:55:08.000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
10/06/2014 07:55:08.000 kernel: hfs: Removed 0 orphaned / unlinked files and 10 directories
10/06/2014 07:48:19.176 com.apple.launchd: *** launchd[1] has started up. ***
10/06/2014 07:55:07.907 com.apple.launchd: (com.apple.powerd) Unknown value for key POSIXSpawnType: Interactive
10/06/2014 07:55:07.907 com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
10/06/2014 07:55:07.908 com.apple.launchd: (com.apple.usbmuxd) Unknown value for key POSIXSpawnType: Interactive
10/06/2014 07:55:08.733 fseventsd: event logs in /.fseventsd out of sync with volume. destroying old logs. (32317 409 32766)
10/06/2014 07:55:08.749 fseventsd: log dir: /.fseventsd getting new uuid: 28A0FB38-2172-4936-8866-3220B9641918
10/06/2014 07:55:09.009 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built Jun 25 2011 01:16:59
10/06/2014 07:55:09.013 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
10/06/2014 07:55:09.013 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en0 - PreProbe
10/06/2014 07:55:09.013 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
10/06/2014 07:55:09.014 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
10/06/2014 07:55:09.014 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en0 - PreProbe
10/06/2014 07:55:09.014 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
10/06/2014 07:55:09.014 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
10/06/2014 07:55:09.000 kernel: AirPort_Brcm4331: Ethernet address 7c:d1:c3:de:35:3d
10/06/2014 07:55:09.000 kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
10/06/2014 07:55:09.000 kernel: IO80211Interface::efiNVRAMPublished():
10/06/2014 07:55:09.823 com.apple.kextd: Cache file /System/Library/Caches/com.apple.kext.caches/Startup/IOKitPersonalities_x86_64. ioplist.gz is out of date; not using.
10/06/2014 07:55:09.938 airportd: _processDLILEvent: en0 attached (down)
10/06/2014 07:55:10.076 com.apple.SecurityServer: Session 100000 created
10/06/2014 07:55:10.000 kernel: in func createVirtualInterface ifRole = 1
10/06/2014 07:55:10.000 kernel: Created virtif 0xffffff8006faba00 p2p0
10/06/2014 07:55:10.101 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
10/06/2014 07:55:10.101 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
10/06/2014 07:55:10.128 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en0 - PreProbe
10/06/2014 07:55:10.189 configd: setting hostname to "Names-MacBook-Air.local"
10/06/2014 07:55:10.000 kernel: AirPort: Link Down on en0. Reason 1 (Unspecified).
10/06/2014 07:55:10.202 configd: network configuration changed.
10/06/2014 07:55:10.207 com.apple.SecurityServer: Entering service
10/06/2014 07:55:10.424 UserEventAgent: ServermgrdRegistration cannot load config data
10/06/2014 07:55:10.444 UserEventAgent: get_backup_share_points no AFP
10/06/2014 07:55:12.000 kernel: en0: 802.11d country code set to 'GB'.
10/06/2014 07:55:12.000 kernel: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
10/06/2014 07:55:13.031 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
10/06/2014 07:55:13.098 com.apple.pfctl: No ALTQ support in kernel
10/06/2014 07:55:13.098 com.apple.pfctl: ALTQ related functions disabled
10/06/2014 07:55:13.337 com.apple.kextd: Can't load AppleMCCSControl.kext - ineligible during safe boot.
10/06/2014 07:55:13.347 com.apple.kextd: Load com.apple.driver.AppleMCCSControl failed; removing personalities from kernel.
10/06/2014 07:55:13.361 mDNSResponder: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
10/06/2014 07:55:13.000 kernel: macx_swapon SUCCESS
10/06/2014 07:55:13.656 com.apple.usbmuxd: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
10/06/2014 07:55:13.918 com.apple.kextd: Can't load AppleThunderboltEDMSink.kext - ineligible during safe boot.
10/06/2014 07:55:13.924 com.apple.kextd: Load com.apple.driver.AppleThunderboltEDMSink failed; removing personalities from kernel.
10/06/2014 07:55:13.967 systemkeychain: done file: /var/run/systemkeychaincheck.done
10/06/2014 07:55:14.000 kernel: Waiting for DSMOS...
10/06/2014 07:55:14.036 configd: network configuration changed.
10/06/2014 07:55:14.042 configd: network configuration changed.
