Macbook to sony KP-57WV600 rear projection tv problem

I have a macbook with mini dvi to dvi cable (Apple).
I have the Sony tv with dvi in but when I connect the macbook to the tv i get no picture and the macbook doesn't see the tv.
In the tv manual it says the DVI connection is compliant with EIA-861 standard and is not intended for use with personal computers.
Does this mean it just won't work?
Can i connect to the tv by going with Mini dvi to vga and then using s-video cable?
Thanks for any help!
Doug

Did you try connecting the two while powered down, then turning them on? That's what the mac os help recommends. You may need to select the correct input on your tv, also. Both VGA and s-video should work.
Cheers,

Similar Messages

  • Using my MacBook Pro as the host for projection to my TV via AppleTV?

    Can I subscribe to HBOGO thru Apple TV and avoid cable service using my MacBook Pro as the host for projecting to my TV via AppleTV?S

    Possibly.
    Some sites such as TMN GO which is similar will not allow mirroring to take place.
    It works for about a minute then shuts down... Security settings from the site.

  • 30HF85C Rear Projection Hd tv with warped/distorted picture

    I have a 10 year old hd rear projection tv that has a distorted/warped picture. a solid black bar accross the bottom covering about 1/4 of the screen and the picture is being stretched near the top and squished at the bottom above that black bar. I posted a video on youtube to get a better idea of what I'm dealing with. Any advice would be very grateful. https://youtu.be/PKARcOTDKtE

    HDMI carries both sound and video, while DVI only carries video. You'd need something that converts from HDMI to DVI plus an audio cable. Perhaps something like this. Please note that I'm not endorsing this specific product. I've never used such an adapter, so I don't know how well they work.
    - Peter

  • Rear Projection TV 50HDX82 has lines on the screen

    My 50HDX82 rear projection tv has lines running through the picture.  After some time it get's a little better, but still very annoying.  Can this be fixed?

    Toshiba 50"  TV has squiggly vertical lines when turned on.  Last for about 5 minutes then picture becomes quite perfect.  The TV is about 10 years old.  What is the issue and can it be repaired?

  • Macbook Pro Retina keeps restarting "due to a problem" as well as imovie and Skype

