Macbook to Macbook screen

Hey someone stepped on my old macbook and the screen cracked. I bought a new one and I was wondering if you could connect the broken screen to the new macbook so that I could erase it's hard drive. Let me know if that's possible if all. Thanks guys.

Assuming the broken MacBook can actually run probably the simplest method is to start the broken computer in FW Target Disk Mode - start it while holding the T key. Then connect the old and new computer with a firewire cable. The broken Mac's hard drive should appear on the new computer's desktop. Now you can use Disk Utility to format the drive.

Similar Messages

  • Macbook Pro 13" Screen went Black - Can only see when plugged into another display! HELP!

    My MacBook Pro's screen went black last night and now when it turns on it stays black. I plugged it into my tv through the mini display port and I can see everything fine on the tv but the screen on my laptop is black. Everything else seems to be working fine. Any advice that doesn't involve taking to Genius Bar??? Already tried booting in safe mode, resetting the PRAM and NVRAM. Need to fix this ASAP. Thanks!!

    Please make a Genius Appointment and take it in for service.

  • My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    Wow!  I think I had this same issue just last night.
    I was cleaning my macbook pro retina on the outside.  Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly.  It looked super strange, it was like green halo's and it looked worse when looking at it at an angle.  Of course I took no pictures!!!  I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
    But I digress...  The image looked very green and spacey, it was almost a neat effect.  After about 5 minutes it started to look a little more digital though.  There were straight lines of this halo effect on the edges and top.  After about 10 minutes it turned into a predominate issue with the blacks on screen.  I could open a web browser and it was unnoticable on a white background.  After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle.  After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange.  But I believe that might be all in my head now.
    So yerp, lemme know what you guys figure out.

  • Whenever I plugged in HP laserjet M1132 printer usb to my Macbook air,a screen pop-out "the disk inserted are not readable by this computer".I uninstalled

    Hi,I'm new here and I think my problem were discussed few times before.However,I tried to follow the solutions similiar to my condition but it does not work.My problem is whenever I plugged in the HP printer (Laserjet M1132 MFP) usb to my Macbook Air,a screen will pop-out and read as 'the disk inserted is not readable by this computer'.I even bought my Mac to the Mac store but the situation remains the same.Okay with other printer but not with my HP.Sigh.The HP printer worked just fine with other computers (not Mac).I'm really sick of it.Please help me.I once plugged in an external hard drive & started Time Machine with it.The printer problem started after that.However, the hard drive plug-in works just fine.
    Your attention of above matter is highly appreciated.Thank you.

    Here is what worked for me:
    I reset the System Management Controller on my MBA.  To do so requires shutting it down, keeping it plugged in to power (I also unplugged both USB connections), and then from a powered off state I simultaneously pressed Shift + Ctl + Option + Power (I did this once and it did not work so I tried again and did it 3 times just to be safe), then released them at once, then I pressed the power button.  Problem solved.
    http://macs.about.com/od/usingyourmac/qt/Resetting-The-Smc-System-Management-Con troller-On-Your-Mac.htm
    I also tried uninstalling the using the repair Disk Permissions with Disk Utility and moved the HP Printer software accessories to the trash (you can search the web for how to do that but that did not solve the problem either).  Neither of these options worked.

  • My MacBook Pro's screen just started randomly going blank, sometimes white sometimes black, and I won't be able to do anything no matter what key I press unless I restart it via the power button and even then I have a few minutes before it happens again

    MacBook Pro's screen randomly goes blank (white sometimes dark), wont be able to do anything no matter what key i press unless i turn it off and on via the power button. When i do that I normally have just a few minutes before it happens again. Bought this back in december just started happening a few days ago. Only thing out of the ordinary I've done is install that microsoft silverlight or whatever it is netflix asked me to install to watch the videos but I uninstalled that quickly hoping it would fix my problem but it hasn't so please help me out if you know what to do

    Try a SMC reset:
    http://support.apple.com/kb/ht3964
    Ciao.

  • When starting the macbook pro, the screen was flashing black and white, then to color to color, any suggestion to fixing this problem?

    When i am starting the macbook pro, the screen was flashing black and white, and then to color to color, and the whole process repeat all over again, is there any suggestion in solving this, or is there no way to solve this and i need to bring it to the apple support?
    My computer Spec:
    Macbook pro Version 2011

    Sounds as if you're having a problem with your GPU (graphics card). Only Apple can diagnose and fix this, so the best thing would be to take your machine into your local Apple Store or an AASP.
    Clinton

  • MacBook Pro Blank Screen (Built - in & External) - continued

    This thread is a continuation of [MacBook Pro Blank Screen (Built - in & External)|http://discussions.apple.com/thread.jspa?threadID=1478474]. The thread was getting too long and some browsers were timing out.
    Thank you,
    Apple Discussions Staff

    I brought mine into the Apple Store last night. I had not left it for service last time as I had not cleared it of some confidential client data. This time, I encountered a much more knowledgeable Genius who seemed to have heard of the Nvidia problem.
    So, my MBPro is on its way to the depot. It will apparently be $310 total, flat fee, supposedly ready within a week.
    I do expect Apple will do the right thing eventually and extend warranties for the defective Nvidia subsystem. However, I can't wait until they do. I need my Macbook Pro to be functional.
    Again, my strong advice...
    *At the first hint you are getting this problem, turn on screen sharing.*
    If you have this specific Nvidia problem, you will still be able to access the machine remotely, which can be incredibly valuable in terms of saving data before you send it for repair. When you hand it over, you will initial a statement saying you have backed up your data and Apple is not responsible if the machine is wiped during repairs. Set up screen sharing so you can operate the machine during the Nvidia failure.