10/06/2014 07:55:14.092 com.apple.kextd: Can't load AppleSMBusPCI.kext - ineligible during safe boot.
10/06/2014 07:55:14.096 com.apple.kextd: Load com.apple.driver.AppleSMBusPCI failed; removing personalities from kernel.
10/06/2014 07:55:14.099 mDNSResponder: D2D_IPC: Loaded
10/06/2014 07:55:14.099 mDNSResponder: D2DInitialize succeeded
10/06/2014 07:55:14.000 kernel: MacAuthEvent en0 Auth result for: cc:33:bb:49:b1:9a MAC AUTH succeeded
10/06/2014 07:55:14.000 kernel: wlEvent: en0 en0 Link UP virtIf = 0
10/06/2014 07:55:14.000 kernel: AirPort: Link Up on en0
10/06/2014 07:55:14.000 kernel: en0: BSSID changed to cc:33:bb:49:b1:9a
10/06/2014 07:55:14.314 com.apple.kextd: Can't load AppleHDAController.kext - ineligible during safe boot.
10/06/2014 07:55:14.318 com.apple.kextd: Load com.apple.driver.AppleHDAController failed; removing personalities from kernel.
10/06/2014 07:55:14.363 com.apple.kextd: Can't load AppleSMCLMU.kext - ineligible during safe boot.
10/06/2014 07:55:14.366 com.apple.kextd: Load com.apple.driver.AppleSMCLMU failed; removing personalities from kernel.
10/06/2014 07:55:14.000 kernel: AirPort: RSN handshake complete on en0
10/06/2014 07:55:14.000 kernel: Previous Shutdown Cause: 3
10/06/2014 07:55:14.373 com.apple.kextd: Can't load AppleSMCPDRC.kext - ineligible during safe boot.
10/06/2014 07:55:14.377 com.apple.kextd: Load com.apple.driver.AppleSMCPDRC failed; removing personalities from kernel.
10/06/2014 07:55:14.709 com.apple.kextd: Can't load AudioIPCDriver.kext - ineligible during safe boot.
10/06/2014 07:55:14.712 com.apple.kextd: Load com.apple.driver.AudioIPCDriver failed; removing personalities from kernel.
10/06/2014 07:55:14.717 com.apple.kextd: Can't load AudioIPCDriver.kext - ineligible during safe boot.
10/06/2014 07:55:14.720 com.apple.kextd: Load com.apple.driver.AudioIPCDriver failed; removing personalities from kernel.
10/06/2014 07:55:14.727 com.apple.kextd: Can't load AppleIntelHD4000Graphics.kext - ineligible during safe boot.
10/06/2014 07:55:14.729 com.apple.kextd: Load com.apple.driver.AppleIntelHD4000Graphics failed; removing personalities from kernel.
10/06/2014 07:55:14.776 netbiosd: Unable to start NetBIOS name service:
10/06/2014 07:55:14.936 com.apple.kextd: Can't load AppleUpstreamUserClient.kext - ineligible during safe boot.
10/06/2014 07:55:14.938 com.apple.kextd: Load com.apple.driver.AppleUpstreamUserClient failed; removing personalities from kernel.
10/06/2014 07:55:15.087 com.apple.kextd: Can't load ApplePlatformEnabler.kext - ineligible during safe boot.
10/06/2014 07:55:15.093 com.apple.kextd: Load com.apple.driver.ApplePlatformEnabler failed; removing personalities from kernel.
10/06/2014 07:55:15.306 com.apple.kextd: Can't load IOBluetoothSerialManager.kext - ineligible during safe boot.
10/06/2014 07:55:15.310 com.apple.kextd: Load com.apple.iokit.IOBluetoothSerialManager failed; removing personalities from kernel.
10/06/2014 07:55:15.319 com.apple.kextd: Can't load IOSurface.kext - ineligible during safe boot.
10/06/2014 07:55:15.322 com.apple.kextd: Load com.apple.iokit.IOSurface failed; removing personalities from kernel.
10/06/2014 07:55:15.330 com.apple.kextd: Can't load IOUserEthernet.kext - ineligible during safe boot.
10/06/2014 07:55:15.333 com.apple.kextd: Load com.apple.iokit.IOUserEthernet failed; removing personalities from kernel.
10/06/2014 07:55:15.000 kernel: X86PlatformShim::sendStepper - in safe boot. Set PState to PMin.