    My new Macbook Pro Retina keeps restarting "due to a problem", when I open my skype it crashes and my imovie crashes all the time as well. I just got this computer last week. If someone could please help me out.
    These are the few of the errors on the console utility
    8/25/12 12:19:38.092 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** error: can't allocate region
    8/25/12 12:19:38.092 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** set a breakpoint in malloc_error_break to debug
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: iMovie(694,0xac8ba2c0) malloc: *** mmap(size=1223954432) failed (error code=12)
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** error: can't allocate region
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** set a breakpoint in malloc_error_break to debug
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: iMovie(694,0xac8ba2c0) malloc: *** mmap(size=1223962624) failed (error code=12)
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** error: can't allocate region
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** set a breakpoint in malloc_error_break to debug
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: iMovie(694,0xac8ba2c0) malloc: *** mmap(size=1223974912) failed (error code=12)
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** error: can't allocate region
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** set a breakpoint in malloc_error_break to debug
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: iMovie(694,0xac8ba2c0) malloc: *** mmap(size=979181568) failed (error code=12)
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** error: can't allocate region
    8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** set a breakpoint in malloc_error_break to debug
    8/25/12 12:19:38.094 PM iMovie: *** Canceling drag because exception 'NSMallocException' (reason '*** -[NSConcreteMutableData appendBytes:length:]: unable to allocate memory for length (979177572)') was raised during a dragging session
    8/25/12 12:22:06.000 PM kernel: IOSurface: buffer allocation size is zero
    8/25/12 12:22:07.000 PM kernel: IOSurface: buffer allocation size is zero
    8/25/12 12:23:33.000 PM kernel: IOSurface: buffer allocation size is zero
    8/25/12 12:23:37.000 PM kernel: IOSurface: buffer allocation size is zero
    8/25/12 12:23:37.000 PM kernel: IOSurface: buffer allocation size is zero
    8/25/12 12:23:39.000 PM kernel: IOSurface: buffer allocation size is zero
    8/25/12 12:24:29.322 PM [0x0-0xc50c5].com.skype.skype: DVFreeThread - CFMachPortCreateWithPort hack = 0x22e20e0, fPowerNotifyPort= 0x229f7d0
    8/25/12 12:24:29.322 PM [0x0-0xc50c5].com.skype.skype: DVFreeThread - CFMachPortCreateWithPort hack = 0x263d630, fPowerNotifyPort= 0x26221e0
    8/25/12 12:24:29.322 PM [0x0-0xc50c5].com.skype.skype: DVFreeThread - CFMachPortCreateWithPort hack = 0x263d840, fPowerNotifyPort= 0x2607c90
    8/25/12 12:25:18.000 PM kernel: IOSurface: buffer allocation size is zero
    8/25/12 12:27:27.481 PM com.apple.WindowServer: WindowServer(87,0x7fff74852960) malloc: *** error for object 0x7ff851ba0050: incorrect checksum for freed object - object was probably modified after being freed.
    8/25/12 12:27:27.481 PM com.apple.WindowServer: *** set a breakpoint in malloc_error_break to debug
    8/25/12 12:27:27.798 PM ReportCrash: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
    8/25/12 12:27:28.745 PM SystemUIServer: HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.745 PM SystemUIServer: port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[673:207] HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[673:207] port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[757:207] HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[761:207] HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[757:207] port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.746 PM Finder: HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[761:207] port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.746 PM iTunes: HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.746 PM Finder: port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.746 PM iTunes: port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.746 PM Google Chrome: HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.746 PM Google Chrome Helper EH: HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.746 PM rcd: HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.746 PM Image Capture Extension: HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.747 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper EH[615:b03] HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.747 PM Google Chrome: port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.747 PM Google Chrome Helper EH: port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.747 PM rcd: port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.747 PM Dock: HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.747 PM Image Capture Extension: port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.747 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.746 Google Chrome Helper EH[615:b03] port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.748 PM Dock: port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.750 PM com.apple.dock.extra: HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.751 PM com.apple.dock.extra: 2012-08-25 12:27:28.746 com.apple.dock.extra[143:1707] HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.751 PM com.apple.dock.extra: port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.752 PM com.apple.dock.extra: 2012-08-25 12:27:28.750 com.apple.dock.extra[143:1707] port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.752 PM talagent: HIToolbox: received notification of WindowServer event port death.
    8/25/12 12:27:28.753 PM talagent: port matched the WindowServer port created in BindCGSToRunLoop
    8/25/12 12:27:28.775 PM UserEventAgent: CaptiveNetworkSupport:UserAgentDied:139 User Agent @port=26115 Died
    8/25/12 12:27:28.782 PM com.apple.launchd.peruser.501: (com.apple.Dock.agent[114]) Exited with code: 1
    8/25/12 12:27:28.856 PM Google Chrome: MIG: server died: CGSReenableUpdateForConnections: Failed
    8/25/12 12:27:28.856 PM Google Chrome: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    8/25/12 12:27:28.857 PM Google Chrome: (ipc/send) invalid destination port: CGSSetEventMask: error setting window event mask
    8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSDisableUpdateForConnections: Failed
    8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSReenableUpdateForConnections: Failed
    8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSGetOnScreenWindowCount
    8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSGetOnScreenWindowCount
    8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSGetWindowPresenter
    8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSOrderWindowList
    8/25/12 12:27:28.859 PM Google Chrome: kCGErrorFailure: _CGSLockWindow: Cannot synchronize window backing store
    8/25/12 12:27:28.859 PM Google Chrome: kCGErrorFailure: _CGSLockWindow: Cannot synchronize window backing store

    melirodriguez13 wrote:
    My new Macbook Pro Retina keeps restarting "due to a problem", when I open my skype it crashes and my imovie crashes all the time as well. I just got this computer last week. If someone could please help me out.
    Call Apple Care. 
    #1 - You have 14 days from the date of purchase to return your computer with no questions asked.
    #2 - You have 90 days of FREE phone tech support.
    #3 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years.   You can obtain AppleCare anytime up to the first year of the purchase of your computer.
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. 