  • Macbook pro as [MacBook Pro Blank Screen ] with voided Warranty ?

    I have the same issue as told in this post.
    MacBook Pro Blank Screen (Built - in & External)
    However, I have manually replace my HDD to another. Since my HDD die before and want a bigger one. And I think my warranty have voided.
    So does it include in the replacement program of the logic board with free of charge ?
    Will apple help me do the replacement if I'm able to charge that fee even my warrany voided ?
    Message was edited by: Marco Leong

    It really doesn't make a bit of difference whether someone else had an experience similar to yours. It's still up to AppleCare to deal with it.
    But you can certainly waste your time here for whatever you think you'll find. Good luck.

  • HT204347 how much is to fix a macbook peo 13' screen?

    H
    how much is it to fix or replace a MacBook pro 13' screen it is cracked

    The most accuate information will be found by takng the MBP to an Apple store genius bar and have the techs give you an estimate  Other users have said they were charged on the order of $350-500 depending on the amount of damage.  But take it in to find out for sure.

  • My Macbook pro desktop screen is white.

    My Macbook pro desktop screen is white. I had it hooked up to my TV and it went white. Everything works except the desktop is white. The launch pad works and the top menu.

    Hi Maclover222,
    Thanks for visiting Apple Support Communities.
    If you only see a white screen on your MacBook Pro, the steps in this article can help:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    I'd recommend starting with these steps:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Best Regards,
    Jeremy

  • Does the macbook have a screen cover that makes it so the person next you cannot see what you are doing?

    does the macbook have a screen cover that makes it so the person next you cannot see what you are doing?

    Hello 23435,
    Welcome to the Apple Support Communities!
    I understand that your iPhone was knocked out of your hand and now it displays blue and black colors on the display. It does sound like this iPhone may need to be evaluated for service. If you would like more information about this process, please refer to the attached web link below. 
    iPhone Other Repair Options - Apple Support
    Have a great day,
    Joe

  • Apple should make a macBook where the screen can turn around and become touch screen, for easier use

    Apple should make a macBook where the screen can turn around and become touch screen, for easier use. especially for when i go to uni

    Why touch and swivel screens arent a good idea on a laptop:
    The so-called Gorilla arm: Gorilla arm is a term describing the tired arms users get after reaching out and touching a screen for a long time.
    Added thickness: Touch screen panels are usually thicker than non-touch ones—especially if the touch panel has an active digitizer for pen support.
    Possibly shorter battery life: Touch screens require more power. Laptop Magazine compared a couple of touch screen laptops with their non-touch counterparts (same model and size) and found that the non-touch laptops lasted over an hour longer.
    Easy to break: Swivel screens are notoriously prone to break, especially the hinge and the cable that feeds the screen from the logic board which is being constantly twisted.
    And thats what the Ipad is for.

  • What is command to open desk top of damaged screen macbook on another screen via firewire?

    what is command to open desk top of damaged screen macbook on another screen via firewire?

    How to use and troubleshoot FireWire target disk mode
    http://support.apple.com/kb/ht1661
    MacBook Pro, Mac OS X (10.6.7), 2.4GHz IntelCore i5 320 HD 8GB RAM

  • How do i fix Macbook pro retina screen lines?

    How do i fix Macbook pro retina screen lines? Little white lines appear everywhere, but i can still see the screen, but it is just uncomortable for the eyes to see them. They are like pixels...

    I have the same problem, especially with Chrome gmail and evernote and it's driving me crazy. Anyone with a solution would be amazing!
    Graham

  • Macbook pro blue screen with spinning disk, won't start up. desperate!!!

    macbook pro blue screen with spinning disk, won't start up. desperate!!!  i'm a student and have a paper due tomorrow.
    my macbook was really sluggish so i ran a hardware test. it said NO PROBLEMS. i did restart. my current login and password were REJECTED.
    then the macbook went into blue screen and it just sits there and flashes to gray and back to blue and the white lines that make up the circle icon just spin and spin. i am DESPERATE to get this running so i can print my paper. please email me directly to my cell phone because i can't access computer. using someone else's computer to request help. DIRECT EMAIL PLEASE   thank you.
    <Email Edited by Host>

    Hi ...
    my current login and password were REJECTED
    Try resetting your admin password >  Mac OS X: Changing or resetting an account password

Maybe you are looking for

  • How can I create a directory on my server using FTP in applescript?

    Hi I have created a script which successfully uploads files to my server using FTP and a curl command. The one thing I haven't worked out how to do is how to create a directory on my server using applescript. At the moment I have to manually create t

  • ID3 Tags won't write to file

    I recently received a disc from a friend, the disc had 16 songs on it, with no ID3 Tag info. I went through and added the missing info manually using the "Get Info" option from the file in iTunes & hit OK, but when I was done, the files look complete

  • ISCSI device mapping on Solaris 10

    Hi, A brief overview of my situation: I have 3 Oracle Solaris X86-64 virtual machines that I'm using for testing. I have configured a ZFS storage pool on one of them (named solastorage), that will serve as my iSCSI target. The remaining 2 servers (so

  • Oracle AQ with Orion 2.0 application server

    Hi, I'm trying to use Oracle AQ/JMS as queue for a J2EE message driven bean running in an Orion 2.0 application server. To connect the bean with the queue I have to configure a resource provider. By now, the only resource provider I found is the clas

  • I can't connect my iPhone

    I click "add new device" go through all the steps, I see wifi signal on my iPhone, but Network Magic doesn't add the new device. Frustated!