10/06/2014 07:55:15.523 loginwindow: Login Window Application Started
10/06/2014 07:55:15.927 mds: (Normal) FMW: FMW 0 0
10/06/2014 07:55:16.000 kernel: DSMOS has arrived
10/06/2014 07:55:16.135 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/06/2014 07:55:16.137 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/06/2014 07:55:16.178 WindowServer: (ipc/send) invalid destination port: IOServiceWaitQuiet for CGXMappedDisplayStart
10/06/2014 07:55:16.178 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
10/06/2014 07:55:16.431 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/06/2014 07:55:16.636 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
10/06/2014 07:55:17.000 kernel: nspace-handler-set-snapshot-time: 1402383318
10/06/2014 07:55:17.986 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
10/06/2014 07:55:17.986 com.apple.launchctl.LoginWindow: com.apple.store_helper: Already loaded
10/06/2014 07:55:17.986 com.apple.launchctl.LoginWindow: com.apple.storeagent: Already loaded
10/06/2014 07:55:18.232 com.apple.SecurityServer: Session 100004 created
10/06/2014 07:55:18.239 loginwindow: Login Window Started Security Agent
10/06/2014 07:55:18.481 airportd: _doAutoJoin: Already associated to “BTHub4-S56J”. Bailing on auto-join.
10/06/2014 07:55:19.160 SecurityAgent: Echo enabled
10/06/2014 07:55:19.160 SecurityAgent: Echo enabled
10/06/2014 07:55:19.281 configd: network configuration changed.
10/06/2014 07:55:19.499 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en0 - Probe
10/06/2014 07:55:19.501 UserEventAgent: CaptiveNetworkSupport:CNSPreferencesBuildSSIDLookup:278 ssidLookup:
10/06/2014 07:55:19.502 UserEventAgent: <empty>
10/06/2014 07:55:19.613 configd: setting hostname to "unknown-7c:d1:c3:de:35:3d.home"
10/06/2014 07:55:19.666 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on BTHub4-S56J because it is protected and not on the exception list
10/06/2014 07:55:19.680 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en0 - Unknown
10/06/2014 07:55:19.688 configd: network configuration changed.
10/06/2014 07:55:19.959 ntpd: proto: precision = 1.000 usec
10/06/2014 07:55:21.399 com.apple.mtmfs: /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//mtmfsMap46
10/06/2014 07:55:23.996 genatsdb: *GENATSDB* FontObjects generated = 364
10/06/2014 07:55:24.287 com.apple.launchd: (com.apple.xprotectupdater[33]) Exited with code: 252
10/06/2014 07:55:46.110 com.apple.backupd: Starting standard backup
10/06/2014 07:55:46.151 com.apple.backupd: Error -35 while resolving alias to backup target
10/06/2014 07:55:46.000 kernel: nspace-handler-set-snapshot-time: 1402383348
10/06/2014 07:55:56.277 com.apple.backupd: Backup failed with error: 19
10/06/2014 07:56:36.042 com.apple.backupd: Starting standard backup
10/06/2014 07:56:36.054 com.apple.backupd: Error -35 while resolving alias to backup target
10/06/2014 07:56:36.000 kernel: nspace-handler-set-snapshot-time: 1402383398
10/06/2014 07:56:46.175 com.apple.backupd: Backup failed with error: 19
10/06/2014 07:58:18.298 com.apple.mtmd: low disk space thinning needed for volume Macintosh HD (/) with 7.8 <= 10.0 pct free space
10/06/2014 07:58:18.301 com.apple.mtmd: attempting to thin because of low free space on Macintosh HD (/) by removing 2014-06-09 21:04:36 +0000
10/06/2014 07:58:18.310 com.apple.mtmd: attempting to thin because of low free space on Macintosh HD (/) by removing 2014-06-10 06:55:16 +0000
10/06/2014 07:58:18.330 com.apple.mtmd: attempting to thin because of low free space on Macintosh HD (/) by removing 2014-06-10 06:55:48 +0000
10/06/2014 07:58:18.338 com.apple.mtmd: volume Macintosh HD (/) is now in an emergency freespace condition
10/06/2014 08:00:09.756 com.apple.kextd: Cache file /System/Library/Caches/com.apple.kext.caches/Startup/KextPropertyValues_OSBundl eHelper_x86_64.plist.gz is out of date; not using.
10/06/2014 08:00:09.756 com.apple.kextd: Rescanning kernel extensions.