  • I'm having trouble opening a word document on my new Macbook Pro. I opened it with no problems on my iPhone5. I tried using TextEdit and OpenOffice. Thanks!

    I'm having trouble opening a word document on my new Macbook Pro. I opened it with no problems on my iPhone5. I tried using TextEdit and OpenOffice. Thanks!

    I open Word documents on my Mac using Pages and textedit without any problems.
    I also have a copy of OpenOffice and it can also open Word documents without any problems.
    Could you please provide more details on exactly what you mean when you say you having troubles opening Word documents? What kind of troubles?
    Allan

  • I cannot connect to FaceTime, encountered "error processing registration, please try later" message on my Macbook Air, but I don't have this problem on my IMac. Can anyone help?

    I cannot connect to FaceTime, encountered "error processing registration, please try later" message on my Macbook Air, but I don't have this problem on my IMac. Can anyone help?

    I have the same problem on my iMac. My facetime has been working, but now I'm getting the same error as You. I've been through the following:
    The stuff that Linc Davis suggested, new profile on iMac, moved iMac into DMZ zone with no firewall rules, tested with other Apple-ID, checked hosts file, checked different timezone settings, tried to connect to 2 mobile APs (with diferent providors), changed DNS servers (ISP's DNS + Google DNS + Open DNS) - Nothing helped. Also talked to Apple Support, since i have Apple Care, but the seem to be a bit clueless also Well I've mailed them the results of my different tests, so lets see what they come up with - Unfortunately I'm sure it will be the same suggestion as all the major PC manufactures suggests, reinstall and test - RIGHT !!!!!!
    If I get solution, I'll post it here.
    Kind Regards
    Kim

  • I'm new to Macbook Pro, and never imagined I would have problems saving bookmarks when I switched to Mac.  Any suggestions with this issue?  And has Apple come up with a permanent fix?

    I'm new to Macbook Pro, and never imagined I would have problems saving bookmarks when I switched to Mac.  Any suggestions with this issue?  I have Safari 6.0.4, and has Apple come up with a permanent fix?

    Triple-click the line below to select it:
    ~/Library/Safari/Bookmarks.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu.* An Info dialog should open.
    Does the dialog show "You can read and write" in the Sharing & Permissions section?
    In the General section, is the box labeled Locked checked?
    What is the Modified date?
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • Re: Error retrieving cache in c# WPF project (No problems in c# WinForms)

    Originally resurrected a long-dead post from 2011 and attempted to hijack it away from the original poster,
    Error retrieving cache in c# WPF project (No problems in c# WinForms)
    but got my inquiry split away to let it stand on its own merits...
    My question is:
    Wondering if anyone could answer... The setup is the same (XP SP3, Coherence 3.7.1.0). GetValues(null) returns different number of values every time.
    More information: the serialized type has just one string property X; push 40000 such items into cache, then making GetKeys(null) followed by GetValues(null) call with 1 sec interval (cache is pre-populated with 40000 items, no insertions/deletions happening):
    Keys 40000, Values 20377.
    Cache is just one storage enabled proxy with schema taken from Coherence example configuration.
    I understand, calling GetValues with null argument is not the smartest thing to do, but the problem is that it affects the number of items returned by the GetValues with a filter passed...

    Hi Thiago V Palmeir,
    Thank you for your response.
    Your problem seems to be about the list of projects in JDeveloper when there are many projects..
    My problem is very different because I have only 3 projects in the application and the problem occurs when deploying to manually added Integrated Web Logic Installation with the domain that I created (not the DefaultDomain created by JDeveloper)..
    In any case, I tried to delete system11.1.1.5.37.60.13, start JDeveloper, and it re-creates the folder. I then re-create the additional IntegratedWebLogic server instance in the application server navigator and try to run my application using that instance of integrated web logic.
    The error still happens.
    Regards,
    Arief

  • Hello everyone...I got my very first macbook pro just today and i have a problem deleting the "test" user account. if i can't delete it, the system won't let me turn off the system. I don't know what to do! HELP!!!!

    hello everyone...I got my very first macbook pro just today and i have a problem deleting the "test" user account. if i can't delete it, the system won't let me turn off the system. I don't know what to do! HELP!!!!

    Have you created another admin user? Go to system preferences click users and click the + to add a user; if you haven't already. Once you have another admin user other then the "test" user make sure you're signed out of the test user account. Sign in with the alternate ADMIN USER that you just created or had created already and go back to SYSTEM PREFERENCES and click the same USERS icon near the bottom. Now select the TEST user and click the - sign. This should prompt you if your sure you want to delete the user account. And your done.
    New User created and Test User deleted... I hope this helps.

  • Hi, my macbook 13" retina [a week old] keeps having problems where the keys/trackpad freeze and other times OS crashes itself. has anyone found/been given a solution? i cant get an applecare appt for 2weeks.

    hi, my macbook 13" retina [a week old] keeps having problems where the keys/trackpad freeze and other times OS crashes itself. has anyone found/been given a solution? i cant get an applecare appt for 2weeks.

    Book your Apple appointment now, in the mean time you can try a SMC reset.
    http://support.apple.com/kb/HT3964
    1 week old !, call Apple and tell them you need a priority appointment at a genius bar.
    http://www.apple.com/support/contact/
    http://www.apple.com/retail/
    1-800-692-7753
    Explain that he MBP is 1 week old, and you need it ASAP, they seem to be very responsive to these kind of issuses.
    All the best

  • Macbook to Sony Bravia - Problems

    Hey -
    So I'm trying to connect my Macbook (I got this back in like 2006-2007?) to my Sony Bravia TV. I have the current set-up:
    VGA Cable connected from the back of the TV to a Mini-DVI-to-VGA connector to the MacBook. When I plug it in, the Macbook detects it (since I can see the MacBook screen adjusting to it) but when I go to find it on the TV (Input/Source), the "PC" option is grayed out. I've been trying everything (Detect Display, etc) for the Bravia to detect it but no dice. Any help would be great.
    For the time being, I'm using a S-Video to Mini-DVI-to-S-Video adapter to the MacBook but the quality is really poor (except when watching movies).
    Is there something else that I need to do?
    Thanks!
    Albert

    hello, people.
    I'm trying to sync my mac to Sony Bravia as well.
    And it was tough.
    But on my last try I find a way.
    You have to put a resolution 640 x 480 on your mac
    and 1920 x 1080 on Sony TV.
    After that, you have to go on menu of your TV and follow the steps:
    ajustes > canais de entrada > controle de entradas
    I know the names in portuguese.
    But in english should be the same.
    And set you PC from AUTO to "SEMPRE"
    The TV is already set on AUTO (automatic)
    It works and I really happy.
    I wish it works for you too
    Good luck

  • Connect Macbook to Sony Bravia HDTV via HDMI?

    I am trying to connect my Macbook to a Sony Bravia HDTV via HDMI, but are unable to get one to recognize the other. I am not sure what the problem is.
    I have the following set up:
    - Macbook 13" (2.16 GHz Intel Core 2, 10.4.11)
    - Apple Mini DVI to DVI adopter
    - 15' DVI to HDMI cable (from monoprice.com, same cable recommended elsewhere in these forums)
    - Sony Bravia KDL46W3000, (Full HD 1920 x 1080 p)
    The Sony tv does not seem to recognise the Mac is connected (and/or vise versa). The screen is just black. Yes, I have tried all 3 of the HDMI inputs on it, Yes, I have set the tv input setting to match the corresponding input jack. HDMI does work on the tv though, as I have a DVD player connected via HDMI and that works fine.
    The Mac Display preference pane does not detect the tv/monitor being connected. I normally use another external LCD monitor with the Macbook via mini DVI to VGA adaptor without any problem. I have tried various solutions others have mentioned for similar problems I found in these forms, such as turning the tv off then on, rebooting the Macbook before connecting, etc. and every other combination.
    An hour on the phone with Sony tech support did not get me anywhere closer other than they say the Mac should recognize the tv as an external monitor.
    Has anyone with a very similar configuration managed to get this to work? Please note, I am well aware that many many people use HDTV's as a external monitor, but this is a Sony Bravia, not a LG, or Samsung, or anything else. Also, it is a Macbook, not a Powerbook or anything else. Also, I am trying to connect via HDMI, and not VGA.
    Any tips or success stories would be appreciated.
    Thanks