10/06/2014 08:00:10.192 com.apple.kextd: Can't load /System/Library/Extensions/AudioIPCDriver.kext - ineligible during safe boot.
10/06/2014 08:00:10.196 com.apple.kextd: Load com.apple.driver.AudioIPCDriver failed; removing personalities from kernel.
10/06/2014 08:00:10.198 com.apple.kextcache: rebuilding /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
10/06/2014 08:00:10.204 com.apple.kextd: Can't load /System/Library/Extensions/AppleThunderboltEDMService.kext/Contents/PlugIns/App leThunderboltEDMSink.kext - ineligible during safe boot.
10/06/2014 08:00:10.209 com.apple.kextd: Load com.apple.driver.AppleThunderboltEDMSink failed; removing personalities from kernel.
10/06/2014 08:00:10.217 com.apple.kextd: Can't load /System/Library/Extensions/AppleIntelHD4000Graphics.kext - ineligible during safe boot.
10/06/2014 08:00:10.221 com.apple.kextd: Load com.apple.driver.AppleIntelHD4000Graphics failed; removing personalities from kernel.
10/06/2014 08:00:10.233 com.apple.kextd: Can't load /System/Library/Extensions/AppleSMBusPCI.kext - ineligible during safe boot.
10/06/2014 08:00:10.237 com.apple.kextd: Load com.apple.driver.AppleSMBusPCI failed; removing personalities from kernel.
10/06/2014 08:00:10.249 com.apple.kextd: Can't load /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAController.ke xt - ineligible during safe boot.
10/06/2014 08:00:10.253 com.apple.kextd: Load com.apple.driver.AppleHDAController failed; removing personalities from kernel.
10/06/2014 08:00:10.264 com.apple.kextd: Can't load /System/Library/Extensions/AppleMCCSControl.kext - ineligible during safe boot.
10/06/2014 08:00:10.270 com.apple.kextd: Load com.apple.driver.AppleMCCSControl failed; removing personalities from kernel.
10/06/2014 08:00:10.285 com.apple.kextd: Can't load /System/Library/Extensions/ApplePlatformEnabler.kext - ineligible during safe boot.
10/06/2014 08:00:10.289 com.apple.kextd: Load com.apple.driver.ApplePlatformEnabler failed; removing personalities from kernel.
10/06/2014 08:00:10.298 com.apple.kextd: Can't load /System/Library/Extensions/AppleSMCLMU.kext - ineligible during safe boot.
10/06/2014 08:00:10.302 com.apple.kextd: Load com.apple.driver.AppleSMCLMU failed; removing personalities from kernel.
10/06/2014 08:00:10.310 com.apple.kextd: Can't load /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns/AppleSM CPDRC.kext - ineligible during safe boot.
10/06/2014 08:00:10.314 com.apple.kextd: Load com.apple.driver.AppleSMCPDRC failed; removing personalities from kernel.
10/06/2014 08:00:10.325 com.apple.kextd: Can't load /System/Library/Extensions/IOBluetoothFamily.kext/Contents/PlugIns/IOBluetoothS erialManager.kext - ineligible during safe boot.
10/06/2014 08:00:10.329 com.apple.kextd: Load com.apple.iokit.IOBluetoothSerialManager failed; removing personalities from kernel.
10/06/2014 08:00:10.337 com.apple.kextd: Can't load /System/Library/Extensions/AppleUpstreamUserClient.kext - ineligible during safe boot.
10/06/2014 08:00:10.341 com.apple.kextd: Load com.apple.driver.AppleUpstreamUserClient failed; removing personalities from kernel.
10/06/2014 08:00:10.355 com.apple.kextd: Can't load /System/Library/Extensions/IOSurface.kext - ineligible during safe boot.
10/06/2014 08:00:10.358 com.apple.kextd: Load com.apple.iokit.IOSurface failed; removing personalities from kernel.
10/06/2014 08:00:10.366 com.apple.kextd: Can't load /System/Library/Extensions/IOUserEthernet.kext - ineligible during safe boot.
10/06/2014 08:00:10.369 com.apple.kextd: Load com.apple.iokit.IOUserEthernet failed; removing personalities from kernel.
10/06/2014 08:00:10.000 kernel: Resetting IOCatalogue.