    I hooked my Sony .Bravia 40" up to my MacBook with no problem. From your description, it sounds like you may also have a bad DVI->HDMI cable. I'm using the stock Apple miniDVI adaptor mated to my DVI->HDMI cable.
    I was going to go the route you took and use the VGA port on my Bravia, but thought it might limit me to "side" letterboxes since I thought VGA basically stood for 640x480 or 4X3 format. I'm surprised that you get 1920x1080 from a VGA cable. While your picture may be great, by definition I understand high to low video quality in order is...
    HDMI/DVI, Component, s-video, VGA, and lastly, A/V cables.
    My DVI->HDMI cable is a cheapie that I think I bought at Frys. This type of cable is probably getting harder to find as most stuff is straight HDMI now. Anyone thinking of getting a new flat screen should strongly remember to get one with at least 3 HDMI ports unless they are into cable switch-a-roo when connecting various devices. The stock devices today are cable/satellite, Blu-Ray/HD-DVD/DVD and one for the old Mac.

  • Macbook to Sony Bravia HDMI

    Help.
    I have a cable and adaptor to connect my macbook to my sony bravia tv.
    On the TV I get the purpley sunrise picture and if I drag the macbook screen image to the right it appears on the tv (like it is on the next page), but obvioulsly the two are not synching and I have no sound. Help

    Sirmausalot wrote:
    Use system preferences to configure your monitors properly. It sounds like you want 'mirroring' and not dual display
    mirroring on a macbook will only get you 720p. If you want 1080, then you will have to run in "clamshell" mode where you plug in the display, a mouse, & keyboard, close the lid, & then wake it up with the kb or mouse.

  • Macbook to sony bravia tv

    HI I am trying to connect my macbook to my Sony bravia tv using mini display to hdmi but my tv keeps telling me that it out of range, i tried changing the display resolution on my Mac but it didin't make any difference any help would be great as getting frustrated by this
    thanks
    Lynda

    hello, people.
    I'm trying to sync my mac to Sony Bravia as well.
    And it was tough.
    But on my last try I FOUND A WAY.
    You have to put a resolution 640 x 480 on your mac
    and 1920 x 1080 on Sony TV.
    After that, you have to go on menu of your TV and follow the steps:
    ajustes > canais de entrada > controle de entradas
    I know the names in portuguese.
    But in english should be the same.
    And set you PC from AUTO to "SEMPRE"
    The TV is already set on AUTO (automatic)
    It works and I really happy.
    I wish it works for you too
    Good luck

Maybe you are looking for

  • How to change default internet access password in Gateway Max (for cable)

    Hi All, My home boardband (home bundle with cable) connection has just been installed. I am trying to change the default internet access password. But I can not find out where to set the new password in my Gateway Max configuration page (192.168.0.1)

  • Short dump with Where-used list

    Hi All, I'm making some research on specific InfoObjects, and in some cases I want to know where are they being used, but when I try to use the icon for "Where-used list using Data Warehouse" I end up with an error, a short dump. Message class is: RS

  • Exporting audio with a patch?

    I have been using Logic Pro X to record some musical tracks in my studio. The sound quality of the program is phenomenal. I haven't ever had the idea to switch programs, it's just this one thing that gets me. So my question is, How do you export one

  • Using variable in function for FLASH video

    I have a webpage that uses PHP to pull a variable from a MySQL database. I would like to use that variable to tell my flash component what flash video to play. I cant seem to figure out how to place the variable in the function call to make it work.

  • Macbook pro wont shutdown

    macbook pro wont shutdown