10/06/2014 08:00:11.694 com.apple.kextcache: SierraSwitchKicker.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
10/06/2014 08:00:11.705 com.apple.kextcache: SierraSupport.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
10/06/2014 08:00:11.744 com.apple.kextcache: JMicronATA.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
10/06/2014 08:00:12.952 com.apple.kextcache: SierraSwitchKicker.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
10/06/2014 08:00:12.954 com.apple.kextcache: SierraSupport.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
10/06/2014 08:00:12.958 com.apple.kextcache: JMicronATA.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
10/06/2014 08:00:13.482 com.apple.kextcache: SierraSwitchKicker.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
10/06/2014 08:00:13.625 com.apple.kextcache: SierraSupport.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
10/06/2014 08:00:14.118 com.apple.kextcache: JMicronATA.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
10/06/2014 08:00:16.599 com.apple.kextcache: / locked; waiting for lock.
10/06/2014 08:00:41.407 com.apple.kextcache: / locked; waiting for lock.
10/06/2014 08:00:50.620 SecurityAgent: User info context values set for Name
10/06/2014 08:00:50.620 SecurityAgent: User info context values set for Name
10/06/2014 08:00:50.816 authorizationhost: Failed to authenticate user <Name> (error: 9).
10/06/2014 08:00:51.000 kernel: nspace-handler-set-snapshot-time: 1402383652
10/06/2014 08:00:55.132 SecurityAgent: User info context values set for Name
10/06/2014 08:00:55.132 SecurityAgent: User info context values set for Name
10/06/2014 08:00:55.638 com.apple.mtmd: attempting to thin because of low free space on Macintosh HD (/) by removing 2014-06-10 06:56:38 +0000
10/06/2014 08:00:57.595 SecurityAgent: Login Window login proceeding
10/06/2014 08:00:57.595 SecurityAgent: Login Window login proceeding
10/06/2014 08:00:58.422 loginwindow: Login Window - Returned from Security Agent
10/06/2014 08:00:58.591 loginwindow: USER_PROCESS: 51 console
10/06/2014 08:00:58.967 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
10/06/2014 08:00:58.968 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.syncdefaultsd.push': unknown error code
10/06/2014 08:00:58.969 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.AddressBook.PushNotification': unknown error code
10/06/2014 08:00:58.970 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.safaridavclient.push': unknown error code
10/06/2014 08:00:59.119 com.apple.launchd.peruser.502: (com.apple.AirPortBaseStationAgent) Unknown value for key POSIXSpawnType: Background
10/06/2014 08:00:59.124 com.apple.launchd.peruser.502: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
10/06/2014 08:00:59.134 com.apple.launchctl.Aqua: load: option requires an argument -- D
10/06/2014 08:00:59.134 com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
10/06/2014 08:01:02.788 UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 39947
10/06/2014 08:01:03.289 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
10/06/2014 08:01:03.321 com.apple.launchd.peruser.502: (com.apple.launchctl.Aqua[133]) Exited with code: 1
10/06/2014 08:01:03.762 com.apple.launchd.peruser.502: (com.apple.mrt.uiagent[145]) Exited with code: 255
10/06/2014 08:01:05.842 SystemUIServer: Could not load menu extra NSBundle </System/Library/CoreServices/Menu Extras/Volume.menu> (not yet loaded) for Class AppleVolumeExtra
10/06/2014 08:01:09.565 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
10/06/2014 08:01:09.565 com.apple.dock.extra: 2014-06-10 08:01:09.555 com.apple.dock.extra[161:1a07] Could not connect the action buttonPressed: to target of class NSApplication
10/06/2014 08:01:09.573 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
10/06/2014 08:01:09.575 com.apple.dock.extra: 2014-06-10 08:01:09.566 com.apple.dock.extra[161:1a07] Could not connect the action buttonPressed: to target of class NSApplication
10/06/2014 08:01:09.583 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
10/06/2014 08:01:09.584 com.apple.dock.extra: 2014-06-10 08:01:09.575 com.apple.dock.extra[161:1a07] Could not connect the action buttonPressed: to target of class NSApplication
10/06/2014 08:01:09.588 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
10/06/2014 08:01:09.589 com.apple.dock.extra: 2014-06-10 08:01:09.586 com.apple.dock.extra[161:1a07] Could not connect the action buttonPressed: to target of class NSApplication
10/06/2014 08:01:10.169 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/06/2014 08:01:12.998 com.apple.SecurityServer: Session 100008 created
10/06/2014 08:01:18.200 com.apple.SecurityServer: Session 100010 created
10/06/2014 08:01:20.025 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/06/2014 08:01:20.124 sandboxd: ([169]) com.apple.qtkits(169) deny ipc-posix-shm _CS_DSHMEMLOCK
10/06/2014 08:01:20.128 sandboxd: ([169]) com.apple.qtkits(169) deny ipc-posix-shm _CS_DSHMEMLOCK
10/06/2014 08:01:20.132 sandboxd: ([169]) com.apple.qtkits(169) deny ipc-posix-shm _CGM0000000502
10/06/2014 08:01:20.136 sandboxd: ([169]) com.apple.qtkits(169) deny ipc-posix-shm _CGM0000000502
10/06/2014 08:01:20.147 sandboxd: ([169]) com.apple.qtkits(169) deny file-read-data /Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CDF-0000-0000042737C0.icc
10/06/2014 08:01:20.157 sandboxd: ([169]) com.apple.qtkits(169) deny file-read-data /Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CDF-0000-0000042737C0.icc
10/06/2014 08:01:20.176 sandboxd: ([169]) com.apple.qtkits(169) deny mach-lookup com.apple.printtool.agent
10/06/2014 08:01:21.178 sandboxd: ([169]) com.apple.qtkits(169) deny file-read-data /Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CDF-0000-0000042737C0.icc
10/06/2014 08:01:21.256 sandboxd: ([169]) com.apple.qtkits(169) deny ipc-posix-shm _CS_GSHMEMLOCK
10/06/2014 08:01:21.260 sandboxd: ([169]) com.apple.qtkits(169) deny ipc-posix-shm _CS_GSHMEMLOCK
10/06/2014 08:01:22.336 com.apple.coremedia.videodecoder: IOSurface couldn't open service: IOSurfaceRoot
10/06/2014 08:01:27.505 sandboxd: ([169]) com.apple.qtkits(169) deny file-read-data /Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CDF-0000-0000042737C0.icc
10/06/2014 08:01:27.906 sandboxd: ([169]) com.apple.qtkits(169) deny file-read-data /Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CDF-0000-0000042737C0.icc
10/06/2014 08:01:30.610 com.apple.kextcache: Created prelinked kernel //System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
10/06/2014 08:01:30.670 com.apple.kextcache: /: no supported helper partitions to update.
10/06/2014 08:01:30.671 com.apple.kextcache: Lock acquired; proceeding.
10/06/2014 08:01:30.685 com.apple.kextcache: /: no supported helper partitions to update.
10/06/2014 08:01:30.686 com.apple.kextcache: Lock acquired; proceeding.
10/06/2014 08:01:30.701 com.apple.kextcache: /: no supported helper partitions to update.
10/06/2014 08:01:44.000 kernel: CODE SIGNING: cs_invalid_page(0x1000): p=181[ksadmin] clearing CS_VALID
In Part 2, you say:
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports.
BUT -- when I go into "System diagnostic reports" (and I have checked I'm clicking on the correct one) there's nothing in the log to the right, even when I click the arrow pointing down. Below that, on the left, it says FILES and then below that there's
system.log
kernel.log
and then /Library/logs (twice) and /var/logs
What am I doing wrong?
Grateful for help.
Maybe you are looking for
-
Error while adding essbase server(V9.3.1)
Hi All, I have installed all essbase related products and configured everything thru configuration utility successfully.But while adding essbase server through ADMINISTARTION SERVICES CONSOLE,I got the following error. ===============================
-
System.out.println () is not working properly
Hi, Why does this happens: Object temp=null; System.out.println ("temp is null? "+temp==null); just prints: true expected: temp is null? true Why does this happens???? If I do System.out.println ("temp is null? "+(temp==null)); it works bu it should
-
BOM explosion in CRM Service Contract
Hello We want have a BOM explosion working in CRM for service contracts Here are the details : We have replicated the materials from ECC to CRM. We are not maintaining any BOMu2019s in ECC. The idea is that we maintain the BOM Structure in CRM only,
-
Receiver and Interface Determination, Sender and Receiver Agreement
Hi Experts, Could you please tell me, what Receiver Determination, Interface Determination, Sender Agreement and Receiver Agreement we have to use for the below blog. https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken
-
HT2905 Thousands of duplicates
I don't know how, but when i transferred my library from my old pc to my new mac all the songs duplicated either once, twice or three times. And i have many songs, so it would take me forever to delete every song manually. How can i delete all at onc